Once again thx Calvin for the update!
Yes, hope someone who has prior experience to import such item into KL come to help out members here.
Meantime, I'll try to contact Solitan for the arriving schedule and will keep you guys posted!

WAH, D3vilsim, even your model is not listed there and we are still have no glue on the vlan?.500 on Broadcom, you still dare to flash ...
Really admire your courage ...

Anywhere, few questions:
1. exactly what model is yours?
2. which built you are using?
3. you sure that vlan? is the one you connect for WAN?

It's strange, since you can save & reboot with the vlan?.500 intact, it should have tag the traffic....

Can you try to use the DIR-615 follow Riz method to configure as bridge, then use that vlan? without any tagging to connect pppoe and see whether it works.
This is just to re-confirm exactly which vlan? is using on your router before further testing.

klseet,

hehe.. dont care la. just wan to try out and get solution asap so can pack that 615. =P

1.Model : WRT54GL v1.1
2. Build 14896
3. If i am not mistakan Vlan1 is for my router WAN port right ?? sorry really confuse on this.

this is my vlan detail :

root@WRT54GL:~# nvram show | grep vlan.ports
vlan0ports=3 2 1 0 5*
vlan1ports=4 5
size: 22801 bytes (9967 left)



root@WRT54GL:~# nvram show | grep port.vlans
port5vlans=0 1 16
port3vlans=0
port1vlans=0
port4vlans=0
size: 22801 bytes (9967 left)
port2vlans=0
port0vlans=1


root@WRT54GL:~# nvram show | grep vlan.hwname
vlan1hwname=et0
size: 22801 bytes (9967 left)
vlan0hwname=et0

Without tagging, can you connect pppoe through DIR-615 as bridge mode?

WRT54GL seem to have a Broadcom BCM5352@200mhz --> it's the same with my Buffalo WHR-HP-G54
Strange, how come yours can save reboot and the WAN port assignment still there whereas mine is gone??

Base on the current list:
http://www.dd-wrt.com/wiki/index.php/Route...7t_support_VLAN
this 2 has "Yes" on the "Port-based VLAN's":
WRT54G v6.0 BCM5352E
WRT54G-TM v1.1 BCM5352E

hmmmm....


This post has been edited by klseet: Sep 2 2010, 09:59 PM

Hmm.. let me try and update u tomorrow k. headache..

EDITED : Ops sorry forgot to tell u. At 1st mine one also lost the tagging after reboot. So i try to "tick" the tagged check box at VLAN tab. After i done the tagging setting at Network tab.

sequence as : tag Vlan1.500. (Apply setting) then go to network tab tick the tagged check box ( apply setting )

reboot 2 times the tag still there.



Just to share. Using homplug with extension cord.

Homeplug network light on "Orange" but seems like no speed or quality affect.



This post has been edited by D3vilsim: Sep 2 2010, 10:05 PM

That's interesting, I'll check it out later .....

Guys is it possible I use the VDSL modem to connect directly without using the router??

Guess till now you can only use MikroTik RB250GS then you can use other router. But is your router totally Dead DIR-615?

im actually on VDSL coz I live at an appartment.. so was just wondering can just dial up directly tru the vdsl modem.

the DIR-615... it kinda like can ON.. but I cannot access the router at all, done hard reset still cannot

Darn, Thought you still can acess the Router so you can still use it as as VLAN... guess you have to call them

Hi,

would appreciate some suggestion, i would like subscribe to unifi.

my apartment have telephone point in all bedrooms and the living hall, i actually intend to put the splitter, btu and the PG in my study room and pull the wires to the STB in the living hall. is that convenient?

would the wifi signal be weak in the hall? because my study room door is always close.

thanks

Should be no problem I guess. But as you can see their Modem Router has very weak signal for Wifi. Mine so far so good. 2 floor building. Downstairs WiFi working good.

wow thanks for the quick reply

i have another question though, cause no exp with unifi, i want to connect a few things to the internet at one time but do not know the best way , perhaps you can advise.

need to connect

In Study
-Desktop PC (1)
-Laptop (1)
-PS 3

In Living Hall
-Laptop (1)
-TV (Live update)
-Blu Ray Player (Add downloads)
-Media player (for streaming video)

Much appreciated

An organizations that limit 5MB/sec to each MAC connected...

Since the BTU will be in your study, so should the DIR 615. Unless you have already or are prepared to pull Cat5e cables from your study to the rest of your apartment, here are your options:

In Study
-Desktop PC (1) -->RJ45 to LAN (1) port of DIR 615
-Laptop (1) -->Wifi
-PS 3 -->RJ45 to LAN (2) port of DIR 615

In Living Hall
-Laptop (1) -->Wifi
-TV (Live update) -->Am assuming this will be the IPTV STB; A pair of Homeplugs to LAN Port 4 of your DIR 615
For these:
-Blu Ray Player (Add downloads)
-Media player (for streaming video)

I would suggest you use your last remaining LAN (3) port of the DIR 615 to connect via another pair of Homeplugs to a switch, to which your equipment are to be connected.

Hi D3vilsim, I have no problem with UNIFI, but as my post earlier, can you explain why the packet loss test failed to carry out?

Both my home plug are on superb (green) mode

Is the called ID a free service from Unifi?

Hi, I am not pro in networking. But packet lost can be many reason start from cabling Lan & phone & wifi. U shall try ping in LAN.
Mine also facing packet lost sometimes ..

As for the router... i don't even think is stable even on LAN.

Hope can get solutions fast to completely replace the router. pack it and keep in store room.

So,

In term of downloading,

VIP5 = 500KB/s
VIP10 = 1000KB/s
VIP20 = 2000KB/s

Is this right? cause I haven't been able to reach more than 1000KB/s for VIP10.

we are using a similar one in office, it dies out every few hours be it LAN or wireless.... all of us got fed up and its not being used at all now

how u make payment ? maybank2u ?