my cooling solution is CM Hyper 212... and thermal paste was Evercool Sidewinder... cheapskate thermal paste..
Intel Celeron (E1XXX) & Pentium Dual Core E2XXX, Discussion & Compilation [v2]
Intel Celeron (E1XXX) & Pentium Dual Core E2XXX, Discussion & Compilation [v2]
|
|
Mar 23 2008, 03:25 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,119 posts Joined: May 2007 From: Home |
|
|
|
|
|
|
Mar 23 2008, 04:16 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,991 posts Joined: Jan 2007 From: Seri Kembangan |
i am using ttbtvx, with lowest fan speed, full load can goes up to 65c... even hotter than x2 @ 3.2ghz..
|
|
|
Mar 23 2008, 04:22 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,810 posts Joined: Mar 2007 |
QUOTE(heizad @ Mar 23 2008, 12:45 PM) Bro am using Abit IP35-E flashed to bios 15 with Team Value ram 667 QUOTE(hengmy @ Mar 23 2008, 03:12 PM) all sifus here can show the temp in 3.2ghz full load? togater with the cooling solution? coz i feel my processor are very hot.. Can see my temp from my screenshot. It goes from 55-60 with average arnd 56 to 57. Am using tuniq tower with cap ayam thermalpaste and fully naked pc atm |
|
|
Mar 23 2008, 04:26 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,991 posts Joined: Jan 2007 From: Seri Kembangan |
|
|
|
Mar 23 2008, 04:34 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,810 posts Joined: Mar 2007 |
Set the fan speed a lil higher la. I've got mine set at half.
|
|
|
Mar 23 2008, 04:38 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,991 posts Joined: Jan 2007 From: Seri Kembangan |
|
|
|
|
|
|
Mar 23 2008, 05:28 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,494 posts Joined: Dec 2005 From: Wangsa Maju |
ermm my VID is 1.2875v. So what does that mean? Mine good or not?
|
|
|
Mar 23 2008, 05:32 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,119 posts Joined: May 2007 From: Home |
ok what... not bad lor... but seriously, i dont think it means anything in the OC world... does it?
|
|
|
Mar 23 2008, 05:35 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
7,173 posts Joined: Jan 2003 From: PCH |
i change the title to
Intel Celeron (E1XXX) & Pentium Dual Core (E2XXX), so that people who bought E1XXX can join us updated too, 1st post |
|
|
Mar 23 2008, 05:36 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
4,947 posts Joined: Nov 2007 |
QUOTE(a1098113 @ Mar 23 2008, 05:32 PM) If according to kucingfight, affect alot in overclocking... Normally we need to +0.1~0.12v to overclock an E2160 from 1.8ghz to 3.2ghz. So if you VID's 1.3v, you'll need ±1.41. Lets compare kucingfight' E2160 with a VID of 1.1875v and my E2160 with a VID of 1.3000v. kucingfight needs ±1.325v to run 3.24ghz while I need ±1.425v to run 3.2ghz This post has been edited by Silverfire: Mar 23 2008, 05:39 PM |
|
|
Mar 23 2008, 05:42 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
7,173 posts Joined: Jan 2003 From: PCH |
this is my E2160 screenie on stock voltage with VID @1.3125V, the timing not yet tweak that time...
![]() |
|
|
Mar 23 2008, 05:43 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,119 posts Joined: May 2007 From: Home |
QUOTE(sniper69 @ Mar 23 2008, 05:35 PM) i change the title to alright.... but is he the only one here with a celly??Intel Celeron (E1XXX) & Pentium Dual Core (E2XXX), so that people who bought E1XXX can join us updated too, 1st post |
|
|
Mar 23 2008, 05:43 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
4,947 posts Joined: Nov 2007 |
Interesting stuff... Sooooooooooooooooooooo, what's VID for actually?
|
|
|
|
|
|
Mar 23 2008, 05:46 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,119 posts Joined: May 2007 From: Home |
we should ask the old timers actually, what is VID... i am noob too, i want to know whats it as well.
|
|
|
Mar 23 2008, 05:48 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,991 posts Joined: Jan 2007 From: Seri Kembangan |
i tot all same batch of processor have the same vid.. lol..
|
|
|
Mar 23 2008, 05:48 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
7,173 posts Joined: Jan 2003 From: PCH |
QUOTE(a1098113 @ Mar 23 2008, 05:43 PM) alright.... but is he the only one here with a celly?? yeah... currently, but hope we'll get more checked through some review site about the processor, seems like the cache affect the performance as for the Celeron family, there's only E1200 (base on Intel Official Site), but from other source, we got E1200, E1400 and E1600 |
|
|
Mar 23 2008, 05:51 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,119 posts Joined: May 2007 From: Home |
cache always affects benchmarks and performance, no doubt. E2140s are not really available as much as e2160 rite? e2140 now in pczone is around rm195... but in bulk i think.. nowadays ppl rather hit the latch on e4 and e8... so more promotional drive is needed... looks like we mght hit version 3 soon..
|
|
|
Mar 23 2008, 05:58 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
7,173 posts Joined: Jan 2003 From: PCH |
|
|
|
Mar 23 2008, 06:00 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6 |
Wow...that is serious man.
Is it cache more, performance more?/ -pWs- |
|
|
Mar 23 2008, 06:00 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
4,947 posts Joined: Nov 2007 |
About 20% average...
|
| Change to: | 0.0299sec
1.19
6 queries
GZIP Disabled
Time is now: 18th December 2025 - 08:54 AM |