Got a question here....
What is the best Thermal Compound to be applied between the Processor IHS and the CPU Waterblock?
Discussion about watercooling and the results, Version 2
Discussion about watercooling and the results, Version 2
|
|
Mar 16 2006, 07:40 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,159 posts Joined: Dec 2004 From: >Taiping,Perak< |
Got a question here....
What is the best Thermal Compound to be applied between the Processor IHS and the CPU Waterblock? |
|
|
|
|
|
Mar 16 2006, 09:53 PM
|
|
VIP
3,773 posts Joined: Jan 2003 From: Anywhere lah...as long got Kopi-O |
QUOTE(zahri @ Mar 16 2006, 06:10 PM) are there any other pump's i can use besides the NIROX p2800 Unfortunately my friend, if the pumps meant to be submerged, it is for a good reason as prolonged usage inline would lead to failure. I believe this was explained before in my guide to WC'ing as certain pumps in order to cut cost use motors which generally generate more waste heat cos their cheaper to make. So I'd say try getting someone to purchase for you an Nirox P2800 which still remians in my books the best budget AC pump in terms of performance Vs. heat dump at the moment. Trust me, do not risk using a submerged pump inline especially if you plan to use it for prolonged hours. OP once ran a setup designed by aleck which utilises 2 Nirox P3800's (Which are actually meant for submerged use due to the heat generated) and both went bust after 2 months of usage. Even in an air condtioned showroomi couldnt find the pump around JB. i did have problem looking around for the fittings. anyways, can i use the same pump and put it in line ? it is 5800 pump. QUOTE(kingmaker_20 @ Mar 16 2006, 07:40 PM) Got a question here.... Still by far for me AS5 unless you're going something more extreme of at least peltier's if not phase changersWhat is the best Thermal Compound to be applied between the Processor IHS and the CPU Waterblock? |
|
|
Mar 16 2006, 10:33 PM
|
![]() ![]() ![]()
Junior Member
480 posts Joined: Jan 2003 From: Cheras, Kuala Lumpur |
@zahri
here's a collection of sub ~RM100 pump tested by amok. have a look, this might help. ==>Watercooling Budget Pump Shoot Out<== Click Me |
|
|
Mar 17 2006, 01:15 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,159 posts Joined: Dec 2004 From: >Taiping,Perak< |
|
|
|
Mar 17 2006, 09:07 AM
|
|
VIP
9,692 posts Joined: Jan 2003 From: Mongrel Isle |
QUOTE(zahri @ Mar 16 2006, 06:10 PM) are there any other pump's i can use besides the NIROX p2800 Hi,i couldnt find the pump around JB. i did have problem looking around for the fittings. anyways, can i use the same pump and put it in line ? it is 5800 pump. You can get Eheim pump from pet shop in Skudai and Tmn Gaya. PM me if you want to find out the actual location. This post has been edited by ALeUNe: Mar 17 2006, 09:08 AM |
|
|
Mar 17 2006, 10:16 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary |
|
|
|
|
|
|
Mar 17 2006, 10:24 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary |
QUOTE(almostthere @ Mar 16 2006, 11:53 PM) Unfortunately my friend, if the pumps meant to be submerged, it is for a good reason as prolonged usage inline would lead to failure. I believe this was explained before in my guide to WC'ing as certain pumps in order to cut cost use motors which generally generate more waste heat cos their cheaper to make. So I'd say try getting someone to purchase for you an Nirox P2800 which still remians in my books the best budget AC pump in terms of performance Vs. heat dump at the moment. Trust me, do not risk using a submerged pump inline especially if you plan to use it for prolonged hours. OP once ran a setup designed by aleck which utilises 2 Nirox P3800's (Which are actually meant for submerged use due to the heat generated) and both went bust after 2 months of usage. Even in an air condtioned showroom thanks bro....Still by far for me AS5 unless you're going something more extreme of at least peltier's if not phase changers i think i have read ur guide or amoks guide before, then i decided to submerged any pump if i cud not find the NIrox P2800. anyways, ALeUNe offered me to pinpoint the shop that sells Eheim Pumps in JB area. Eheim and Nirox P2800 . can the eheim be put in line ? Compared to nirox p2800 ? i know the nirox is a favorite and cheap. @Shah81, I read the shoot out already and have kept a copy of those pages at home, and did go around JB looking for those pumps used in the shoot out. NO LUCK for me. I cud not find any. Thanks To all That Helped. |
|
|
Mar 17 2006, 10:41 AM
|
|
VIP
3,773 posts Joined: Jan 2003 From: Anywhere lah...as long got Kopi-O |
Depends on your budget as the Eheim, be prepared to fork out over RM100 even for 1048 model. But very reliable and has an higher average HMax and QMax
|
|
|
Mar 20 2006, 01:02 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary |
QUOTE(ALeUNe @ Mar 17 2006, 11:07 AM) Hi, erm..You can get Eheim pump from pet shop in Skudai and Tmn Gaya. PM me if you want to find out the actual location. over the weekend i have been out of my house searching for an immersible pump. it seems i cud not find any one of the pumps in amoks guide. i did find a few shops selling eheims. but its pretty darn big to fit in my pc + comes with 2 years warranty ( must be VERY RELIABLE ) . I however did find. an Immersible pump , brand is LOHAN KING , QMAX is 1.5 or 1.8 m , its 1500 L/H for RM 46 ? any comments ? i think i shud just get the nirox from someone in KL. |
|
|
Mar 21 2006, 02:18 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,924 posts Joined: Jan 2005 From: Subang Jaya |
i can try look for Nirox P2800 pump from ikan shop here at subang...
