About 12sec, for 16feet folding gate. I don't know if this speed/timing is ok or not. Too fast? Too slow? Or normal?

Mine originally was about 13 sec for swing gate, last week the board fry by lighting, change to another board and adjust it to faster. Now is about 10sec. 12 sec should be normal.

Just to upadate, I too had my DCmoto swing installed by Winson yesterday morning. Took ard 2hrs. Winson workmanship very good. His macai even water-level the control box to make sure it is perfectly straight and Winson level the motor arm attached to the gate. Finally, didn;t install the black rubber to hold the gate, not necessary. You can install everything first, test it and if you want you can install the rubber after testing. All in all satisfied.

But the movement to not perfectly smooth, maybe all auto swing gates are like that. First time using automate.

This post has been edited by ryancfs: Jul 13 2013, 01:13 AM

What the rubber use for?

See reply #1321

So DC Moto don't have rubber? How to stop the gate if without rubber?

i'm not sure about other motors/brand ( not arm type )

i'm using dcmoto for slide, the motor movement's noise is like wht u said not smooth..
in canto ' chok-ha chok-ha' liddat when it is slowing down...
but u don't see ur gate movement ' chok-ha chok-ha' , it is the internal gears i think...
or they kenot program it to go fast n slow smoothly like a stepper motor??....

This post has been edited by H2D: Jul 15 2013, 01:34 PM

Yr sliding also chok-ha chok-ha meh? Sliding normally very smooth one...

Any sifu here can advise any remedy to smoothen the swing movement? Mr. Lim?

during start n constant speed yes very smooth, when the time wana slow down, it will 'chok'
like the motor supply was turn on off on off to slow down the motor.... i try to take video...

Ok I choose this company to replace my old autogate moto. But here the problem, after paying around RM1300 for the moto n installation,

He NEVER GIVE ME A SINGLE RECEIPT YET.

Is this how this company works?

Call him no answer, call company tel number auto close.

You should get the receipt if not how to warranty.

What did you install for RM1300?

http://ots2u.com/product_info2.php?id=77

this one including installation fees.

after post here, finally receive his receipt thru my email....

Before i start to do my renovation on the front gate ( demolish the existing pillar and widen it - original come with a autogate system but not functioning - Subsale hse ), what is the things that i need to prepare ie. wiring, any opening or anything else for a new set of autogate system. How about the control panel inside the hse so that i can prevent any further hacking or ugly trunking..
Expert please help..Thks in advance

Hi bro, can I have ur installer contact pls?do they cover pj area? And also do u mind can pm me price of u system? Tqvm

Hi all forumers,

I am impressed by all the knowledge contained in this thread on the topic, especially from jimmylim85.

This is very useful when I am in the market for an autogate.

I need a 17 feet wide, 6 feet high, fully aluminium folding gate. Design is simple square, horizontal bars. With my research (I've been to all those reno/furniture fairs), I am down to 2 companies which provide a complete package i.e. full aluminium gate, motor, installation all-in type. The 2 companies are C.S.A. and Wei Wang. The prices and features quoted to me was:

CSA- For 17 ft by 6 ft, folding gate, DCMotor 925, all in price was RM6300 (Usual price is RM7500, now got promo)
Wei Wang - For 17 ft by 6 ft, folding gate, DCMotor 925, all in price was RM7500 (Usual price is RM9000, now got promo)

Both companies used exactly the same motor DCMotor 925, so no comparison (by the way I am convinced with DCmotor anyway). So the difference is in the gate itself. To be fair Wei Wang's gate is alot better interms of workmanship, meaning the soldering joints are seamless, bracket all are seamless with gate, in terms of overall built quality, its better. CSA's gate is abit rough and you can see the brackets, nuts etc.

I was told by these 2 companies, they are the only one doing a fully-aluminium gate.

My question is, are the prices reasonable, even for CSA gate which will cost RM6300? Got cheaper alternatives out there (I still want fully aluminium)?

why not stainless steel ???

Frankly, I always thought stainless steel must be silver color (am I correct?). And presumably, stainless steel would be heavier?

2013 style Aluminum Gate. If fully aluminum can sell back to them but can't get 100% return lar.

Hi, sifu here do u know how much to service the autogate ?