I'll kick this off with my ex darling.
Come come, all Ah Lian owners, mali mali mali show off ure Ah Lian.
The Lian Li League V3.0, Wheeeeeeee V3.0 already!
|
|
 Jul 2 2007, 10:50 PM, updated 18y ago
Show posts by this member only | Post
#1
|
 
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan 
|
Old thread has reached it's limit. Bye bye old thread hello V3.0.
I'll kick this off with my ex darling. Come come, all Ah Lian owners, mali mali mali show off ure Ah Lian. |
Quote|
|
|
|
|
Jul 2 2007, 11:05 PM
Show posts by this member only | Post
#2
|
 
Senior Member
1,988 posts Joined: Jan 2006 From: 在某个角落...... 
|
Woah......
 Soo Fast for Lian Li League V3.0 already arr  |
|
|
Jul 2 2007, 11:08 PM
Show posts by this member only | Post
#3
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(Doom) hahah that's ur answer ... I'm not sure how good is the cooler on ur card compared to the stock version and ur fan setting so can't judge about it ... problem is it can only be a temp solution....too much dust in my room..in the end itll get worse coz the GC cooler will be clogged with dust but if u put a fan at the side and blow towards it at least the whole card feel cooler a bit .. just small gain but rather than none. .  annd the stock cooler should be the same with other reference coolers... fan setting at 60% QUOTE(Daywalker @ Jul 2 2007, 11:05 PM) Woah...... just goes to show how much lian li users love to spam Soo Fast for Lian Li League V3.0 already arr   This post has been edited by mADmAN: Jul 2 2007, 11:09 PM |
|
|
Jul 2 2007, 11:21 PM
Show posts by this member only | Post
#4
|
Senior Member
847 posts Joined: Jan 2005 
|
cool! V3 already!
can i showoff my darling too? Muahaha... This post has been edited by blessedvillain: Jan 22 2008, 09:01 AM |
|
|
Jul 2 2007, 11:36 PM
Show posts by this member only | Post
#5
|
Junior Member
224 posts Joined: Mar 2005
|
hi guys, juz wondering whether the 120mm case fan which comes with the pcA05 case or the Evercool 120mm Spider Filter Fan is better in term of performance and noise ratio??
like which 1 is better in providing air and which is more quiet??? |
|
|
Jul 2 2007, 11:53 PM
Show posts by this member only | Post
#6
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(Daywalker @ Jul 2 2007, 11:05 PM) Woah...... Dont spam lar. Kakakakaka. Faster pimp ur Lian Li here. Soo Fast for Lian Li League V3.0 already arr |
|
|
|
|
|
Jul 2 2007, 11:58 PM
Show posts by this member only | Post
#7
|
Senior Member
2,239 posts Joined: Jun 2006 From: K.L
|
hey, u dun own a lian li d la.. post for wat.. AKAKAKAK
|
|
|
 Jul 2 2007, 11:58 PM
Show posts by this member only | Post
#8
|
|
Senior Member
1,988 posts Joined: Jan 2006 From: 在某个角落......
|
QUOTE(ianho @ Jul 2 2007, 11:53 PM) Dont spam lar. Kakakakaka. Faster pimp ur Lian Li here. Hehe...... Install everything into my Lian-Li A10, but i need some time to managed all those inside cable, change UV Fan (my friend help me bring from Allngap supercooling fan......) a lot of work to do on my lian-li casing too  |
|
|
Jul 3 2007, 12:19 AM
Show posts by this member only | Post
#9
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
Eh i just joined yesterday in V2, and now V3 already, so fast.. hey btw, a noob question here.. where can i get the 70mm x 70mm fan for the top fan of my casing? if im not mistake 70x70mm is not that common right? normally i only see 80 / 92 / 120mm fans..
|
|
|
Jul 3 2007, 12:21 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
@nicholas_1213
ur using the 007B right??? the top fan is 80mm ler. |
|
|
Jul 3 2007, 12:23 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
oh ya, will post the pic of my 'soft-mod' LianLi PC-007B with akasa paxmate (hehe if only it's considered as a modification too
)Added on July 3, 2007, 12:24 am QUOTE(mADmAN @ Jul 3 2007, 12:21 AM) @nicholas_1213 bro you sure? but i just measured it with my ruler, there's no way i can see it wrongly le.. weird.. 7cm x 7cm le.. at first i also feel weird, but it's really 7cm le.. ur using the 007B right??? the top fan is 80mm ler.  Added on July 3, 2007, 12:26 amsorry.. stupid measurement.. lol.. i go and measure the distance between the screw's hole.. how stupid was i.. thanks madman.. ah feel ashamed  This post has been edited by nicholas_1213: Jul 3 2007, 12:27 AM |
|
|
Jul 3 2007, 12:31 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
good u measured again... im sure coz i have the same case (OEM version though) and i use an 80mm fan on top EDIT: would really like to see how u placed the paxmate in ur case....i happen to have some extra as well as the same case...so wondering how much good it did for u. care to share some review? This post has been edited by mADmAN: Jul 3 2007, 12:33 AM |
|
|
 Jul 3 2007, 12:31 AM
|
Senior Member
3,795 posts Joined: Jan 2003 From: .: Old Klang Road :.
|
I want my AhLian back ...
 |
|
|
|
|
|
Jul 3 2007, 12:34 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
A05 users need some answers from you guys
 Let's say the back of the PSU where the on/off button located exhaust out hot air. It will go out tru the front of the case right? Then right above it there is an intake fan. Would there be much of a problem? |
|
|
Jul 3 2007, 12:41 AM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(ahpaul82 @ Jul 3 2007, 12:31 AM) I want my AhLian back ... LOL! Sry lar bro. I'm still down with the buffalo flu. Blardy hell, today oni starting to feel a bit better. Will return ur darling soonz. |
|
|
Jul 3 2007, 12:43 AM
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
looking forward for V300
|
|
|
Jul 3 2007, 12:43 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
QUOTE(mADmAN @ Jul 3 2007, 12:31 AM) good u measured again...im sure coz i have the same case (OEM version though) and i use an 80mm fan on top EDIT: would really like to see how u placed the paxmate in ur case....i happen to have some extra as well as the same case...so wondering how much good it did for u. care to share some review? yeah the paxmate i only use 1 and a half piece of them, still left 2 and half pieces.. bcos one of my side panel is mesh side panel + 25cm side panel fans, therefore i only paste it at the bottom part, some at the front part and some at the back.. will post some pics later when im free hehe.. was thinking to make it all black, but the nice aluminum will all be covered and it'll be kinda wasted hehe.. but for the bottom part u need to cut some holes so that u can put back the HDD holder nicely  |
|
|
Jul 3 2007, 02:55 AM
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
whoah, v3 already...
here's the pic of my PC-A10S  ... will add more pic... i can't upload, damn slow TM's upload |
|
|
Jul 3 2007, 06:10 AM
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit 
|
QUOTE(nicholas_1213 @ Jul 3 2007, 12:43 AM) Hehe, bcos i straight saw the 4 holes, then i straight measure without thinking lo.. silly me yeah...come on bro....let us see (let me see) ur casing with paxmate yeah the paxmate i only use 1 and a half piece of them, still left 2 and half pieces.. bcos one of my side panel is mesh side panel + 25cm side panel fans, therefore i only paste it at the bottom part, some at the front part and some at the back.. will post some pics later when im free hehe.. was thinking to make it all black, but the nice aluminum will all be covered and it'll be kinda wasted hehe.. but for the bottom part u need to cut some holes so that u can put back the HDD holder nicely  at first,i was shocked reading ur lian li top fan is 70mm |
|
|
Jul 3 2007, 06:34 AM
|
Junior Member
250 posts Joined: Jan 2006
|
QUOTE(ahpaul82 @ Jul 3 2007, 12:31 AM) I want my AhLian back ... ur case is sitting nicely at ian's house.....ehu2euh, It Looks really nice indeed... I especially love d blowholes.. |
|
|
Jul 3 2007, 07:47 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
QUOTE(fo33il @ Jul 3 2007, 06:10 AM) yeah...come on bro....let us see (let me see) ur casing with paxmate Hehe, i was being too stupid to straight go and measure the distance between the screw's hole.. bcos i don't have a 8cm fan right now, so without matching, i saw the top part of the casing, and instinctively, i took the ruler and direct measure the distance between the screw's hole at first,i was shocked reading ur lian li top fan is 70mm Pic already taken, will upload them by tonight.. but actually there's nothing special lo, just cut them into nice shape so that they can fit into the casing nicely, so don't expect too much from the pic hehe |
|
|
Jul 3 2007, 08:54 AM
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(mADmAN @ Jul 3 2007, 12:31 AM) good u measured again...im sure coz i have the same case (OEM version though) and i use an 80mm fan on top EDIT: would really like to see how u placed the paxmate in ur case....i happen to have some extra as well as the same case...so wondering how much good it did for u. care to share some review? Anyway, i noticed its harder to put the PaxMate at the bottom because of the HDD rack. Unlike my previous C5 where the bottom is totally free, the hdd rack of the LL is blocking the PaxMate..LOL.. |
|
|
Jul 3 2007, 12:00 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
|
|
|
Jul 3 2007, 12:06 PM
|
Senior Member
4,504 posts Joined: Jan 2003 From: Setapak 
|
Already V3?
So many got nice casing at here. |
|
|
Jul 3 2007, 01:45 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(mADmAN @ Jul 3 2007, 12:00 PM) @akachester ur HDD cage not removable meh? Anyway, my main intention now is to get the Patent Side Panel Fan and the LL Thermal and Fan Controller. Will take a picture of my casing when i have the time as well... |
|
|
Jul 3 2007, 01:53 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
  current temp...  |
|
|
Jul 3 2007, 02:15 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Bro sniper69, why did you leave the PSU slot cover opened?
|
|
|
Jul 3 2007, 02:24 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(akachester @ Jul 3 2007, 02:15 PM) Bro sniper69, why did you leave the PSU slot cover opened? ooo that... that time, i didn't place the PSU cover yet... , i thought it was already there, but actually it wasn't , pardon me for messy "cacing", i still can't figure out on how-to manage the cable apart from doing the sleeving job... |
|
|
Jul 3 2007, 02:31 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sniper69 @ Jul 3 2007, 02:24 PM) ooo that... that time, i didn't place the PSU cover yet... LOL..I am sure you can do proper cable management easily with this casing. Anyway, you getting the EX-33 for the casing as well?How did you configure the fans of your casing?, i thought it was already there, but actually it wasn't , pardon me for messy "cacing", i still can't figure out on how-to manage the cable apart from doing the sleeving job... |
|
|
Jul 3 2007, 03:19 PM
|
Senior Member
1,995 posts Joined: May 2005
|
is it the camera problem or i see a lot of dust collecting on ur HR-01.............
|
|
|
Jul 3 2007, 03:29 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(akachester @ Jul 3 2007, 02:31 PM) LOL..I am sure you can do proper cable management easily with this casing. Anyway, you getting the EX-33 for the casing as well?How did you configure the fans of your casing?  , in dilemma, either EX-33 or mod my ROM cover plate as uncle ianho suggested...  , the fan? well, both frontal as intake, top hole intake too, rear case exhaust as well as my PSU...QUOTE(LExus65 @ Jul 3 2007, 03:19 PM) is it the camera problem or i see a lot of dust collecting on ur HR-01............. it's dust, actually, i've no time to clean it up, the on top of that, i bought it second hand  |
|
|
Jul 3 2007, 04:11 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sniper69 @ Jul 3 2007, 03:29 PM) , in dilemma, either EX-33 or mod my ROM cover plate as uncle ianho suggested... , the fan? well, both frontal as intake, top hole intake too, rear case exhaust as well as my PSU...it's dust, actually, i've no time to clean it up, the on top of that, i bought it second hand Anyway, EX-33 looks beautiful to me. Was planning to get it in the first place but its too expensive for me and well, i dont feel it will look nice on my PC-7B. For now, i guess single 12cm intake is enough for the front.. |
|
|
Jul 3 2007, 06:54 PM
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(akachester @ Jul 3 2007, 01:45 PM) Yea, its removable. But i am reluctant to cut the PaxMate which i needed to do so if i wanted to place it at the bottom of the casing.. your PC-7YCF removable Anyway, my main intention now is to get the Patent Side Panel Fan and the LL Thermal and Fan Controller. Will take a picture of my casing when i have the time as well... why mine not |
|
|
Jul 3 2007, 06:59 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
@E-J@1
if ur HDD cage is the same then it should still be removable oso....just need to remove 2 screws. |
|
|
Jul 3 2007, 07:05 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(akachester @ Jul 3 2007, 04:11 PM) LOL..Spend some time cleaning it and show off the bling bling HSF mar..Its a beauty. well definitely will do the cleaning job... Anyway, EX-33 looks beautiful to me. Was planning to get it in the first place but its too expensive for me and well, i dont feel it will look nice on my PC-7B. For now, i guess single 12cm intake is enough for the front..  , ok... apart using detergent, is there any other cleaning detergent i could use? FYI, normally i use dish washer to clean those HSF like i did on ThermalTake BigTyphoon, Hyper 6+, XP-90 |
|
|
Jul 3 2007, 07:15 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(mADmAN @ Jul 3 2007, 06:59 PM) @E-J@1 2 screws only? what about the other 2? they are riveted if ur HDD cage is the same then it should still be removable oso....just need to remove 2 screws.  still can be remove ka? never bother to try since saw one side screwed while another being riveted to the case guess need to check again  |
|
|
Jul 3 2007, 07:18 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
nono...the side at the intake fan is not riveted...its just slide out.... the 2 screws is on the mobo side...u take a good peek again then ull get what i mean...
|
|
|
Jul 3 2007, 07:38 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(mADmAN @ Jul 3 2007, 07:18 PM) nono...the side at the intake fan is not riveted...its just slide out.... the 2 screws is on the mobo side...u take a good peek again then ull get what i mean... Yes, its only screwed at one side. Two screws. The other side is slide into a metal plate. Its removable and if mod abit, it can also face sideways.. |
|
|
Jul 3 2007, 07:40 PM
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(sniper69 @ Jul 3 2007, 07:05 PM) well definitely will do the cleaning job... Banyak bunyi la ko., ok... apart using detergent, is there any other cleaning detergent i could use? FYI, normally i use dish washer to clean those HSF like i did on ThermalTake BigTyphoon, Hyper 6+, XP-90 Project BTX bila nak start? |
|
|
Jul 3 2007, 07:41 PM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
Hi, pics uploaded as promised.. again, sorry for the low quality of pic as it's taken by my webcam.. i don't have a digital camera
My lovely lian-li casing  (with it's little bro coolermaster Xcraft)    Some close-up for the HDD cage:   For the back part (with the 2 screws), before pasting the paxmate, gorek 2 holes 1st by using screwdriver or any sharp object so that it is easier to screw it later. For the front part (a sliding metal hold by the holder), i cut a line as a opener, so that the metal can go through the paxmate and being held by the holder. the hard part is pasting the paxmate to the case.. really have to be patient hehe Another few pics for other parts of casing with paxmate (behind and front)     For the front and back part, just cut the size and shape according to the flat surface (as shown in the pic). |
|
|
Jul 3 2007, 07:50 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
@ nicholas_1213
why don't u replace the pics with direct link, really hate to open all the pics in a new window just put the big pics of it like other forumer did, no need to open in a new window QUOTE(mADmAN @ Jul 3 2007, 07:18 PM) nono...the side at the intake fan is not riveted...its just slide out.... the 2 screws is on the mobo side...u take a good peek again then ull get what i mean... QUOTE(akachester @ Jul 3 2007, 07:38 PM) Yes, its only screwed at one side. Two screws. The other side is slide into a metal plate. Its removable and if mod abit, it can also face sideways.. ya ya already checked it out it is removable, thought it wasn't due to the riveted side thanx for the clarification This post has been edited by E-J@1: Jul 3 2007, 07:52 PM |
|
|
Jul 3 2007, 08:12 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
i think i'm going to same thing with PC-A10 la... FYI, the HDD cage is rivetted to it's base, i think, un-rivetting them and rescrew or re-riveting might possible? (thinking to rotate to the other side (hiding those connector purpose)
|
|
|
Jul 3 2007, 11:17 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
@ nicholas_1213
Nicely done with the PaxMate there. Will check out what i can do with my PaxMate for now..LOL.. @sniper69 I tried to do that with my PC-7B but after some checking, its not doable on original PC-7. Need some modifications...I do love to have a sideway HDD rack for easier cable management. |
|
|
Jul 4 2007, 12:34 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(akachester @ Jul 3 2007, 11:17 PM) @sniper69 yeah i did the same, and from the research I tried to do that with my PC-7B but after some checking, its not doable on original PC-7. Need some modifications...I do love to have a sideway HDD rack for easier cable management. , i have to do some quite a lot of work, once the HDD cage turned, i figured, another problem arise, how will the SATA power & data cable will route to?  , need to study again... |
|
|
Jul 4 2007, 12:35 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
QUOTE(akachester @ Jul 3 2007, 11:17 PM) @ nicholas_1213 hehe, thanks for the compliment Nicely done with the PaxMate there. Will check out what i can do with my PaxMate for now..LOL.. it's actually an easy job, but need a lil bit of patience |
|
|
Jul 4 2007, 01:27 AM
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
nice case n padding... PaxMate its called huh.. whr to buy? how much huh?
|
|
|
Jul 4 2007, 02:03 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(james2306 @ Jul 4 2007, 01:27 AM) nice case n padding... PaxMate its called huh.. whr to buy? how much huh? The Akasa Paxmatecan check with rlhh and see if he still has stocks for it or not. he was doing some stock clearance a short while while back and he was selling it for damn cheap. |
|
|
Jul 4 2007, 07:00 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
Yalo, according to him, original price is around RM70++ (forgot already), but i got my unit for RM25 hehe.. but for it's ori purpose which is to reduce the noise produced by the fans, i don't really test it as in like a 'before and after', my purpose is just to enhance the look only hehe..
|
|
|
Jul 4 2007, 09:08 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sniper69 @ Jul 4 2007, 12:34 AM) yeah i did the same, and from the research Well, yea, that might be a problem but at least it will be better than my current setup. I tried both ways on my current setup :, i have to do some quite a lot of work, once the HDD cage turned, i figured, another problem arise, how will the SATA power & data cable will route to? , need to study again... Sata cables facing outsite (mobo area) and Sata cables facing inside (front intake fan area) and both setup doesnt seem too good. Its still kinda hard to manage it which makes me wonder how can i shift the HDD tray sideways. QUOTE(nicholas_1213 @ Jul 4 2007, 12:35 AM) hehe, thanks for the compliment Well, at least its not easy for me. I tried very hard last time to see how can i do it but i turned lazy at the end..LOL..Its hard to match the HDD tray screw holes to the PaxMate.Besides, i think i need to cut the other end as well (the part where the other leg of the HDD tray slides in)..In the end, i gave up. Any tips on how to do that? it's actually an easy job, but need a lil bit of patience QUOTE(james2306 @ Jul 4 2007, 01:27 AM) nice case n padding... PaxMate its called huh.. whr to buy? how much huh? LOL..Its from Akasa. As said before by other people, its available at Garage Sales last time. Bought mine for RM25. Very good indeed. Lucky for me cause its sold out in matter of hours... |
|
|
Jul 4 2007, 02:58 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
U fellas who installed the paxmate r gonna curse n swear when the time comes to remove it. I tell u, u will pengsan. Even with my proper removal methods is still damn difficult.
