@ah_khoo
pls bro..joking.. pls take no offence
kekeke
ganah ram..what chip?

@selferino
great..kekeke..inilah asam garam OC.. if want prime stable at high voltage, u shud done it 1st week after buying..kekke
got burnmark?if no go RMA..and get urself a new premium mobo leh..keke

yes, succesfully burn my mobo(i think coz suddenly shut down during priming), haih tangan gatal sgt nk stablekn 4Ghz on my proc till kt bios Vcore set 1.55v ( thou everest n Hwmonitor shows 1.6v), tested my ram, gc at my fren comp still working, tried his psu at my comp, same case not booting( yes already did clear CMOS), now not sure yet whether my proc, my mobo, and my psu is still ok. Mobo confirm dh out dh, tp proc ngan psu xtau lagi, xde tempat nk test, haih....dh stable 3.9Ghz gatal nk kejar 4Ghz, haih....::

@ah_khoo
pls bro..joking.. pls take no offence
kekeke
ganah ram..what chip?

@selferino
great..kekeke..inilah asam garam OC.. if want prime stable at high voltage, u shud done it 1st week after buying..kekke
got burnmark?if no go RMA..and get urself a new premium mobo leh..keke

wow... windsy... nice chip w/ 2MB L2 cache there sis... 

this is almost d max i can afford w/ my limited skill, d ram could go further under d hands of sis xixo... 
very late submission for brisby g1, ts dun get angry yerr... 

AMD Athlon X2 4400+ G1 | 2800MHz | ah_khoo | TA690G | OEM Crucial Value DDR2 667 | 933MHz | 4-4-4-12-16 | AMD stock cooler (w/ heatpipies)

burnmark on the mobo ke? how 2 see eh? do u think sumhow my proc still ok( no am3 board lying around to test, my fren using i5) ?

try looking at the back of the mobo..
proc quite hard to be killed.. unless u patahkan satu kaki like our dearest TS    (atleast here la..but at Intel tered.. there are few..or several..since they rich ppl    )

@ah_khoo..
no wonder..
escape from the comfort Vcore then.. i belip 3.0ghz doable in 1.4vcore... must be better with ur hands ofkos..

fuh, so i can safely say my proc n psu is ok la kan? the burn marks got pic example?

nah..i say it might not be killed..but who know   


urs might not be like this.. a small black marking on the back where the place the kaki is soldered is consider burnmark too (am i right? sifuu?)
if got.. it will be useless to send to RMA..since they very strict at checking for markings

kalau xpercaya..tanya cloudwan..kekeke

Erkkkkk my old mobo got no burnmark, only sticky2 mark
Beside i didn't RMA bcoz of oc'ing accident only lightning

@selfrino
Check the top of ur pwm's & ferrite core see if any crack or burn marks.. if there is then u have to buy a new mobo
And like kunta said when RMA shops/distri are really particular, don't give them any chance/way to reject ur RMA sooo clean up a bit if u can

Erkkkkk my old mobo got no burnmark, only sticky2 mark
Beside i didn't RMA bcoz of oc'ing accident only lightning

Yup maybe just need 2 update bios and ur set.. Tho are u going to oc kaw kaw later on?
If yes then i'm kinda worried with the 770-C45 pwm's longevity

No oc just stock use. But even with that I doubt the ability of the pwm and mobo.