No problem at all. Not much hassle. But is always advisable to get both task together at the same time. Reason is simple, folding gate system have the tendency of having either small opening gap or else end up big which is disadvantage to owner for losing space available upon gate opening. Whether the motor gate system able to open smoothly and to its maximum degree opening depends on the fabrication of folding gate and measurement. 

Increase price? Since when start?

thanks. anyone in LYN engaged his service before?

Just sharing my experience with dcmoto 925w.

Installed abt 1year++ but the board already kaput few times.
Had being changed for 2times due to malfunction under warranty. Last changed was on oct2014.

Very unfortunate that on december 2014 kaput again and now send to repair which gonna make it 3times! replacement sigh~

The only good thing is, the response from the installer is good whenever the gate kaput. He willing to come to check and take the board for checking even during weekend and raining. Respect~~~

Open up ur control box and check the board type. If it the new board showing setting left for AL swing type and right button for folding type and top button for normal w model. Then just press and hold the button on the right hand side of the board and can see the light on. Don't let go of the button until u finish the whole process. Then use your other hand to hold the remote beside the the board and press the top (12 o'clock) to let the board sense the remote and active the comment to the board.When you do that u can c the light blinking, wait until it stop blinking then the whole process is over. Let go the button on the board. Then press open left and then right, if both open accordingly then it's already fix. Then try both side.

All the best frd

No need to worry.

It's not problem but I something short circuit the board. Normally it dun change the setting it self

Anyway all the best