|
|
|
Jul 4 2007, 03:11 PM
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
anyone know is there any silver color DVD-writer in the market? I want to find one that fit my lian li case.
|
|
|
Jul 4 2007, 03:26 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(ianho @ Jul 4 2007, 02:58 PM) U fellas who installed the paxmate r gonna curse n swear when the time comes to remove it. I tell u, u will pengsan. Even with my proper removal methods is still damn difficult. true....the damn thing really sticks. my old HEC i didnt paste it all the way...i only removed part of the sticker backing where necessary...most of them is still on QUOTE(jasonkwk @ Jul 4 2007, 03:11 PM) anyone know is there any silver color DVD-writer in the market? I want to find one that fit my lian li case. not that i know of...but u can buy the aluminium cdrom bezel from ATE. |
|
|
Jul 4 2007, 04:04 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(jasonkwk @ Jul 4 2007, 03:11 PM) anyone know is there any silver color DVD-writer in the market? I want to find one that fit my lian li case. Buy the Lian Li drive bezel. Thats the best looking bezel ever. |
|
|
Jul 4 2007, 04:18 PM
|
|
Senior Member
4,504 posts Joined: Jan 2003 From: Setapak
|
QUOTE(jasonkwk @ Jul 4 2007, 03:11 PM) anyone know is there any silver color DVD-writer in the market? I want to find one that fit my lian li case. Lite-On LH-18A1P AllWrite DVD-Writer but they're look so ghey...  Agree what ianho said, buy the Lian-Li bezel... This post has been edited by ikan_semilang: Jul 4 2007, 04:20 PM |
|
|
Jul 4 2007, 05:13 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(ianho @ Jul 4 2007, 02:58 PM) U fellas who installed the paxmate r gonna curse n swear when the time comes to remove it. I tell u, u will pengsan. Even with my proper removal methods is still damn difficult. LOL..Luckily i did not peel off the back when tried to install the PaxMate. Another reason for me not using the PaxMate anymore in my LL (Transfered to my C5) is because i am reluctant to cover off those beautiful aluminum internals of the casing..LOL...QUOTE(ianho @ Jul 4 2007, 04:04 PM) Buy the Lian Li drive bezel. Thats the best looking bezel ever. Agree. Not that expensive and makes your casing way way better looking.. |
|
|
Jul 4 2007, 07:36 PM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
QUOTE(akachester @ Jul 4 2007, 09:08 AM) Well, at least its not easy for me. I tried very hard last time to see how can i do it but i turned lazy at the end..LOL..Its hard to match the HDD tray screw holes to the PaxMate.Besides, i think i need to cut the other end as well (the part where the other leg of the HDD tray slides in)..In the end, i gave up. Any tips on how to do that? for the slide in part, just cut a line as a opening.. this part is a bit tricky a bit, as you've put your hdd cage's leg through the opening, slide it into the holder 1st before paste and press it firmly.. sorry for my poor description QUOTE(ianho @ Jul 4 2007, 02:58 PM) U fellas who installed the paxmate r gonna curse n swear when the time comes to remove it. I tell u, u will pengsan. Even with my proper removal methods is still damn difficult. hehe, if really nextime change casing, then sell the paxmate together with it lo.. bcos i still have a lot of paxmate.. for the remaining paxmate i think i still can use it on other 2 more casings hehe..QUOTE(mADmAN @ Jul 4 2007, 03:26 PM) not that i know of...but u can buy the aluminium cdrom bezel from ATE. |
|
|
Jul 4 2007, 08:17 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(nicholas_1213 @ Jul 4 2007, 07:36 PM) yeah, im thinking to buy that also.. the dvd-rom really spoil the looks le.. heh heh heh...poison u abit...  before  AFTER » Click to show Spoiler - click again to hide... « |
|
|
Jul 4 2007, 09:03 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(mADmAN @ Jul 4 2007, 08:17 PM) Madman, apsal colour bezel tu tak masuk dengan colour casing aa? |
|
|
Jul 4 2007, 09:51 PM
|
All Stars
12,851 posts Joined: May 2005 From: Puchong, Selangor
|
@Madman
Your casing is dark green, not black. |
|
|
Jul 4 2007, 10:03 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(WebWalker @ Jul 4 2007, 09:51 PM) @Madman ya bro madman...urs look like green colorYour casing is dark green, not black. mine is black.. |
|
|
Jul 4 2007, 10:08 PM
|
|
Junior Member
288 posts Joined: Jun 2007
|
Is the LL A05 suitable to be used with a non-modular PSU? Seems to be small and restrict cable management.
|
|
|
Jul 4 2007, 10:08 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(sHawTY @ Jul 4 2007, 09:03 PM) Madman, apsal colour bezel tu tak masuk dengan colour casing aa? QUOTE(WebWalker @ Jul 4 2007, 09:51 PM) @Madman Your casing is dark green, not black. QUOTE(fo33il @ Jul 4 2007, 10:03 PM) ya bro madman...urs look like green color mine is black.. its the camera ler... my camera is the lowest end sony... and lighting not that good... so comes out like that lor trust me its black. This post has been edited by mADmAN: Jul 4 2007, 10:11 PM |
|
|
Jul 4 2007, 10:12 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
Even with black color, the DVD brezel from lian li looks a bit faded too.
|
|
|
Jul 4 2007, 10:15 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
aiyoooooooo....whatever discrepancy u see in the color...faded..or different color la etc etc etc...its all because of the camera...
|
|
|
Jul 4 2007, 10:27 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
Hahahahahha, madman got a special edition. The 1 n only green anodised alu case.
|
|
|
Jul 4 2007, 11:46 PM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
Hemm, anyhow the aluminum dvd bezel looks really nice.. may i know how much you bought it le? bought it at ATE?
|
|
|
Jul 4 2007, 11:58 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(nicholas_1213 @ Jul 4 2007, 11:46 PM) Hemm, anyhow the aluminum dvd bezel looks really nice.. may i know how much you bought it le? bought it at ATE? Ya it's from ATE. about rm35 |
|
|
Jul 5 2007, 12:08 AM
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(Polar_012 @ Jul 4 2007, 10:08 PM) Is the LL A05 suitable to be used with a non-modular PSU? Seems to be small and restrict cable management. No problem dude .. even a non modular high end power supply could fit in without sweat ... |
|
|
Jul 5 2007, 12:11 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(Doom @ Jul 5 2007, 12:08 AM) No problem dude .. even a non modular high end power supply could fit in without sweat ... Where did you route the power cables from your PSU to? Thanks. |
|
|
Jul 5 2007, 01:08 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
Madman's dark green ok what... not bad
, well those ROM bezel can get at RM35 available at ATE @LowYat Plaza |
|
|
Jul 5 2007, 01:13 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(ianho @ Jul 4 2007, 10:27 PM) Hahahahahha, madman got a special edition. The 1 n only green anodised alu case. QUOTE(sniper69 @ Jul 5 2007, 01:08 AM) Madman's dark green ok what... not bad , well those ROM bezel can get at RM35 available at ATE @LowYat Plaza u guys do realize that it could also be due to the reflection of the table and the camera flash right? |
|
|
Jul 5 2007, 01:23 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(mADmAN @ Jul 5 2007, 01:13 AM) u guys do realize that it could also be due to the reflection of the table and the camera flash right? » Click to show Spoiler - click again to hide... « but seriously if this because of the reflection or any sort, why the bezel still black , anyhow... i do like the Dark Green though... i even wish the bezel also dark green... too bad, it's because of the reflection/bad lightning... ...poor you madman, everyone thought that indeed dark green |
|
|
Jul 5 2007, 01:31 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(sniper69 @ Jul 5 2007, 01:23 AM) poor you madman, everyone thought that indeed dark green THATS WHY LAAAAAAAAAAAAAAA!!!!! basket....me susah susah bring the case back from singapore... end up like this... its black la oi!! BLLLLLLLAAAAAAAAAAAAAAAAACCCCCCCCCCKKKKKKKKKK!!!!!!!!!! sigh..now im really going mad.... |
|
|
Jul 5 2007, 01:35 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Weird ... I had the same case before but it looks black from the photo taken ..
It was taken with a 5mp casio dc ..... |
|
|
Jul 5 2007, 02:53 AM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(Doom @ Jul 5 2007, 01:35 AM) Weird ... I had the same case before but it looks black from the photo taken .. U use 5mp cam sure lar. madman using 640x480 cam from 10 years back. KakakakakaIt was taken with a 5mp casio dc ..... |
|
|
Jul 5 2007, 07:02 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
Hehe, this funny arguing still continue hehe.. and mADmAN will really go MAD hehe..
Anyway thanks for the info, not as expensive as i thought hehe.. will get one or two as i really cant stand the dvd-rom ori bezel  |
|
|
Jul 5 2007, 08:50 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(nicholas_1213 @ Jul 5 2007, 07:02 AM) Hehe, this funny arguing still continue hehe.. and mADmAN will really go MAD hehe.. LOL...I wanna see mADmAN going MAD. LOL... Anyway thanks for the info, not as expensive as i thought hehe.. will get one or two as i really cant stand the dvd-rom ori bezel Well, just a piece of advice, make sure that your DVD Rom is compatible with the bezel. Not sure whether there is any compatibility issues with certain drive or not though.. This post has been edited by akachester: Jul 5 2007, 08:50 AM |
|
|
Jul 5 2007, 09:17 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
alright mADmAN...it's black...dun care wat the others say...stop the MADNESS!
Anyhow guys... Since I bought my Lian Li case for a few months d, I've 1 problem....a big one!!  ---> Everytime somebody new come to my room and notice the casing with the name Lian Li, they will start teasing the name! Example... 1. "Eh...new casing ah? From China? " 2. "Lian Li?! yikes, wat kind of name is it? From China?" <--- a freaking chun girl ask this! .. there goes my self esteem3. "Lian Li? From China? Eh, have u checked out Cooler Master casing?" 4. "I dun like the name Lian Li" <--- my gf, said this..infront of ATE, infront of the guy packing my Lian Li... 5. "Lian Li....i see i see...mine is Cooler Master" Not sure whether u guys have encountered such situation like mine or not..but luckily not everybody says that, only a handful... This post has been edited by blessedvillain: Jul 5 2007, 09:36 AM |
|
|
Jul 5 2007, 09:21 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(blessedvillain @ Jul 5 2007, 09:17 AM) alright mADmAN...it's black...dun care wat the others say...stop the MADNESS! LOL..Who cares what other people say when we all know Lian Li are good casings. And they doesnt come cheap as well. Give them a big look and reply : Anyhow guys... Since I bought my Lian Li case for a few months d, I've 1 problem....a big one!! ---> Everytime somebody new come to my room and notice the casing with the name Lian Li, they will start teasing the name! Example... 1. "Eh...new casing ah? From China? " 2. "Lian Li?! yikes, wat kind of name is it? From China?" <--- a freaking chun girl ask this! .. there goes my self esteem3. "Lian Li? From China? Eh, have u checked out Cooler Master casing?" 4. "I dun like the name Lian Li" <--- my gf, said this..infront of ATE, infront of the guy packing my Lian Li... 5. "Lian Li....i see i see...mine is Cooler Master" Not sure whether u guys have encounter such situation like mine or not..but luckily not everybody says that, only a handful... Eh..CoolerMaster ar  ?LOL.. |
|
|
Jul 5 2007, 09:33 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
hahaha....ya..ya..that's wat i've been doing, convince those who come across Lian Li for the first time tat it's a good casing. I remember 1 time i told a guy tat lian li produces all aluminium casing, and guess wat the guy say --> "aluminium? can make sardin d next time" ....
This post has been edited by blessedvillain: Jul 5 2007, 09:35 AM |
|
|
Jul 5 2007, 09:45 AM
|
Junior Member
360 posts Joined: Dec 2005 From: Ampang / Kuantan
|
bro ur in another league already, you should tell them not to compare a Full Alu casing with steel casing, you should be be proud as an owner of LIAN LI and for sure your Lian Li can kick those steel casing, cooler master,raidmax,pwerlogic etc etc to kingdom come.
 This post has been edited by beast921: Jul 5 2007, 09:46 AM |
|
|
Jul 5 2007, 10:23 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(beast921 @ Jul 5 2007, 09:45 AM) bro ur in another league already, you should tell them not to compare a Full Alu casing with steel casing, you should be be proud as an owner of LIAN LI and for sure your Lian Li can kick those steel casing, cooler master,raidmax,pwerlogic etc etc to kingdom come. Actually i dun really care bout wat they think....i sayang my Ah Lian... One of these days i sure get another round bashing from my gf for spending the weekend wiping dust off the case instead of going out with her for shopping ... This post has been edited by blessedvillain: Jul 5 2007, 12:28 PM |
|
|
Jul 5 2007, 10:58 AM
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(blessedvillain @ Jul 5 2007, 09:17 AM) alright mADmAN...it's black...dun care wat the others say...stop the MADNESS! maybe u can tell them like this : "u noobs!! go to do some research before u said so, do u know how popular Lian Li casing at other country? if u know nothing bout this, stop talking shxt....." Anyhow guys... Since I bought my Lian Li case for a few months d, I've 1 problem....a big one!! ---> Everytime somebody new come to my room and notice the casing with the name Lian Li, they will start teasing the name! Example... 1. "Eh...new casing ah? From China? " 2. "Lian Li?! yikes, wat kind of name is it? From China?" <--- a freaking chun girl ask this! .. there goes my self esteem3. "Lian Li? From China? Eh, have u checked out Cooler Master casing?" 4. "I dun like the name Lian Li" <--- my gf, said this..infront of ATE, infront of the guy packing my Lian Li... 5. "Lian Li....i see i see...mine is Cooler Master" Not sure whether u guys have encountered such situation like mine or not..but luckily not everybody says that, only a handful... joking joking... well, i'm still very enjoying my LL case, but too bad, there got too much dust flowing in to my room, i need to clean my casing every week.... |
|
|
Jul 5 2007, 11:13 AM
|
Junior Member
391 posts Joined: Jul 2005 From: Bandar Baru Bangi/ Jalan Klang Lama
|
last time join this lian-li league with PC-60 Plus, now change my casing already to v300, but unfortunately can't fit lian-li standard bezel...how sad
 This post has been edited by katunX: Jul 5 2007, 11:14 AM |
|
|
Jul 5 2007, 11:31 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(RokXIII @ Jul 5 2007, 10:58 AM) maybe u can tell them like this : "u noobs!! go to do some research before u said so, do u know how popular Lian Li casing at other country? if u know nothing bout this, stop talking shxt....." Most of the comments are from my female friends....cant say tat to them... joking joking... |
|
|
Jul 5 2007, 11:43 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(akachester @ Jul 5 2007, 09:21 AM) LOL..Who cares what other people say when we all know Lian Li are good casings. And they doesnt come cheap as well. Give them a big look and reply : i did... Eh..CoolerMaster ar ?LOL.. Friend 1 : Lian Li? was that a brand? Friend 2 : Aluminium? better steel!!! (i was like... )Friend 3 : how much you bought it myself : (assuming that he knew about Lian Li, i just said) "tujuh"... Friend 3 : 70? that's cheap myself : nope, it's 70 for the 2x ROM bezel , and 700 for the case... and it's more expensive than your phoneeven my dad knew about Lian Li (not that he knew the brand), by looking its built quality and sleek design, instantly my dad guess... it's RM500 +, well at least not that RM50 |
|
|
Jul 5 2007, 12:04 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
hahaha.... my "smarter" male friends, they kinda reserve their comments and dig up more info bout lian li before commenting bout it...some of them know it's an "uncommon" casing and lately started asking bout it whenever we geek talk bout computers
|
|
|
Jul 5 2007, 12:30 PM
|
Senior Member
3,345 posts Joined: Jan 2003
|
"Lian Li is still ok la, but Coolermaster is much more expensive (without mentioning any specific model)".
That was like 3 years ago when the cheapest lian-li is RM300 above. If the people have no knowledge about the brand, then its not their fault. But the worst thing if they assuming they know about it and came out with a false statement. |
|
|
Jul 5 2007, 02:45 PM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
anyone have to picture of the aluminum DVD writer bezel? want to see first before buying it
|
|
|
Jul 5 2007, 02:50 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(jasonkwk @ Jul 5 2007, 02:45 PM) anyone have to picture of the aluminum DVD writer bezel? want to see first before buying it  or you can check out the actual bezel installed on the case on the 1st few pages... |
|
|
Jul 5 2007, 02:53 PM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
QUOTE(blessedvillain @ Jul 5 2007, 02:50 PM) or you can check out the actual bezel installed on the case on the 1st few pages... is it compatible with most dvd writer in the market? |
|
|
Jul 5 2007, 02:54 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(jasonkwk @ Jul 5 2007, 02:53 PM) thanks If you're going to use on a Lian-Li casing, yes it should be compatible with any DVD Writer on the market. is it compatible with most dvd writer in the market? |
|
|
Jul 5 2007, 02:58 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(sHawTY @ Jul 5 2007, 02:54 PM) If you're going to use on a Lian-Li casing, yes it should be compatible with any DVD Writer on the market. no its not. u have to use the normal dvdrom drive...the type where the tray comes out wan...u cant use it with those slot in dvdroms like the pioneers... so its NOT compatible with ANY writer on the market. theres a few that cant be used |
|
|
Jul 5 2007, 03:05 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(mADmAN @ Jul 5 2007, 02:58 PM) no its not. u have to use the normal dvdrom drive...the type where the tray comes out wan... Kan aku tulis "It should be compatible with any DVDROM Drive tu." u cant use it with those slot in dvdroms like the pioneers... so its NOT compatible with ANY writer on the market. theres a few that cant be used That doesn't mean that it will fit all. Atau orang tak faham apa yang aku nak sampaikan? Nevermind, tak penting pun. |
|
|
Jul 5 2007, 03:07 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
tau la it should.....saja je gatal nak clarify kan....
|
|
|
Jul 5 2007, 03:54 PM
|
|
Senior Member
4,504 posts Joined: Jan 2003 From: Setapak
|
Err....where i can get this logo?
 This post has been edited by ikan_semilang: Jul 5 2007, 03:56 PM |
|
|
Jul 5 2007, 03:59 PM
|
|
Junior Member
391 posts Joined: Jul 2005 From: Bandar Baru Bangi/ Jalan Klang Lama
|
i wanna ask something, is it possible to put third party cooler for v300 casing? Anyone know about this?
|
|
|
Jul 5 2007, 03:59 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(ikan_semilang @ Jul 5 2007, 03:54 PM) Err....where i can get this logo? Buy a lian li case? » Click to show Spoiler - click again to hide... « ya, i wanna know too if there's a stick on Lian Li logo for sale. |
|
|
Jul 5 2007, 04:02 PM
|
|
Senior Member
4,504 posts Joined: Jan 2003 From: Setapak
|
QUOTE(blessedvillain @ Jul 5 2007, 03:59 PM) Buy a lian li case? Already buy but missing in action. Now want to find it back very hard... ya, i wanna know too if there's a stick on Lian Li logo for sale. |
|
|
Jul 5 2007, 04:36 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
lian li name was spoiled by singaporean ah lian'............ ppl tot lian li, ah lian's new cousin or something hehe..........
but seriously i was thinking about that too......until i saw the real thing hehe.........but very very subjective.......and i found 1 thing most lady dun like it ......wander |
|
|
Jul 5 2007, 05:03 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
true...even my GF wasnt too impressed with the A10 and G70 when i looked at them few weeks back...she was like..."its so big...y u wan so big?"
told her the prices and she was like "what???????!!!?!?!?!?" |
|
|
Jul 5 2007, 05:07 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(LExus65 @ Jul 5 2007, 04:36 PM) lian li name was spoiled by singaporean ah lian'............ ppl tot lian li, ah lian's new cousin or something hehe.......... Totally agree with that!! the ladies do have something against lian li....as for my example earlier...i've negative comments from my gf, my sexy assignment partner, my female housemates... but seriously i was thinking about that too......until i saw the real thing hehe.........but very very subjective.......and i found 1 thing most lady dun like it ......wander Maybe lian li cases are very too rigid,classic and professional looking for the ladies but i dun think that's the reason, i think it's the name they wan tease about!! |
|
|
Jul 5 2007, 05:08 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
i remembered i said to my gf, i dated with a girl named Lian Li, she thought that she was real person...
