Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
121 Pages « < 86 87 88 89 90 > » Bottom

Outline · [ Standard ] · Linear+

Unifi Official TM UniFi High Speed Broadbrand Thread V6, News: RM200 for installation after Sept

views
     
simpul
post Sep 2 2010, 02:34 PM

Casual
***
Junior Member
326 posts

Joined: Jun 2007
From: Denai Alam



taman melati got unifi?
ps3roxor
post Sep 2 2010, 02:36 PM

Getting Started
**
Junior Member
181 posts

Joined: Feb 2009
QUOTE(cannavaro @ Sep 2 2010, 05:45 AM)
Are you on wireless?
*
Yep
rizvanrp
post Sep 2 2010, 03:23 PM

Getting Started
Group Icon
Elite
195 posts

Joined: Sep 2006



QUOTE(sohlican @ Sep 2 2010, 05:10 AM)
Great! I signed it coz I need them to go as I need my sleep coz I work midnight.

Do you mind login into the ZTE BTU and take a screenshot of that Voice Setting Page for me?

Thanks.

I need some settings if you don't mind typing it.

SIP Proxy
Port

Outgoing SIP Proxy
Port

SIP Registrar
Port

Authentication name format

Thank you again.
*
Hey sohlican, I don't have a ZTE BTU but I pulled these settings from the running-config of my Fiberhome through the console interface. Hopefully it has what you're looking for smile.gif

CODE
!sip protocol config---------------------
set authname-postfix @ims.tm.com.my
set escape [enable|disable]
set sip timer T1 500 T2 4000 T4 5000
set special ring temp 1 400,200,400,2000
set special ring temp 2 400,200,400,2000
set special ring temp 3 400,200,400,2000
set special ring temp 4 400,200,400,2000
set special ring temp 5 400,200,400,2000
set special ring temp 6 400,200,400,2000
set special ring temp 7 400,200,400,2000
set special ring temp 8 400,200,400,2000
set special ring temp 9 400,200,400,2000
set special ring temp 10 400,200,400,2000
attach port 16 to special_ring_temp 1
set reg enable
set registrar ims.tm.com.my transport udp port 5060
set proxy 10.225.0.1 transport udp port 5060
set expire-time 3600
set port 0 pole 2
set port 1 phone-number +603770rizzy
set port 1 need-proxy enable
set port 1 caller-id mdmf
set port 1 auth-name +603770rizzy password rizzy's_pass
set port 1 call-waiting disable
set port 1 call-conference disable
set port 1 forward-num +603770rizzy
set port 1 pole 2
set port 2 need-proxy enable
set port 2 caller-id mdmf
set port 2 call-waiting disable
set port 2 call-conference disable
create profile port1
set profile port1 silence_mode compress
set profile port1 soft_noise enable
set profile port1 second_dial normal
set profile port1 echo_cancel disable
set profile port1 gain 0
set profile port1 input 0
set profile port1 jitter_Buffer 40
create profile port2
set profile port2 silence_mode compress
set profile port2 soft_noise enable
set profile port2 second_dial normal
set profile port2 echo_cancel enable
set profile port2 gain 0
set profile port2 input 0
set profile port2 jitter_Buffer 40
attach profile port1 to user 1
attach profile port2 to user 2
set local port 5060
set DnsServer 0 0.0.0.0
set conference mode 0
set attented transfer code *12*
set unattent transfer code *12*
set dialplan notify unambiguous
set keepalive used disable
set caller-id modify-time off


Full authname format should be like "+60377000000@ims.tm.com.my"

---

QUOTE(rosdi.ahmad @ Sep 2 2010, 12:45 AM)
hi,

can i setup another wireless point upstair as the existing wireless router (comes with package) is not strong enough for the signal. very weak signal eventhough on the same floor.

i have the previous Planet WRT-414 wireless router that i use with streamyx last time.

any chance? thanks.
*
Yes you can, just pull a cat5 from the DIR-615 to the LAN port on that Planet router and make sure its DHCP server is off and its IP address does not conflict with the IP of the DIR-615.

