8 series if possible, for rams i'll jz go for normal ddr3 only...

Fancy for Biostar? I saw their 8 series at less than Rm400

u sure? coz last i check n google they have it ( C1e its like based on mobo or sumtin) n newer AMD proc like Athlon II n Phenom III has C1E support, but thn again im not sure..

omg, d board rly look cheapo imo on 2nd thought fr d 890FX quite good

oc wise, is it good?

another thing for GX n FX, is there rly major diff when it comes to OC?

for now i only jz add up d multi

This post has been edited by Sib: Jun 19 2010, 07:32 PM

About the C1E support, I'm not sure cause I didn't touch that at my system also. Only disable the C&Q.


Cheapo but it's for the budgeted user that wanted to jump to 8 series

OC wise have to ask sifu already. I didn't touch Biostar after my incident with the brand

Difference but not much. The only thing I know GX is CFire and FX is tri-CFire. I think

This post has been edited by XiuKeong: Jun 19 2010, 07:32 PM

IINM GX is using onboard IGP while FX dosent have it!

FX have more PCi-E on it! and if you wanna do quad xfire, better go with FX!

This post has been edited by verdict: Jun 19 2010, 07:45 PM

i may jz go for 2 cards d max,lol

so GX n FX's diff is only at d total of pcie lanes, no?

mbe i'll jz go for 890GX tis time

y dont 870..some got 2x PCIEs also..cheaper... kekekeke..
do remember on FX..2cards CF will get 16x..but on GX only 8x

@cloudwan..
happy birthday bro.. may ur wish be granted...1090T right?kekekek

@verdict..
with that avatar again..annoyed..kekekek

FX when CF can go for 16x/16x speed while on the GX only 8x/8x speed..

---

Added on June 19, 2010, 8:34 pmThanx bro, i'm soo old already

This post has been edited by cloudwan: Jun 19 2010, 08:34 PM

on 2nd thought mbe i won't do cf, even wif my current 5870 feels enuff liao

furthermore, still not at its full potential atm

my only focus is to get a stable 3.8GHz on my 955 here

btw, bro cloudwan!

This post has been edited by Sib: Jun 19 2010, 08:37 PM

Ho Ho Ho! im a bad boy once again~

If ur not going to CF maybe a Gigabyte 870A-UD3 or Ahsus M4A88TD-V EVO/USB3 would suit u?
They are only around RM400 Should be able to take ur 955 to 3.8ghz no prob

BTW thanx 4 the wishes guys.. I just love the AMD OC Family

aite, i guess i'll take up d bday man's suggestions

thx!

kite tunggu & lihat aje bro...

that's d way bro, spread d ahsos love...

joke aide, i'm ok w/ either one, 870 for non cf while 880 for low end cf... ahso 880 mite be picky w/ ram, but throw a pair decent ram on it, u'll see 'em fly... ofcoz dun compare it w/ d eldest brother in cf4 which is d best ram tweakin board to date...

ohana means family, family means no one left behind... guess whose line is this? :

btw, sis verdict can give me tutorial for brisby + ta690g ah? i'm havin hard time taming d chip and/or ram...

This post has been edited by ah_khoo: Jun 19 2010, 10:38 PM

wuts the best formula for cpu-nb frequency when ocing the cpu frequency(965 BE), and also the voltage formula for the current clock of cpu-nb frquency (AM3 + DDR3 platform)?

---

Added on June 19, 2010, 11:33 pmcurrently using cpu-nb freq = (cpu freeq*2) / 3.15

This post has been edited by selferino: Jun 19 2010, 11:33 PM

i donno how reliable this table..since this table been in my PC for long time..so i cant remember the sos and the reliability..kekeke
but it does make sense to me..

the best n fastest way to test the OC is stable thru prime95 and to check whether its satble wif the cpu-nb is thru fft length of 512k right?

This post has been edited by selferino: Jun 19 2010, 11:45 PM

normally you isolate by just tweaking 1 thing at a time

just blend at 1min interval

im not so sure..iirc..last time sifu antonio recommend some low value. (<600 perhaps)
anyway..just blend.. or u can try in place large FFT ( i hope i had the name correct)..

what i know..
small = cache
large = ram
IMC donno..kekekek..

do i need to play around wif the HTT link speed and voltage? coz never saw anytin bout tat in the phenom II guides..