Hi everyone!! i'm newbie in this forum.
I'm one of the sabahan got Q6600 GO step...

Not much to say. But i'm need advice also from you guys in here..

Here is my Rig~ name: BloodRage Q6600


Processor: Intel Core 2 Quad Q6600@2.40GHz (Current@3.90Ghz With Aircool)
Motherboard: Asus P5Q3
Graphic Card: Winfast GTX 260 Etreme+ 896MB GDDR3 (Singel Card)
Power supply: Tagan 1000Watt PSU
CPU Cooler: Cooler Master Gemin II + 120MM 2000~rpm 18db
Memory: OCZ Flex XLC 4GB DDR3 1333MHz C8
Harddisk: WD 1.0TB Raid 0, 7200RPM SATA II
Casing:Cooler Master CM690

Vantage Test Result






What cooler should i used? Should i get a Swiftec Watercool setup?
Or any other brand that you all know, easy to get in malaysia.

Wooow.!! Thats for real man.. Serious cooler it is..
No need casing anymore... Table Match 4 sure OC atas meja lagi la...
But i'm prefer wit watercool. What product do u think should i use..
Price not to "Mahal" Hehehe...
i was wondering, what about a CM Aquagate Max? Is it good?
and tell me ur opinion.

This is my update. Dono yet is it good enough..
Coz i seen some crazy people done about 4.2Ghz~Watercool..


But still run good enough @3.90Ghz for me..

Woookey! Thnx it's a great deal.. i'm lookin 4ward to Consider:MCR320,Apogee GTZ,Danger Den CBX Pro,Swiftech Micro Res,1/2" ID Masterkleer tubing,3x120mm fan of your choice and mounting kit(Internal or external mount)

i've seen da picture.. look cool.. thnx again!

yeah.. i would like to see it to. How is the temps.. And Some Pic of you Nice Watercool Rig... Come on bro..

Wooo.. Cute Avatar! ahaks.. \()/

Hey bro, try control the Core temprature.
Try any of this CPU Cooler:
1) Cooler Master Gemin II (put 2 fan 120mm 1800~2000rpm)
2) Cooler Master Hyper 212 (put 2 fan 120mm 1800~2000rpm)
3) Xigmatek HDT-S1283 ~ recommended CPU Cooler

This 3 r the babe... Cute and stuning.. Or go 4 watercool system.

Setup ur Tuning part:

- Change CPU Cooler 1st.. important!
- Disable CPU temp warning in BIOS ( this a risk, )
- Disable auto CPU fan control in BIOS ( run ur fan 100% speed)
- Set 1.48v ~ 1.50v Core Voltage (try 1.48v 1st)
- Set 800Mhz for ur Reaper 1066Mhz ( it will increase when ur pull-up FSB Clock)
- Set CL 5-4-4-15 or 5-5-5-18
- Set 1.40v ~ 1.50v for NB mobo (try 1.40v 1st)
- Set 2.3v for RAM Voltage
- PCI-E 100 ~ 101Mhz
- Set 9X CPU multiplier
- Set 400 CPU FSB Clock (check ur RAM speed! is't increase from 800~1000+)
- save and apply. reboot.

if it can boot to windows.. try to stress with EVEREST.. This way you can view you CPU Temp...
if CPU Temp get to 50°C ~ 65°C after few min.. don't bother if CPU 80°C, test ur system with some heavy game for 15 ~ 30 min.. if nothing hapen.

Use Prime95 to check it for few long hour..

Try it, good luck!

My System:

Wow.. thats burning bro!

My Rig only reach 78c @3.60Ghz ~1.48v.. Pass stress test on Everest.
i have not try Xigmatek S-1283 yet. only see in few reviews from the net. So.. i think u should try Cooler Master Gemin II bro..
i'm using it right now

Also you can consider this air cooling for Q6600 (chek review 1st bro~ u chose it.)

- Arctic Cooling Freezer XTREME Rev.2
- Xigmatek Achilles S1284
- Scythe "MUGEN-2" 5Heat Pipes CPU Cooler

no wories bro... i'm looking forward to it..

right now i'm searching a goog tweaking with 1.3v only..
but can boot up until 3.8Ghz.. duno yet it will hapen or not..

wish me luck guy's..!