QUOTE(nokia2003 @ Sep 2 2010, 02:34 AM)
can I reconfirm that, we must use telekom's wireless router in order to subscribe to unifi?

my house's design is weird in a way that only linksys can project the signal to my room.

I have tried d-link, netgear and belkin and they definitely can't offer me linksys' coverage and range.

thanks guys.
*
Same answer as above, pull a LAN cable to the linksys and use it as a wifi AP. The DIR-615 has terribad wifi so I doubt it's going to be an upgrade for you.

Alternatively, you can also set up your DIR-615 in bridge mode and use your existing routers to dial up and manage the PPPoE connection.

This post has been edited by rizvanrp: Sep 2 2010, 03:31 PM
billytong
post Sep 2 2010, 03:43 PM

Lord Sauron
*******
Senior Member
4,522 posts

Joined: Jan 2003
From: Mordor, Middle Earth.


Hey Riz, would it be possible to use the remaining 2 LAN ports as normal switch LAN port? After making the port 3 Bridge, keeping port 4 for IPTV?

It seems the 2 LAN port become useless after I follow Rizvan's guide bridging 615's LAN3 for custom router. Is to possible to set WAN connection 4 to tag 500(basically factory setting of WAN connection 1) for internet connection while keeping the Internet on LAN port <-> custom router alive? Not sure if we can do pppoe on the custom router then and 615 at the same time. Or is there another way?

This post has been edited by billytong: Sep 2 2010, 03:44 PM
rizvanrp
post Sep 2 2010, 03:48 PM

Getting Started
Group Icon
Elite
195 posts

Joined: Sep 2006



QUOTE(billytong @ Sep 2 2010, 03:43 PM)
Hey Riz, would it be possible to use the remaining 2 LAN ports as normal switch LAN port? After making the port 3 Bridge, keeping port 4 for IPTV?

It seems the 2 LAN port become useless after I follow Rizvan's guide bridging 615's LAN3 for custom router. Is to possible to set WAN connection 4 to tag 500(basically factory setting of WAN connection 1) for internet connection while keeping the Internet on LAN port <-> custom router alive? Not sure if we can do pppoe on the custom router then and 615 at the same time. Or is there another way?
*
I don't understand what you mean, what are you trying to achieve? Why would you want PPPoE on your own router and also on the DIR-615?

I also never used WAN connection 4, I just modified 1 and 3 and applied 3 to a physical port. I believe I changed the VLAN ID of WAN connection 1 (the default PPPoE profile) to 700 to prevent some kind of conflict but I can't remember what that was.

This post has been edited by rizvanrp: Sep 2 2010, 03:50 PM
billytong
post Sep 2 2010, 03:53 PM

Lord Sauron
*******
Senior Member
4,522 posts

Joined: Jan 2003
From: Mordor, Middle Earth.


QUOTE(rizvanrp @ Sep 2 2010, 03:48 PM)
I don't understand what you mean, what are you trying to achieve? Why would you want PPPoE on your own router and also on the DIR-615?

I also never used WAN connection 4, I just modified 1 and 3 and applied 3 to a physical port. I believe I changed the VLAN ID of WAN connection 1 (the default PPPoE profile) to 700 to prevent some kind of conflict but I can't remember what that was.
*

thats right. I wanted to use my custom router for Internet connections as well as the 2 remaining ports the 615 unit have. Is it possible to do it?

Something like this.

BTU<--->615<--LAN3--> Router<---->Desktop

615<---LAN1/2--->Desktop

This post has been edited by billytong: Sep 2 2010, 03:55 PM
rizvanrp
post Sep 2 2010, 04:01 PM

Getting Started
Group Icon
Elite
195 posts

Joined: Sep 2006



QUOTE(billytong @ Sep 2 2010, 03:53 PM)
thats right. I wanted to use my custom router for Internet connections as well as the 2 remaining ports the 615 unit have. Is it possible to do it?

Something like this.

