Sync it to your Google account. From there, go to Gmail -> Contacts and you can do all the bulk stuffs that is needed to be done. I made a booboo too and I solved it this way :-).

I'm not sure if this has been covered here but I seem to have an intermittent issue of the screen on coming on when I press the ON button. The 3 buttons lights up, screen stays blank. If I hold the ON button longer, I can actually see a faint image of the Phone Options menu in the background. If I hold the ON button even longer, just short of the 8 second reboot, the screen would sudden turn on.

This problem will then manifest itself on the phone until I reboot. Anyone have this problem?

If relating android to windows OS, it's like installing windows7 on non-dualcore pc.... slow?

Or maybe android OS is different from windows OS ... dun require better hardware.

It's not as slow. Trust me, the HTC Hero was slow. :-) The feeling I've got with Spacemoose1's Alpha (or actually SSSerpentine's GSM's Mod of Spacemoose1's port, lol) on the tab is quite snappy. Not bad. But it is a bit cramped though, and with screen rotation being a bit iffy, it's almost entirely landscape, which I hate.

As a rough analogy present honeycomb is just like windows Vista. Lauunch with plenty of grandeur but at end users groan in agony over its bloated software and poor performance. But i believe wait few more months this HC vista will bloom into windows 7. Just have to wait for the improvement as the potential is there. Most important too developers must support this HC OS or we will be using apps underoptimized for it

Honeycomb on single core is probably more like Win7 on single core P4 PC with 512MB RAM, not as smooth as WinXP.

Froyo/Gingerbread on dual core tablet with 1GB RAM (if even possible), is like running Win2K (not as optimized for multicore as Win7) on a new dual core PC with gigs of RAM..

This post has been edited by kmrdeva: Jun 16 2011, 09:56 AM

Hi guys,

Got my SGT back in December last year. Found it abit laggy these days, so decided to change the file system to EXT4. These were the steps I did:

1. Root SGT using zroot - done within few seconds
2. Check if bootloader is signed or not - not signed
3. Installed Titanium, made backup and copied to 8GB ext SD card.
4. Charged battery to 100%
5. Plugged in to PC (on Windows Vista, with Samsung USB drivers installed) once and wait until drivers recognized tab.
6. Put SGT into download mode
7. Flashed using Odin (p1000-mck-r3-ext4-cwm). Waited for 5 mins, then unplugged from PC. Reboot tab.
8. SGT started converting to EXT4
9. After like 20mins, menu came up with few option, I selected reboot tab.
10. SGT seems to be hanging on screen showing Samsung & Galaxy Tab (bricked?). Unable to reboot or reset using Power + Volume Up button.
11. Plug in again to PC, then flash again using Odin (p1000-mck-r3-ext4-cwm)
12. Odin says PASS, SGT reboot by itself and seems to be working fine.
13. Restored backup from Titanium, everything working fine, except only need to change timezone back to GMT+8.
14. SGT running fine for a day now w/o any hanging, etc. All apps seem to be working fine, in fact it seems to be faster than before.

Despite the initial bricking(?), you guys think I missed or did anything wrong?

I want to try again to flash to Overcome 2.0.1 Hermes for Gingerbread following thepitbull's guide.

This post has been edited by exp007: Jun 16 2011, 10:30 AM

From home Press : Menu > Setting > Wireless & Network > Mobile Network > Network Mode > Select WCDMA Only

I am also using Umobile3G. It works flawless. But I am not sure your Modem version (JJ1) suitable for Umobile3G. I am using JPZ version & JM3 before. Both work flawless....

HTH.

also you can bring up the options to display which contact you would like to see.....

IN Contacts, press the menu button (next to home button) and it will pop out Display Option... Choose which ever contact source you wanna display and untick the rest...

JJ1 is the very first early generation modem file. You are probably right - flashing to JPZ or even JMF modem could be better

---

Added on June 16, 2011, 11:45 amI'd suggest next time, if you ever wish to do this again, just flash straight to Overcome 1.6. This is a 2-in 1 solution - cahnge kernel based on ext4 and a recovery installation. The methods you listed were for those early users when Overcome rom than was still infancy stage using RFS file system

This post has been edited by benny888: Jun 16 2011, 11:45 AM

That is the easiest way. But do not solve the issue at all.
Best is log in gmail from PC. Look into Contacts. From the Contact column, there is a merge contact.
Gmail will look up for Duplicates, Triplecates..whatever that is alike & MERGE it.

This is very HELPFUL to me & the reason why I am in love with Android, the OS, not the ROBOT.

---

Added on June 16, 2011, 11:48 amThank you uncle Benny for the verification.

This post has been edited by danieloo: Jun 16 2011, 11:48 AM

No worry i done already by delete it manually. . . .
Btw it seem like new firmware fix ivision board jumping around issue. . . . Wooray

thepittbull - after I update Hermes, the clockwork is gone from application. not provided anymore ?

my still there

I'm using update method via clockwork. you?

fresh install
hehhehhe

Also my widget picker was gone. Had to manually get it.

Updated via no-wipe. Apart from that, i'm liking it. Gonna run it through the mill as a daily driver.

same with u

you have CWM ??

same with u, gone...