Hi all waja owner there,does anyone here face the same problem with me after change to metal window assembly?

after changed to metal one...i found out many sound come out la even at low rpm to high rpm and all the time i driving my car..can hear some metal hit metal sound...any way to solve this problem?

weee just came back from polishing my waja.polish+3 layer wax+engine cleaning+internal cleaning+windshield treatment,RM558.very satisfied,the shop at Jusco AU2 undeground parking lot.

so now almost everything's done, left is to find a new set of 15" sport rims to pair up with my PP2.

do u think it can be alignment even we did not change the screw chamber.. i have no choice cause my front old tyres worn out from inside.. they told me it cant be alignment to correct position unless i change the screw..

Then better go to other shop. Alignment doesn't need to adjust camber. It just to make sure the tyre are pointing straight.

Hi all waja owner there,does anyone here face the same problem with me after change to metal window assembly?

after changed to metal one...i found out many sound come out la even at low rpm to high rpm and all the time i driving my car..can hear some metal hit metal sound...any way to solve this problem?

And

How to remove original waja rear speaker?

I bet most of them face this problem as myself facing this problem aswell.

Solution ? Changed all of it to metal window frame/motor and do sound proof/deadening.

Anyone know where I can send my TB for cleaning ? Although everyone saying that it's quite easy but still no experience yet. Please help.

This post has been edited by Andy0625: Oct 15 2009, 10:13 PM

thanks 4 ur info.. i think i just kne kelentong coz they just lazy to adjust and promote the expensive screw for their product..

LoL...I am going to bring my car for aligment tomorrow... Coz my car alignment gone already... ErM...Balancing too... HaHa...Will update the result after balancing and alignment... Between, what sound does wheel bearing make when it is broken or used up? I heard some sound from front driver side tyre...But not sure what sound...

it depends on... check the coverage.
comprehensive insurance coverage is more expensive(easily over 1k) compare to 3rd party ones...

My brother was following me home yesterday.

He is driving his Peugeot 308. I am in my 03' 4G18 Auto Waja. both fully stock.

Acceleration from standstill-80kmh he was right behind - but after 100kmh I started pulling away slightly but he caught up again.. performance wise I think the 308 will win hands down as he was not driving as hard.

But when it came to highspeed corner, the 308 being a heavier car and softer suspension has lots of problem keeping up, especially if there are irregularity on the road. Slow tight corners, there are no difference.

All in all, I can confidently say that the Waja has the best handling in its price range:) (note i didnt say category or segment! though Im sure it would be one of the better handling cars in its segment too)

just my sharing:)

im totally agree wif u..
i cannot accept ppl talk bad about waja...ppl tht never own 1..but talk like they use it b4...

Yea, the car has its share of problems but with proper maintenance and care its pretty decent actually.

small issues are annoying but can be fixed.

hi guys,i want to know how to see waja engine oil dipstick accurately a?

every time i filled in new engine oil,is hard for me to see the engine oil dipstick level...and the colour of engine oil is too light..any others way to see it accurately?

issue???where got issues maa hahahaha...

too light mean urs new oil....normal...still can c it....best to check during morning time...let the engine cool n the oil rest to bottom

my question???

do u replacing it by urself or shop?...

if u know how to install by urself than u need to check the movement part especialy window area...

oh the other thing i forgot but im sure many facing this after replacing ori to metal type..
there are small column that use at door opening mechanicsm..
u cant hear this during old type because the old one cover it... and the sound too deem but
due metal type got a lot of expose area,, u can hear it clearly...

its not easy to solve it but what i do (succeded), uninstall all window mechanism than u can check door opening
mechanism... try move that collumn by ur hand and u will see that collum can move freely.. even can hit ur car door body.. thats the sound come from.. then find any tape to cover that metal/collumn then u go.... its still hit the wall but due u use tape, the tape will absorb the pressure n noise produce so low...

hope u understand what i try to explain here... if got pic i can show but i just repair my power window due window holder bend and no pic taken.. sorry guys..



p/s : it takes me a couple of month to notice the source of problem...

---

Added on October 16, 2009, 5:24 pmsharpen ur eyes.. n u'll see



This post has been edited by wch5274: Oct 16 2009, 05:24 PM

[quote=wch5274,Oct 16 2009, 05:20 PM]
my question???

do u replacing it by urself or shop?...

I still using stock rear speaker and decide to remove it..but i cant see the screw..maybe somewhere inside..that's why i can't remove it..

if u know how to install by urself than u need to check the movement part especialy window area...

oh the other thing i forgot but im sure many facing this after replacing ori to metal type..
there are small column that use at door opening mechanicsm..
u cant hear this during old type because the old one cover it... and the sound too deem but
due metal type got a lot of expose area,, u can hear it clearly...

its not easy to solve it but what i do (succeded), uninstall all window mechanism than u can check door opening
mechanism... try move that collumn by ur hand and u will see that collum can move freely.. even can hit ur car door body.. thats the sound come from.. then find any tape to cover that metal/collumn then u go.... its still hit the wall but due u use tape, the tape will absorb the pressure n noise produce so low...

hope u understand what i try to explain here... if got pic i can show but i just repair my power window due window holder bend and no pic taken.. sorry guys..



p/s : it takes me a couple of month to notice the source of problem...

Erm bro can you try to take a pictures for me?i don't really understand...too noob maybe!hehe...thanks alot...and try google the photos regarding that column/metal thingy and show me can?

I just install the metal type power window by myself yesterday. And it doesn't make any weird noise as all you said... ErM...Maybe I am not sensitive enough... HaHa...

wow pro installer spotted..haha

i also don't know eh..but i can heard is the sound come from the door there..so i suspect is the metal window assembly thingy..don't know how to fix it also..any acc shop can do this?lol...don't mind paying them few bucks..

there is a 'bassy' sound from the underneath front when my car turning slowly and the steering turn is almost full(never turn it full, btw bad practise . )
could it be the drive shaft / bush problem?

believe it or not...for my personal experience...win a bmw 3 series 1998 and a 8th gen civic 2.0 both own by my friend...we start at a busy road that need overtaking an mostly between range at 80-100km/h when in around corner just pull down to 2nd gear break harsh and turn...guess what...im the first...mostly due to the driver skill hehe...not promoting racing here drive safe....

i didnt drive my waja for 3months....so miss my car cause im curently in oz...will tuned kao kao when i come back on dec...hehe