, until i brought her back and see the beauty of Lian Li |
|
|
Jul 5 2007, 05:16 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sniper69 @ Jul 5 2007, 05:08 PM) i remembered i said to my gf, i dated with a girl named Lian Li, she thought that she was real person... LOL..You must have scared her to death. She would be like "damn, sniper69 likes AH LIANN!!", until i brought her back and see the beauty of Lian Li |
|
|
Jul 5 2007, 05:20 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(sniper69 @ Jul 5 2007, 05:08 PM) i remembered i said to my gf, i dated with a girl named Lian Li, she thought that she was real person... wah..if i say like tat, i'll definitely get bashing and ear piercing shouting from my gf which is all too cute when she does tat. , until i brought her back and see the beauty of Lian Li geez...i wonder wat Lian Li means in chinese...i do read a bit of chinese character, but i cant make any sense out of it. 1. Lian ->? (no sure wat it means) 2. Li -> strength or power, if i'm not mistaken. This post has been edited by blessedvillain: Jul 5 2007, 05:21 PM |
|
|
Jul 5 2007, 05:23 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
hehe lian li GF, ........sniper naughty ........what do u do with ur casing......
lian - li name is actually very simple in chinese, lian - union, li - strength or power....... |
|
|
Jul 5 2007, 05:35 PM
|
|
All Stars
12,851 posts Joined: May 2005 From: Puchong, Selangor
|
Lian Li = 聯力
It mean "Joint Force". |
|
|
Jul 5 2007, 06:53 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(katunX @ Jul 5 2007, 03:59 PM) i wanna ask something, is it possible to put third party cooler for v300 casing? Anyone know about this? possible, but not the high-end tower type u gotta find a cooler that it's height doesn't exceed 8.5cm |
|
|
Jul 5 2007, 07:38 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(mADmAN @ Jul 5 2007, 05:03 PM) true...even my GF wasnt too impressed with the A10 and G70 when i looked at them few weeks back...she was like..."its so big...y u wan so big?" Nahh, i got worse. told her the prices and she was like "what???????!!!?!?!?!?" When i told my GF the price of the Lian-Li V2000 casing that i've always dreamt, she told me, that piece of steel cost that much? This post has been edited by sHawTY: Jul 5 2007, 07:38 PM |
|
|
Jul 5 2007, 07:46 PM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
Hehe, so funny when i saw those comments from you guys' friends.. but i bet my friends will have this kind of reaction too.. but i'll ask them to wear their spec and have a closer look at the aluminum finishing, and then tell them off the price, then maybe they will keep their mouth shut hehe..
yay, i'm going to get myself a dvd-rom bezel this weekend |
|
|
Jul 5 2007, 08:03 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
Hahaha...watever u guys do, pls dun showoff your lian li to any of the ladies, they will have devastating reaction!! you can parade any of your hardwares like PDA,Cars etc.... but not lian li...
to guys, no problem... girls? NO! |
|
|
Jul 5 2007, 08:38 PM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
QUOTE(blessedvillain @ Jul 5 2007, 08:03 PM) Hahaha...watever u guys do, pls dun showoff your lian li to any of the ladies, they will have devastating reaction!! you can parade any of your hardwares like PDA,Cars etc.... but not lian li... Hehe, but my gf said that the casing is nice when i show her through webcam (she is in adelaide now).. guess what? it is because she saw the blue colour fan inside my casing, not because of the aluminum to guys, no problem... girls? NO! (i think webcam cant show it clearly also).. and one thing, i didn't mention to her that the brand is lian-li . Hehe, if want to become a 'girl-magnet' casing, just mod it and become bling bling casing, with cool side panel and uv light inside |
|
|
Jul 5 2007, 08:50 PM
|
Senior Member
2,597 posts Joined: Mar 2005 From: Kuala Lumpur
|
QUOTE(sHawTY @ Jul 5 2007, 07:38 PM) Nahh, i got worse. tell her alu price is high When i told my GF the price of the Lian-Li V2000 casing that i've always dreamt, she told me, that piece of steel cost that much? somemore v2000 is full tower, hence more alu is being used  |
|
|
Jul 5 2007, 09:26 PM
|
All Stars
10,479 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(blessedvillain @ Jul 5 2007, 08:03 PM) Hahaha...watever u guys do, pls dun showoff your lian li to any of the ladies, they will have devastating reaction!! you can parade any of your hardwares like PDA,Cars etc.... but not lian li... my sister says lianli casing very elegant. she likes it very much. she just says that the price is quite high and not worth it. a centurion5 is the maximum that she would pay for a casing.to guys, no problem... girls? NO! |
|
|
Jul 5 2007, 10:56 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hhahha .. we can't care too much about their comment regarding Lian Li and their product line...
As long as we enjoyed it ... we are the one that happy about it .... I don't care whether my gf like it or not ... but most of time ... she would say hmm no bad ... girl mah .... |
|
|
Jul 5 2007, 11:33 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Guys, if anyone of you is going to ATE soon, please do help me check out whether the BS02 fan is on sale or not ok. I went to ATE last week and they are out of stock for BS02..
|
|
|
Jul 5 2007, 11:49 PM
|
|
All Stars
10,479 posts Joined: Jan 2003 From: Sarawak
|
also...plz ask ATE whether they sell the front intake filter for PC-G7....the one that came with PC-7+ and PC-60+
|
|
|
Jul 5 2007, 11:51 PM
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
QUOTE(sHawTY @ Jul 5 2007, 07:38 PM) Nahh, i got worse. lolz.... So what is her reaction when u tell her the price? When u going to get it? Really nice casing... Poison! Poison! When i told my GF the price of the Lian-Li V2000 casing that i've always dreamt, she told me, that piece of steel cost that much? |
|
|
Jul 6 2007, 12:16 AM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(irangan @ Jul 5 2007, 11:51 PM) lolz.... So what is her reaction when u tell her the price? When u going to get it? Really nice casing... Poison! Poison! That's what she says lar: "That piece of steel cost that much?" |
|
|
Jul 6 2007, 12:28 AM
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
tak kenal Lian Li maka tak cinta.
thats the word |
|
|
Jul 6 2007, 01:16 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
QUOTE(akachester @ Jul 5 2007, 11:33 PM) Guys, if anyone of you is going to ATE soon, please do help me check out whether the BS02 fan is on sale or not ok. I went to ATE last week and they are out of stock for BS02.. QUOTE(Skylinestar @ Jul 5 2007, 11:49 PM) also...plz ask ATE whether they sell the front intake filter for PC-G7....the one that came with PC-7+ and PC-60+ Hi, im going there this coming sunday to get the dvd-rom bezel.. i can help u guys to ask about those items just ask the availability and the price right? |
|
|
Jul 6 2007, 01:52 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(nicholas_1213 @ Jul 6 2007, 01:16 AM) Hi, im going there this coming sunday to get the dvd-rom bezel.. i can help u guys to ask about those items yup, price & availability --> make sure the availability either ready stock just ask the availability and the price right? or stock out or ATE doesn't bring it in |
|
|
Jul 6 2007, 03:18 AM
|
Senior Member
4,237 posts Joined: Sep 2006
|
<object width="300" height="80"><param name="movie" value="http://media.imeem.com/m/TOnbFmVnQr"></param><param name="wmode" value="transparent"></param><embed src="http://media.imeem.com/m/TOnbFmVnQr" type="application/x-shockwave-flash" width="300" height="80" wmode="transparent"></embed></object>
|
|
|
Jul 6 2007, 07:03 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
QUOTE(E-J@1 @ Jul 6 2007, 01:52 AM) yup, price & availability --> make sure the availability either ready stock Hehe bro, which product do u want to get info? or same with above 2? or stock out or ATE doesn't bring it in QUOTE(johnkor @ Jul 6 2007, 03:18 AM) <object width="300" height="80"><param name="movie" value="http://media.imeem.com/m/TOnbFmVnQr"></param><param name="wmode" value="transparent"></param><embed src="http://media.imeem.com/m/TOnbFmVnQr" type="application/x-shockwave-flash" width="300" height="80" wmode="transparent"></embed></object> Hemm.. what is this ? |
|
|
Jul 6 2007, 08:34 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Jul 6 2007, 12:16 AM) That's what she says lar: "That piece of steel cost that much?" Steel pulak...Tell ATE boss that then he will faint..LOL.. QUOTE(nicholas_1213 @ Jul 6 2007, 01:16 AM) Hi, im going there this coming sunday to get the dvd-rom bezel.. i can help u guys to ask about those items Yea, do help me check out the availability. I kinda know the price already cause i ask them that but they told me no stock.. just ask the availability and the price right? |
|
|
Jul 6 2007, 08:50 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hahha if u want today also u could get the info from me coz I would be going ...
hahahaha ... Bezel and BS-02 right ??? price & availability ... no problem ... This post has been edited by Doom: Jul 6 2007, 08:50 AM |
|
|
Jul 6 2007, 09:01 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(Doom @ Jul 6 2007, 08:50 AM) hahha if u want today also u could get the info from me coz I would be going ...today!! LOL..You seem like a constant customer at ATE. Always going there..Anyway, thanks alot. Do help me check it out. Besides, if possible, help me ask the availability of the LL Mobile Rack RH38 (black) as well ok. Been there looking for it last week but they ran out of stock as well...hahahaha ... Bezel and BS-02 right ??? price & availability ... no problem ... |
|
|
Jul 6 2007, 09:14 AM
|
|
Senior Member
4,504 posts Joined: Jan 2003 From: Setapak
|
|
|
|
Jul 6 2007, 09:17 AM
|
Senior Member
1,491 posts Joined: Jul 2005 From: 18 Layers Of Hell Status: Ripping Of Souls 
|
|
|
|
Jul 6 2007, 09:35 AM
|
|
Senior Member
4,504 posts Joined: Jan 2003 From: Setapak
|
|
|
|
Jul 6 2007, 09:48 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hahaha .. I've read that long before .... couple years back before ..
He could get such mirror shine out of patience and right polishing liquid... If u use Autosol U can't get the same detail or shine like him... Autosol just not fine and detail enough ... u could PM Cableguy what kind of polisher he uses and where he got it ... |
|
|
Jul 6 2007, 11:53 AM
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(ikan_semilang @ Jul 6 2007, 09:14 AM) How to polish aluminium? I'm polish using autosol now got dark surface... eh, how come? im using Autosol to polish my interior, and it shines like new..but i got problem when applied it to the large surfaces anyway u need to complete 2 things; 1. apply the appropriate amount of Autosol, and then rub the desired area 2. use the other towel or same towel with clean part and rub the same area to clean the dark part.. but i cant managed to polish the black area (front, top and side panel) anyway here is the sample result for polishing the PC-G7 pci slots using an Autosol (sorry for the low image quality) before  after  This post has been edited by kalakatu: Jul 7 2007, 06:53 PM |
|
|
Jul 6 2007, 03:45 PM
|
Senior Member
547 posts Joined: May 2006 From: Bumi Bertuah
|
|
|
|
Jul 7 2007, 12:42 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
Doom, using the A05 how do you turn off the PSU besides removing the front panel? Is it always on and if you want to tun it off you just plug out the power cord?
|
|
|
Jul 7 2007, 01:12 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Hhaha ..Normally I don't need to switch off my PSU .. coz usually I just unplug all the plugs connected to the power socket.
Yah u need to remove the front panel to gain access to the power switch behind of the PSU .... Anyway just got back from ATE today ... BS-02 still out of stock and Billy said he's trying to get some and he wants me to confirm how many units that LYN forumer wants .... so that he could be certain how many units to bring in .... as for the CD-ROM bezel there are plenty for black at the price of RM35 each ...so go grab it while stock last .... Using Autosol only allowed u to polish it back to the way it is but not mirror shine .... it just can't .. I tried myself ... an hour long polishing the surface of an aluminum but it just won't shine likes mirror..... I tried modeling kit's polisher and it works better in term of getting better polishing result but it's still far from mirror shine.... |
|
|
Jul 7 2007, 04:17 AM
|
|
Junior Member
224 posts Joined: Mar 2005
|
i need 1 BS-02 too, add me in the list ya.... thanks
|
|
|
Jul 7 2007, 08:33 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
how much is the bs-02 ? i'm in plannig stage to get a lian li casing too........
|
|
|
Jul 7 2007, 09:05 AM
|
|
All Stars
12,851 posts Joined: May 2005 From: Puchong, Selangor
|
QUOTE(LExus65 @ Jul 7 2007, 08:33 AM) how much is the bs-02 ? i'm in plannig stage to get a lian li casing too........ Not all LL cases can use BS-02.Make sure the LL case you intend to buy can use it. |
|
|
Jul 7 2007, 11:38 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(Togepy @ Jul 7 2007, 04:17 AM) i need 1 BS-02 too, add me in the list ya.... thanks Sure .... QUOTE(LExus65 @ Jul 7 2007, 08:33 AM) how much is the bs-02 ? i'm in plannig stage to get a lian li casing too........ It's RM55 or RM50 ... I could confirm later ... Anyway ...for those that not confirm about the compatibility can PM me .... I would check it out for u guys .... |
|
|
Jul 7 2007, 04:06 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Well, i thought the BS02 will be compatible with all LL casing considering if you have a mesh side panel window? I am sure the PC-7 is not going to be compatible with the BS03 as there is no holes at the back of the casing to suck /push air. For the BS02, just make sure that your GC's HSF is not blocking the fan itself..
Anyway Doom, include me for one BS02 as well if the price is right..Badly need one for my 8800. |
|
|
Jul 7 2007, 08:54 PM
|
|
Senior Member
2,597 posts Joined: Mar 2005 From: Kuala Lumpur
|
QUOTE(Doom @ Jul 7 2007, 01:12 AM) Hhaha ..Normally I don't need to switch off my PSU .. coz usually I just unplug all the plugs connected to the power socket. Doom, did u saw any A05B in ATE??Yah u need to remove the front panel to gain access to the power switch behind of the PSU .... Anyway just got back from ATE today ... BS-02 still out of stock and Billy said he's trying to get some and he wants me to confirm how many units that LYN forumer wants .... so that he could be certain how many units to bring in .... as for the CD-ROM bezel there are plenty for black at the price of RM35 each ...so go grab it while stock last .... Using Autosol only allowed u to polish it back to the way it is but not mirror shine .... it just can't .. I tried myself ... an hour long polishing the surface of an aluminum but it just won't shine likes mirror..... I tried modeling kit's polisher and it works better in term of getting better polishing result but it's still far from mirror shine.... This post has been edited by gmail: Jul 7 2007, 08:54 PM |
|
|
Jul 7 2007, 11:13 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Yah and in fact I took one behalf the owner today ..
This is the owner trying to lift the case ..... seems like Lian Li's case is really light enough...  His ex case .. CM 530  Installed case...    Owner locking up the side panels...   Here is the official owner of the case .... He's 7 years old only ... yah no cheating .... at all This post has been edited by Doom: Jul 7 2007, 11:14 PM |
|
|
Jul 8 2007, 10:27 AM
|
|
All Stars
10,479 posts Joined: Jan 2003 From: Sarawak
|
|
|
|
Jul 8 2007, 10:34 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
I heard about Lian Li when it was first introduce here back around 1998 ...
I'm not sure that's the Lian Li case or not but it should be coz it's the only case at that time that comes in full aluminum without PSU yet cost RM800 per unit ... My brother told me how he wished to grab one of those ... but too bad until now .. he's still using CM 530 only ... |
|
|
Jul 8 2007, 10:47 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Wow...Nice one Doom. How do you install the 2 fans at the side?
|
|
|
Jul 8 2007, 03:23 PM
|
Senior Member
2,378 posts Joined: Jan 2003 From: Miri,Sarawak,Malaysia Status: Dead!
|
I guess no screws on those fans. All are joined using cable ties.
|
|
|
Jul 8 2007, 05:17 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
an acrylic custom mod will do the job
u also gonna need to mod the side panel too for dual 120mm blow hole = two job mods required |
|
|
Jul 8 2007, 07:51 PM
|
Senior Member
875 posts Joined: Oct 2004 From: Selayang, Selangor
|
Hi,
Something to request you guys's help. My display got shadow and after a while. It will gone. It might something to do with FAN. I am remember about the exact the cause but I do remember someone raise this problem before. I am not sure the inflow fan or exhaust fan that spin not enough air in or out cause the display card show shadow. Do you guys remember and let me know the solution? Please advice. |
|
|
Jul 8 2007, 09:23 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
@akachester, Hyde`fK, E-J@1
hehehe ,, the two fans are joined with zip tie ... Then it's tight to the rear exhaust holes with wire strip... And there are two PCI slot bracket that screwed at the bottom of the fan as supporter .. .most won't realized it .. hheheh look carefully in the picture ,,, there's a bit of shine at the bottom of the fans... There's no side blow holes were done coz there's no need for the passive cooling 7300GT .... the dual fan already more than enough to cool off the card.. Besides the owner only play simple 3D game with the rig .. it just can't torture the card too much .... This post has been edited by Doom: Jul 8 2007, 09:23 PM |
|
|
Jul 9 2007, 03:35 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
LOL...Good idea there anyway. Hmm..Gave me a temporary idea for side VGA fan for now until i get the BS-02 though..LOL...
|
|
|
Jul 9 2007, 05:57 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
u can use that as permanent solution in my point of view.........hehe
|
|
|
Jul 9 2007, 07:50 PM
|
|
Junior Member
288 posts Joined: Jun 2007
|
Does the Lian Li A05 has adjustable PSU tray?
I am afraid that my Strider 560W would not fit in there because strider is slightly thicker because the 120mm fan grill occupies some space outside of the PSU. I scared that the fan grill would be blocked by the PSU support stand at the bottom of the PSU compartment in the A05. Commonly Lian Li cases comes with slightly adjustable PSU tray to allow usage of most PSU, but this A05 don't seem like it. So need an answer from the users. |
|
|
Jul 9 2007, 09:36 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm u could fit in if the gap is less than 5 mm ...
or u could place the PSU up side down .... |
|
|
Jul 9 2007, 09:40 PM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(Doom @ Jul 9 2007, 09:36 PM) hmm u could fit in if the gap is less than 5 mm ... Sorry, is it confirmed fit if less than 5mm?or u could place the PSU up side down .... Don't intend to turn the PSU upside down. The cable outlet would hard to manage. |
|
|
Jul 9 2007, 10:17 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Most likely it will be able to fits in ... as long as u don't tight the thumb screw so deep down ...
