ROS 7 bug,Mikrotik forum already have people talks about that,and the latest beta version still not fixed.
Other than that,i also still try to learn how to use the Wireguard as client on ROS7...Trying to redirect china traffic with vpn service to mitigate the crap routing on unifi.
Currently using IKEv2 IPsec VPN on Mikrotik but the cpu usage is quite high when the speed is higher without fasttrack.(VPN usage does not work with fasttrack so cpu usage will be higher)

Already got mine, but can't test yet because my main router has builtin AP inside it so I don't want to disrupt my family's work since they all wfh and using wifi. Am waiting for y U6-LR haven't reach yet.

Nothing has even been stable if you are using ROS, even the their stable version v6 also got bug.

This post has been edited by Gaara92: Nov 7 2021, 01:11 PM

This is one of the reason why I switched from pfsense + ubiquiti to a simple Deco setup. I always test various configuration and it interrupt the home network. Sometimes power outage cause the pfsense not boot up correctly in day time.
End up I decided to moved to a simple solution that my parent know how to reboot a router when I not around.

But after switched for months, I feel paranoid when I don't have access to logs and information from my router, I can't see why the Deco not connect to the PPPoE, no snmp to monitor the usage, etc.

I know right. Being a network admin/engineer is the lust and urge to watch the logs and also the data transfer rate haha

I can't agree more on that. Being look at the log to find out why my PPPoE disconnected, and visualize the data usage in monitoring tool make me feel good.

================================

Can I power up a HP ProCurve 1810G-8 Switch (J9449A) with PoE-Out from hEX S? hEX S come with a default 24V power adapter, and support Passive PoE up to 57V on port 5, while the HP switch support 802.3af PoE in on Port 1.

Do the default 24V power adapter sufficient, or I need to get a higher voltage power adapter?

This post has been edited by loonsave: Nov 7 2021, 09:38 PM

That one is passthrough PoE (iirc), basically if you put PoE in using 802.3af/at, it will came out with the same wattage. I don't know if the device can channel using passive or PoE+, you can try it first.

I found other people having problem with the DHCPv6-PD and it is currently not fixed yet, but other came with solution. I have not try it yet.

Anybody know where I can get RB5009 rackmounting kit (K-79). I asked Subtel but they were showing me the wall mount plugs that came in the box....

I also don't see any in Synchroweb.

I think Subtel misunderstood the item u ask,the box only come with K-55 screw kit,does not come with RB5009 rackmount kit K-79.
Maybe u can ask subtel again?

I know they misunderstood me (I was chatting via lazada chat app). I explained a few times but the other side didn't get it....
I'll probably email to their official site or something.

I already asked them. They have not ordered it yet.

I managed to order 1 set from Shopee, shop name is mikrotik.my (from China). I buzzed their shop and they said they have stock, then only listed them in Shopee.

It was better than ordering from Australia, New Zealand, or Europe (all the other places that has stock)

OMG can share the link? I cannot find any rackmount in the shop.

Got my rack mount kit from Synchroweb. They have stock.

I found another one in Shopee -> https://shopee.com.my/Microtik-RB5009-rackm...14-5e20f4cffedd


I hate it when they don't list it in their website .

OMG this one is more cheaper than China one. But I already bought it from China.

Hi. I am new here... just recently got a RB5009.

So far all wonderful, got it working and network runs well.

Only thing I dont get to work somehow is ipv6 with Time Internet.

I get an ipv6 from Time, however my clients dont get an ipv6 and cant connect to any ipv6-address on WAN.

I looked for some kind of tutorial for setting this up, can someone hint me into the right direction or even give me simple instructions?

Would be very much appreciated.

Not sure Time also use DHCP-v6 to get ipv6 address on mikrotik or not. If similar way to unifi,then it is a bug on ROS7,need to wait Mikrotik to fix it. (I think need to wait next year will fix it)

I see.. well then I hope that gets fixed soon...

When adding a DHCP Client in IPv6 I get an IP-address but somehow not able to get it to my other clients...

https://pictr.com/images/2021/11/26/B4D57v.md.png

Home use. Wireless feature unnecessary as I wire-backhaul to 2 Deco M9 Plus.

I am looking into automated failover from primary (1) Unifi (dial out PPPoE) to secondary (2) Huawei B618.

Questions:

(1) I see all Mikrotik 5-port routers have dedicated 1-port WAN. Does this mean I cannot use additional port (s) to achieve multi-WAN?

(2) Mikrotik routers can handle fibre vlan? (already have tp-link vlan switch to (un)tag vlan500 if necessary)

(3) Mikrotik routers can handle DHCPv4? DHCPv6 and/or similar?

(4) Mikrotik routers can do DDNS to any provider? (i use cloudns)

(5) Mikrotik routers have firewall to prevent intrusion from outside?

(6) Mikrotik have access to command line? Is it linux? Can install packages? to run any command?

(7)n Which Mikrotik router is capable of handling 1Gbps fibre? (for future-proof). The Hex?





(w/ tp-link vlan switch, i was already able to use huawei b618 to prioritise dial to unifi and failover to lte-a network. however i was disappointed that the gigabit wan and lan port on b618 was only able to max 171Mbps regardless fibre or lte-a. all cables used during test are CAT6e. replacing b618 back to tm-supplied router was able to get back ~500Mbps as subscribed, so test wasn't influenced by wifi speed.)

This post has been edited by Oltromen Ripot: Nov 26 2021, 04:56 PM