I have a few questions about Unifi.

Number one, i heard there were some security problems last time about unifi. Is it rectified now? If no, how to rectify it?

Secondly, is the router really THAT bad? If it is, can change to our own?

Gonna change unifi soon, but is there any issues i should look out for before/when switching over to unifi?

Can anyone help me? Any agent or UNIFI personel... sigh... I registered with Unifi booth last week near my house in Venice Hill Cheras... problem is after a week, still no news.. i called the agent, he ask me whether i receive email, i said no.. n he said he'll check n get back to me.. i called next day, he ask same thing n give me same answer...

I call UNIFI hotline to register myself since agent is so slow.. The first time i call, the CS say my area is not covered.. But my neighbor has already installed UNIFI.. so i duwan to waste my time to talk to her n called again n diff person pick up.. this time that fella say MY FLOOR DOESNT HAVE UNIFI and oni 9th and 23rd floor got.. he say my condo has 24 floors all together.. so i was like WTF LA.. cuz my condo oni got 14 floor.. where he get another 10 floor.. i slam the phone and went online n check...

When i go online n register.. THE WHOLE ADDRESS OF VENICE HILL IS MESSED UP.. EVERYTHING IS WRONG.. i dont see my house number in it... 24th floor, 23rd and 22nd came up... so wtf..

i called TM n they say they r checking.. checking my foot.. agent also say checking, UNIFI also checking.. 3 days already say same thing.. ITS JUST A f***ING ADDRESS... my neighbor has UNIFI already because her hse address is listed...

Anyone can help me to make this whole process faster.. n just get them to come n install ASAP. damn TM!

Bought the RB750G from landasan yesterday, got the unit from Khairi, a very nice guy. Thanks bro will chat with you again soon.

Just finished the basic configuration with the help from klseet's and oreomambo's config guide. Bro klseet, your webpage guide is very good (I just configure for PPPoE only no IPTV as I don't have enough gigabit port lol) without it I'll have sleepless nights and pulling my hair out lol.

Bro klseet, may I suggest you include this step in your webpage guide?

3) Create a PPPoE interface and have it attached to the vlan ID 500 that you've created above. Ensure that the Enable service tag is unchecked. (Source from oreomambo)


Feel free if you want to use my screenshot

PS. I've changed the MTU to 1492 from 1480 (1492 is from the Dlink DIR-615 router), to test utorrent speed. Everything seems to be working very good except utorrent. Utorrent speed seems to be slower and not so stable compared to the DIR-615 as I was able to get full speed. Any RB750G user experiencing the same problem? I'm currenly using UPNP, might try to use manual port forward to see if the speed improve. Hope the sifus here can point me to the right direction.

Thanks!

Mine you?here is not support center, and one more note, register at booth is not belongs to Telekom but their agent, if you want to fasten process, register at TM shop.

my housing area in selayang already completed installation 5 months ago, a huge 40 feet billboard estimated to be worth at least RM50k is also been put up 2-3 months ago saying "UniFi is now here". which is approximately 30 meters away from my house.

When I applied, they said sorry sir, your area is not covered. How this people running the company ? For god sake, its a bloody public listed company with RM billions of turn over and how can such mistake be made ?

This post has been edited by rattan: Jan 12 2011, 02:03 AM

i had the same problem also, Every other floor on my building edi got covered my floor wasnt. I emailed Unify support. and while waiting, i kept on trying and manage to apply. so i applied before unify replied to my email. Try again - keep on trying. I think its the OCC website. Keep trying until your application is succesful. dont give up. !!

how do i restrict the MAC address for the DIR-615 router ?

i use to have WPA/WPA2 enable by default, but it keep dropping my iphone connection non-stop.

PC and notebook non affected, can't figure out any solution other then changing it WEP.

DIR615 user manual see pages 29 -> http://www.megaupload.com/?d=R8IBU8UU

please take note that MAC filter will enable for both wired and wireless

Courtesy from TP-Link representative Oscar from LowYat Plaza, who passed me the new TL-WR841ND Ver:7.2 yesterday for testing!

I tested this hardware with the beta firmware on my FTTH Huawei HG850a, left it on stress test since last night with uTorrent & IPTV (HD channel 144) continuously for more than 15 hours, no problem at all!

Document updated here: http://klseet.com/index.php?option=com_con...e&id=7&Itemid=6

TP-Link still need more time to finalise testing & internal QA procedure before releasing the 841 official firmware.

Also started to discuss next higher-end device, most likely TL-WR1043ND, will start after the 841 official, stay-tuned for more update!


Yes I do notice the setup document need further detail & explanation, give me sometime I'll update it accordingly!

This post has been edited by klseet: Jan 12 2011, 10:38 AM

Hi all,

I just need an honest opinion from u guys. I'm currently using Streamyx 1MB package and my monthly bill is about RM110. I'd say I'm an average downloader (tv series, movies and games) and video streaming usage is quite a lot. I'm currently living in an apartment at Kota Damansara so I know it's already covered. I'm currently looking at the VIP5 package.

