VID is yhe stock vcore i tink. Can any1 else confirm?

Vid is basically a value that the motherboard uses to set the core voltage, and i believe it varies with the motherboard used. Like my abit ip35-e, the Vid, is 1.325V, thats the lowest Vcore that the BIOS has. However, this is not the actual voltage of the core

---

Added on March 23, 2008, 10:35 amit can said that the Vid of your board is 1.325V as thats the lowest voltage the motherboard gives u to run your proc

This post has been edited by a1098113: Mar 23 2008, 10:35 AM

O... Mine is 1.300v

well if your motherboard has to offer 1.30V as your lowest voltage for the processor, thus should show in Vid=1.30V too.. does it?

---

Added on March 23, 2008, 10:49 amhmm after a discussion with silver, i found out that the definition given by a forummer in one international forum is wrong, misunderstanding perhaps..

from IMHO, i think Vid is the how much voltage needed by the motherboard to support the strap provided by the board or the p35 chip for example. for example if the strap is 333Mhz, then 1.325V should be able to support any value at 333Mhz*n. I might be wrong... this is just an opinion

But for jargon which doesnt make sense, to me at the moment

http://en.wikipedia.org/wiki/Voltage_Identification_Digital


This post has been edited by a1098113: Mar 23 2008, 10:49 AM

hav any ppl here using E2160 + MSI Neo F combo?
can teach me how to OC up to 3GHz stable with bios tweaking?
coz i cant get it stable at 3GHz....frustrating

try 334*9? see whether you can on default voltage.. do a screenie and post it here.

me using E2160 + MSI P35 NEO-F not combo.. haha!

someone teach me what is exactly VID... so many definitions... experts come in...

yes,same case,but different ppl asking after i sleep tis continue

8 hours ady. Enough by my book



Gonna use this setting for daily use. Anyway.....as for volts, its 1.44v b4 vdroop

btw bro...wut mobo n ram r u using?

I'm not sure what VID stands for, for i supposed it's the min required voltage that a cpu would pass all those straineous tests [ Burn - in (hot,cold,room) , final tests etc)] So that's how the cpu is rated, Bin 1,2,3, etc

Mine for example is 1.1875vid. does 3.24ghz on 1.325v

Woah... So VID the lower the better? Some sort categorized by quality too?

woo kucing, hold up... your E2140's VID is 1.1875V? , that's good dude... wow, must be one of the rare gem huh...

Yeah... Sounds superb! 3.24ghz with 1.325v already very geng...

yeah kucing does have it rare... makes my proc soundlike a mere cheapskate proc...

bryanyeo87 try 1.7V or so on liquid with E2140 before

i have tried 1.7V on Cm Hyper 212 la... haha.

all sifus here can show the temp in 3.2ghz full load? togater with the cooling solution? coz i feel my processor are very hot..

Max 60'C core here... Cooling solution is Asus Triton 70 with 1 9cm and 1 8cm fan. The thermal paste will be Tuniq TX-2.