i tot nid to stress the ram togater? no nid?? 3.0 @ 1.3v is for 24/7 setup.. the ram runing @ 333mhz 3-3-39 better or 400mhz @ 4-4-4-12?

If you're overclocking your CPU, then you have to stress it first with "Small FFTs". This will stress the CPU to the max. Once you know it is stable at whatever OC you've set, only then do you stress your whole setup using "blend" test....

Normally I use Small fft + Large fft stress together... If processor not stable.. Either one will show error..

Ish .. I already got bored with my processor.. 3.4Ghz that's all.. I wanna try E4xxx series.. ( Cause low budget to get E6xxx ) ..

Any recommendation?

This post has been edited by Amedion: Apr 16 2008, 05:18 PM

ok...now @ 360fsb... n not dat very stable.... increase up to 1.29v for NB ok rite???

---

Added on April 16, 2008, 8:29 pm1.33v??? Sure ar??? hehehehe...i also takut later on might fry it badly...




This post has been edited by rozz_1291: Apr 16 2008, 08:29 PM

Of course not stable lar .. You use cap ayam PSU !

jus wanna ask if dun increase the Vcore...wats de max FSB u all got?...
i've tried on F190-HD, IP35E n MARS...i got 375Mhz...

---

Added on April 16, 2008, 9:12 pmto Amedion:
ur TR still for sale?...i interested...
but wanna noe how it perform 1st...


This post has been edited by razr_sped: Apr 16 2008, 09:12 PM

Woah bro still din buy new PSU ah?

aiyak!e-view psu...suicide lor

Ah.. RAM setting.. I'd prefer the 3-3-3 one.. 3-3-3 setting always looks cool but I think you better try superpi and select which setting is best (fastest).. perhaps if you can get 4-4-4-x at over DDR2-1k then, it'll be very nice..

good oc at stock volt.. if you use good psu + hsf, don't afraid to bump your vcore.. my suggestion is not to go over 1.45vcore for 24/7 setup.. I had mine L2 stuck at 3.2Gig only at 1.40vcore.. shame that has to put 1.55vcore just to get 3.3Gig stable but not worth to get extra 0.1Gig for such voltage increment..

don't worry about blend test.. I favour them over small fft as you want to make your system stable 24/7 not just the proc rite??

mine below.. nothing to be proud of.. just 3.2Gig.. you can go higher

This post has been edited by baok: Apr 17 2008, 08:12 AM


Attached thumbnail(s)

My motherboard can reach 440FSB without increasing voltage for NB..

Anyway, yes the cooler still up for sale..

You judge urself if it's good.. I don't know ..

425fsb for E2xxx is indeed very good.. few E2xxx can go past 400fsb these days..

Yes 425 fsb is indeed good already...hardly many can do tht also

This post has been edited by Bigblock: Apr 17 2008, 01:47 PM

no $$$ lor.....

i think a lot of older batches can do 420 but not many can do about 440Mhz.. even mine i find it tough to get 440Mhz*8... e2160 should be able to get 450Mhz... coz the average OCing for e2160 is about 3.6Ghz..

rozz, oi, beli new psu that can support the stress and then OC.. be patient like i am at the moment. I have not OC-ed in a month now

Aiyo.. Why I so stupid.. Now only realise my motherboard supports Flex memory mode..

Therefore, I no need to find 2x512mb to run Dual Channel.. Just throw in another 1gb RAM will do..

Will flex mode overclock as good as dual channel?

This post has been edited by Amedion: Apr 18 2008, 12:39 PM

@boak
thx for your advice.. now running my processor @ 3.3ghz 1.425v
my ram sux can do 1k mhz at 4 4 4.. the max is only 950mhz @ 4 4 4 setting


Attached thumbnail(s)

Value Ram can do those clock and timing is damn good already ..

Help me oc this rig.. still newbie about intel and ddr2 oc..

Dual core e2160
DK P35 T2-RS
Team Elite 1GB X 2 DDR800 5-5-5-15
Coolermaster 550W
Stock heatsink

[attachmentid=446850]

Need to use divider..?

This post has been edited by sub_noob: Apr 18 2008, 04:34 PM

What else you wanna do with stock heatsink?

Try set the RAM to 2.40 Multiplier so it run at 832Mhz 4-4-4-12 ..