Yah it could tolerate and fit in ,,,, but the best would be u bring the PSU to test it out ... on the safe side.... |
|
|
Jul 10 2007, 12:52 AM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
hey guys, i wanna ask...
 thats my casing LL PC-7BYCF ( the one wit huge fan on the side panel ) i wanna replace the useless LL stock fans wit some better ones...lets say a 38MM thick fan..izzit possible? will it fit that area? any1 who have tried before can care to give some comments? thx This post has been edited by james2306: Jul 10 2007, 12:55 AM |
|
|
Jul 10 2007, 12:55 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(james2306 @ Jul 10 2007, 12:52 AM) hey guys, i wanna ask... the front intake for my Lian Li PC-7BYCF like the pic below Can't say for sure but from the looks of it, it will fit. Your hard disk would be mounted slightly towards the other end of hdd compartment.can i fit a 38MM thick fan between the hdd cage and the front intake? anyone try b4? |
|
|
Jul 10 2007, 12:56 AM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
waa so fast reply, i just rephrased my question
yea.. i also think it will fit... just adjust HDD a lil bit.. any one who have TRIED BEFORE care to comment? i just wanna be sure b4 i go buy the fan This post has been edited by james2306: Jul 10 2007, 12:57 AM |
|
|
Jul 10 2007, 01:04 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(james2306 @ Jul 10 2007, 12:56 AM) waa so fast reply, i just rephrased my question If you have the casing with you, just get a rough measurement of the front intake fan area yea.. i also think it will fit... just adjust HDD a lil bit.. any one who have TRIED BEFORE care to comment? i just wanna be sure b4 i go buy the fan |
|
|
Jul 10 2007, 01:09 AM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
yea.. its with me now.. i did measure.. and i think it will fit...
but im hoping for views from ppl who have used it to see if any other problems might pop up.. thx for ur help Polar |
|
|
Jul 10 2007, 01:36 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(james2306 @ Jul 10 2007, 12:52 AM) i wanna replace the useless LL stock fans wit some better ones...lets say a 38MM thick fan..izzit possible? Wat exactly do you mean by useless LL stock fans?? Mine's working just fine...only problem is the noise...motor noise to be exact. What's yours? |
|
|
Jul 10 2007, 02:12 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
@james...
i think the 38mm thick fan should be ok, because, i see the way of your HDD mounting is either facing to frontal panel or the other side (if you know what i mean), so i guess, it'll fit... |
|
|
Jul 10 2007, 10:34 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
Haha, thanks to Madman's pic, i already bought myself the dvd-bezel, very nice indeed.. but how come the cover is not aligned with the surface? as in when i look from the side, the upper part of the dvd-cover goes into the casing a bit.. or i have to push the dvd-rom outside a bit?
|
|
|
Jul 10 2007, 10:36 AM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
QUOTE(blessedvillain @ Jul 10 2007, 01:36 AM) hey james2306, yea, it is loud... but also, i dun think it pushes enuf air into my casing...thats y im askinWat exactly do you mean by useless LL stock fans?? Mine's working just fine...only problem is the noise...motor noise to be exact. What's yours? |
|
|
Jul 10 2007, 11:25 AM
|
Senior Member
1,635 posts Joined: Jan 2003 From: BASF Asia Pacific
|
my lian li casing is still stock. no mods. lmao. its the same as the one that the thread starter own except that its in silver !
|
|
|
Jul 10 2007, 01:11 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(ataris @ Jul 10 2007, 11:25 AM) my lian li casing is still stock. no mods. lmao. its the same as the one that the thread starter own except that its in silver ! mind to show your casing pics??  This post has been edited by blessedvillain: Jul 10 2007, 01:11 PM |
|
|
Jul 10 2007, 02:12 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(james2306 @ Jul 10 2007, 12:52 AM) hey guys, i wanna ask... Not sure how thick that will be but i tried mounting 3 types of fan before (1 is a delta fan, 1 FM121 and 1 Noctua SI1200) and all three fit without any problem..Plenty of space left for the HDD..thats my casing LL PC-7BYCF ( the one wit huge fan on the side panel ) i wanna replace the useless LL stock fans wit some better ones...lets say a 38MM thick fan..izzit possible? will it fit that area? any1 who have tried before can care to give some comments? thx I do not like the stock LL fan as well. Doesnt push enough air, noisy and coupled with the LL filter, its as good as without a fan already.. |
|
|
Jul 10 2007, 02:14 PM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(akachester @ Jul 10 2007, 02:12 PM) Not sure how thick that will be but i tried mounting 3 types of fan before (1 is a delta fan, 1 FM121 and 1 Noctua SI1200) and all three fit without any problem..Plenty of space left for the HDD.. I find LL fans to push quite alot amount of air comparing with other fans but the noise is audible.I do not like the stock LL fan as well. Doesnt push enough air, noisy and coupled with the LL filter, its as good as without a fan already.. |
|
|
Jul 10 2007, 03:27 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
my LL fan came with EX-33 is quite good actually, works quite well..........i supposed all should be same rite ? rated at 0.27A
|
|
|
Jul 10 2007, 06:11 PM
|
|
All Stars
10,479 posts Joined: Jan 2003 From: Sarawak
|
last time Lian li casing used Adda fans. now, my lianli casing (PC-G7) is using lianli fan. does lianli make it's own fan? or rebranded adda fan?
|
|
|
Jul 10 2007, 06:39 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(Skylinestar @ Jul 10 2007, 06:11 PM) last time Lian li casing used Adda fans. now, my lianli casing (PC-G7) is using lianli fan. does lianli make it's own fan? or rebranded adda fan? More like a rebranded. |
|
|
Jul 10 2007, 09:28 PM
|
|
Senior Member
875 posts Joined: Oct 2004 From: Selayang, Selangor
|
Something to ask you guys, I am using V1200 and I am wondering exhaust fan should be at the back or with the patent fan that at side panel?
Which one got better performance? |
|
|
Jul 10 2007, 11:59 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Depend u configuration ... if U would be u I would just make side patent fan serve as intake for gc and south bridge..
While the rear set to exhaust to take out the hot air taken from the top ... |
|
|
Jul 12 2007, 12:25 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
@Doom
Did you encounter any problem installing the Lian Li DVD Rom bezel to the LL A05? Does the rivet at the case interferes with the bezel? |
|
|
Jul 12 2007, 08:20 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
yah a bit but just screws it down and there would be slight gap about 1 to 2 mm ....
so have to push the burner out slightly to match the gap ... but there's no real problem at all coz the drive's tray able to eject properly . |
|
|
Jul 12 2007, 10:14 PM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
hey..
the 32mm thick can fitted like a charm bought a unused Silverstone FM122 (32mm think one) from a forummer here....but the frame black...it wuz from one of the CPU Cooler fan im waiting on a PCI IDE card and a new SATA hdd im supposed to get tmrw, then ill post up pics of my LL rig |
|
|
Jul 13 2007, 08:04 PM
|
|
Junior Member
288 posts Joined: Jun 2007
|
Just gotten my own A05B
Seems to be last unit of stock available now . |
|
|
Jul 13 2007, 11:36 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
is it??? U must be lucky then .. cos it takes quite some times to restock ...
Anyway any photo of ur new babe to sparkle out eyes .... |
|
|
Jul 14 2007, 12:00 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(Doom @ Jul 13 2007, 11:36 PM) is it??? U must be lucky then .. cos it takes quite some times to restock ... Thats according to the guy at ATE.Anyway any photo of ur new babe to sparkle out eyes .... Is it okay to clean the anodised black alumunium surface with a clean cloth and kiwi kleen dish washer? Will dish washer react with aluminium? |
|
|
Jul 14 2007, 12:03 AM
|
Senior Member
1,436 posts Joined: Mar 2005
|
walao Doom, my A05 damn hot. kinda regret getting it. all the heat is focused in front. btw, your psu is facing down or facing up?
|
|
|
Jul 14 2007, 12:05 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(Sanko @ Jul 14 2007, 12:03 AM) walao Doom, my A05 damn hot. kinda regret getting it. all the heat is focused in front. btw, your psu is facing down or facing up? Sanko what PSU you using? |
|
|
Jul 14 2007, 12:06 AM
|
|
Senior Member
1,436 posts Joined: Mar 2005
|
corsair HX620W. i never had heat problem with that psu. but just now when i touch it, damn... it was so hot!
|
|
|
Jul 14 2007, 12:14 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(Sanko @ Jul 14 2007, 12:06 AM) corsair HX620W. i never had heat problem with that psu. but just now when i touch it, damn... it was so hot! How come? The A05 airflow seems okay. |
|
|
Jul 14 2007, 12:41 AM
|
|
Senior Member
1,436 posts Joined: Mar 2005
|
maybe my hdd too hot. sien...
|
|
|
Jul 14 2007, 10:34 AM
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
sanko, change ur psu position, so that the fan will be right below ur hdd.. so hopefully it can suck out all the heat from both psu n ur raptor
|
|
|
Jul 14 2007, 10:43 AM
|
|
Senior Member
1,436 posts Joined: Mar 2005
|
i tried that already.... not much different. maybe because the hot air is trap inside the psu cause the air flow is being converted to the side. so it stuck in front in the middle before going to the side.
|
|
|
Jul 14 2007, 11:09 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
Your PSU uses a 120mm fan?
I need to know whether the casing would fit a silverstone strider 560W or not? Because the i scared the space for the PSU compartment would not fit the PSU with the bulging 120mm fan grill. |
|
|
Jul 14 2007, 01:50 PM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
QUOTE(Sanko @ Jul 14 2007, 10:43 AM) i tried that already.... not much different. maybe because the hot air is trap inside the psu cause the air flow is being converted to the side. so it stuck in front in the middle before going to the side. owh ya.. i thought the casing has hole at the back of psu just like normal casing.. so now apa lagi.. watercooled ur psu laa |
|
|
Jul 14 2007, 02:11 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(irenic @ Jul 14 2007, 01:50 PM) owh ya.. i thought the casing has hole at the back of psu just like normal casing.. so now apa lagi.. watercooled ur psu laa crazy la like dat watercool ur psu |
|
|
Jul 14 2007, 10:57 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(Polar_012 @ Jul 14 2007, 12:00 AM) Thats according to the guy at ATE. Nope it won't, I been cleaning all my cases with cleaning detergent ... Is it okay to clean the anodised black alumunium surface with a clean cloth and kiwi kleen dish washer? Will dish washer react with aluminium? No problem at all .. coz it won't damage the surface at all .. It just remove the dust and some oily finger prints... |
|
|
Jul 14 2007, 11:00 PM
|
|
Senior Member
1,635 posts Joined: Jan 2003 From: BASF Asia Pacific
|
nice tip doom.
|
|
|
Jul 14 2007, 11:28 PM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
Hehe, guess what i use to clean the casing? » Click to show Spoiler - click again to hide... «
|
|
|
Jul 15 2007, 12:34 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
Here's my rig. New A05B.
Sorry the image is blur and a bad angle.  Took me a long time for cable management and finally the cable isn't managed properly till had to skip 2 tuition lessons. Anyway i won't show you my cacings |
|
|
Jul 15 2007, 12:41 AM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
im thinking of modding my G7 further..any idea to share?
|
|
|
Jul 15 2007, 12:53 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
@Polar_012
Are u sure it's fine for the processor to run with passive cooling on Ultra-120 ?? I thought Ultra-120 series required high CFM fan to utilize it's performance.. Anyway share some 'Cacing' over here .... @kalakatu Why on earth do u need to mod G7 ... it's a great case for both cable management and cooling performance... |
|
|
Jul 15 2007, 12:59 AM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(Doom @ Jul 15 2007, 12:53 AM) @kalakatu to be honest, so far i satisfied for the cable management and airflow Why on earth do u need to mod G7 ... it's a great case for both cable management and cooling performance... i mean the mod that can transform it to a very fancy casing |
|
|
Jul 15 2007, 01:16 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(Doom @ Jul 15 2007, 12:53 AM) @Polar_012 Not very sure because my temps reading is totally wrong. Now showing at 22C at bios Are u sure it's fine for the processor to run with passive cooling on Ultra-120 ?? I thought Ultra-120 series required high CFM fan to utilize it's performance.. Anyway share some 'Cacing' over here .... @kalakatu Why on earth do u need to mod G7 ... it's a great case for both cable management and cooling performance... .I put my fan 3-pin socket to the CPU fan header and the fan won't spin...had to off the smart fan method at bios. Now installed a fan but i can't seem to install the fan clip properly. The air above my rams are cooler. Before this very hot. This post has been edited by Polar_012: Jul 15 2007, 01:19 AM |
|
|
Jul 15 2007, 04:11 AM
|
Senior Member
1,487 posts Joined: Dec 2006 From: Ja Bee
|
Polar_012... more pic pls..
how much is this A05B? |
|
|
Jul 15 2007, 04:54 AM
|
|
Senior Member
2,597 posts Joined: Mar 2005 From: Kuala Lumpur
|
finally can join u guys, hooted a LL A07 yesterday.
will post pict later when my rig is up |
|
|
Jul 15 2007, 06:57 AM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(rsangel @ Jul 15 2007, 04:11 AM) Polar_012... more pic pls.. Sorry bro no camera, only got blurry handphone cam which probably shows nothing how much is this A05B? A05B is RM348 This post has been edited by Polar_012: Jul 15 2007, 06:58 AM |
|
|
Jul 15 2007, 09:42 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(Polar_012 @ Jul 15 2007, 01:16 AM) Not very sure because my temps reading is totally wrong. Now showing at 22C at bios Yah ...for the fan clips to work properly u have to apply the pin into the heatsink hole nicely before attach the fan ... .I put my fan 3-pin socket to the CPU fan header and the fan won't spin...had to off the smart fan method at bios. Now installed a fan but i can't seem to install the fan clip properly. The air above my rams are cooler. Before this very hot. |
|
|
Jul 15 2007, 11:00 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
wah ultra 120 n tracer rams...........very nice indeed.......
btw as doom mention earlier ultra 120 do need high air flow to achieve cooling......passive setup wont do any good from it |
|
|
Jul 16 2007, 04:54 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Went to ATE again yesterday to check on the availability of those fans but to my dissapointment, no stock again as off yet. Wondering how long it takes for them to restock once?
Was tempted to get the temperature/fan controller as well though but decided not to for the moment. Might get it when i go and purchase the fan from them.. |
|
|
Jul 16 2007, 05:49 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
this Lian Li thread is like an ATE thread already
|
|
|
Jul 16 2007, 07:34 PM
|
|
Junior Member
288 posts Joined: Jun 2007
|
Just to share my experience. The A05 casing has good airflow. Maybe because i mount the PSU with the 120mm fan upwards, together with the front exhaust it pushes alot of air out of the case and pulls air from the back. Besides the hot air coming out of my GTS goes right up. If using other normal ATX casing where the exhaust holes of GTS faces down, the hot air stays there.
QUOTE(E-J@1 @ Jul 16 2007, 05:49 PM) this Lian Li thread is like an ATE thread already Probably because they are the only 1 that bring in variety of LL casing |
|
|
Jul 16 2007, 08:09 PM
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
lianli pc-7 is a good casing? My brother wan to get it becos it is light-weight and it saw those fan which is nice to get good air flow in the case.
|
|
|
Jul 16 2007, 08:43 PM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(ben3003 @ Jul 16 2007, 08:09 PM) lianli pc-7 is a good casing? My brother wan to get it becos it is light-weight and it saw those fan which is nice to get good air flow in the case. It is a good casing. However the 25cm fan isn't recommended. 1st with that big meshed window at the side panel, you probably hear sounds from each of your fans in the casing. Yup the mesh window made the sound very audible.2nd the internal of the casing would get very dusty quickly. This post has been edited by Polar_012: Jul 16 2007, 08:46 PM |
|
|
Jul 16 2007, 08:57 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
where got 25cm fan? I tot is two 120mm at front and rear?
|
|
|
Jul 16 2007, 09:25 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(ben3003 @ Jul 16 2007, 08:57 PM) where got 25cm fan? I tot is two 120mm at front and rear? PC-7 got 1 version which got a 25cm side panel fan... |
|
|
Jul 16 2007, 09:26 PM
|
|
Junior Member
288 posts Joined: Jun 2007
|
QUOTE(ben3003 @ Jul 16 2007, 08:57 PM) where got 25cm fan? I tot is two 120mm at front and rear? Oops i was refering toLian Li PC7YCF You can hardly find a Lian Li PC-7 without the 25cm fan in lyp |
|
|
Jul 16 2007, 09:30 PM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
any idea how much is the Lian Li LCD Temperature and Fan Controller ?
|
|
|
Jul 16 2007, 10:05 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
oh.. my bro say the pc-7 at lowyat sell for 280 only o.. is this true a? The 25cm fan really got effect?
Added on July 16, 2007, 10:13 pmand if u say the big fan don wan then how o... take it off tehn no effect side cooling oleidi. This post has been edited by ben3003: Jul 16 2007, 10:13 PM |
|
|
Jul 16 2007, 10:40 PM
|
|
Senior Member
2,597 posts Joined: Mar 2005 From: Kuala Lumpur
|
QUOTE(Polar_012 @ Jul 16 2007, 09:26 PM) cycom got pc7 without the 25cm but comes with a transparent sidepanel like the 1 found in pc-60.QUOTE(ben3003 @ Jul 16 2007, 10:05 PM) oh.. my bro say the pc-7 at lowyat sell for 280 only o.. is this true a? The 25cm fan really got effect? u r right only rm280, the 25cm fan is sucking too much of dust to the panel, i prefer the panel without the fan.Added on July 16, 2007, 10:13 pmand if u say the big fan don wan then how o... take it off tehn no effect side cooling oleidi. |
|
|
Jul 17 2007, 01:58 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
here's what i bought today @LowYat Plaza
, err... the 7950GT is second hand ok  Lian Li CD-ROM Bezel (Closed & Opened) & Lian Li LCD Temperature & Fan Controller   |
|
|
Jul 17 2007, 02:41 AM
|
Senior Member
2,765 posts Joined: Nov 2005 From: **Hornbills**
|
yeah nice mobo..the lcd temperature n fan controller also nice
how much izzit bro?control 2fan oni? |
|
|
Jul 17 2007, 08:23 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(mfcm @ Jul 17 2007, 02:41 AM) yeah nice mobo..the lcd temperature n fan controller also nice yeah, nice... thanks, but i do get recommended to get the DS3R, but i feel like how much izzit bro?control 2fan oni?, this is for my friend as he demanding this motherboard, i have to follow his order , otherwise... i might get the DS3R as well , well... as for Temperature Monitoring & Controller, i got at RM65 , until now, i have no idea on how-to connect those fan speed controller |
|
|
Jul 17 2007, 08:52 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Nice temperature sensor there. Any other backlight color except blue?
|
|
|
Jul 17 2007, 09:07 AM
|
|
All Stars
12,851 posts Joined: May 2005 From: Puchong, Selangor
|
@sniper69
Do you really need the drive bezel for your PC-A10? I thought A10 door is to hide the ugly drive colour (non matching black or white) for being see. Closing the door also will hide the LCD front panel as well, unless you keep the door open all the time. This post has been edited by WebWalker: Jul 17 2007, 09:18 AM |
|
|
Jul 17 2007, 09:18 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(akachester @ Jul 17 2007, 08:52 AM) Nice temperature sensor there. Any other backlight color except blue? i'm afraid not... , personally i do like the yellow backlight, classic QUOTE(WebWalker @ Jul 17 2007, 09:07 AM) @sniper69 yeah i do need, it's just more "sleek"... besides... it's better la, and i'm losing a penny though... Do you really need the drive bezel for your PC-A10? I thought A10 door is to hide the ugly drive colour (non matching black or white) for being see. |
|
|
Jul 17 2007, 09:21 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(WebWalker @ Jul 17 2007, 09:07 AM) @sniper69 well... FYI, i'm getting ready for upcoming PC-A70a which is currently not available in ATE... Do you really need the drive bezel for your PC-A10? I thought A10 door is to hide the ugly drive colour (non matching black or white) for being see. Closing the door also will hide the LCD front panel as well, unless you keep the door open all the time.  |
|
|
Jul 17 2007, 10:19 AM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(gmail @ Jul 16 2007, 10:40 PM) cycom got pc7 without the 25cm but comes with a transparent sidepanel like the 1 found in pc-60. Without fan also makes the pc very hot like my super lanboy which i ask ianho to drill 2 holes out for me. The modding cost rm60 for 2 blow holes oleidi.. Or without side fan the casing still can retain good temp for the lian-li casing?u r right only rm280, the 25cm fan is sucking too much of dust to the panel, i prefer the panel without the fan. |
|
|
Jul 17 2007, 10:43 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(ben3003 @ Jul 17 2007, 10:19 AM) Without fan also makes the pc very hot like my super lanboy which i ask ianho to drill 2 holes out for me. The modding cost rm60 for 2 blow holes oleidi.. Or without side fan the casing still can retain good temp for the lian-li casing? dat's bcoz ur Lanboy HDD Cage blocking the intake air = system hot = ur proc & gc gasping for fresh air coz the coolers circulating a hot air This post has been edited by E-J@1: Jul 17 2007, 10:43 AM |
|
|
Jul 17 2007, 01:56 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
so i ask ianho help me open 2 blow holes lo lolz... So u mean pc-7 even without the huge 25cm fan still can get good temp?
|
|
|
Jul 17 2007, 04:17 PM
|
|
All Stars
12,851 posts Joined: May 2005 From: Puchong, Selangor
|
QUOTE(ben3003 @ Jul 17 2007, 01:56 PM) so i ask ianho help me open 2 blow holes lo lolz... So u mean pc-7 even without the huge 25cm fan still can get good temp? I think without the 25cm fan, you can still install those LL patent side panel fan.It help to cool down the graphic card air zone. |
|
|
Jul 17 2007, 05:42 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
i saw review site say the patent one is omsehting called squirrel hole rite? They said not very efficient compared to straight blow in one.
|
|
|
Jul 17 2007, 10:34 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Basically the side patent fan that WebWalker refers to Lian Li own side fan frame with fan ..
