Q6600 seems like its still very famous ^^,
me oso Q6600 user and still loving it ^^,
sad , cant even try push up to 3.8ghz .
able to load windows , failed on p95 and orthos . BSOD all d way >.<"
donno wat's d problem .
btw running 1.45V on 400x9 idle something like uzairi mentioned b4 . or can refer to my siggy ^^,

bad batch of proc ?
but even me i think 1.45V is considered very high for diz proc .
seen some review mentioned could push 3.6ghz arnd 1.4v only .
not sure its true or not >.<"
tried lower d vCore n 1 of d core wont work on p95 and orthos >.<"

---

Added on April 26, 2009, 6:01 amoh btw anyone tried 3.8ghz daily ?
seems like my proc cant push above 3.6 by far .
maybe stupid RAM .
nid to get my hands on those D9GMH or D9GKX chipset RAMs .

This post has been edited by monsh: Apr 26 2009, 06:01 AM

mine running 3.6ghz 400x9 at 1.45v vID not sure but i think somewhere arnd 1.375v
anyway, tried to push around 3.8ghz - 4ghz can boot but seems like my RAM sucks hell i cant even push far from 800MHZ >.<" sure BSOD
damn i wish could get my hands on those d9gkx chipset rams and try tweak for at least 450x8 >.<"

This post has been edited by monsh: May 6 2009, 02:37 AM

i tried 850-900mhz at 5-5-5-15 at 2.0V >.<" cant get it stable .
guess its me or my RAM sucks .

i really wanted to try 3.8ghz stable daily usage
temperature is not much problem for me .
cause im pretty sure my setup is very efficient in terms of temperature control .
ambient temp perhaps 30-33C
nothing else generate great heats inside d casing .
2x 92mm fans sucking out hot air from proc and NB area .
2x 120mm pushing in 60CFM each at front part .
rad located bottom as normal for TJ07 setup .

i gotta learn more on ram tweaking >.<"

This post has been edited by monsh: May 11 2009, 04:37 AM

its not recommended lor since urs now 3.5ghz oso nid 1.475V .
1.55V is still considered acceptable .
but u nid to make sure ur casing got good ventilation and everything so d proc heat wont affect other hardwares as well .
ur using 4890 which also generate lots of heat .
dat might b d problem of ur hanging PC .
hmm , anyway changing to 850W might not solve ur problem .
even i7 OCed to 4ghz + GTX285 SLI wif overvolt mod only use around 680W .
urs might juz nid around 450W++ only .

---

Added on May 14, 2009, 9:07 pmanyone can give comment on my OC setting ?

im currently trying to run 3.75ghz at 415x9 1:1 830mhz DDR2 4-4-4-12 2.2v

vCore 1.5
PLL 1.6
vNB 1.49
vTT 1.39
vDIMM 2.2

i got reading 46C idle 55C load >.<"
to me i think still considered low temp ^^,
any comment guys ?

This post has been edited by monsh: May 14 2009, 09:07 PM

dat was juz testing bro >.<"

now testing 423x9 for 3.8ghz daily .. im getting 47C idle load 67C
vCore 1.55
PLL 1.54
vNB 1.45
vTT 1.34
vDimm 2.16

anyway, i think my RAM too sucky .
i cant even get it stable at 846mhz without BSOD >.<"
tried auto, loose timer and also tight timer .
all giving me BSOD >.<"
i nid to try these settings on good chipset RAM >.<"

yeah very bad i think .
very minimal increment oso could cause BSOD .
tried crucial ballistix could get 1150mhz at 5-5-5-15 2T
haih nid money change RAM >.<"

for ur 1st statement , yes i guess its crap .
when i wanted to buy new ram , i was juz thinking of grabbing 4GB kit dat's y .
shud haf pick team extreem D9GKX !
at least get crucial ballistix for its d9gmh .

but i heard nowadays d RAMs are from bad batch ?

anyway yeah , when get enuf money i will sell diz RAM and get d9gkx.
my dream RAM is CellShock .
but seems like not many ppl out there selling it haih ...

for ur 2nd statement, yes i agree to d quotation , dont mind d heatsink for god sake. we nid good CHIP !!!

y custom WC oso get so high temp reading ?
mine running 400x9 at 1.45v 48C idle 57C load.

but d god damn RAM limiting my OC .

is my temp reading considered good ?
if yes , i might get good chip RAM and try go for 3.8ghz for daily >.<"
any comment guys ?

possible bad batch of proc ?
some need 1.55v to get 3.6ghz stable .
hmm dat's no luck

i noe bro . shud be able to run 475x8 .
but d problem is i whenever i go for 415FSB oso will get BSOD .
i think its my RAM really noob wan .
mind share anything bro ?

wah 1.375 for 3.6ghz very nice ur proc !
i nid 1.45 but still considered ok la .

hmm uzairi me dunno play RAM so much ^^, hehe
i tried reducing timer, add voltage, tRFD set 50 PL lvl 8 , watsoever oso cant get it stable .

is there by chance dat my proc wont allow me do 3.8ghz ?

dun think so woo , i did get to boot even at 4.05ghz .
but cant get it stable >.<"
mostly BSOD all d way .

ow well , i noe dat bootable doesnt mean stable , but dat's wat im trying to tell u , even if i raise FSB up to 405 , i get BSOD >.<"
even when i pump +0.1v for dimm .

wat is diz minor timing, alpha timing, beta timing ?
mind share wif us ar ?

wat is diz minor timing, alpha timing, beta timing ?
mind share wif us ar ?

come on help us here newbies .

wat he mean is when we pump 1.5v , in bios only 1.5v but there's vDrop maybe like 1.47v .

so when u want kira bill or PSU requirement, use 1.5v or 1.47v to calculate .
rite rite ?

hehe

anyway, so im still curious wat is diz sub-timing and alpha timing ?

so little difference >.<"
barely noticable in real life >.<"
haha

hilmiangah , is dat team xtreem d9gkx ?
wat's d voltage needed for 900mhz 4-4-4-10 ? any sub timing u change ar ?
and under PL lvl is it ?

This post has been edited by monsh: Jun 10 2009, 05:02 AM

this thread suddenly become so silent wan .
haiyark >.<"

diz thread still alive and kicking
good2 .
hehe
anyway , i still cant get mine above 3.6ghz guys .
aih .
izit my RAM dat really sucks hell ?
i can boot but will get BSOD within 5 minutes .