anyone know where i can buy touch screen replacement for rb2011UiAS-2HnD-IN locally?

Hi Sifu, I used to use pfsense for more that 10 years. But I am going to turn off my VM to reduce energy usage.
Please recommend me an entry-level of Mikrotik router to achieve function below. I am subscribing to 300Mbps Tm UniFi.

1. Site-to-Site VPN to Surfshark with destination route for certain websites via the VPN tunnel.
2. Road warrior VPN, prefer OpenVPN/Wireguard.
3. Block access to certain websites at certain hour.
4. Working well with TP-Link Deco X20 AP Mode.
5. VLAN separation for IoT/Security devices.

Thank you.

hAP ac2 (Disable Wifi function) should be enough for your usage. (hEX should also suitable but CPU will be a bit weaker)

Thank you. I will have a look at the recommended model.

What is your budget? If below rm1k then get the latest new model RB5009 equipped with 10Gbps SFP+ FTW. Otherwise you can get a hEX S, or hAP ac2 or hAP ac3. But it would be a waste since you already got your own Deco AP, get an RB5009 instead it is using native RouterOS v7 already and support WireGuard and ZeroTier also!

Currently ROS7 still at beta stage... IPv6- DHCPv6 PD not working for Unifi. Better wait for 6month later to get ROS7 only device...
So i suggest in current state and for his requirements just get a device that cost about RM300 is enough for now since it is his first time to join Mikrotik.

Why would you use DHCPv6? Isn't unifi provide IPv6 using stateless SLAAC mode?

Emm actually i not sure,i just follow soonwai 's tutorial to use IPv6 on ROS6,but currently the same way on ROS7 is not working,waiting Mikrotik to fix it.

My budget below RM400. I will check hAP ac2/ac3.
Thank you.

Getting RB5009 soon. Later I check how to configure IPv6 or why it doesn’t work. I also follow the guides previously posted.

ROS 7 bug,Mikrotik forum already have people talks about that,and the latest beta version still not fixed.
Other than that,i also still try to learn how to use the Wireguard as client on ROS7...Trying to redirect china traffic with vpn service to mitigate the crap routing on unifi.
Currently using IKEv2 IPsec VPN on Mikrotik but the cpu usage is quite high when the speed is higher without fasttrack.(VPN usage does not work with fasttrack so cpu usage will be higher)

Already got mine, but can't test yet because my main router has builtin AP inside it so I don't want to disrupt my family's work since they all wfh and using wifi. Am waiting for y U6-LR haven't reach yet.

Nothing has even been stable if you are using ROS, even the their stable version v6 also got bug.

This post has been edited by Gaara92: Nov 7 2021, 01:11 PM

This is one of the reason why I switched from pfsense + ubiquiti to a simple Deco setup. I always test various configuration and it interrupt the home network. Sometimes power outage cause the pfsense not boot up correctly in day time.
End up I decided to moved to a simple solution that my parent know how to reboot a router when I not around.

But after switched for months, I feel paranoid when I don't have access to logs and information from my router, I can't see why the Deco not connect to the PPPoE, no snmp to monitor the usage, etc.

I know right. Being a network admin/engineer is the lust and urge to watch the logs and also the data transfer rate haha

I can't agree more on that. Being look at the log to find out why my PPPoE disconnected, and visualize the data usage in monitoring tool make me feel good.

================================

Can I power up a HP ProCurve 1810G-8 Switch (J9449A) with PoE-Out from hEX S? hEX S come with a default 24V power adapter, and support Passive PoE up to 57V on port 5, while the HP switch support 802.3af PoE in on Port 1.

Do the default 24V power adapter sufficient, or I need to get a higher voltage power adapter?

This post has been edited by loonsave: Nov 7 2021, 09:38 PM

That one is passthrough PoE (iirc), basically if you put PoE in using 802.3af/at, it will came out with the same wattage. I don't know if the device can channel using passive or PoE+, you can try it first.

I found other people having problem with the DHCPv6-PD and it is currently not fixed yet, but other came with solution. I have not try it yet.

Anybody know where I can get RB5009 rackmounting kit (K-79). I asked Subtel but they were showing me the wall mount plugs that came in the box....

I also don't see any in Synchroweb.

I think Subtel misunderstood the item u ask,the box only come with K-55 screw kit,does not come with RB5009 rackmount kit K-79.
Maybe u can ask subtel again?

I know they misunderstood me (I was chatting via lazada chat app). I explained a few times but the other side didn't get it....
I'll probably email to their official site or something.