There are two model BS-02, BS-03 ..there should be another one which is currently no more available ... But still could get it from some other older model ... BS-02 draw or exhaust according to the fandiection directly .. while BS-03 uses the fan frame as air guide to exhaust air .. |
|
|
Jul 18 2007, 02:43 AM
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
My LiL Forest powered by ianho
Btw this is a sneak preview  |
|
|
Jul 18 2007, 07:37 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(Kyogezsho @ Jul 18 2007, 02:43 AM) My LiL Forest powered by ianho Interesting mod Btw this is a sneak preview » Click to show Spoiler - click again to hide... « ....but please do tell me this mod is for a girl... |
|
|
Jul 18 2007, 08:35 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Girl or not girl, thats a beauty..Anyway, which casing is that?
|
|
|
Jul 18 2007, 08:41 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(akachester @ Jul 18 2007, 08:35 AM) Girl or not girl, thats a beauty..Anyway, which casing is that? i think it's either V1xxx or V2xxx |
|
|
Jul 18 2007, 08:58 AM
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Cute casing with that sleeping forest XD. Air Gear fans ?? XD
Just want to know is it posible that if it apply heatsink for cpu together with the LianLin's Air Duct ? I feel like that air duct will blocking there. |
|
|
Jul 18 2007, 09:18 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
It's definitely air gear fans .. .haha I'm one of them as well ....
Sexy girl sliding through the deep green forest with their shinning wheels. .. Anyway from the length it's V1000B Plus II .... nice cutting on the top .. .and I love the decal ... probably I should get one with other design for the other side of my A05 .. |
|
|
Jul 18 2007, 11:05 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(Kyogezsho @ Jul 18 2007, 02:43 AM) My LiL Forest powered by ianho powered by ianho??? no wonder la the feller hasnt spoken to me on msn these past few days...but.... how u fit the feller in such a case?? » Click to show Spoiler - click again to hide... « |
|
|
Jul 18 2007, 02:10 PM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
haha its a guy casing ... girls dont really watch air gear thou cause there are so much ecchi scenes
here is another preview btw its a V1000 Plus B done by uncle ho .. hes gonna post a worklog soon but this casing is so nice ... so i decided to post some pics in this thread before he finish it off with the worklog cause its 90% done so far  This post has been edited by Kyogezsho: Jul 18 2007, 02:11 PM |
|
|
Jul 18 2007, 02:23 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
wah very nice indeed...........i believe after the side fan also change to a bling bling 1 it's even better........
btw all the opening are covered by arcylic panel or just like that ?? |
|
|
Jul 18 2007, 04:07 PM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
top is covered by arclyic panel .. the panel for the side is not ready yet .. still awaiting uncle ho to have mood to cut it .. then it will look similar to his king kong one .. at first page
but mine is different as in its the first mod that my HDD wires all ist at the back and there isnt any wires visible at my hdd rack in the front |
|
|
Jul 18 2007, 09:43 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(Kyogezsho @ Jul 18 2007, 04:07 PM) top is covered by arclyic panel .. the panel for the side is not ready yet .. still awaiting uncle ho to have mood to cut it .. then it will look similar to his king kong one .. at first page but mine is different as in its the first mod that my HDD wires all ist at the back and there isnt any wires visible at my hdd rack in the front So fast got preview d. I spent the whole day today resting n just chilling by the pool to recover my modding powerz. Few days continuous modding sapped my powerz d. No power to upload photos oso. |
|
|
Jul 19 2007, 12:34 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Really nice bling bling mod ... and another fine workmanship done by our uncle ....
Anyway don't u feel a bit killing when running the system in dark .. the lightings are killing my eyes right now when look at the photo although it's really nice ..... |
|
|
Jul 19 2007, 01:12 AM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
hahah can always off one mah
... btw still awaiting uncle`s last part hahaha that time it will be a complete casing |
|
|
Jul 19 2007, 01:26 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmmm ok ok really looking forward for this superb bling bling case with sexy enclosure...
I thought it would be best to light up the interior with purple and pink to match the sleeping forest theme... hahah just suggestion only since I'm one of the fan as well ... |
|
|
Jul 19 2007, 09:10 AM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
purple n pink will look too gay for me LOL
|
|
|
Jul 19 2007, 09:47 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
just got HR-05 SLI from lolhalol and installed, well just want to share with you guys
... here's the pictures...   ok, pardon me for those messy cables, the 120mm Panaflo blows directly to HR-01 and HR-05 SLI, sucked through Lian Li BS-02 (Bundled with PC-A10a), well it works , FYI, the top hole, leave intact, meaning it's intake, not exhaust , only i did was, put a filter (i found in my ex-PowerLogic Atrix 5000 casing)» Click to show Spoiler - click again to hide... «  the temperature reading, fan controller all are none , it's just show off only,  i have to do some cable management on this part |
|
|
Jul 19 2007, 10:19 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(Kyogezsho @ Jul 19 2007, 09:10 AM) purple n pink will look too gay for me LOL Aio ur are guy the case is neutral .. The case must not need to reflects the owner mah ... It's for art and aesthetic purpose mah ... |
|
|
Jul 20 2007, 08:39 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
@sniper69,
Wah, becoming TR family already..Whaha..Where is your HR-01?Assemble it mar until it really become one full TR family.. |
|
|
Jul 20 2007, 10:19 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(akachester @ Jul 20 2007, 08:39 AM) @sniper69, don't you mean HR-03 (VGA cooler), well i sold it (kinda regret now Wah, becoming TR family already..Whaha..Where is your HR-01?Assemble it mar until it really become one full TR family.. ), anyway got good offer, why don't sell it , well, even i put the HR-03, i can't install the BS-02 patented side fan la, i must tell you, the BS-02 really help on exhausting the hot air produced by GPU. as you can see from the picture, the cool air suck through top panel (filtered), through that monster 120mm Panaflo and out by those 2 exhaust fan at rear and the BS-02, i'm thinking to get another 70mm (thin) or stock AMD fan; 80mm or 92mm fan for HR-05 SLI and rotate 90 that HR-05 SLI, but afraid blocked by the PCI-e connector , well will do that later... |
|
|
Jul 20 2007, 11:57 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
is it my eyes or ur mobo and the heat sink are full of dust ??
but the tower of thermal right really amazing........... |
|
|
Jul 20 2007, 01:32 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(LExus65 @ Jul 20 2007, 11:57 AM) is it my eyes or ur mobo and the heat sink are full of dust ?? it's your eyes but the tower of thermal right really amazing........... , anyway... haven't clean the motherboard as my spray can over already, thinking to cleaning with alcohol or something , FYI this system been exposed without casing and until now, no time to clean it up ... yeah, indeed, those tower really admires me... |
|
|
Jul 21 2007, 08:11 AM
|
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
Hey i saw my soundcard
hehe anyway nice casing u have there |
|
|
Jul 21 2007, 09:55 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sniper69 @ Jul 20 2007, 10:19 AM) don't you mean HR-03 (VGA cooler), well i sold it (kinda regret now Oh, too bad then. If not, you will have a whole family of TR towers there together with a LL casing..LOL..It would be beautiful.. ), anyway got good offer, why don't sell it , well, even i put the HR-03, i can't install the BS-02 patented side fan la, i must tell you, the BS-02 really help on exhausting the hot air produced by GPU. as you can see from the picture, the cool air suck through top panel (filtered), through that monster 120mm Panaflo and out by those 2 exhaust fan at rear and the BS-02, i'm thinking to get another 70mm (thin) or stock AMD fan; 80mm or 92mm fan for HR-05 SLI and rotate 90 that HR-05 SLI, but afraid blocked by the PCI-e connector , well will do that later...Anyway, i am really eager to get the side fan but ATE still does not have them. Leave me no choice but to DIY my own side panel fan..LOL..Tie 2 LL Led fan to the side of the mesh panel using wires to cool the GC area off as off now. But i am using it as intake instead of exhaust though..LOL... |
|
|
Jul 22 2007, 12:20 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hahahah .... I once had the whole TR family also ...
check it here,,,, TR FAMILY Yah.. there's no side fan yet ,,,, wanted to get one also ... hahahha ,,,seems like my dual side fans method become useful now .... Setting those fan as intake is better than exhaust .... |
|
|
Jul 22 2007, 12:24 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(Doom @ Jul 22 2007, 12:20 AM) hahahah .... I once had the whole TR family also ... errrm... what do you mean, dual side fan? check it here,,,, TR FAMILY Yah.. there's no side fan yet ,,,, wanted to get one also ... hahahha ,,,seems like my dual side fans method become useful now .... Setting those fan as intake is better than exhaust .... |
|
|
Jul 22 2007, 12:53 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(sniper69 @ Jul 22 2007, 12:24 AM) errrm... what do you mean, dual side fan? something like in the post 142 of this thread... Lian Li League V3.0 |
|
|
Jul 22 2007, 04:07 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(Doom @ Jul 22 2007, 12:20 AM) hahahah .... I once had the whole TR family also ... LOL..yea, its a very useful setup for the time being until i get my hands on the side panel fan. I did a different setup actually. What i did is just tie the fan using wire to my mesh side panel.check it here,,,, TR FAMILY Yah.. there's no side fan yet ,,,, wanted to get one also ... hahahha ,,,seems like my dual side fans method become useful now .... Setting those fan as intake is better than exhaust ....   |
|
|
Jul 22 2007, 05:00 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Yah this is what I'm talking about as well ... dual 12cm fan for maximum cooling ...
Any temperature result to share here before and after having the dual fans ... This post has been edited by Doom: Jul 22 2007, 05:00 PM |
|
|
Jul 22 2007, 07:31 PM
|
|
All Stars
10,479 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(akachester @ Jul 22 2007, 04:07 PM) LOL..yea, its a very useful setup for the time being until i get my hands on the side panel fan. I did a different setup actually. What i did is just tie the fan using wire to my mesh side panel. your whole sidepanel is mesh. must be a lot of dust.but there's an advantage where u can hook up your fans anywhere. why don't u use black tie-wrap. looks better than the bare wire. my PC-G7 side panel mesh is used as vent for exhaust. but the airflow is being blocked a lot by the mesh. i can't set as intake cos i don't have filter. anyone plan to buy sth from uglyvamp? can get one filter for me? i'll pay u when cod. This post has been edited by Skylinestar: Jul 22 2007, 07:35 PM |
|
|
Jul 22 2007, 10:11 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(Doom @ Jul 22 2007, 05:00 PM) Yah this is what I'm talking about as well ... dual 12cm fan for maximum cooling ... Yea, i have posted them in the 8series thread. Any temperature result to share here before and after having the dual fans ... Anyway, my main intention with this dual 12cm fan cooling is for my GC which is causing me alot of heat problem thus far. Heat rises from 58c to 70c during idle after a day or two without turning the PC off. This temperature is in a fanless environment. Then, i need to think of a solution first before i get my hands on the side panel fan and thus, came up with this idea (thanks to you) on a dual fan setup..LOL.. Temperature wise, it used to be about 58c when i turn on my PC and shoot up to 70c after a day or two without turning my PC off. This is on idle. After putting those dual fans there, it is about 54c when i turn my PC off and never shoot up above 58c after over 2 days already..Incredible result indeed. Love side panel fans..In fact, its at a constant 57c now on idle. Keep in mind, this are on the poor LL fan that i do not like last time. I am wondering, how good it will be if i get my hands on the side panel fan and replace it with a SS..LOL...QUOTE(Skylinestar @ Jul 22 2007, 07:31 PM) your whole sidepanel is mesh. must be a lot of dust. Well, thats a main problem for me thus far - dust. But i have no choice but to do this at the moment to control the temperature of my GC. This is just a temporary solution until i get my hands on my side panel fan first. About the wire, well, at first, i tried to use black cable-tie but it wouldnt go into those mesh. They are simply too thick at the moment. Anyway, i dont mind it looking ugly as off now cause this is just a temporary solution. All i need is filters..LOL...but there's an advantage where u can hook up your fans anywhere. why don't u use black tie-wrap. looks better than the bare wire. my PC-G7 side panel mesh is used as vent for exhaust. but the airflow is being blocked a lot by the mesh. i can't set as intake cos i don't have filter. anyone plan to buy sth from uglyvamp? can get one filter for me? i'll pay u when cod. |
|
|
Jul 23 2007, 11:29 AM
|
Senior Member
599 posts Joined: Jan 2003 From: Kuala lumpur
|
guys just want to share...Today i going to go to lowyat and take my NEW Lian Li casing PC-10a
SO happy.... |
|
|
Jul 23 2007, 01:17 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(KiLLer^Boy @ Jul 23 2007, 11:29 AM) guys just want to share...Today i going to go to lowyat and take my NEW Lian Li casing PC-10a err... don't you mean PC-A10a?, IIANM, there's no PC-10a SO happy.... |
|
|
Jul 23 2007, 04:08 PM
|
|
Senior Member
599 posts Joined: Jan 2003 From: Kuala lumpur
|
HAhaha.. sorry typing error... yup... PC-A10a
This post has been edited by KiLLer^Boy: Jul 23 2007, 04:09 PM |
|
|
Jul 23 2007, 04:17 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
put picture, remember that ............... btw check out whether they got a71 or a70 already or not ?
|
|
|
Jul 23 2007, 08:20 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(LExus65 @ Jul 23 2007, 04:17 PM) put picture, remember that ............... btw check out whether they got a71 or a70 already or not ? i asked Billy and Jason, well, it's unavailable or in other words, it's not arriving YET ... |
|
|
 Jul 24 2007, 02:36 AM
|
|
Senior Member
3,795 posts Joined: Jan 2003 From: .: Old Klang Road :.
|
After 2months time stay in Ian's house,
finally my Ah Lian back ~ 
This post has been edited by ahpaul82: Jul 24 2007, 02:36 AM |
|
|
Jul 24 2007, 03:05 AM
|
|
Senior Member
2,765 posts Joined: Nov 2005 From: **Hornbills**
|
QUOTE(ahpaul82 @ Jul 24 2007, 02:36 AM) After 2months time stay in Ian's house, wahaa..now can enjoy dy bro finally my Ah Lian back ~
btw its top blow fan ek bro?nice as usual made by ian |
|
|
Jul 24 2007, 08:33 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
can show more picture, want .........
not yet arrive..........need to wait again........ |
|
|
Jul 24 2007, 08:33 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(ahpaul82 @ Jul 24 2007, 02:36 AM) After 2months time stay in Ian's house, Wah! 2.30am posting pix. This fella sure whole night stay up to install everything. finally my Ah Lian back ~ QUOTE(mfcm @ Jul 24 2007, 03:05 AM) wahaa..now can enjoy dy bro It's a 2x120 radiator at the top man. Paul gila cooling d. He wants to use his PC as aircond n cool down his whole room with it. btw its top blow fan ek bro?nice as usual made by ian |
|
|
Jul 24 2007, 09:02 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmmm . .. does it works ??
