Riv,

I noticed a problem though regarding wireless. I changed the network key as well as the pin, and save/reboot router. After that the wireless did not work as before.

I'm using the dir-615 for my main router for now until my ESR-9850 arrive ._.;

Before i try to change the default network key again, any tips ???

I'm also having issues trying to setup wireless to my other desktop.


Fiberhome > DIR-615 > PC A desktop


DIR-655 > PC B desktop


PC C laptop



So far wireless to the laptop works since it has its own internal wireless thingy in the motherboard.


As for pc b however, it's connected by ethernet to the DIR-655 and set to wireless N. How do i get that to connect to the DIR-615 using wireless :/ ?

rizvanrp

We should start paying for unifi this month or next month?
Can i terminate my streamyx service now? How to terminate, do i call unifi line or streamyx..?

@mewgle

Check the wireless settings on the PC.. make sure its not attempting to use the same key or something after you've changed it on the router. Never had this issue before. Try changing the wifi network SSID too after you change the key perhaps?

Uh, whats the dir-655 plugged into besides PC B? If it's not plugged into anything and you want it to connect to the DIR-615 wifi network, it has to have dd-wrt + set on wifi client mode + placed on a different subnet than 192.168.0.0/24. Complicated setup brah.. just get a wifi adapter for PC B or something.

@andydemarco

I think its after 30th July? You can only cancel your streamyx then.. they won't let you terminate it now cause you'll be getting free internet access..

Oh so need dd-wrt to do that, i see.

Is the feature to do that called AP repeater ???

Yes if i can't figure this out, i may just get a wifi N usb stick instead (simplicity).

Not repeater mode, client mode

guys,

what the dns ip for google?
change it in the wireless router rite using the operator login rite?

thx..

No matter when they let you terminate it, you should go down to your nearest Tm point and fill in the termination of services form (for streamyx and/or home-line). I dont think they will let you terminate it over the phone.

---

Added on June 16, 2010, 4:06 pmGoogle Public DNS IP addresses

The Google Public DNS IP addresses are as follows:

* 8.8.8.8
* 8.8.4.4



http://code.google.com/speed/public-dns/do...ng.html#testing

This post has been edited by Lucas: Jun 16 2010, 04:06 PM

thank you lucas, will try it tonite..

for those seri petaling users, here's the bad news....
there is no 4mbps port/TM fixed line port since from march until now and still counting..
and now...
this...

Thank you for your interest in TM's new UniFi products. Your home will be served by Sungai Besi Exchange. We are sorry to inform the current information as to future availability in Seri Petaling area, indicates service should be available in OCTOBER 2011. I’m sorry we can give no exact date for your house.
Please if you have not already done so, take the time to enter your details expressing your interest at our UniFi website,
http://www.tm.com.my/connecting-you/digita...BBInterest.aspx

Uh.... is fax supported by Unifi ??? I'm expecting some important faxes to come through but uh, how to set up fax maxhine for Unifi :/ ?

if i'm not mistaken, fax is not supported by Unifi.. (not sure i heard it from V4 or V3..)

fax is supposed to be analog based..so how would it work on unifi??

just checked with TM, unifi is coming in february 2011.....

Fax can be run on top of SIP if it is enable...

Unifi billing starts next month (excluding VOIP, which has already started).

You can terminate your streamyx now IF your contract with them is over. When I wanted to terminate mine at TMPOINT DU, the staff gave the usual "oh actually you cannot terminate now, only after june". When I told her my contract with streamyx is over, she went to check with her colleague or whoever it was before telling me that I can terminate my streamyx.

Like someone said previously you can only do it by filling up a termination form at tmpoint.
HOWEVER, a close friend of mine managed to terminate his streamyx via the phone. What makes it stranger is the fact that he did it by calling Unifi's hotline; something that I tried to do without success. The CS's name, IIRC is Haslina. I've spoken to her previously and she was pretty efficient. Couldn't get her on the line again though.

Not sure if it was a special case or what.. this was back in May.

My torrent peaked at 700 kb/sec ish :[ sigh



Uploaded with ImageShack.us


The router holding it back :{

Try downloading Windows 7 directly from Microsoft and see if you can get full speed.
I always get mostly full speed from their servers. I've posted the video before.

Ok i will give it a try.

But i did also check using unifi's own speedometer but my supposed 10mb is no where near there :[

I'll try arrange a 20mb upgrade soon and see if that fixes it

Any special settings on your utorrent?

Just subscribe VIP5 through the phone, quite efficient I must say, installation was scheduled on this Friday.

utorrent 2.0.3 beta


Port forwarding : custom port 655xx

Maximum upload: 398 kbps (should always be 80% of your total upload, however my speed is unstable :/ i get my upload speed figure from speedtest.net then get 80% from that )

Global maximum number of connections: 200 (this could be a wrong setting since i've upgraded to 10mb :/ and also i need to change router which support better max simultaneous connections)

Maximum number of connected peers per torrent: 150 (this could be a wrong setting since i've upgraded to 10mb :/ and also i need to change router which support better max simultaneous connections)

Number of uploads per torrent: (this could be a wrong setting since i've upgraded to 10mb :/ and also i need to change router which support better max simultaneous connections)




enable dht network

enable dht for new torrents

enable local peer discovery

enable bandwidth management

enable udp tracker support

ask tracker for scrape information

enable peer exchange

Protocol encryption outgoing: disabled

allow incoming legacy connections

queuing (max active torrents, max number of active downloads 3 each)

bt.transp_disposition: 255

net.max_halfopen: 80

peer.lazy_bitfield: true




I don't think my torrent settings are perfectly configured Not bothered to try tweaking until my ESR-9850 has arrived.