Heheheh..... planning to upgrade my gfx soon.... bcoz the aqua is universal....

i'm gonna gone mad later if this bugging pumps problem keeps irritating me and wetting all over my table with water...waduhhhh

last night i try replacing the nirox there with asetek hydor one which i believe was faulty due to lightning strikes on last saturday....i cut the power cable that connected to the 240v - 12v converter (device control) supplied together and connected it back with a direct 220~240v cable... and surprisingly it works ...so the culprit for all this day is not the pump, just the converter device there

but i have some problems in making the pumps suck some waters from the reservoir to proceed into the loop...as it's only sucking on bl@@dy air's inside it..i try to shake the pump and reservoir off but still cannot make the water go trough...waduhh....

all i was hoping now only to get a nice working pumps... so tired oledi after 2 days wetting all my hands in getting these pumps working correctly..

if i'm getting my self an Eheim 1048, do i need to do some minor mods to the pumps apart from changing the barbs? arghh tensi tensi..

Have u put some sealant at input/output Nirox Pump?

dah letak...tp bila part attached & re-attached all the tubes prior to try & error method of changing these pumps make it all wet..aduh...

cannot stand the sound of gruggling like hell from the nirox pump there...then using the hydor back...cannot suck the water through pulak...waduhh

anybody know got any ikan shop in PJ area selling this Eheim 1048 pump?...

Firstly, ur connectors too tight isit? If too tight also the water vacumm edi la. I remember kena this problem when reassembling for my friend his Air Besar. Had to unhook one pipe to let water flow thru. Secondly, is the pump really pumping or not? Best way to test is to rendam it inside a pail and flick the switch. If got air pancut then working la

the connectors using the asetek push-fit one.... i've tried rendam it inside the pail and got water pancut and coming oledi...but when attached it to the system and pour some coolant into the reservoir...the pumps seems like only pumping air through the loops...

i'm thinking of tilting the pump with the reservoir outlet on top of the pump inlet there..hope gravity will do me some goods in helping the propeller jump start with some waters in it...

bro @amok : is the eheim 1048 barbs can be unscrewed and change to my 10mm barbs?...coz see the eheim specs come 1/2" bards as standards...and newb question here... can eheim 1048 enough to push through triple rad...

pump rosak pun tak sedar diri lagi nak pakai triple rad..hahaha

Means kena air lock edi laa fren. Unhook one end of the loop so that water can flow freely then should work out then. And for the eheim pump, see if the threadings allow for ur barbs mounting or not? If cannot then cannot loh. Same for us Nirox users maa. And 1048? Not worth looking at for triple row core usages if mau OC. Bole jalan mmg bole jalan. si sapik78 used to do that on his rig. But better to look at the 1250, D4's or the 50Z if u want serious power. Or check amok's budget pump shoot out review in the stickies.

ya loh bro...i think kena air lock lah there...will try it out later...hopefully everything will be okey lah after this...waduh..

ya lor.. moderno try wha sarjan suggested first annen oni look for new pump.

neway.. ever wonder how the Storm G4 perform with presc"hot"t? I've done some test with the Storm on a Press'Hot" proc yesterday and today... wanna know result? Don't want? ok lar nvm...

Hehehehe, I'm telling you guys neway..

ok.. first this is how it's looks like.



aiyoo... so dull and boring... add uv sikit...



chapalang tubing is uv reactive oso..

let's see what's under the hood.


ok.. Storm on cpu, MCP650, 5 1/2" arcylic bay res, BIX2.. chapalang gas tubing (freshen out of aeroplane brand... and to skint to use my tygons)

Close up of the sexay w/block under uv.


summore..



ok.. enough of the bling-bling.. let's get to work.. after finish assembling (yesterday) I've left it on for about 1 day for leak testing.. so today tested ledi lor...

lesults....
Test rig.. P4 2.4A Prescott, 2 x D43 512KVR, Gecube 9600 pro extreme, enlight 350W psu ( ).. floppy drive, bla-bla-bla and so on.

Stock Idle.


Stock Load


and oc'ed idle


ending.. oc'ed load


.... okay, now to continue back where i left in the phase cooler project.. bye.

EDIT: This is the first time i've got anything below 48C load with my preschott

BY THE WAY.. PLEASE CHECK THIS OUT --->JENG JENG JENGGGGGG...

This post has been edited by amok: Jan 19 2006, 08:38 PM

wan to ask the sifu's n guru's. wat the diff wif powerhead n waterpump biasa? can use powerhead in closed loop ah?

errrr... pardon my noobiness, but whats a powerhead pump? Is it a submerged pump or pond pump or types of pump or brand of pump or.. ? aiyaaa carrraambbaaa... gong xi fa cai.

metalzone bulkers.... show some results, pics, watever ler...

yalar... i also wanna see ler...

Mebe they buy all those things to cool down the fishtank so the fish happy? Hahahahhaa.

http://www.ocforums.com/showthread.php?t=434856

One thing quite scary about it. The GPU block is SOLDERED with silver on it. If the joins suddenly give way. Say bye bye.

IMO, safer to have just one block of copper. lol But it will be hard to produce as the copper block has to be HUGE to begin with.

But the surface area of this thing sure beat most of the waterblocks in the market right now. More surface area = more cooling capacity.

This post has been edited by kcnyc: Jan 28 2006, 04:49 PM

guys..i wanna know how is Aquagte Mini R120's performance compared to Ninja Scythe?

Is the margine in difference big? or just a few celcius?

i would say just stick with ninja perhaps

I'd second that....

As far as BANG for BUCKS concerned, go with the ninja... wachaaaa..arigato gonzaimas.

GONG XI FA CAI.

c'mon2 metalzone bulker.... 2nd call.

Hi everybody , i really noob in WC, anyone know how to join the tubing properly, does it need any glue or special things? I brought a WC kit from ngbh bulk, planning to change the pump but lacking knowledge about taking out the tube and reapply properly to prevent leakage, is it just enough using cable tie to tied up the tube? plus, anyone know how to flush and refill the thing without reservoiur???

I also got the syscooling package 3 fom ngbh. I didnt try to change the pump or water and so on. But i got one heck of trouble trying to install the heatsink to the chip. Apparently this cooling system is for Socket A and Pentium only. There no clip for S939. And the mount for the graphic chipset was too small for my graphic card and i got to make a mount of my own using aluminium tin.

This post has been edited by woopypooky: Feb 3 2006, 11:28 PM