Still waiting for more photo of the rig and some temperature result of the dual top fans.. |
|
|
Jul 24 2007, 09:19 PM
|
|
Senior Member
2,597 posts Joined: Mar 2005 From: Kuala Lumpur
|
QUOTE(ianho @ Jul 24 2007, 08:33 PM) Wah! 2.30am posting pix. This fella sure whole night stay up to install everything. good idea, cheaper electricity bill It's a 2x120 radiator at the top man. Paul gila cooling d. He wants to use his PC as aircond n cool down his whole room with it. |
|
|
Jul 25 2007, 12:10 AM
|
|
Senior Member
3,795 posts Joined: Jan 2003 From: .: Old Klang Road :.
|
yesterday do until 4am...
simply put in everything and run first here is the pic, 
running Fanless for the CPU Tubing cannot come on time, so cannot set up Watercooling ... the Radiator doing nothing there ... This post has been edited by ahpaul82: Jul 25 2007, 12:10 AM |
|
|
Jul 25 2007, 12:37 AM
|
|
Senior Member
2,765 posts Joined: Nov 2005 From: **Hornbills**
|
QUOTE(ahpaul82 @ Jul 25 2007, 12:10 AM) yesterday do until 4am... haha told me not much time playing pc now..seem be more busy playing it now simply put in everything and run first here is the pic,
running Fanless for the CPU Tubing cannot come on time, so cannot set up Watercooling ... the Radiator doing nothing there ... |
|
|
Jul 25 2007, 12:47 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
since my Asus EN7950GT went dead just now
, i think i'm going to give my Lian Li a simple touch up ... here's what i'm going to do (i think)1. the motherboard tray - thinking to cut some hole (not exactly a hole though), simple rectangular hole for easier cable management (hiding the ATX power cable) 2. the chassis - make way for cables, currently i need to use long way to use the cable routing, (i think picture might help) 3. HDD cage - rotate to the other side, means, the power / data cable will be facing on the right side instead of left side, result... cleaner look as no visible cable... 4. sleeving all cables with black sleeving kit... |
|
|
Jul 25 2007, 01:20 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm that we be lots of task to be done ... also
modding the tray with holes ... change the HDD's cage ..and etc... I wonder how it would turns out to be .. .waiting for update...!! |
|
|
Jul 25 2007, 02:05 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(Doom @ Jul 25 2007, 01:20 AM) hmm that we be lots of task to be done ... also the sleeving can wait, since not necessarily, but for HDD cage and those holes, i'm hoping my cheapo tools will do the job, otherwise, afraid ended up screwed up the whole A10a... modding the tray with holes ... change the HDD's cage ..and etc... I wonder how it would turns out to be .. .waiting for update...!! This post has been edited by sniper69: Jul 25 2007, 02:05 AM |
|
|
Jul 25 2007, 02:09 AM
|
|
Senior Member
2,765 posts Joined: Nov 2005 From: **Hornbills**
|
QUOTE(sniper69 @ Jul 25 2007, 02:05 AM) the sleeving can wait, since not necessarily, but for HDD cage and those holes, i'm hoping my cheapo tools will do the job, otherwise, afraid ended up screwed up the whole A10a... hehe if screwed up then will be A10a limited edition |
|
|
Jul 25 2007, 02:17 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(mfcm @ Jul 25 2007, 02:09 AM) hehe if screwed up then will be A10a limited edition , don't scare me le... i used to mod/cut cheapo casing, not the expensive like this... * update * done the HDD cage, will upload picture later , IMO, not bad for overnight job ...This post has been edited by sniper69: Jul 25 2007, 06:09 AM |
|
|
Jul 25 2007, 07:54 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
aluminum is slightly softer and not easy to be file.........so cut wisely and shiftly........
ur 7950 is dead, i tot u just got it like last week ?? 100oC egg boiler really shock ar.........hehe may be u should do like ahpaul did...... cannot wait for ah paul's water setup........ |
|
|
Jul 25 2007, 11:15 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Better get it right at on the first attempt unless u have spare A10 line up waiting to be chop chop ... hahahh
|
|
|
Jul 25 2007, 02:23 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
* updates *
this is the 95% naked of Lian Li PC-A10a  closer look, where i'm going to cut for the cable routing, it's near the slider tray  left & right side look, this is stock HDD cage   removing rivets done, errr of course with the masking tape la, i just removed it  , i forgot, the stand...  finished... (left side & right side)   HDD cage job done...  |
|
|
Jul 25 2007, 03:10 PM
|
|
Senior Member
836 posts Joined: Sep 2004 From: CyBerJaYa
|
what u all use to polish ur lian li alu casing?
|
|
|
Jul 25 2007, 05:05 PM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
http://www.lian-li.com/product/product06.p...index=46&type=b
This product  Can that device control fan? as well ? anyone has it |
|
|
Jul 25 2007, 05:14 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
ATE got sell it ..
It only supports fan sped monitoring and display but no controlling .. Anyway this topic suppose to be combined with Lian Li's Thread.. |
|
|
Jul 25 2007, 05:14 PM
|
|
Senior Member
1,635 posts Joined: Jan 2003 From: BASF Asia Pacific
|
woah, didnt know about this before.
|
|
|
Jul 25 2007, 05:16 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
U mean clean it or polish it ... ???
|
|
|
Jul 25 2007, 05:25 PM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
ah... so how can i find a fan controller for lian li case .. LoL.. die lor
|
|
|
Jul 25 2007, 05:46 PM
|
|
Senior Member
836 posts Joined: Sep 2004 From: CyBerJaYa
|
QUOTE(Doom @ Jul 25 2007, 05:16 PM) U mean clean it or polish it ... ??? both...my casing now cacat liao...not nice looking. |
|
|
Jul 25 2007, 05:48 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
95% naked ?? so the 5 % is bikini lar ........ hehe.........
i notice ur pc setup is on ur bed, u sleep with ur pc like that ??? judging from the look, it seems u do not need to make any cut whole ........ all u need may be just lengthen some of the wires............ |
|
|
Jul 25 2007, 09:09 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
this device can control fans but not manually la
automaticallylet say ur proc heat up to 60C & ur VGA heat up to 60C then our LiLi TR03 here will summon the device to ram up all the fans that connected to it to run in full speed boleh la for non-OCer |
|
|
Jul 25 2007, 09:12 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
He wants to be able to control it so it must have a knob to do the controlling ..
Since it has no knob .. how to control ??? software control is different from human control ... U could Visit AllITHyper Mall ... they got sell some front bay with fan control and temperature display also... but kind of pricey ,,,, |
|
|
Jul 25 2007, 09:18 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(Hungry_Wolf @ Jul 25 2007, 05:46 PM) both...my casing now cacat liao...not nice looking. Care to show photo how 'cacat' it looks like now .... With photo is easier to suggest what could be done |
|
|
Jul 25 2007, 10:45 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(Hungry_Wolf @ Jul 25 2007, 05:46 PM) both...my casing now cacat liao...not nice looking. Cacat oredi then u go buy new case n gif the old 1 to me lor. I'll bring them back to life with a facelift. Kekekekeke.This post has been edited by ianho: Jul 25 2007, 10:45 PM |
|
|
Jul 26 2007, 01:15 AM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
just bought the LianLi 3.5" Fan Controller..
and did some sleeving job..sorry the result (and the picture quality) wasnt good enough, as i dun have enough black sleeve     |
|
|
Jul 26 2007, 01:26 AM
|
|
Senior Member
836 posts Joined: Sep 2004 From: CyBerJaYa
|
QUOTE(Doom @ Jul 25 2007, 09:18 PM) Care to show photo how 'cacat' it looks like now .... i forget the term, it is sth like iron become rusty but this is alu...With photo is easier to suggest what could be done the hdd cage not nice liao...berkurap.. QUOTE(ianho @ Jul 25 2007, 10:45 PM) Cacat oredi then u go buy new case n gif the old 1 to me lor. I'll bring them back to life with a facelift. Kekekekeke. i cant hear you.... if send for uncle to mod..ok la.. give uncle the whole case...  really cant lo..This post has been edited by Hungry_Wolf: Jul 26 2007, 01:28 AM |
|
|
Jul 26 2007, 08:02 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
scaling izzit, small problem, take some cleaning agent like dish washing detergene wipe it should do the job..............
i tot TR-3 cannot control the fans, just monitor only........ All IT have some aerogate or something, a bit ugly though hehe......and pricey too, better DIY |
|
|
Jul 26 2007, 08:46 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(LExus65 @ Jul 26 2007, 08:02 AM) scaling izzit, small problem, take some cleaning agent like dish washing detergene wipe it should do the job.............. But LL gave the device the name : Temperature Monitor & Fan Controller. I suppose it can control fan speed right?i tot TR-3 cannot control the fans, just monitor only........ All IT have some aerogate or something, a bit ugly though hehe......and pricey too, better DIY |
|
|
Jul 26 2007, 09:27 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
, i'm using the TR-03, well, it shows that it can control the fan speed, but not manually, it's automatically... when the temp reading (from temperature probe) reaches threshold ... has anyone has an idea on how-to removing those stain on aluminium? , my fingerprints all over the place la, i can't leave traces ... |
|
|
Jul 26 2007, 10:41 AM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(sniper69 @ Jul 26 2007, 09:27 AM) has anyone has an idea on how-to removing those stain on aluminium? im using Autosol to clean the stain and to make the alu shining again , my fingerprints all over the place la, i can't leave traces ... |
|
|
Jul 26 2007, 11:10 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(kalakatu @ Jul 26 2007, 10:41 AM) im using Autosol to clean the stain and to make the alu shining again autosol? where you get that? local hardware shop got? |
|
|
Jul 26 2007, 11:15 AM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(sniper69 @ Jul 26 2007, 11:10 AM) autosol? where you get that? local hardware shop got? sorry i dont know..maybe some of hardware shops have it.. my dad bought it when i was a kid..and still can be used now |
|
|
Jul 26 2007, 01:24 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
@kalakatu
that is seriously a long lasting tube of autosol man!!! @sniper69 hardware shops like Ace Hardware should have them i think |
|
|
Jul 26 2007, 04:59 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(Doom @ Jul 25 2007, 09:12 PM) He wants to be able to control it so it must have a knob to do the controlling .. Since it has no knob .. how to control ??? software control is different from human control ... U could Visit AllITHyper Mall ... they got sell some front bay with fan control and temperature display also... but kind of pricey ,,,, if i remember correctly, his/her question in the last (closed) thread that "whether TR-03 can control fan or not" (something like dat la) so i answer the TR-03 can control fans, but & i mean but not manually instead AUTOMATICALLY...so here's the question: (this time read it thoroughly ya ) QUOTE(Kyogezsho @ Jul 25 2007, 05:05 PM) http://www.lian-li.com/product/product06.p...index=46&type=b This product Can that device control fan? as well ? anyone has it
i answered him correctly not giving false facts, not spamming & not confusing him stating TR-03 cannot control fans while it can control fans automatically & a device that controls fan automatically will always & still be known & categorized as a fan controller device just that it won't be categorized under a manual fan controller that got knobs, okay??? QUOTE(Doom @ Jul 25 2007, 09:12 PM) ... software control is different from human control ... yup, it's different BUT did he ask the question whether TR-3 can control fan manually? did he? did he?i guess not, he only ask whether the device can control fan or not, so my answer is yes by software control  QUOTE(LExus65 @ Jul 26 2007, 08:02 AM) ... i tot TR-3 cannot control the fans, just monitor only........ wrong, at first i had the same impression like u --> then i just have to, i have to ask Mr. Google for an answer coz i hate being an ass hole who giving conclusion without providing any proof, so here it is:» Click to show Spoiler - click again to hide... « Read the review & get ur facts right QUOTE(sniper69 @ Jul 26 2007, 09:27 AM) , i'm using the TR-03, well, it shows that it can control the fan speed, but not manually, it's automatically... when the temp reading (from temperature probe) reaches threshold ...has anyone has an idea on how-to removing those stain on aluminium? , my fingerprints all over the place la, i can't leave traces ...just what i'm been talking about, the device can control fan BUT NOT MANUALLY INSTEAD AUTOMATICALLY thanks for clarifying this out man, i hope if another newbie comes here and ask the same question we will able to answer him correctly, not confusing him |
|
|
Jul 27 2007, 12:40 AM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
YAHOOO ~! My case finally done by uncle ho.. waiting for him to post the worklog
heheh i wanna see the process along with pics btw this is wat i can post now taken from my own camera... not as pro as uncle`s godlike skills  btw dont mind the yellow lost wire in the hdd area... just to test if the UV can reach there and thank you uncle ho so much : ) This post has been edited by Kyogezsho: Jul 27 2007, 12:52 AM |
|
|
Jul 27 2007, 01:36 AM
|
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
cool uncle ian every work is a master piece..
look at those shiny cutting.... Mmm wheres teH outake ? |
|
|
Jul 27 2007, 01:43 AM
|
|
Senior Member
1,201 posts Joined: Jan 2003 
|
|
|
|
Jul 27 2007, 01:47 AM
|
|
Senior Member
2,765 posts Joined: Nov 2005 From: **Hornbills**
|
QUOTE(Kyogezsho @ Jul 27 2007, 12:40 AM) YAHOOO ~! My case finally done by uncle ho.. waiting for him to post the worklog sigh..really awesome sidepanel..nice shape heheh i wanna see the process along with pics btw this is wat i can post now taken from my own camera... not as pro as uncle`s godlike skills btw dont mind the yellow lost wire in the hdd area... just to test if the UV can reach there and thank you uncle ho so much : ) summo touch up by him, speechless another great job ian |
|
|
Jul 27 2007, 08:04 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(bioweapon83 @ Jul 27 2007, 01:43 AM) welcome to the club |
|
|
Jul 27 2007, 08:23 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
very very nice indeed...........plan to add any thing more........
btw can take some picture in the dark....... i bet it would be very nice This post has been edited by LExus65: Jul 27 2007, 08:23 AM |
|
|
Jul 27 2007, 11:10 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Very fine piece of craft done by uncle again again and again ... whhehehe
I always enjoy his work and camera photo result as well ... |
|
|
Jul 27 2007, 11:59 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
where did u get that mesh thingy for ur side panel? (the one at the side patent fan)
|
|
|
Jul 27 2007, 01:59 PM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
QUOTE(mADmAN @ Jul 27 2007, 11:59 AM) where did u get that mesh thingy for ur side panel? (the one at the side patent fan) That panel mesh come along with the casing.. the latest lian li all have that mesh... Added on July 27, 2007, 2:07 pm QUOTE(LExus65 @ Jul 27 2007, 08:23 AM) very very nice indeed...........plan to add any thing more........ this is the UV .. but my camera sucks .. and also angle... btw can take some picture in the dark....... i bet it would be very nice wait for uncle ho`s when he post at the worklog later hehei show u this  This post has been edited by Kyogezsho: Jul 27 2007, 02:07 PM |
|
|
Jul 27 2007, 05:02 PM
|
|
Senior Member
1,201 posts Joined: Jan 2003
|
QUOTE(Kyogezsho @ Jul 27 2007, 01:59 PM) That panel mesh come along with the casing.. the latest lian li all have that mesh... Lucky I dont like that so big casing if not sure will nice like yours also... Should I make window on my casing? Added on July 27, 2007, 2:07 pm this is the UV .. but my camera sucks .. and also angle... wait for uncle ho`s when he post at the worklog later hehei show u this |
|
|
Jul 27 2007, 05:24 PM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
sry i dun quite get u mean ..
QUOTE Lucky I dont like that so big casing if not sure will nice like yours also... Should I make window on my casing? |
|
|
Jul 27 2007, 05:36 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
uhlala..........very UV looks.........
makes really want to go get one for myself already, i think once u replace the side fan with a UV 1, it is even better |
|
|
Jul 27 2007, 07:15 PM
|
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
with nice uv colorishes like that sure u can make cool wallpaper..
if u take picture using dslr make it more vivid and lowest ISO sure coool to show off.. |
|
|
Jul 28 2007, 01:49 AM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
too bad i m not good with cameras
|
|
|
Jul 28 2007, 08:53 PM
|
Senior Member
2,524 posts Joined: Jan 2003 From: Beneath the starry night
|
QUOTE(kalakatu @ Jul 26 2007, 01:15 AM) just bought the LianLi 3.5" Fan Controller.. Hey bro, wanna ask how many fans can the controller support?and did some sleeving job..sorry the result (and the picture quality) wasnt good enough, as i dun have enough black sleeve » Click to show Spoiler - click again to hide... « |
|
|
Jul 28 2007, 09:05 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
It should be 3 ... for monitoring purpose ...!!
|
|
|
Jul 29 2007, 12:12 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
guys,
looking for casing for my brother. Does anyone know whether ATE sells PC-A09B?  |
|
|
Jul 29 2007, 12:31 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
called ATE just now...
will get the answer later... * update * he said... "Belum Masuk Malaysia Lagi" This post has been edited by sniper69: Jul 29 2007, 12:32 PM |
|
|
Jul 29 2007, 01:35 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Yap.. there's no new batch of stock currently ..
so no luck .. I'm looking for V350 ... but sadly .. it will take while before the next shipment and don't know whether those cases comes along or not .. |
|
|
Jul 29 2007, 01:56 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
the v350 indeed new product, even my target PC-A70a also... until now, haven't arrive in Malaysia yet
, what took so long la...about the v350, you're looking smaller casing and smaller |
|
|
Jul 29 2007, 02:06 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hhahah of course since it save space and easy to manage ..
but anyway who said I'm getting for myself ... hhahah it's for my gf since she loves but complaint about the V1000's weight.. she can't lifts the case .. .so have to go really small ... Still waiting with dropping jaw nowdays .... |
|
|
Jul 29 2007, 05:21 PM
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
Can the LL 07 hdd cage relocate facing outward like hdd cage of g7?
|
|
|
Jul 29 2007, 05:35 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(Zicron @ Jul 29 2007, 05:21 PM) Can the LL 07 hdd cage relocate facing outward like hdd cage of g7? show us some pics will ya... , IMO, anything can be done... just show us the pic... |
|
|
Jul 29 2007, 05:46 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
dont have the case yet, that y im thinking, if this is possible, i might go for 007..lol
|
|
|
Jul 29 2007, 05:51 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(Zicron @ Jul 29 2007, 05:21 PM) Can the LL 07 hdd cage relocate facing outward like hdd cage of g7? well, the way i see it (browsing the Lian Li site), it can be done through removing those rivets and relocate the HDD cage, this same way as my PC-A10a, i just relocate them for better cable management |
|
|
Jul 29 2007, 11:11 PM
|
|
Junior Member
112 posts Joined: Feb 2006
|
my ah lian pc-07 power button not function anymore. Is there any spare part out there to replace it?