BTU<--->615<--LAN3--> Router<---->Desktop

615<---LAN1/2--->Desktop
*
There's not enough ports and its not possible since the DIR-615 is wired into the WAN port of your router (which automatically blocks off all rfc1918 traffic).
auronthas
post Sep 2 2010, 04:04 PM

AudiOphiL3
******
Senior Member
1,346 posts

Joined: Sep 2007
Just had my UNIFI installed, the speedtest is as follow:-

user posted image

I have problem with my Aztech Homeplug 109EP connecting STB, there is no powerline activity (even I press and hold 2 sec for both homeplugs, wait for 2 minutes, result still the same), there's only two out of three lights lid, please advise me, homeplug sifus.

Thanks in advance
billytong
post Sep 2 2010, 04:05 PM

Lord Sauron
*******
Senior Member
4,522 posts

Joined: Jan 2003
From: Mordor, Middle Earth.


QUOTE(rizvanrp @ Sep 2 2010, 04:01 PM)
There's not enough ports and its not possible since the DIR-615 is wired into the WAN port of your router (which automatically blocks off all rfc1918 traffic).
*

Oh jeeez. doh.gif

I got my IP CCTV DVR beside my 615, and my own router on another floor. sweat.gif


Added on September 2, 2010, 4:12 pm
QUOTE(auronthas @ Sep 2 2010, 04:04 PM)
Just had my UNIFI installed, the speedtest is as follow:-

user posted image

I have problem with my Aztech Homeplug 109EP connecting STB, there is no powerline activity (even I press and hold 2 sec for both homeplugs, wait for 2 minutes, result still the same), there's only two out of three lights lid, please advise me, homeplug sifus.

Thanks in advance
*

At first not sure which LED is not on, iam using 110E here, it is only 2 LED if u dot not plug ur LAN cable. Do you? tongue.gif the 3rd LED is Ethernet LED. May be swap another LAN cable to test it out

if u follow the advise in the manual, initially it ask you to put 2 homeplugs that u want to paired up side by side, then press the button for 10sec for one of them.

If the center LED then the network ID might be diff. You might want to repress the button again and go back to process again.

This post has been edited by billytong: Sep 2 2010, 04:12 PM
rizvanrp
post Sep 2 2010, 04:13 PM

Getting Started
Group Icon
Elite
195 posts

Joined: Sep 2006



QUOTE(billytong @ Sep 2 2010, 04:05 PM)
Oh jeeez. doh.gif

I got my IP CCTV DVR beside my 615, and my own router on another floor. sweat.gif
*
You have a LAN cable between the floors?
billytong
post Sep 2 2010, 04:14 PM

Lord Sauron
*******
Senior Member
4,522 posts

Joined: Jan 2003
From: Mordor, Middle Earth.


QUOTE(rizvanrp @ Sep 2 2010, 04:13 PM)
You have a LAN cable between the floors?
*

unfortunately no sweat.gif , looks like I need another homeplug :3

D3vilsim
post Sep 2 2010, 04:17 PM

Regular
******
Senior Member
1,260 posts

Joined: Jan 2005
From: Damansara Perdana / Alor Setar



QUOTE(billytong @ Sep 2 2010, 04:14 PM)
unfortunately no  sweat.gif , looks like I need another homeplug :3
*
Get the 110EW with N-wifi. the wifi work good in a small area like bed room. smile.gif
sohlican
post Sep 2 2010, 04:22 PM

Casual
***
Junior Member
340 posts

Joined: Jan 2003
From: Malaysia


QUOTE(rizvanrp @ Sep 2 2010, 03:23 PM)
Hey sohlican, I don't have a ZTE BTU but I pulled these settings from the running-config of my Fiberhome through the console interface. Hopefully it has what you're looking for smile.gif

