Lol ...no money yet... taking driving lesen edi... Maybe next month..

Previous...


ady upgrade today... seem better abit...

Hi sifu2 how to overclock Ram?
now im stuck in Ram frequency i think.
mine Kingston DDR2 667 2 X 1G Hynix FP-Y5 chip.
can't increase my ram freq over 750mhz
timing is 5-5-5-15

This post has been edited by PGV3910: Apr 15 2008, 08:09 AM

That could be the limit of your rams, unless you increase the vdimm.

What's your vdimm at the moment?

1.90v...
try increase to 2.2v..but still the same..
now i put Vcore more..
1.60v..walao! insane edy


Temp on idle


18.718s|PGV3910|E2160 Conroe 1M L2 Stepping with Silverstone NTO2|3.46Ghz|Abit AW9D-MAX|Kingston DDR2 667 2X1GB|750Mhz|5-5-5-15|
My L2 stepping is better than my friend MO stepping(new batch) i think

maybe my Ram not good enough..wanna borrow my friend DDR2 800..
fried it like hell

This post has been edited by PGV3910: Apr 15 2008, 11:36 AM

Wanna get higher? OC your proc.

burn more ur E2200 la bro
u can get higher marks in ur 3d bench

Wah....cant even get ddr800??

Got a saying here, if your ddr667 cant do ddr800, better break it in half n throw away

Then it's probably not your rams.... did you try lowering your CPU overclock and just overclocking the rams? Could be your northbridge too....

thats make like this now----
my previous AB9 Pro mobo can clock my Ram to 834mzh..
my be sumthin wrong wif my AW9D-Max
can throw it ..now ram cheap edy

This post has been edited by PGV3910: Apr 15 2008, 12:15 PM

edy try it..can't pass 750mzh..
i use my psb strap 1333
if i use 1066..sure kantoi..
need to learn more from all sifu
btw.i edy update my AW9D Max bios to Bios17
but nothing special la i think.
previously my bios is bios15,is it ok i skip bios 16 and flash it straight away to bios 17?
north bridge?u mean mch volt?i totally no idea on that vmch.
now this my bios setting
Vcore 1.6 volt---suddenly my insaneness's become higher,i put my vcore to 1.7v!..hahahha..my mobo can't boot..POST error 9.0!suicide
Vdimm 1.9 volt---edy increase to 2.1,2.2 & 2.3v..no help
vmch 1.55-----this one i no idea lor..noob
but i check my NB HSink not hot lor..edy attach it wif high performance fan and feel it wif my finger..no hot at all
the highest can get 3.45G stable to run 3d mark06 wif 11670K(forgot to print screenies ) wif my stock clock 8800gt
btw.this my 3dmark06 previous result.
database detect my e2160 as E4300

but i suspect sumthin wrong wif my ram slot

my freq not detected in CPU-Z

This post has been edited by PGV3910: Apr 15 2008, 12:41 PM

Vmch is about 1.3-1.4v default depending on your mobo.

How high can your FSB go with that setting? Try overclocking your FSB only (meaning lower multipler for CPU and rams...)

in my bios got mch + Pcie volt and default is 1.5 volt.
aiyak..i need to do more research for my mobo liao
seems like i need to push my mch+Pcie voltage to 1.7V! (according to pcmoding reviews)
dun want to do that..mobo dun have warranty edy lor

This post has been edited by PGV3910: Apr 15 2008, 01:14 PM

Can i ask how much vcore u needed to reach 3.2Ghz?Thanks

Let me share .. 1.378v full load on CPU-z reading..

@PGV3910
if u r on gigabyte board yes u can do that like Amedion said...most likely at 3.2GHz@1.376v...if u r on other brand mobo...i think u need more...unless u have a gem chip..

This post has been edited by flatfinger: Apr 15 2008, 03:12 PM

Most average E2160 can do 333*9 or slightly lower with stock vcore.

back to oc..just bought dfi blood iron at robyn

1.378V like amedion one
but didn't try on orthos.
but can run 3dmark without BSOD or restart

This post has been edited by PGV3910: Apr 15 2008, 06:33 PM

indeed... i had mine on 3.0GHz @333x9 with 1:1 with tight timing

anyway...
my E2140 passed 2hrs priming test (my personal preference...) @1.475V , yeah that high... but i guess it's ok because the temp pretty low under load... @ ±60°C on ThermalRight HR-01 + AS5 Thermal Paste