Outline ·
[ Standard ] ·
Linear+
Discussion about watercooling and the results, Version 2
|
woopypooky
|
 Feb 3 2006, 11:25 PM
|
|
QUOTE(lichyetan @ Jan 31 2006, 03:28 PM) Hi everybody  , i really noob in WC, anyone know how to join the tubing properly, does it need any glue or special things? I brought a WC kit from ngbh bulk, planning to change the pump but lacking knowledge about taking out the tube and reapply properly to prevent leakage, is it just enough using cable tie to tied up the tube? plus, anyone know how to flush and refill the thing without reservoiur???  I also got the syscooling package 3 fom ngbh. I didnt try to change the pump or water and so on. But i got one heck of trouble trying to install the heatsink to the chip. Apparently this cooling system is for Socket A and Pentium only. There no clip for S939. And the mount for the graphic chipset was too small for my graphic card and i got to make a mount of my own using aluminium tin. This post has been edited by woopypooky: Feb 3 2006, 11:28 PM |
|
|
|
|
|
woopypooky
|
Feb 4 2006, 02:52 AM
|
|
|
for cooling, it was promising. Before that my graphic card was 51C idle and 66C load, after installed it 42C idle and 48C load.
The only trouble is that the included mount is not suitable for S939 and bigger graphic card.
BTW how to capture screenies?
|
|
|
|
|
|
woopypooky
|
Feb 5 2006, 06:14 PM
|
|
|
here is it. http://ho5t.us/show.php?locm=3b87a3a5b6.jpgcant post proc becos still cant figure out what to use as mount. |
|
|
|
|
|
woopypooky
|
Feb 7 2006, 12:45 AM
|
|
|
sorry  |
|
|
|
|
|
woopypooky
|
Feb 8 2006, 01:51 AM
|
|
|
not yet, anyway i dunno how to overclock my processor so i guess stock cooling will be enough. u wan buy tis product u better make sure u find the mount is suitable first for ur cpu. The heatsink for motherboard, gpu and cpu i think is okay for all types. The mobo mount also okay. Only the gpu and cpu mount doesnt fit S939 & geforce6800 series and above i think.
This post has been edited by woopypooky: Feb 8 2006, 01:59 AM
|
|
|
|
|
|
woopypooky
|
Feb 8 2006, 10:36 PM
|
|
|
QUOTE(Prokutiwuti @ Feb 8 2006, 09:46 AM) I'm also use WC kit bought from ngbh bulk and yes, it's not suitable for socket939 on some mobo. Already spoilt my DFI infinity becoz of steel plat that put at the back of mobo.Sent for warranty claim yesterday  So, I bought another DFI infinity board and use the backplate that comes with mobo and now everything works fine. my idle temp for venice 3000+ E3 is 36C and 30C at night or cold day. Will post pic asap.  hi, sorry if i go off topic awhile. i see on ur spec there u got 2 identical rams? can it run on dual channel? cos i see on ur picture , u put those two at the same DIMM colour. Mine also put on both same DIMM colour and why it doesnt run on dual channel ?. If wan to run on dual channel need put on different colour or same DIMMs colour? or every board isnt the same? |
|
|
|
|
Quote
0.0415sec
0.50
7 queries
GZIP Disabled