If couldn't be replace, need to get new casing already, please guide me which shop in LYP selling ah lian. thanks |
|
|
Jul 29 2007, 11:17 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(alfa99 @ Jul 29 2007, 11:11 PM) my ah lian pc-07 power button not function anymore. Is there any spare part out there to replace it? If couldn't be replace, need to get new casing already, please guide me which shop in LYP selling ah lian. thanks , repairla, it's not like big damage though your power button, or else, you can always go to ATE at LowYat Plaza...any pictures of the button? |
|
|
Jul 29 2007, 11:40 PM
|
|
Junior Member
112 posts Joined: Feb 2006
|
QUOTE(sniper69 @ Jul 29 2007, 11:17 PM) , repairla, it's not like big damage though your power button, or else, you can always go to ATE at LowYat Plaza...any pictures of the button? the power button inside the casing which used some plastics stuff to hold the power button. the plastic already cracked. |
|
|
Jul 29 2007, 11:51 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(Zicron @ Jul 29 2007, 05:46 PM) dont have the case yet, that y im thinking, if this is possible, i might go for 007..lol can be done....just need to unscrew (yes, screw) the HDD cage and drill out new holes to mount it in a 90deg position.personally....i wouldnt do it. blocks the airflow of the front intake fan. and the HDD wont be getting much or even any cooling from the front intake fan. QUOTE(alfa99 @ Jul 29 2007, 11:11 PM) my ah lian pc-07 power button not function anymore. Is there any spare part out there to replace it? all u need is a momentary switch. u can even use a doorbell switch for it. anyway, just remove the switch and take it to an electronics spare parts store (like those in jalan pasar) and ask them for it. once u have it, just need to cut off the cables from the old stich, connect it to the new one... and ur done.If couldn't be replace, need to get new casing already, please guide me which shop in LYP selling ah lian. thanks |
|
|
Jul 30 2007, 12:03 AM
|
|
Junior Member
112 posts Joined: Feb 2006
|
QUOTE(mADmAN @ Jul 29 2007, 11:51 PM) can be done....just need to unscrew (yes, screw) the HDD cage and drill out new holes to mount it in a 90deg position. thanks for the useful statements. appreciate.personally....i wouldnt do it. blocks the airflow of the front intake fan. and the HDD wont be getting much or even any cooling from the front intake fan. all u need is a momentary switch. u can even use a doorbell switch for it. anyway, just remove the switch and take it to an electronics spare parts store (like those in jalan pasar) and ask them for it. once u have it, just need to cut off the cables from the old stich, connect it to the new one... and ur done. |
|
|
Jul 30 2007, 12:03 AM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
want to ask here, is my pc60 plus II front audio panel is High definition or AC97, lian li website dun have the information.
|
|
|
Jul 30 2007, 01:11 AM
|
|
Senior Member
1,201 posts Joined: Jan 2003
|
QUOTE(Kyogezsho @ Jul 27 2007, 05:24 PM) sry i dun quite get u mean .. I mean I still unsure to cut my side panel and add a window .. Not sure it will look nice or not. |
|
|
Jul 30 2007, 09:01 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(jasonkwk @ Jul 30 2007, 12:03 AM) want to ask here, is my pc60 plus II front audio panel is High definition or AC97, lian li website dun have the information. It should be AC97 rather than High Definition since there's no port to connect woofer and rear speakers... |
|
|
Jul 30 2007, 10:09 AM
|
|
All Stars
12,851 posts Joined: May 2005 From: Puchong, Selangor
|
Normally the front panel sound port is for the headphone plug in.
|
|
|
Jul 30 2007, 07:22 PM
|
Junior Member
366 posts Joined: Jan 2003 From: Look ! BehinD yOu !
|
RawR, im here to join the group since i have my LianLi new toy xD
|
|
|
Jul 30 2007, 08:35 PM
|
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
Welcome to the club
..for myself This post has been edited by kujaboyde: Jul 30 2007, 08:44 PM |
|
|
Jul 30 2007, 08:38 PM
|
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
Welcome to the club
..for myself [attachmentid=269624][attachmentid=269628][attachmentid=269636] This post has been edited by kujaboyde: Jul 30 2007, 08:42 PM |
|
|
Jul 30 2007, 10:48 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
I really love this case and looking forward for V350 ..
there's only one question .... what sort of the cooler u use for CPU ??? I have difficulty choose the right cooler to cool off the CPU without sacrificing performance .. |
|
|
Jul 31 2007, 12:26 AM
|
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
plan to get blue orb,max orb, zalman 8700led, zalman fatality(need to change northbridge cooler to zalman also
), nitrogon also..my giga 86gt need to change cooler coz too big the silent pipe..damn i think i wanna mod this nex month to get better air ventilation coz seems like the side panel fan not enough power to do his job.. This post has been edited by kujaboyde: Jul 31 2007, 12:37 AM |
|
|
Jul 31 2007, 02:39 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Doom, is it posible to get those Anti-vibration rubber rings come from pc-g7 from ATE there? Don't know can use for my case or not.
|
|
|
Jul 31 2007, 02:57 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
I could try to ask ... !!!
|
|
|
Jul 31 2007, 04:37 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Thank you first Doom
If can then nice lol This post has been edited by vincent09: Jul 31 2007, 04:38 PM |
|
|
Jul 31 2007, 05:04 PM
|
|
Senior Member
2,765 posts Joined: Nov 2005 From: **Hornbills**
|
QUOTE(kujaboyde @ Jul 30 2007, 08:38 PM) Welcome to the club hehe nice pv300..btw how ur temp for proc?my fren bought it last weeknd..nice case ..for myself if been modded mite b awesome more This post has been edited by mfcm: Jul 31 2007, 10:46 PM |
|
|
Jul 31 2007, 05:30 PM
|
Junior Member
72 posts Joined: Nov 2006
|
What u fit inside of the case ??? commando ???
|
|
|
Jul 31 2007, 06:46 PM
|
|
All Stars
10,479 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(vincent09 @ Jul 31 2007, 02:39 PM) Doom, is it posible to get those Anti-vibration rubber rings come from pc-g7 from ATE there? Don't know can use for my case or not. what anti-vibration rubber rings? |
|
|
Jul 31 2007, 07:01 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(Skylinestar @ Jul 31 2007, 06:46 PM) what anti-vibration rubber rings? this... , taken from my extra rubber rings... |
|
|
Jul 31 2007, 07:27 PM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(sniper69 @ Jul 31 2007, 07:01 PM) this... sorry for this n00b question: how to use it? , taken from my extra rubber rings... |
|
|
Jul 31 2007, 09:08 PM
|
Senior Member
1,167 posts Joined: Nov 2006
|
do you guys join PC modding competition since u all casing very"geng " le
|
|
|
Jul 31 2007, 09:20 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(kalakatu @ Jul 31 2007, 07:27 PM) sorry for this n00b question: how to use it?    |
|
|
Jul 31 2007, 09:25 PM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
btw i dont tink this rubbers work for the lian li V series right
as theier hdd is slotted in .. btw new update on mine too  |
|
|
Jul 31 2007, 09:34 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
, not sure though... , well... only thing made your pic ugly is... the towel there ... |
|
|
Jul 31 2007, 09:41 PM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
shhhhh .. forgot to take the towel away .. after wiping body wahah
|
|
|
Jul 31 2007, 09:50 PM
|
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
whats that thing on ur WiFi HDD?
|
|
|
Jul 31 2007, 10:00 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(llllNarutollll @ Jul 31 2007, 09:50 PM) whats that thing on ur WiFi HDD? Wifi stickers! |
|
|
Jul 31 2007, 10:27 PM
|
Senior Member
2,295 posts Joined: Jan 2005 From: Penang
|
QUOTE(sniper69 @ Jul 17 2007, 09:21 AM) well... FYI, i'm getting ready for upcoming PC-A70a which is currently not available in ATE... wow... good casing there, planning to get 1 if got the $$$, been googling around the photo of the case, seems spacious enough for water cooling setup, can mount it either behind the case as there are prebuilt holes for tubings, or cut the bottom and mount it at the bottom. how u all think bout this case? |
|
|
Aug 1 2007, 09:35 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Hmm, is that anti vibration ring can use for case fan?
|
|
|
Aug 1 2007, 09:47 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
It should be the same if not mistaken ... never noticed it ..
in order to use the o-ring ... there's need to cut hole to fit in nicely ... |
|
|
Aug 1 2007, 10:17 AM
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
looks like for V300, longer Gc like x2600xt can't fit in...
love the design so much!! edit: just realize,looks like for V350 they upgrade the front intake to 2 x 120mm... and also got removable fan module..... i think in v350, it can fit longer Gc... This post has been edited by rainingzero: Aug 1 2007, 10:23 AM |
|
|
Aug 1 2007, 11:32 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
Kyogezsho, how many hdd are u running ?? btw the stickers might not do the job well...... a bit questining on the effects........
just an idea, may be u should try UV reactive casing for the hdd instead (like those fans 1).... may be i should do the same too it seems uncle and Kyogezsho is addicted to Wifi hdd ideas already hehe..... |
|
|
Aug 2 2007, 01:53 AM
|
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
QUOTE(LExus65 @ Aug 1 2007, 11:32 AM) Kyogezsho, how many hdd are u running ?? btw the stickers might not do the job well...... a bit questining on the effects........ lexus right that WiFi stickers just an idea, may be u should try UV reactive casing for the hdd instead (like those fans 1).... may be i should do the same too it seems uncle and Kyogezsho is addicted to Wifi hdd ideas already hehe..... looks ugly on thats case its ruined the sleeping forest itself..try some other UV idea.. |
|
|
Aug 2 2007, 03:48 AM
|
Junior Member
310 posts Joined: Jun 2006
|
wanna see more pictures on updates. The stickers are not that bad la actually. Change everything to uv reactive with acryllic
|
|
|
Aug 2 2007, 08:55 AM
|
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
QUOTE(any1else87 @ Aug 2 2007, 03:48 AM) wanna see more pictures on updates. The stickers are not that bad la actually. Change everything to uv reactive with acryllic yea its not that bad but the square look make it bad .. |
|
|
Aug 2 2007, 09:10 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(vincent09 @ Jul 31 2007, 04:37 PM) Thank you first Doom I have gone back with no positive result.. If can then nice lol Lian Li does not produce the o-ring as accessory...so there's no official route of getting it ... QUOTE(rainingzero @ Aug 1 2007, 10:17 AM) looks like for V300, longer Gc like x2600xt can't fit in... I'm playing with V300 now ... love the design so much!! edit: just realize,looks like for V350 they upgrade the front intake to 2 x 120mm... and also got removable fan module..... i think in v350, it can fit longer Gc... will upload some photo once finished with the setup ... |
|
|
Aug 2 2007, 03:28 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Is ok la about that bad news XD. Doom XD.
Just want to add something for my casing XD. |
|
|
Aug 2 2007, 06:14 PM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
hey guys...
will ATE be at the KLCC PC Fair? mayb wanna get some accessories for my Ah Lian.. |
|
|
Aug 2 2007, 07:03 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Yah there are located at 2nd hall ...
Anwyay V300 with simple cable management and fan changes only ... so cute !!!     Hardware Spec: AM2 Athlon X2 4400+ @Artic Cooling Alphine 7 Asus M2A-VM HDMI 1GB Corsair DDR2 667 Samsung Spin Point 250 GB SATA 2 8 MB HEC Ace Power 480 Watt Asus DVD-ROM Case Fans: CM 8 CM Silent LED Fan, CM 8 CM Silent Case Fan ... |
|
|
Aug 2 2007, 09:01 PM
|
|
Senior Member
2,597 posts Joined: Mar 2005 From: Kuala Lumpur
|
QUOTE(james2306 @ Aug 2 2007, 06:14 PM) hey guys... last pc fair ATE never bring any LL stuff to pc fair.will ATE be at the KLCC PC Fair? mayb wanna get some accessories for my Ah Lian.. this week ATE LYP got open?? |
|
|
Aug 2 2007, 10:04 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Sure got open 1, for what i think
Everytime ATE go anywhere, the shop still open 1 |
|
|
Aug 3 2007, 08:03 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
doom can a full size graphic card fit inside ?? those normal 8600series size
|
|
|
Aug 3 2007, 08:18 AM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(Doom @ Aug 2 2007, 07:03 PM) Yah there are located at 2nd hall ... Doom, you beli casing lagi ka? Anwyay V300 with simple cable management and fan changes only ... so cute !!! |
|
|
Aug 3 2007, 08:18 AM
|
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
doom if i have that casing on the floor at my home sure my brother will think it is a bling2 chair and sit on it...
is that casing though enough to sit on it? |
|
|
Aug 3 2007, 02:41 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(sHawTY @ Aug 3 2007, 08:18 AM) Doom, you beli casing lagi ka? ye la tu... katanya for his girlfriend QUOTE(llllNarutollll @ Aug 3 2007, 08:18 AM) doom if i have that casing on the floor at my home sure my brother will think it is a bling2 chair and sit on it... though? or is it tough is that casing though enough to sit on it? , anyway... from the look, i think a full size graphic card should be a problem... (as you are saying 8600 series) unless... gigantic 8800 series... |
|
|
Aug 3 2007, 03:13 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
sit on it..........wah..bling bling chair ..........hehe i think ur brother will be the bling bling one later on after u found out that he actaully sit on it,
i like the front looks.........with a LCD monitor on top of it even better |
|
|
Aug 3 2007, 05:51 PM
|
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
QUOTE(LExus65 @ Aug 3 2007, 03:13 PM) sit on it..........wah..bling bling chair ..........hehe i think ur brother will be the bling bling one later on after u found out that he actaully sit on it, lol ya right..anyway this case has good airflow right? |
|
|
Aug 3 2007, 06:16 PM
|
|
All Stars
10,479 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(Doom @ Aug 2 2007, 07:03 PM) Yah there are located at 2nd hall ... ATE has booth in pc fair? lianli for sale in pc fair? which ATE staff will be there? |
|
|
Aug 3 2007, 09:53 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(sHawTY @ Aug 3 2007, 08:18 AM) Doom, you beli casing lagi ka? yah .... for my gf ... but I got to play with it for while ... QUOTE(sniper69 @ Aug 3 2007, 02:41 PM) ye la tu... katanya for his girlfriend you are right ,,,,,, it can't fit in any mid range card ... though? or is it tough , anyway... from the look, i think a full size graphic card should be a problem... (as you are saying 8600 series) unless... gigantic 8800 series... QUOTE(LExus65 @ Aug 3 2007, 03:13 PM) sit on it..........wah..bling bling chair ..........hehe i think ur brother will be the bling bling one later on after u found out that he actaully sit on it, hmmm too bad it can't coz there's no room to fit in the LCD display ..i like the front looks.........with a LCD monitor on top of it even better QUOTE(llllNarutollll @ Aug 3 2007, 05:51 PM) lol ya right.. pretty nice enough for standard setup ... anyway this case has good airflow right? QUOTE(Skylinestar @ Aug 3 2007, 06:16 PM) ATE has booth in pc fair? lianli for sale in pc fair? which ATE staff will be there? yah too bad only sell Viewsonic, Lexmark, Razer and Sony stuffs... |
|
|
Aug 4 2007, 01:00 AM
|
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
ur gf dont want graphic card?
|
|
|
Aug 4 2007, 09:16 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
This mobo already built in with ATI X1250 ...
can play dota already men .. of course she doesn't play .... as long as can watch video in good quality she's more than happy .. |
|
|
Aug 4 2007, 11:53 AM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
doom,ur v300 is very nice la.....plus with white LED fan....damn!!
err...that HEC PSU got led ar? sweeeet!!! |
|
|
Aug 4 2007, 02:56 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
yah .. it comes with blue color ...
the only down side is not much of cooler selection and gc ... so it only work for poeple that aren't into gaming ... paper work, video and so on ... however if cut the side panel with a 9 cm blow hole .. hhehehe .. then u could add in a nice graphic card without running into heat problem ..much .. but also under the condition of cutting the floppy drive bay away to accomodate the graphic card length ... other than that.. it's really a lovely case for non serious gamer ... I would probabaly make some LED light at the front of the case if possible .. still checking the room clearance .. actually more like continuing with my A05 mod now ... hhaha |
|
|
Aug 4 2007, 09:37 PM
|
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
at sg now..wanna find a nice fan and new mAtx casing for my 2nd rig xD..
who wanna order something PM me ok lol.. <---dun marah me |
|
|
Aug 4 2007, 10:01 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(kujaboyde @ Aug 4 2007, 09:37 PM) at sg now..wanna find a nice fan and new mAtx casing for my 2nd rig xD.. I would like for u to go to Uglyvamp's shop in Sim Lim Square n bring back the whole shop for us. who wanna order something PM me ok lol.. <---dun marah me |
|
|
Aug 5 2007, 02:39 AM
|
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
hahaha i cannot find uglyvamp shop leh.. give me name loh..faster liao
sounds crazy if i shout loud "where is uglyvamp shop" or "who knows uglyvamp??" This post has been edited by kujaboyde: Aug 5 2007, 02:40 AM |
|
|
Aug 5 2007, 03:51 AM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(kujaboyde @ Aug 5 2007, 02:39 AM) hahaha i cannot find uglyvamp shop leh.. give me name loh..faster liao very easy to find 1. it's lot 3.19. Just ask teh info counter n they will tell u where.sounds crazy if i shout loud "where is uglyvamp shop" or "who knows uglyvamp??" |
|
|
Aug 5 2007, 08:26 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
if u can bring the whole shop back, ........everyone will be drooling , may be u can try his website, got clear directions there
|
|
|
Aug 5 2007, 08:56 AM
|
|
Senior Member
2,597 posts Joined: Mar 2005 From: Kuala Lumpur
|
QUOTE(kujaboyde @ Aug 5 2007, 02:39 AM) hahaha i cannot find uglyvamp shop leh.. give me name loh..faster liao sounds crazy if i shout loud "where is uglyvamp shop" or "who knows uglyvamp??" QUOTE(ianho @ Aug 5 2007, 03:51 AM) very easy to find 1. it's lot 3.19. Just ask teh info counter n they will tell u where. i think uv nium shifted liao, last 2 months i went there, gary tell me they wanted to shift. http://www.uvnium.com/uvshop/ |
|
|
Aug 5 2007, 03:47 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
Correct lor. See the lot # I put above? 3.19 is the new shop. I went there about 3 weeks ago.
|
|
|
Aug 7 2007, 02:10 AM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
1)where should put your thermocouple with sys-R and sys-f?
2) how to disbale cpu fan error ,because i take the cpu fan connector connect to the lian li fan controller? |
|
|
Aug 7 2007, 02:15 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(jasonkwk @ Aug 7 2007, 02:10 AM) 1)where should put your thermocouple with sys-R and sys-f? 1) thermal probe? both i put on HDD and PWM IC2) how to disbale cpu fan error ,because i take the cpu fan connector connect to the lian li fan controller? 2) usually in the BIOS, there's a setting to disable it |
|
|
Aug 7 2007, 04:02 AM
|
Senior Member
871 posts Joined: Jun 2005 From: A Galaxy Far Far Away...
|
uglyvamp's shop is in sim lim square? i was at sim lim a couple of days ago and i didn't spot it
This post has been edited by Ryo: Aug 7 2007, 04:03 AM |
|
|
Aug 7 2007, 05:26 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm everyone is so exicted about gary's new shop location ..
but is it relevant to this topic .. hmmm ... |
|
|
Aug 9 2007, 12:41 AM
|
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
im back.. tot can buy some fan but times runnig out when i left suntec arghhhhh rugi didnt buy on 1st day
|
|
|
Aug 9 2007, 12:43 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
aio .. too bad ...Sun Tech is really a nice place for girl's shopping spree..
