just posting my achievement from Penryn thread here..

may i know what are the possible caused that my mobo temp go up to 150c when i only increase my Vcore to 1.425??


This post has been edited by v1rtual: Feb 4 2008, 05:39 PM

ive tried the built-in MARS Instant OC...up to 20% which brings my core speed up to 2.65 GHz....Core temp hovering around 50-52...for both core...

I dunno much about OC-ing but logically what i want to achieve is rock solid stability, cool, higher clock without compromising much of the proc lifespan.

Possible?

Or a simple solution to that is just to upgrade

its shall be wrong reading by ur software
try reset BIOS & OC once again..

its not only a reading from the PC probe
i have tried to check from the bios, it shows -150c instead, why minus??

well, its shud be technical error
have u try reset to default BIOS setting??

This post has been edited by gengstapo: Feb 4 2008, 10:46 PM

after i changed back to 1.4v and 420fsb and restart, it is back to normal temp
will be trying more OC next week, and update here for more help
going back hometown tomorow morning, busy with packing and stuff
Happy Chinese New Year for all

This post has been edited by v1rtual: Feb 4 2008, 11:37 PM

try to up your Processor's FSB and overclock your ram...
make it a 1:1 ratio.... FSB MHz same as RAM MHz
it should be no problem...
and to up your FSB, please do it slowly....
increase 2 to 3 each try until your computer can't boot
then restore the highest FSB you has reached...
do the same thing to your RAM as well... try to keep the FSB and RAM running at the same frequency (MHz)
tune down your FSB to suit your RAM Mhz

walao.... -150 !!!!
SUPER COOLING !!!
omg la, wad motherboard are u using?
maybe motherboard problem?

This post has been edited by general_odin: Feb 5 2008, 12:23 AM

error in reading?... wat mobo u using?

Here's my update OC results,
hehe, mine a gem proc few days ago with relatively cheap price

cschun86 : Intel C2D E6750 (G0 stepping) : 3.7Ghz @ 1.392V (full load) : Gigabyte P35-DS3 rev 1.0 : Gskill PC8000 DDR2 1000mhz 4Gb Kit : 926mhz , 5-5-5-10@ 2.1V : Thermalright Ultra 120 Extreme & Thermalright HR-05 SLI/IFX

1st pic is the OC result stable at 3.7ghz,
2nd pic is super pi result at 3.8ghz which is not tat stable,
no time to tweak it to make it stable,

will do if got time later...

Bro tAmp0i..
Why not update database?

mine,

common issue..

thats a lot of ppl are put off with asus probe.. it sometimes whos my vdimm went 3.0v..

i feel like urs is a bit slow .... e4400 @ 3.04GHz only get 28 secs?
i tot supposed to be around 19-21 secs ?
is something else running in background?

This post has been edited by mmohdnor: Feb 9 2008, 11:52 PM

hint hint green go button..

again hint HINT.
if u feel its slow.


This post has been edited by cstkl1: Feb 10 2008, 01:49 AM

Followed kmarc OC guide....very nice...

http://forum.lowyat.net/topic/623648

Now im running a stable 3.0GHz....temp under Prime95 didnt exceed 65c as in 30 minutes stress test, as per recommended by kmarc. I ran 3.2GHz but temp soaring up to 68-70c....

Im on intel factory HSF so abit hesitant to go higher.

Going to leave the machine to do 6 hours stability test.

---

Added on February 10, 2008, 8:28 amPlanning to get some entry level cooling kit for 775 CPU - any recommendation?

This post has been edited by maranello55: Feb 10 2008, 11:49 AM

ooh.. he run superpi with orthos running in background ... i tot he just include the superpi screenie together with orthos
ok then , sorry

Hi guys, need some help here
this is my first attempt to overclock my processor so i need some 1 to check if i do something wrong



anything wrong with my OC?

thats a nice start to OCing bro. keep it up go for the stars

guys i'm running E8400 at 4.4Ghz 489bus X 9 at 1.45v
do i need to increase my MCH and FSB voltage to get stabality ?
i'm using Gigabyte P35-DS3P Rev 1.0

wat voltage shud i use ?

This post has been edited by Ezonizs: Feb 12 2008, 11:35 PM