Unifi Official TM UniFi High Speed Broadbrand Thread V8, save RM200 from 15 January-15 February !
|
|
 Jan 12 2011, 01:43 PM
Return to original view | Post
#1
|
 
Junior Member
18 posts Joined: Dec 2010  
|
Anybody able to make the vlan bridge for DIR615 G2?
I try all night follow rizvanrp guide, but no luck at all. =.= This post has been edited by fenixchoo: Jan 12 2011, 01:43 PM |
|
|
Jan 12 2011, 04:23 PM
Return to original view | Post
#2
|
|
Junior Member
18 posts Joined: Dec 2010
|
QUOTE(brianiac @ Jan 12 2011, 01:52 PM) Could be a couple of things Thanks for the extra guide.USE Method 2 - which is manual, I also assume you have used the correct ports ie Port 1 of GPON to WAN port of DIR 615; Port 3 of DIR 615 to WAN Port of your router 1. you need to make sure you physically switch off your DIR 615 for it to reboot properly (i made this mistake and when I actually pulled out the plug and put it back it worked) 2. You will need to switch on your devices in a certain order. Switch off all your devices, then switch on the Huawei GPON modem first, make sure all the lights are on. then switch on your DIR 615, make sure the "on" light is green and the internet (globe) light is orange, and port 3 light is green. Then switch on your router. I think its because the DHCP is still on for the DIR 615 - ie I presume port 1 and 2 can be still used as a normal LAN connection. The other thing I did (which was not in the guide) was to make sure my router was a different IP address to the DIR 615 eg DIR 615 is set at 192.168.01 as default so I reconfigured my router to be 192.168.1.x. Yes, the DIR615 G2 LAN 1/2 still can login to WebGUI. 192.168.1.x I use DIR615 B2(this model not from TM, older n better model i bought for my streamyx) as my custom router. My B2 always stable when utorrent. Anyway, I'll try again tonight. Hope the DIR G2 will also work, i notice rizvanrp guide is for DIR615 G1, i am just trying my luck. Later will post my B2 log for sharing. Thanks ya. P/S: My connection GPON LAN1 <=> G2 WAN PORT G2 LAN 3 <=> B2 WAN PORT *G2 WiFi OFF |
|
|
Jan 12 2011, 09:54 PM
Return to original view | Post
#3
|
|
Junior Member
18 posts Joined: Dec 2010
|
QUOTE(brianiac @ Jan 12 2011, 01:52 PM) Could be a couple of things Thanks everybody. Many thanks. USE Method 2 - which is manual, I also assume you have used the correct ports ie Port 1 of GPON to WAN port of DIR 615; Port 3 of DIR 615 to WAN Port of your router 1. you need to make sure you physically switch off your DIR 615 for it to reboot properly (i made this mistake and when I actually pulled out the plug and put it back it worked) 2. You will need to switch on your devices in a certain order. Switch off all your devices, then switch on the Huawei GPON modem first, make sure all the lights are on. then switch on your DIR 615, make sure the "on" light is green and the internet (globe) light is orange, and port 3 light is green. Then switch on your router. I think its because the DHCP is still on for the DIR 615 - ie I presume port 1 and 2 can be still used as a normal LAN connection. The other thing I did (which was not in the guide) was to make sure my router was a different IP address to the DIR 615 eg DIR 615 is set at 192.168.01 as default so I reconfigured my router to be 192.168.1.x. Finally, My DIR615 B2 is up as custom router and wireless AP.  Stable  on BT and WiFi.  Using DIR615 G2 as VLAN bridge. (follow rizvanrp guide)  Some change from yesterday configuration. This time i setting=> WAN Conn 1 static IP 192.168.100.100/24 vlanid700 vlan priority 1 WAN Conn 3 vlanid500 vlan priority 2 Attached Log from my B2 [INFO] Thu Apr 29 07:10:36 2010 Starting WAN Services [INFO] Thu Apr 29 07:10:36 2010 WAN interface is up. Connection to Internet established with IP Address 110.xxx.xxx.xxx and default gateway 219.93.218.177  [INFO] Thu Apr 29 07:10:36 2010 PPP network up with IP Address 110.xxx.xxx.xxx  [INFO] Thu Apr 29 07:10:36 2010 WAN interface is down  [INFO] Thu Apr 29 07:10:36 2010 LCP sets local options: ACCM: 00000000, ACFC: 1, PFC: 0, MRU: 1492 [INFO] Thu Apr 29 07:10:36 2010 LCP sets remote auth: C023 [INFO] Thu Apr 29 07:10:36 2010 LCP sets remote options: ACCM: FFFFFFFF, ACFC: 1, PFC: 0, MRU: 1492 [INFO] Thu Apr 29 07:10:36 2010 PPPoE session 0x046E established [INFO] Thu Apr 29 07:10:35 2010 PPPoE confirming session offer [INFO] Thu Apr 29 07:10:35 2010 PPPoE received session offer [INFO] Thu Apr 29 07:10:35 2010 Trying to establish a PPPoE connection [INFO] Thu Apr 29 07:10:35 2010 Attempting to start always-on WAN connection [INFO] Thu Apr 29 07:10:35 2010 Bringing up WAN using PPPoE [INFO] Thu Apr 29 07:10:35 2010 WAN interface cable has been connected [INFO] Thu Apr 29 07:10:35 2010 LAN interface is up [INFO] Thu Apr 29 07:10:35 2010 LAN Ethernet Carrier Detected [INFO] Thu Apr 29 07:10:35 2010 Device initialized [WARN] Thu Apr 29 07:10:35 2010 gw_wireless_schedule init Speed for my VIP5   This post has been edited by fenixchoo: Jan 12 2011, 09:58 PM |
|
Topic ClosedOptions
|
| Change to: |  0.0330sec
 0.55
 7 queries
 GZIP Disabled
Time is now: 8th December 2025 - 09:55 AM |
Quote