A'aaa...Update the database hehehehe

---

Added on February 1, 2008, 3:23 amUpdated !!

16.547 - Hoodlums - 3.56GHz, 396 x 9 / GigaByte P35-DS3 F12 / 2GB DDRII-990, 5.0-5-5-15 / Arctic Cooling Freezer 7 Pro


This post has been edited by Hoodlums: Feb 1 2008, 03:23 AM

any quote about E8200 Overclocking ?
i wanna OC my E8200 to 3Ghz

need to know how...

hi...
new one here..

i wanna change my old amd 3500+ system..
but need some advise from all sifus here..
1. better take an e6550 (us94) or e6750@us104 or just jump to q6600@us146.
2. im really wanna OC those CPU (not extreme), so whats the cheapest but okay mobo should i get..
3. can i just take those KVR ram or opt for some performance ram.
4. do i need to change my stock HSF if wanna OC the Q6600.

pls advise..

If I were you, I'll spend on the new 45nm instead of the quads. You should get a better HSF is you intend to overclock - more voltage leads to added heat

Yeah, like clawhammer said, you should go for penryn instead.

Unless of course, you're looking for cheap 2nd hand CPUs..... or unless you need a cheap quad...

Frankly speaking, the difference between KVR rams and high performance rams are small.... if you are tight on your budget, KVR rams should be adequate... although the may limit you OC somewhat...

Definitely need better 3rd party HSF is you want to Oc.....

This post has been edited by kmarc: Feb 2 2008, 03:20 PM

erm..
i saw some ppl selling those dual core penyrn around Rm7++. that only 2core..
and if 4 core..sure its more than 1K..just for proc..
argh..
thats NFS pro street sure taxing my 1 core amd like hell..
even sometime my pc lockup when saving

OK,easy.Set the ram strap to 1:1,ram timing to 5-5-5-15,ram voltage to 2.05v.Then go to enter 400fsb,increase vcore to 1.26ish,sure working. Like that can do 3.2,limit should be 4ghz if board is good enough.

what tool to use to control fan speed in vista ?
lazy to use the one supplied by gigabyte

I'm not sure but maybe you can try SpeedFan?

I have an aging E6600 L710A811 On intel HSF (Planning of course to buy a better one..see how far and safe i can get with stock hsf)
And just bought a foxconn mars .....odin pro 550w.
I'll follow the noob thread and post my findings here..LOL....

Looking at the ranks, theres no one using mars.....

I'm using the MARS but I don't have a nice CPU to play with now

Mars better than IP35 Pro dude?
Hmm, quad has better benchies but I am not sure in the real life application though.

Depends which area we're talking about. 500FSB is a lot easier with MARS than IP35-PRO but IP35-PRO has more voltages settings and better board layout

im running E6750 on asus P5KR and corsair XMS2 DHX 2GB 800Mhz
i need help with OC-ing it
cause i still cant go higher than FSB 420 where others can go up to 450+ pretty easily
i need help with all those setting in my bios..im still new in OC-ing
thx for the help and time first of all

FSB Strap to North Bridge 200Mhz,266,333Mhz
FSB Freq 420
PCIE Freq 101
DRAM Freq DDR2-840
DRAM Command Rate Auto,1T,2T ?
DRAM Timing Control 5,5,5,18
RAS# to RAS# Delay: Auto or Choose 1-15 DRAM clocks?
Row Refresh Cycle Time: Auto or 20,25,30,35,42 DRAM clocks?
Write Recovery Time: Auto or choose1-15 DRAM clocks?
Write to Read Delay: Auto or ?
Read to precharge time?
DRAM static read control: Auto, disabled, enabled?

Transaction Booster: Auto, disabled, enabled?
Clock over-charging mode: Auto, 0.7-1V?

CPU spread spectrum: disabled
PCIE spread spectrum: disabled

CPU coltage:1.425V
CPU voltage reference: auto or ?
CPU voltage damper: auto, disabled, enabled?
CPU PLL voltage: auto, 1.5v,1.7v?
DRAM voltage: 2.1v
FSB termination voltage: auto or ?
North Bridge voltage: 1.25v
North Bridge voltage reference: auto or 0.67x,0,61x

This post has been edited by v1rtual: Feb 3 2008, 10:51 PM

you will need around 1.45V to be at least able to do 440Mhz on the FSB. and a bump on the Vnb and put a fan on the NB. Check your heat dissipation on the proc as well.

I just finished an excellent article done by kmarc....awesome intro to OC-ing......I dont dare OC with my Intel HSF....the proc is precious to me....LOL...

Basic Guide - Overclocking C2D/C2Q

now im putting Vnb @ 1.25..how much higher should i put?? the next level is 1.4v, isn't that a little too high??
for now, i dont think i have a problem with temp, idle around 26-30c running @ 3.36Ghz
i will try increasing the Vcore again then

so..do u mean ur e6750 stable around 3.36GHz only..

no, its just me
i could only go till 3.36Ghz, thats why im not satisfied and ask for help here
go above that i cant reboot to windows ady

maranello55, you can just try bit by bit. Normally you can already OC by adding some FSB without having to increase the voltages.

v1rtual, when you lower your multi and maintain the same FSB (420Mhz), is it stable? If it's not, the motherboard voltages or RAMs are having issues, not the CPU. If it's stable, move the multiplier back to 8 x 420 and increase Vcore. 1.425V isn't a lot because after the vdroop, it's probably ~ 1.35