CODE
!sip protocol config---------------------
set authname-postfix @ims.tm.com.my
set escape [enable|disable]
set sip timer T1 500 T2 4000 T4 5000
set special ring temp 1 400,200,400,2000
set special ring temp 2 400,200,400,2000
set special ring temp 3 400,200,400,2000
set special ring temp 4 400,200,400,2000
set special ring temp 5 400,200,400,2000
set special ring temp 6 400,200,400,2000
set special ring temp 7 400,200,400,2000
set special ring temp 8 400,200,400,2000
set special ring temp 9 400,200,400,2000
set special ring temp 10 400,200,400,2000
attach port 16 to special_ring_temp 1
set reg enable
set registrar ims.tm.com.my transport udp port 5060
set proxy 10.225.0.1 transport udp port 5060
set expire-time 3600
set port 0 pole 2
set port 1 phone-number +603770rizzy
set port 1 need-proxy enable
set port 1 caller-id mdmf
set port 1 auth-name +603770rizzy password rizzy's_pass
set port 1 call-waiting disable
set port 1 call-conference disable
set port 1 forward-num +603770rizzy
set port 1 pole 2
set port 2 need-proxy enable
set port 2 caller-id mdmf
set port 2 call-waiting disable
set port 2 call-conference disable
create profile port1
set profile port1 silence_mode compress
set profile port1 soft_noise enable
set profile port1 second_dial normal
set profile port1 echo_cancel disable
set profile port1 gain 0
set profile port1 input 0
set profile port1 jitter_Buffer 40
create profile port2
set profile port2 silence_mode compress
set profile port2 soft_noise enable
set profile port2 second_dial normal
set profile port2 echo_cancel enable
set profile port2 gain 0
set profile port2 input 0
set profile port2 jitter_Buffer 40
attach profile port1 to user 1
attach profile port2 to user 2
set local port 5060
set DnsServer 0 0.0.0.0
set conference mode 0
set attented transfer code *12*
set unattent transfer code *12*
set dialplan notify unambiguous
set keepalive used disable
set caller-id modify-time off


Full authname format should be like "+60377000000@ims.tm.com.my"
Thanks a lot! Just set it up and it's working now! LOL... Those setttings in my ZTE all are messed up by the technician. LOL... Thanks a lot man, it is working dy smile.gif

alextong8386
post Sep 2 2010, 04:27 PM

New Member
*
Newbie
0 posts

Joined: Mar 2010


My cannot use my existing RJ11 internal wiring (from ground floor)even though I connect a RJ11 telephone cable from TEL1 at BTU to wall plug (from 1st floor).

jaylike7
post Sep 2 2010, 04:28 PM

Gears Of War addicts!
*******
Senior Member
2,164 posts

Joined: Jan 2003
From: I'm from Locust
Hi Guys,

i've followed the guide provided in this link

http://unifi.athena.my/index.php?option=co...id=49&Itemid=61

but still no go. my setup is like

huawei modem -> dlink DIR-615 (Bridge mode) -> Aztech Router WL830RT4 -> PC/Laptop

i follow the link above and set the same setting in Dlink DIR-615 and able to dial up from my pc, but it doesn't dial if i using the Aztech router to dial. i confirmed Aztech router settings are correct and when i checked the log from Aztech router and it keep showing message

Sending PADI...
Sending PADI...
Sending PADI...
Request timed out.

oh ya, i notice my LAN icon from taskbar showing limited connectivity if i plug the DIR-615 directly to my PC after i set the DIR-615 to bridge mode. Is this correct?

anyway, if above solution not possible..will it be possible if i upgrade to DD-WRT firmware and set as bridge mode again to use above setup? if possible how should i do it?

i found this tutorial site but i do not know which is the correct tutorial to configure bridge mode for DD-WRT firmware. rclxub.gif rclxub.gif

http://www.dd-wrt.com/wiki/index.php/Tutorials

any kind soul can help me out here? cry.gif
auronthas
post Sep 2 2010, 04:28 PM

AudiOphiL3
******
Senior Member
1,346 posts

Joined: Sep 2007
QUOTE(billytong @ Sep 2 2010, 04:05 PM)


Added on September 2, 2010, 4:12 pmAt first not sure which LED is not on, iam using 110E here, it is only 2 LED if u dot not plug ur LAN cable. Do you?  tongue.gif the 3rd LED is Ethernet LED. May be swap another LAN cable to test it out

if u follow the advise in the manual, initially it ask you to put 2 homeplugs that u want to paired up side by side, then press the button for 10sec for one of them.