My concerns:

1. So if you were me, would u upgrade to Unifi?

2. Another thing is my current devices are the D-link 520B modem and the Linksys WRT54GC router. Do I need to get a new router if I use Unifi?

3. If the usage cap is implemented, how much would the speed be throttled? Is it true about the daily cap?

Thanks!

Please take the effort to read back a few pages of this thread before asking your questions. All your 3 questions have already been asked and argued in the past few pages. Thank you so much.

---

Added on January 12, 2011, 12:08 pmYou already tried changing both channels (don't leave at auto) and channel width? Note that WEP encryption is very insecure even when used along with MAC filter.

This post has been edited by charymsylyn: Jan 12 2011, 12:11 PM

Wow thanks klseet, I will be waiting for that firmware upgrade for 1043ND,
Just bought mine last saturday and its a sturdy piece of engineering. The wireless connection is the most stable I've seen in a while (used to have a belkin and a netgear)

Thought that I could just swap the DIR 615 crap. After replace realized it didn't work Arrghhh! then only surf the web to find solution and found out why it doesn't work (monopolistic tm )

Came upon yours and rizvanpr website which is a godsend ...... suddenly there is light in the dark tunnel!!

Worked late last night and came home to solve my problem with rizvanpr's steps to make DIR 615 into a VLan bridge ... and it worked!
Now I have a gigabit lan with Wireless N capable of transfering 300Mbps to my Ipad and Android phone,

But whenever I see that that ugly white and orange box with the two silly white horns I get damn angry again, I feel like TM is taunting me because my connection from the DIR 615 to the 1043ND is still at 10/100 Mbps.

Now you have brought me the greatest news of all ..... a firmware that will allow me to configure the 1043ND to have VLan so I can have pure gigabit joy
Thank you thank you thank you to TP Link ... you rock!


question - would my connection to the IPTV STB be a gigabit connection too ???

brianiac,
Gigabit connection, actual speed how much u get?

ohh shit...mom disturb me sleep tell me how come voip phone not workin..internet fine pulak ni..nid call unifi centre..

Anybody able to make the vlan bridge for DIR615 G2?
I try all night follow rizvanrp guide, but no luck at all.
=.=

This post has been edited by fenixchoo: Jan 12 2011, 01:43 PM

About 4.98MBps both ways.

But the funny thing is that when I use speedtest.net to measure it places my IP in Sarawak (spinning pyramid)-- why leh?

---

Added on January 12, 2011, 2:04 pmCould be a couple of things

USE Method 2 - which is manual, I also assume you have used the correct ports ie Port 1 of GPON to WAN port of DIR 615; Port 3 of DIR 615 to WAN Port of your router

1. you need to make sure you physically switch off your DIR 615 for it to reboot properly (i made this mistake and when I actually pulled out the plug and put it back it worked)

2. You will need to switch on your devices in a certain order. Switch off all your devices, then switch on the Huawei GPON modem first, make sure all the lights are on.
then switch on your DIR 615, make sure the "on" light is green and the internet (globe) light is orange, and port 3 light is green. Then switch on your router.

I think its because the DHCP is still on for the DIR 615 - ie I presume port 1 and 2 can be still used as a normal LAN connection.

The other thing I did (which was not in the guide) was to make sure my router was a different IP address to the DIR 615 eg
DIR 615 is set at 192.168.01 as default so I reconfigured my router to be 192.168.1.x.

---

Added on January 12, 2011, 2:08 pmActually what I did was maintain my copper line phone and ask my family members to use the VOIP to call. additional RM 25 permonth

This post has been edited by brianiac: Jan 12 2011, 02:08 PM

anyone here using Unifi for high-rise building? (VDSL2)

care to share your experience?

I stay on 7th Floor of a condo, and subscribed to VIP5. Manage to get +/- 5mbps on speedtest.net to local servers. Still feel ok using internet, though I am not able to access to gmail (so far i managed to test) using TM's DNS. I changed to google's and it's fine. Since then google's DNS all the way, hence don't know what other sites i can't go.

Thanks for the extra guide.
Yes, the DIR615 G2 LAN 1/2 still can login to WebGUI. 192.168.1.x
I use DIR615 B2(this model not from TM, older n better model i bought for my streamyx) as my custom router.
My B2 always stable when utorrent.

Anyway, I'll try again tonight.
Hope the DIR G2 will also work, i notice rizvanrp guide is for DIR615 G1,
i am just trying my luck.

Later will post my B2 log for sharing.

Thanks ya.

P/S:
My connection

GPON LAN1 <=> G2 WAN PORT
G2 LAN 3 <=> B2 WAN PORT
*G2 WiFi OFF

me is 20th floor...speedtest show me 4.89mb for dl and 6.12mb for up


my condo people who subcribe unifi voip down..sien