Started overclocking with my pentium 2160 yest. Currently got this far



Am a lil worried as the temp reaching 55C with my tuniq tower . Is this normal?

Ok good to hear that. No coz i was a lil suprised.......lastime when i oc with my amd X2, raise the volts to 1.5v, the temp was still at arnd 50. Tried superpi 1M got 19.9sec . Will post screenshots soon.

Done



But u get 18 sec at what speed huh? Hmm.....hvnt fine-tune my ram yet. Lastime with my amd system it could do 840mhz with 4-4-11-15-2T. Here hvnt try yet. Am using Team value ram atm

Updated.......played with my ram and this time shutoff all unecessary processes



@a1098113
Quite close to you ady
Btw since you also hv team value i wanna ask u, currently i am having a problem booting above 850mhz even at 5-5-5-15. Strange thing is i can boot fine at 850mhz with 4-4-4-11 Any ideas?? I'm ald overvolting it to 2.2v. Lastime with my amd system the ram nvr used to be stable above 900mhz.

EDIT: just realized the screenshot i took doesnt show the ram speed Anyway it is at 426(852mhz) with 4-4-4-12-2T

EDIT2: suddenly I'm booting above 850mhz. Weird More testing to come

This post has been edited by joe_star: Mar 21 2008, 06:05 PM

hmmm......realized smth. Above FSB380 any other multi except 9 is useless. Comp wont boot. Any ideas? I am using bios 15.

Suicide run



Actually can say the proc has surpassed my expectations. But now must wait if i get a watercooling kit to test more . Anyways....my other problem is still there, I cant boot above fsb400 with any other multi except 9X. Is it FSB wall with the proc or maybe bios??

currently using tuniq tower But i didnt stress test at 3.6ghz tho. Highest i could reach that i stressed was 3.5ghz. At that temp it was touching 73 ady

Wat to do.....all procs (and rams too) arent made equal . I cant reach ddr1000 wit my team value and my proc luuuuuvs volts

well u can see mine from screenshot......bios set 1.71v In windows 1.69v Dun dun dare stress, just quickly run superpi 1M then downclock

Aih......i just want to clock higher with 8X multi, but cant boot higher than FSB400. Even FSB400 is not stable and often doesnt boot. But with 9X it boots without issue. Iritating!!

eh.....why do i see you here? joined darkside also?

hmmm......would be interested to see sum1 put that to the test

Ok....so its not an FSB wall of the proc. Just tried with my 9X multi and i raised it to FSB425(x9=3.825ghz) and the comp would boot and enter bios. But the moment i set it to 8X, the comp always hangs after rebooting. Any sifus plz advice. Tq Tq Tq

vcore was arnd 1.65v. I was just trying to test if my proc reli has an FSB wall or not....which aparently it doesnt. SO still wondering whats the problem with 8X multi

---

Added on March 23, 2008, 2:27 amCurious if any1 out there had the same prob?

This post has been edited by joe_star: Mar 23 2008, 02:27 AM

hmmm.....check the batch la. M0 should be SLA8Z

Well stable is a relative term la. I ran OCCT for 5 hours and i consider that stable. Now I'm orthosing and proly gonna run it for 8-12 hours. Then i'll post a official screenie

VID is yhe stock vcore i tink. Can any1 else confirm?

8 hours ady. Enough by my book



Gonna use this setting for daily use. Anyway.....as for volts, its 1.44v b4 vdroop

Bro am using Abit IP35-E flashed to bios 15 with Team Value ram 667

Can see my temp from my screenshot. It goes from 55-60 with average arnd 56 to 57. Am using tuniq tower with cap ayam thermalpaste and fully naked pc atm

Set the fan speed a lil higher la. I've got mine set at half.