this is continuity from v1

Intel Pentium Dual Core family :-

Intel Pentium Dual Core Official Site

Intel Celeron E1X00 :-

Intel Celeron Official Site

CPUz Screenshot of mine


CPU Info
CPUz 1.44.2 - Download | Homepage

Stress Test Program
Prime95 25.6 (January 29, 2008) - Download | Homepage
OCCT 2.0.0a (March 16, 2008) - Download | Homepage
SP2004 Orthos Edition - Download | Homepage
HyperPI 0.99b - Download | Mirror
SuperPI 1.5 eXtreme System - Download | Validate
Fritz Chess Benchmark - Download

CPU Hardware Monitoring
Real Temp 2.60 (May 30, 2008) - Download
CoreTemp 0.99 (May 18, 2008) - Homepage | Download
SpeedFan 4.34 (April 22, 2008) - Homepage | Download
HWMonitor 1.09(May 14, 2008) - Download - x86 | Download - x64 | Homepage

This post has been edited by sniper69: May 31 2008, 01:45 AM

i prime my system while watching movies, surfing and even doing some work, that's because we're using low priority CPU, you should try on high priority (say 8 or 9), then you should see...

check the load temp...


, 80°C

eh... this is E2xxx processor thread...

This post has been edited by sniper69: Mar 18 2008, 10:09 AM

SuperPI @ tight timing + higher CPU clock total pawnage

i remember the old days when i'm on DDR 700, while some at DDR 500 IIANM, but mine @3-4-4-8, while him... extremely tight, it's not 2-2-2-5, it's way tighter than that and some figure was at 0 value...

well, that's the old days, currently i'm on 2x1GB + 1x1GB (3 RAM Modules) with loose timing (5-5-5-15) @DDR2 800MHz, also Kingston KVR + Aeneon..., not badla for crappy chipset available

overclocking isn't entirely about luck... it's about get the most potential possibility of your (whatever) processor, RAM and GPU you have at the moment...

woo kucing, hold up... your E2140's VID is 1.1875V? , that's good dude... wow, must be one of the rare gem huh...

i change the title to

Intel Celeron (E1XXX) & Pentium Dual Core (E2XXX), so that people who bought E1XXX can join us , IMO, E1XXX it's just another Conroe's srtripped cached from 1MB to 512KB

updated too, 1st post ... so... the only forummer i know is rlhc17, he bought E1200 and managed to get 3.6GHz, so Raymond... show us la...

this is my E2160 screenie on stock voltage with VID @1.3125V, the timing not yet tweak that time...

yeah... currently, but hope we'll get more , the processor pretty cheap, but not as cheap as E2140 since, last i know E2140's price @RM220~RM230, while E1200, can get around RM185~RM225 (IIANM) (pardon me if i'm wrong aight... )

checked through some review site about the processor, seems like the cache affect the performance

as for the Celeron family, there's only E1200 (base on Intel Official Site), but from other source, we got E1200, E1400 and E1600

taken from XbitLabs.Com

just for reference aight...

i think you should stop right there on comparing AMD vs Intel in this thread , later flame war begin le... and we don't want that... unless it's AMD vs Intel thread, then it's ok la... (although it's not right to do so too...)

agreed...

enough le... later sambung², then sambung and another one sambung and it's endless topic about this vs that

tried on lower multiplier? tried raising the voltage on NB? i don't know (not sure though...), but that's what i did on searching maximum FSB , lowering multiplier with raising voltage and FSB like mad

yeap, using it... well, frankly speaking, it's a good board (considering using dual core system on both Mars (as in my previous setup) and this DK P35 T2R-S)

+ve
+ good in overclocking
+ i believe can reach 500MHz FSB, only that my processor and RAM that hold it back
+ vdroop still got, but not as many on quad core system
+ fine tuning RAM timing

-ve
- 4 layer PCB
- need a good airflow or else, "running naked" , since the SB and NB cooler is in passive
- not as good layout as Mars (on Mars, barely touch the graphic card PCB when removing RAM)

that's all i think... other than that... none, i can't really push the board too high since i'm on crappy RAM with dual setup capalang PSU

i'm not so sure on running 45nm on this DK P35 T2R-S, but our friend here, mfcm already use E8400 IIANM , you can ask him

, kinda shock when knowing known, good reputable shop won't accept the board even though actually we bought it from them...

i'd go for Mars , why? you get a lot freebies and IMO, i rather to go for higher end DFI than low-end DFI because of the feature offered, not that overclocking la, but the heatsink and so on... , not to mention, UT got 6 layer PCB which is better than 4 layer

IMO, your Hyper 212 should be allright, my HR-01 can fit nicely not even touching the NB heatsink...

it's RM585 from DaRkSyThE @ Foxconn Mars

the BSEL mod seems promising, for some cases, we can get higher since we're at 266MHz, while some case... seems like hit the wall already... IMO it's like "flashing new BIOS" on processor , i'd like to try but to need to get a conductive ink , it won't damaging your processor... just make sure when "drawing" the line...

whoah... we have highest E2220 here, and it's new too , anyway... i remember in eXtremeSystem.org got a pinned thread with Stable@Stock. anyway... what board you're using? i'm afraid that's because of the vdroop or the E2220 of yours is bad chip...

intel IIANM, love high FSB

erm... try on 333x9 with DDR 333 Memory, it'll on 1:1, if it's a good chipset, you can even tighten the timing