my alternative set up to utilise the ONR's Wifi

the ONR - 2.4GHz (signal is stronger compared to 5GHz, so even a single unit is enough)
own mesh - 5GHz (signal is weaker but nodes are everywhere)

I get stable connection.
No need to deal with the idiosyncracies of devices continuously switching 2.4GHz to 5GHz and vice versa.

i ask my friend in TM, maybe this is SME deal.. the time has come for SME customer, aka biz package... offer for loyal customer

This post has been edited by zeronehza: May 15 2024, 06:25 PM

Stay tuned for upcoming offer for 1gbos and 2gbos plan. TM sales on 1gbps and 2gbps plan is extremely poor. Won’t be surprise cheaper pricing for this 2 category soon.

If that allowed..., TM can become like TIME, by pushing ME 171 with AssociatedMePoint 0x4001, ME 148 (OMCI PPPoE) and ME 329

ME 171 (Extended VLAN Config)
tldr; OLT assign VLAN from ME 84 to LAN 1 [0x0101] (Unifi), LAN 2 [0x0102] (Maxis, Celcom, DiGi, etc...), LAN 3 [0x0103], ...
TM can even push to AssociatedMePoint to [0x4000] bitwise cause PPPoE Interface to be created and disallow Bridge

ME 148 (Authentication Method)
tldr; OLT push what protocol and account

ME 329 (Virtual Ethernet)
tldr; OLT ask ONT to create a Virtual Ethernet (like VPN Adapter) and assign VoIP, TR069, PPP on that Interface, thus, disallow Bridge

Rough diagram how ONU works


This happen at Indonesia when ISP cracking down Rouge ONU



Indonesia people are crazy, after bridge, and hack the OLT to bypass OLT QoS to get no speed limit... that is why OLT can block Bridge Mode

This post has been edited by Anime4000: May 15 2024, 08:35 PM

The latest black onr for 1/2gbps can bridge? Because someone reported before, cannot use the ONR

Surely can. Bridge block should be OLT level. If TM enforce such policy even the white one cannot bridge right now.

This post has been edited by Ashren: May 15 2024, 08:53 PM

I don't know, suppose today I received Black ONR part of testing, the installer had an accident, tomorrow morning I receive the Black ONR,
Then I can start reverse engineer, hoping UART not disabled and use same SDK

Yeah. Looking forward to your sharing.

Bit the bullet and got UM Home 5G... RM68 2 years contract...

300-400Mbps speedtest... lets see...

Maxis can offer 1Gbps for RM159 provided if you use Maxis postpaid RM60 and above

Won't be surprise if TM did something similar to counter offer

Isit easy to get transfer ID? Understand from TM that now they have diff department to handle termination cases.

Just got this unit for RM70. Happy loot.





Unfortunately, I am unable to test 2Gbps connection since I am using 30Mbps fibre only at the moment. Will be useful for me to explore the features of the router lor.

Try run with your OLT and pppoe details and see if TM allows it coz im consider getting one (or more)
to swap out my mom's homestay and her siblings that i managed to a single box setup for ease of maintenance hehe.

ohh too bad i don't like Combo Box like D-Link OLD BTU Huawei is good for 100 - 800Mbps
100Mbps - 800Mbps overkill GPON Stick

yah old ONU simple huawei but prefect can use custom router with PPPoE i know

how to deal SME customer Biz
i have shop office BIZ SME but expensive that why wanna get cheaper 500Mbps RM119.50

can you pm me you friend TM i wanna do apply

how about home can change BIZ SME ???

Convenience heh.. hahahaha. Agree with you. Single unit. Easy maintenance. Worst part, its D-Link.

How and where to get this? I'm planning to get 1 to test mine.

its not confirm yet, but will update if any,
consumer can change to sme (must have ssm)
sme cannot change to consumer , unless user request relocating at home

I just casually search on Facebook Marketplace and Carousell. I got this unit from 1G unifi user from Facebook Marketplace for RM70. I find the value for the money there, so I decided to buy a unit.