If the center LED then the network ID might be diff. You might want to repress the button again and go back to process again.
*
Mine is Powerline Activity is not on, power and ethernet led is on. If I do not plug LAN cable, there is only one power led on.

I did not paired side by side. Do I need to have LAN cable connected to modem/STB for pairing? Thanks for replying
rizvanrp
post Sep 2 2010, 04:35 PM

Getting Started
Group Icon
Elite
195 posts

Joined: Sep 2006



QUOTE(jaylike7 @ Sep 2 2010, 04:28 PM)
Hi Guys,

i've followed the guide provided in this link

http://unifi.athena.my/index.php?option=co...id=49&Itemid=61

but still no go. my setup is like

huawei modem -> dlink DIR-615 (Bridge mode) -> Aztech Router WL830RT4 -> PC/Laptop

i follow the link above and set the same setting in Dlink DIR-615 and able to dial up from my pc, but it doesn't dial if i using the Aztech router to dial. i confirmed Aztech router settings are correct and when i checked the log from Aztech router and it keep showing message

Sending PADI...
Sending PADI...
Sending PADI...
Request timed out.

oh ya, i notice my LAN icon from taskbar showing limited connectivity if i plug the DIR-615 directly to my PC after i set the DIR-615 to bridge mode. Is this correct?

anyway, if above solution not possible..will it be possible if i upgrade to DD-WRT firmware and set as bridge mode again to use above setup? if possible how should i do it?

i found this tutorial site but i do not know which is the correct tutorial to configure bridge mode for DD-WRT firmware. rclxub.gif rclxub.gif

http://www.dd-wrt.com/wiki/index.php/Tutorials

any kind soul can help me out here?  cry.gif
*
Check your DIR-615 settings and make sure you did everything correctly (including using the exact LAN ports which I've specified).. if your router is sending a PADI with no PADO reply, your bridge is not configured properly.

Its hard to say it will 100% work if your PC can dial in because Windows automatically strips VLAN tags off tagged frames. Your DIR-615 could be accepting untagged traffic but sending out tagged traffic and it would still be able to dial in.

This post has been edited by rizvanrp: Sep 2 2010, 04:37 PM
billytong
post Sep 2 2010, 04:40 PM

Lord Sauron
*******
Senior Member
4,522 posts

Joined: Jan 2003
From: Mordor, Middle Earth.


QUOTE(auronthas @ Sep 2 2010, 04:28 PM)
Mine is Powerline Activity is not on, power and ethernet led is on.  If I do not plug LAN cable, there is only one power led on.

I did not paired side by side. Do I need to have LAN cable connected to modem/STB for pairing? Thanks for replying
*

Try putting them side by side, if not reset back to factory setting. You probably mess up the powerline security settings.
jaylike7
post Sep 2 2010, 04:43 PM

Gears Of War addicts!
*******
Senior Member
2,164 posts

Joined: Jan 2003
From: I'm from Locust
Hi riz,

thanks for your swift reply, i have checked and rechecked also reset and reconfigure again before i posted it up.

anyway, i will try again tonight, reset it and reconfigure again. maybe i should try using the easy method.

will keep you posted...


auronthas
post Sep 2 2010, 04:48 PM

AudiOphiL3
******
Senior Member
1,346 posts

Joined: Sep 2007
QUOTE(billytong @ Sep 2 2010, 04:40 PM)
Try putting them side by side, if not reset back to factory setting. You probably mess up the powerline security settings.
*
No, I didn't change any security setting, when I put them side by side (without ethernet cable), the powerline activity is lid, but when I connected the homeplug t DIR-615 (1st floor) and pairing with the other homeplug (ground floor) to STB, no more green light from powerline activity ,

121 Pages « < 86 87 88 89 90 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0549sec    0.72    7 queries    GZIP Disabled
Time is now: 10th December 2025 - 07:02 AM