b4 dis i'm doing 400*8 @ 2.64vore & vdroop to 2.232

after changing mobo & ram, can do 405*8 @ 1.232vrore, no droop @ all

note: C1E, ESIT & loadline calibration enable
Stability test wit 5 loops ibt, max stress



This post has been edited by tech3910: Jul 22 2009, 09:41 AM

that one help improve vdrop and vdroop.

Dats y i enable it.
Usually even enable, vdroop still hapens, just less.
now no vdroop @ all...

---

Added on July 22, 2009, 2:41 pmjust tested with 465*7 = 3255MHz (ESIT disable)
also works like charm too.......

dats pretty nice FSB for a quad and just 1.232vcore.......

This post has been edited by tech3910: Jul 22 2009, 06:58 PM

Wa.. the gigabyte EP45-UD series so good? feel wan purchase and try

bro... wats the purpose of C1E, ESIT & loadline calibration? wats the diff between enable it and disable it?
my setting... 378x9 @ 3.4GHz... Vcore is 1.4V... how to decrease the Vdrop?

This post has been edited by S16: Jul 22 2009, 09:12 PM

Those r power saving feature doing things like dropping vcore & multiplier to reduce speed during idle.
disable to see how far u can push.

as for vdrop & v droop........example.......
lets say u set the vcore 1.4 @ bios, the actual vcore wen u check wit monitoring s/w is actually a little less den 1.4. dis is vdrop.
vdroop is the vcore dropping during stress. wen u stress test & monitor the vcore, it drop slightly.

loadline calibration is enable to reduce the vdroop hence improving overclocking because u wan the vcore to b stable during stress.

and u want less vdrop and vdroop and not want them to increase.

sory2... edited bro...

loadline calibration is 2 decrease vdroop.

Thre is ntgh u can do wit vdrop, it dun matter anyway.
Just set the vcore slightly higher den wat u intended.

Q6600 is still kicking & alive with this board...

im using EVEREST Ultimate Edition software... which one is nb temperature? motherboard temp or cpu temp?

This post has been edited by S16: Jul 24 2009, 01:56 AM

cant seem to have any nb temp there >.<"

Hi everyone!! i'm newbie in this forum.
I'm one of the sabahan got Q6600 GO step...

Not much to say. But i'm need advice also from you guys in here..

Here is my Rig~ name: BloodRage Q6600


Processor: Intel Core 2 Quad Q6600@2.40GHz (Current@3.90Ghz With Aircool)
Motherboard: Asus P5Q3
Graphic Card: Winfast GTX 260 Etreme+ 896MB GDDR3 (Singel Card)
Power supply: Tagan 1000Watt PSU
CPU Cooler: Cooler Master Gemin II + 120MM 2000~rpm 18db
Memory: OCZ Flex XLC 4GB DDR3 1333MHz C8
Harddisk: WD 1.0TB Raid 0, 7200RPM SATA II
Casing:Cooler Master CM690

Vantage Test Result






What cooler should i used? Should i get a Swiftec Watercool setup?
Or any other brand that you all know, easy to get in malaysia.

Serious cooler:kingpincooling.com
Grab a F1EE,that the price of decent liquid cooling setup

Wooow.!! Thats for real man.. Serious cooler it is..
No need casing anymore... Table Match 4 sure OC atas meja lagi la...
But i'm prefer wit watercool. What product do u think should i use..
Price not to "Mahal" Hehehe...
i was wondering, what about a CM Aquagate Max? Is it good?
and tell me ur opinion.

This is my update. Dono yet is it good enough..
Coz i seen some crazy people done about 4.2Ghz~Watercool..


But still run good enough @3.90Ghz for me..

Screw CM aquagate
Consider:MCR320,Apogee GTZ,Danger Den CBX Pro,Swiftech Micro Res,1/2" ID Masterkleer tubing,3x120mm fan of your choice and mounting kit(Internal or external mount)
Contact bryanyeo87/acther/clawhammer for more detail

Woookey! Thnx it's a great deal.. i'm lookin 4ward to Consider:MCR320,Apogee GTZ,Danger Den CBX Pro,Swiftech Micro Res,1/2" ID Masterkleer tubing,3x120mm fan of your choice and mounting kit(Internal or external mount)

i've seen da picture.. look cool.. thnx again!

oc4/3 could you please post a screenie of your temps when its on load please? =D

yeah.. i would like to see it to. How is the temps.. And Some Pic of you Nice Watercool Rig... Come on bro..

wow that's quite high clock n voltage there..
what's the load temp?