I already asked them. They have not ordered it yet.

I managed to order 1 set from Shopee, shop name is mikrotik.my (from China). I buzzed their shop and they said they have stock, then only listed them in Shopee.

It was better than ordering from Australia, New Zealand, or Europe (all the other places that has stock)

OMG can share the link? I cannot find any rackmount in the shop.

Got my rack mount kit from Synchroweb. They have stock.

I found another one in Shopee -> https://shopee.com.my/Microtik-RB5009-rackm...14-5e20f4cffedd


I hate it when they don't list it in their website .

OMG this one is more cheaper than China one. But I already bought it from China.

Hi. I am new here... just recently got a RB5009.

So far all wonderful, got it working and network runs well.

Only thing I dont get to work somehow is ipv6 with Time Internet.

I get an ipv6 from Time, however my clients dont get an ipv6 and cant connect to any ipv6-address on WAN.

I looked for some kind of tutorial for setting this up, can someone hint me into the right direction or even give me simple instructions?

Would be very much appreciated.

Not sure Time also use DHCP-v6 to get ipv6 address on mikrotik or not. If similar way to unifi,then it is a bug on ROS7,need to wait Mikrotik to fix it. (I think need to wait next year will fix it)

I see.. well then I hope that gets fixed soon...

When adding a DHCP Client in IPv6 I get an IP-address but somehow not able to get it to my other clients...

https://pictr.com/images/2021/11/26/B4D57v.md.png

Home use. Wireless feature unnecessary as I wire-backhaul to 2 Deco M9 Plus.

I am looking into automated failover from primary (1) Unifi (dial out PPPoE) to secondary (2) Huawei B618.

Questions:

(1) I see all Mikrotik 5-port routers have dedicated 1-port WAN. Does this mean I cannot use additional port (s) to achieve multi-WAN?

(2) Mikrotik routers can handle fibre vlan? (already have tp-link vlan switch to (un)tag vlan500 if necessary)

(3) Mikrotik routers can handle DHCPv4? DHCPv6 and/or similar?

(4) Mikrotik routers can do DDNS to any provider? (i use cloudns)

(5) Mikrotik routers have firewall to prevent intrusion from outside?

(6) Mikrotik have access to command line? Is it linux? Can install packages? to run any command?

(7)n Which Mikrotik router is capable of handling 1Gbps fibre? (for future-proof). The Hex?





(w/ tp-link vlan switch, i was already able to use huawei b618 to prioritise dial to unifi and failover to lte-a network. however i was disappointed that the gigabit wan and lan port on b618 was only able to max 171Mbps regardless fibre or lte-a. all cables used during test are CAT6e. replacing b618 back to tm-supplied router was able to get back ~500Mbps as subscribed, so test wasn't influenced by wifi speed.)

This post has been edited by Oltromen Ripot: Nov 26 2021, 04:56 PM

(1) Any interface can be configured as WAN. Even the wifi interface. You can have 4 WAN and 1 LAN if you like.
(2) VLAN, yes.
(3) DHCPv4, yes. The DHCPv6 server in RouterOS 6.x can only give out prefixes not addresses.
(4) Yes, if the provider has some sort of API for updating DNS records.
(5) Comes with a preconfigured but very basic firewall. Up to you to config.
(6) SSH and telnet. RouterOS is based on Linux but cannot install 3rd party packages.
(7) Hex can handle 1Gbps only with Fasttrack running (Mikrotik's term for NAT acceleration). If no Fasttrack, probably RB3011 or RB4011 and above.

This post has been edited by soonwai: Nov 26 2021, 08:16 PM

1.You can use other port for redundancy.Just need to do additional setup.
2.Yes,it can handle the vlan.
3.Yes.
4.You can write your own script to update the ddns or find online.(As long as the router can run the script,then ddns update is easy work for mikrotik)
5.Yes,u can customize the firewall with very specific rule. Like block a specific ip or ip prefix or only allow a port to access by specific ip or anything.(Mikrotik can setup with any rule)
6.Yes,u can access it with telnet or anyway u like,most people use Winbox-Mikrotik official software/app for mikrotik device.
As for packages,no it does not support any application that not provided by Mikrotik.(But ROS7 is providing Docker functionality,so u can install anything that can work in docker)

Hi you need to assign an address to your LAN interface so the ND can send the RA to your clients.

thank you, both.

Thanks for the response.

I actually have IPv6 address lists for each interface .../64...

Guess I need some time over one of the next weekends to figure this all out.

share your ipv6 config or screenshot here.

anyone already try RouterOS 7.1 stable release?
Or better stay at LTS 6.48.6

If you want stability then stay at ROS6 for 1 more years.
If you want new features then u can upgrade to ROS7,but with more bugs. (And also DHCPv6-IPv6 with PPPoE might not functionable without manual workaround)

yup, that corect, but i manage to get ipv6 working on ros 7.1. not sure how i able to do it through

This post has been edited by syahpian: Dec 8 2021, 07:27 PM

mind to share your setting?