bought once for rm35 there...dunno if they still got it or not d@mn funny la that auntie...the moment i asked her wheather she got nirox p2800 or not....straight away she asked me back.... " mau pakai kasi sejuk itu komputer ka? " |
|
|
Mar 21 2006, 02:33 AM
|
![]() ![]()
Junior Member
277 posts Joined: Jan 2003 From: SJ |
The same thing the auntie asked me when I was there a few months ago
haha |
|
|
Mar 21 2006, 03:44 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned |
Maybe the auntie's son also into watercooling. Maybe he kept on taking the pumps from the shop..
|
|
|
Mar 21 2006, 08:56 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary |
haha....
i tried asking a few shops here selling nirox products, wether they can get me the nirox p2800, the fella said the dealer also dunt have. erm... so have to get from kl lo.... |
|
|
|
|
|
Mar 21 2006, 02:14 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,593 posts Joined: Feb 2005 From: ***Penang*** |
why not try to PM AllnGap and call him to get one for you ??
i mean Nirox P2800 |
|
|
Mar 21 2006, 02:23 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary |
yeah i think i will do that....
maybe is there anyone who could help me get the nirox p2800 . |
|
|
Mar 21 2006, 06:26 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,515 posts Joined: Jan 2003 From: Ipoh/KL |
If you guys need the Nirox P2800 you can pm me. I have some extra stock for sale.
|
|
|
Mar 21 2006, 08:11 PM
|
|
Elite
739 posts Joined: Jan 2003 From: Macau? |
QUOTE(zahri @ Mar 20 2006, 01:02 PM) I however did find. For the pump Qmax 1500L/H, Hmax 1.5m one, can you get the power consumption e.g. 50Watt, 70Watt, 28Watt.. if the pump needs more than 50Watt, then ferget about it.. just get the nirox p2800, it'll get the job done.an Immersible pump , brand is LOHAN KING , QMAX is 1.5 or 1.8 m , its 1500 L/H for RM 46 ? any comments ? i think i shud just get the nirox from someone in KL. QUOTE(MetalZone @ Mar 21 2006, 06:26 PM) Well brother waterer, when is the surprise w/cooling kit preview? |
|
|
Mar 21 2006, 08:32 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,159 posts Joined: Dec 2004 From: >Taiping,Perak< |
Bro amok,Nirox P2800 enough oomph... for super bikes radiator or not
|
|
|
Mar 21 2006, 08:42 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary |
@amok,
yeah bro, i decided to get the nirox , easier. @metalzone, i wanted to get the hydrX from u. still available ? |
|
|
Mar 21 2006, 08:57 PM
|
|
Elite
739 posts Joined: Jan 2003 From: Macau? |
QUOTE(kingmaker_20 @ Mar 21 2006, 08:32 PM) QUOTE(zahri @ Mar 21 2006, 08:42 PM) @amok, bro ferget to ask, you're planning to use it wif what water block.yeah bro, i decided to get the nirox , easier. @metalzone, i wanted to get the hydrX from u. still available ? O.T.... LONG LIVE DIY WATERER |
| Change to: | 0.0264sec
0.63
6 queries
GZIP Disabled
Time is now: 14th December 2025 - 11:32 AM |