being there every time when got to SG.. There's more fans selection over SLS than LYP.. I got my Artic Cooling fans from there... few months back .. |
|
|
Aug 9 2007, 09:16 AM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(Doom @ Aug 9 2007, 12:43 AM) aio .. too bad ...Sun Tech is really a nice place for girl's shopping spree.. Best thing about SLS is u see Lian Lis n Silverstones everywhere. Not like in KL, always see oni icutes n powerlogics everywhere. being there every time when got to SG.. There's more fans selection over SLS than LYP.. I got my Artic Cooling fans from there... few months back .. |
|
|
Aug 9 2007, 10:06 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(ianho @ Aug 9 2007, 09:16 AM) Best thing about SLS is u see Lian Lis n Silverstones everywhere. Not like in KL, always see oni icutes n powerlogics everywhere. true....we also have to take into account the living standard in Singapore and Malaysia. For example , average fresh grad. engineers in Spore is earning S$2500 while here in malaysia is RM2500. Therefore, when Singaporeans go out for shopping, they see the price tag for typical midrange casing such as Lian Lis/Silverstone as S$200~ while here in Malaysia we see the same price tags "digits" for powerlogics/icute for RM200. So, there goes for our choice for better products in the market....so sad.... |
|
|
Aug 9 2007, 11:50 AM
|
|
Junior Member
102 posts Joined: Nov 2006 From: Sabak Bernam Town
|
QUOTE(blessedvillain @ Aug 9 2007, 10:06 AM) true....we also have to take into account the living standard in Singapore and Malaysia. For example , average fresh grad. engineers in Spore is earning S$2500 while here in malaysia is RM2500. Therefore, when Singaporeans go out for shopping, they see the price tag for typical midrange casing such as Lian Lis/Silverstone as S$200~ while here in Malaysia we see the same price tags "digits" for powerlogics/icute for RM200. So, there goes for our choice for better products in the market....so sad.... DO U MEAN IN SINGAPORE LIAN LI CASING IS CHEAP? |
|
|
Aug 9 2007, 12:36 PM
|
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
lian li not tat cheap..i think same price..silverstone is cheaper if we can avoid tax..i almost grab microfly but when think about kastam i GG'ed..haha
This post has been edited by kujaboyde: Aug 9 2007, 12:37 PM |
|
|
Aug 9 2007, 01:11 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(llllNarutollll @ Aug 9 2007, 11:50 AM) DO U MEAN IN SINGAPORE LIAN LI CASING IS CHEAP? hahaha...nope...it's roughly the same price if converted to RM. i'm saying that Singapore has more choice for higher end's models due to their living standards. |
|
|
Aug 9 2007, 02:12 PM
|
|
Senior Member
2,765 posts Joined: Nov 2005 From: **Hornbills**
|
QUOTE(kujaboyde @ Aug 9 2007, 12:36 PM) lian li not tat cheap..i think same price..silverstone is cheaper if we can avoid tax..i almost grab microfly but when think about kastam i GG'ed..haha haha cannot wrap it then said it as present or gift ek? can avoid tax leh |
|
|
Aug 9 2007, 02:27 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(kujaboyde @ Aug 9 2007, 12:36 PM) lian li not tat cheap..i think same price..silverstone is cheaper if we can avoid tax..i almost grab microfly but when think about kastam i GG'ed..haha no problem wan la.....i got the microfly in Sim Lim and i drove thru the customs in Tuas (the new causeway).PC hardware no tax one ler.....when i drove thru they just asked me to open the box and remove all contents... they check got nuttin and all kow tim. even my GT PC-7 case oso i bought from singpore...brought back thru sepang airport...lagi syiok..they just asked whats in the box... i said PC case and they let me thru...didnt even check oso. |
|
|
Aug 9 2007, 10:57 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(ianho @ Aug 9 2007, 09:16 AM) Best thing about SLS is u see Lian Lis n Silverstones everywhere. Not like in KL, always see oni icutes n powerlogics everywhere. Yah I definitely agree on it .. if possible I would like to go again before left to UK next month .... QUOTE(llllNarutollll @ Aug 9 2007, 11:50 AM) DO U MEAN IN SINGAPORE LIAN LI CASING IS CHEAP? It's about the same .. only expensive by slightly QUOTE(kujaboyde @ Aug 9 2007, 12:36 PM) lian li not tat cheap..i think same price..silverstone is cheaper if we can avoid tax..i almost grab microfly but when think about kastam i GG'ed..haha I would said LL is cheaper for lower end series .. RM238 for a full aluminum case ... QUOTE(mADmAN @ Aug 9 2007, 02:27 PM) no problem wan la.....i got the microfly in Sim Lim and i drove thru the customs in Tuas (the new causeway). Yah .. I brought back the GT-7 case and some casing fans, DVDs and so on .. never even got inspected .. PC hardware no tax one ler.....when i drove thru they just asked me to open the box and remove all contents... they check got nuttin and all kow tim. even my GT PC-7 case oso i bought from singpore...brought back thru sepang airport...lagi syiok..they just asked whats in the box... i said PC case and they let me thru...didnt even check oso. I was lucky I guess.... |
|
|
Aug 9 2007, 11:28 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(Doom @ Aug 9 2007, 10:57 PM) Yah I definitely agree on it .. if possible I would like to go again before left to UK next month .... Dont worry, PC World is everywhere n u can always go Tottenham Court Road to look for PC stuff. U wont be deprived of PC gear. Oni prob is u wont be getiing ur beloved Lian Lis there. Oni the Online specialist shops have it but I'm sure the price is gonna be hell. |
|
|
Aug 9 2007, 11:30 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmmm .it won't be as fun as shopping at ATE any more mah ..
always can chat with the guys around and meet up with some of the forumers .... Lonely ..... hahhah |
|
|
Aug 11 2007, 02:48 AM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
 anyone know what this do? |
|
|
Aug 11 2007, 04:36 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
PC stuff in UK is expensive ler....
but one thing though...u can get the Akasa Eclipse-62 there. almost all online shops have it. how i wish i could get one though...my closest to perfect case |
|
|
Aug 11 2007, 09:23 AM
|
|
All Stars
10,479 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(jasonkwk @ Aug 11 2007, 02:48 AM) anyone know what this do? that's the thing attach to the back of PSU. to direct the airflow sideways instead of backward |
|
|
Aug 11 2007, 09:45 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
That psu air cover very nice to use XD. But sometime need to see is it your psu switch blocking there, like mine. I just cut a small area to fit in there.
|
|
|
Aug 11 2007, 07:30 PM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
QUOTE(Skylinestar @ Aug 11 2007, 09:23 AM) that's the thing attach to the back of PSU. to direct the airflow sideways instead of backward that thing is too small to attach to my PSU.It come with my PC60 plus II casing. |
|
|
Aug 11 2007, 09:51 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
It should be able but it depends where does ur power socket cord line out ...
|
|
|
Aug 11 2007, 11:12 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
jasonkwk, make sure 1 thing, I'm also same casing as yours, If look at behind the casing, the air will go to right hand side. Firstly i also thought it can't apply because cable, after i look awhile then only know i apply wrong side. For my case is althought i apply right side, but the PSU switch is blocking there, so i cut off abit area then only can apply.
|
|
|
Aug 11 2007, 11:23 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
that's the issue my friend had with his B20 also, one have to cut away a bit of plastic to let the PSU switch through ...
which is ridiculous ..... |
|
|
Aug 12 2007, 07:42 PM
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(Skylinestar @ Aug 11 2007, 09:23 AM) that's the thing attach to the back of PSU. to direct the airflow sideways instead of backward izzit? i tot it use as veil for psu when not in using |
|
|
Aug 12 2007, 11:12 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Last time my pc is let ppl install ( direct buy case and let ppl install it ), when i at home and open my case and c, i c some LianLi casing accssory there, 1 of them is that psu cover, i also no idea what is it, after i ask here then only know, then i blame ( in my heart ) ask y that install ppl didnt help me put, after i try...... only know the switch kacau there ..... Luckly no direct ask them y.
|
|
|
Aug 13 2007, 03:12 AM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
Thanks to UNcle Ho .. i m gonna DHL my lian li to UK
hahah its too nice to leave in msia |
|
|
Aug 13 2007, 09:30 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
yah .. too bad I'm not bringing mind coz I don't want to carry so many things ..
will run the system naked for while over there before getting a suitable case over there.. . |
|
|
Aug 13 2007, 10:02 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
last time i brought my laptop to overseas cos worry of carrying too much... hahaha, but then later i found out that they have extremely cheap,high end,quality, and very quiet CPU (w/o monitor,keyboard) selling in those hypermarket!! Do look out for those....
In the end, i end up purchasing another new PC there.... ....From my experience, the components there are expensive but they do have very special online promos once in awhile... Edited : I bought my CPU from this shop ---> LiDL. It's a convenient store but they do sell CPU once in a while and it's damn good system as they list down the internal components in details. The shop is everywhere, even in smaller towns. Check out the website from time to time. But you need to line up early at 7+am (shop opens at 8am there) to grab it. They have very limited stock each time for each outlet. This post has been edited by blessedvillain: Aug 13 2007, 10:08 AM |
|
|
Aug 13 2007, 09:17 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
ic ic don't worry I would bring my babe to there just without case only ..
hopefully could get a LL case over there without much hassle ... |
|
|
Aug 13 2007, 11:07 PM
|
|
Junior Member
195 posts Joined: Sep 2005 From: United Kingdom
|
lol DOOM which part of UK u going ?
btw i m gonna DHL mine .. no way i m carrying a 15kg computer lol |
|
|
Aug 14 2007, 12:54 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Conventry .... a bit further up from London
I'm thinking of getting WC kit once there and a new case to built the setup .. of course LL would be my first choice .... fanboyz I guess ... hahah just kidding .. actually it's because LL case is cheapest among all other full alu cases ... . |
|
|
Aug 14 2007, 12:19 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
if one of the lian li LED lights is out, can i claim from ATE..
|
|
|
Aug 14 2007, 01:24 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
U mean the case or case fan ??? if case probably u could claim for it ..
if case fan ... then there's no choice .. |
|
|
Aug 14 2007, 02:56 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
opps...i mean the case fan...today only i realized it went off....
|
|
|
Aug 14 2007, 04:29 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
too bad ,, u can't get replacement for the fan ...
since there's no warranty for the case fan .. if u need one ... can PM me ... |
|
|
Aug 15 2007, 07:43 PM
|
|
Senior Member
875 posts Joined: Oct 2004 From: Selayang, Selangor
|
Just wonder you guys know the specification of the 120mm fan that comes together Lian Li casing? How many RPM, CFM and Noise?
|
|
|
Aug 15 2007, 09:37 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Basically there's no official spec coz different model of their case uses different fans ...
|
|
|
Aug 15 2007, 11:05 PM
|
|
Senior Member
875 posts Joined: Oct 2004 From: Selayang, Selangor
|
I am using V1200. I saw all of them are in black color. No bling bling fan.
doom, do you know? I am thinking to switch all of them (4 units) into Vizo Startlet UV Led fan. Do you think worth the spending? This post has been edited by ahsiah: Aug 15 2007, 11:12 PM |
|
|
Aug 15 2007, 11:20 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Changing all those to VIZO will add some bling bling for sure ... and some more airflow .. in the same time more noise ..
It depend of ur tolerant level with noise .. I can't live with either stock LL fan nor VIZO ... just too loud for me since I run my PC in AC room in silent mode.. I would suggest to grab some Panaflo fan if possible or there's any luck on 2nd hand Nortua fan.. My experience with all these fans comes to a conclusion .. Nortua the best for silent yet with strong airflow.. |
|
|
Aug 15 2007, 11:25 PM
|
|
Senior Member
875 posts Joined: Oct 2004 From: Selayang, Selangor
|
Right now, the stock Lian Li fan still ok to me.
I guess not much different compare to Vizo fan (noise). I think I will try one unit and see. Noctua is too expensive to me. more more no bling bling (UV LED). Thanks. |
|
|
Aug 15 2007, 11:28 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm actually u could try some bling bling fans from LPS shop located at SS15 .. .
there are few 12cm bling bling fans that works quiet well without too much of noise increment .. |
|
|
Aug 16 2007, 02:56 AM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
where is to put this thing into?   |
|
|
Aug 16 2007, 09:30 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(jasonkwk @ Aug 16 2007, 02:56 AM) » Click to show Spoiler - click again to hide... « where is to put this thing into? » Click to show Spoiler - click again to hide... « , or else, we have to mod it to make way for the cable |
|
|
Aug 16 2007, 12:40 PM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
QUOTE(sniper69 @ Aug 16 2007, 09:30 AM) i believe the cover is use to provide "sound proof" to your PSU, but the way i see it, the cover giving hard time to install on normal situation - meaning, if only we have L-shape power cable connector L shape power connector? what is it look like?, or else, we have to mod it to make way for the cable ohhh, I need to soundproof my CPU fan, not my PSU.my CPU fan is the most noisy componet in my rig. |
|
|
Aug 16 2007, 01:27 PM
|
Senior Member
590 posts Joined: Jan 2003 From: small town
|
QUOTE(jasonkwk @ Aug 16 2007, 12:40 PM) L shape power connector? what is it look like? http://www.lian-li.com/product/20070409203245.jpgohhh, I need to soundproof my CPU fan, not my PSU.my CPU fan is the most noisy componet in my rig. This the L connector that he taking about, right? Cheers |
|
|
Aug 16 2007, 03:55 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
Aiyooo what L shape plug? The 2nd pic. Just mount the exhaust shroud with the exit pointing to the right side of the pic.
|
|
|
Aug 16 2007, 11:59 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
jasonkwk No need get that L-shape power connector, that is not your problem there.
I have tell that, when u c behind at the power box there, the air is coming out from your right hand side mean > [ power cable] [ switch] ----------> air . after apply the cover didn't cover the power cable area, you just need to comfirm that is it the switch is blocking you when after u apply it. OMG... You are using same powerbox with me..... You should cut out abit area. If needed i take picture for you. When you apply the cover pls don't turn on the pc because if the switch blocking, it will switch off when u apply it because of blocking. This post has been edited by vincent09: Aug 17 2007, 12:04 AM |
|
|
Aug 17 2007, 12:17 AM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
QUOTE(vincent09 @ Aug 16 2007, 11:59 PM) jasonkwk No need get that L-shape power connector, that is not your problem there. thanks for your PM.I have tell that, when u c behind at the power box there, the air is coming out from your right hand side mean > [ power cable] [ switch] ----------> air . after apply the cover didn't cover the power cable area, you just need to comfirm that is it the switch is blocking you when after u apply it. OMG... You are using same powerbox with me..... You should cut out abit area. If needed i take picture for you. When you apply the cover pls don't turn on the pc because if the switch blocking, it will switch off when u apply it because of blocking. Powerbox? you mean PSU? I try many different way, But I cant fit the thing in.If you can take a picture.1000 thanks in advance.  |
|
|
Aug 17 2007, 12:44 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
This is my power box
Cover 
Top view of the cover can u c that icon <--- open close ----> When u apply, u just apply it propelly then push to -----> to lock it, if want open just push <---- will unlock 
After install 
This post has been edited by vincent09: Aug 17 2007, 01:05 AM |
|
|
Aug 17 2007, 01:00 AM
|
|
Senior Member
590 posts Joined: Jan 2003 From: small town
|
bought a Ah Lian V300 last month, simply took some picture with my handphone. Sorry for the low quality pix.. hehe
Ah Lian Black V300  Side view, still trying to improve the cable management there..  trade my stock intel heatsink with my customer... the heatsink height is 9.6cm, hav to apply the heatsink inside the case cuz the heatpipe blocked when slide into the tray, extra 2mm.. tsk tsk  |
|
|
Aug 17 2007, 01:16 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
|
|
|
Aug 17 2007, 01:21 AM
|
|
All Stars
10,596 posts Joined: Jan 2003 From: Hinamizawa
|
QUOTE(vincent09 @ Aug 17 2007, 12:44 AM) This is my power box thanks for your pictures
Cover
Top view of the cover can u c that icon <--- open close ----> When u apply, u just apply it propelly then push to -----> to lock it, if want open just push <---- will unlock
After install
1000 thanks |
|
|
Aug 17 2007, 01:29 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Your welcome
My case is the switch blocking there so my cover need to cut abit to fit in there. Hope can help you by those photo. |
|
|
Aug 17 2007, 01:44 AM
|
|
Senior Member
590 posts Joined: Jan 2003 From: small town
|
QUOTE(Doom @ Aug 17 2007, 01:16 AM) on top of the heatsink got written some word, brand: Foxconn, model: (*forgot )Xigmatek got small size model? Im interested to get one if hav.. hehe |
|
|
Aug 17 2007, 02:10 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hahhaha ,,, just a wild guess mah .. since it looks pretty similar at the first look ,,
of course it isn't since the smallest xigmatek cooler is around 9 cm ++ definitely not small enough to fit in ... |
|
|
Aug 18 2007, 08:08 AM
|
Junior Member
127 posts Joined: Dec 2005 From: In between Bukit Belacan n KL
|
anybody using pc-b20b? is it quiet? I'm trying to built a slightly quiet/quiet pc.
|
|
|
Aug 18 2007, 12:59 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
I have helped my friend to built his B20 system ...
it's really a quiet system if matches with silent cooler .. . The side panel works really well ...there's significant different before and after closing the side panels.. It really run quiet ... |
|
|
Aug 19 2007, 03:16 AM
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
Rejoining the Ah Lian club after such a long time....
Have already migrated from the Akasa Eclipse62 to .... PC-A05B Downsizing ... boh pien. Some thoughts about the PC-A05B Pros: - Sexy giler - Good cooling for CPU. Running my Ultra 120 fanless now - Relatively cheap - Very quiet after swapping the stock fans with Scythe S-Flex - Thin panels but no vibration thanks to those plastic stubs and those thin metal bouncing thingy (don't know what you call it) that holds the sidepanels. - Did I say it's SEXAAAAYYYY? Cons: - The side panel is really ridiculously thin. I think 0.8mm alu. Lian Li these days really cost down - Gets very toasty for the VGA. Oven in disguise. - HDD's gets very toasty as hot air is exhaust out via the HDD's. - Front exhaust are quite restricted hence another exhaust is needed to rid the hot air fast enough... something like a blower or Lian Li's patent fan Tidbits: - At default, the case is running positive air pressure - Front panel are 1.2mm alu Edited to reflect recent discoveries. This post has been edited by sniper on the roof: Aug 20 2007, 01:01 AM |
|
|
Aug 19 2007, 05:41 AM
|
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
how much for the PC-A05B??
|
|
|
Aug 19 2007, 06:49 AM
|
Junior Member
387 posts Joined: May 2007 From: Pahang,Sentul,MMU Malacca
|
If i wanna get a mini casing(like Antec SuperLanboy),Black in colour..which Lian-Li should i get?
|
|
|
Aug 19 2007, 09:10 AM
|
|
Junior Member
127 posts Joined: Dec 2005 From: In between Bukit Belacan n KL
|
QUOTE(Doom @ Aug 18 2007, 12:59 PM) I have helped my friend to built his B20 system ... thanks doom. at last a personal experience with b20. it's really a quiet system if matches with silent cooler .. . The side panel works really well ...there's significant different before and after closing the side panels.. It really run quiet ... What silent cooler do u recommend? I'm quite lost here |
|
|
Aug 19 2007, 11:15 AM
|
Senior Member
5,065 posts Joined: Jan 2003 From: Taman Tun, KL
|
QUOTE(sniper on the roof @ Aug 19 2007, 03:16 AM) Rejoining the Ah Lian club after such a long time.... Ah you finally decided eh. Have already migrated from the Akasa Eclipse62 to .... PC-A05B Downsizing ... boh pien. Some thoughts about the PC-A05B Pros: - Sexy giler - Good cooling for CPU. Running my Ultra 120 fanless now - Relatively cheap - Very quiet after swapping the stock fans with Scythe S-Flex Cons: - The side panel is really ridiculously thin. I think 0.8mm alu. Lian Li these days really cost down - Gets pretty toasty for the VGA Not bad, can buy high-end S-Flex fans too lol, how much did those cost over at Taiwan? Isn't there a intake vent right next to the VGA area? |
|
|
Aug 19 2007, 02:01 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(evilnickwong @ Aug 19 2007, 11:15 AM) Ah you finally decided eh. I got my S-flex's from NSX_MY... Taipei selling around RM65.Not bad, can buy high-end S-Flex fans too lol, how much did those cost over at Taiwan? Isn't there a intake vent right next to the VGA area? Right now playing with some ducting to improve the CPU temps.... at stock it hits 81C on TAT which is a lil too toasty Probably will get the side fan next week for the vga lor. Edit: Some findings... - Adding a duct (non-airtight.. no camera now) to direct air from rear intake to heatsink gives about 5-6C reduction in TAT load temps. - The PC-A05 by itself is positive air pressure. It could use another exhaust somewhere. This post has been edited by sniper on the roof: Aug 19 2007, 03:46 PM |
|
|
Aug 19 2007, 05:49 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(sniper on the roof @ Aug 19 2007, 03:16 AM) Rejoining the Ah Lian club after such a long time.... gee.....now im wondering 2 things....Have already migrated from the Akasa Eclipse62 to .... PC-A05B Downsizing ... boh pien. Some thoughts about the PC-A05B Pros: - Sexy giler - Good cooling for CPU. Running my Ultra 120 fanless now - Relatively cheap - Very quiet after swapping the stock fans with Scythe S-Flex Cons: - The side panel is really ridiculously thin. I think 0.8mm alu. Lian Li these days really cost down - Gets pretty toasty for the VGA 1/ When is ur Eclipse 62 coming back to KL with u?? 2/ Best price how much ??? |
|
|
Aug 19 2007, 11:50 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
Got back the camera so it's pic time.
1) Some prerequisite frontal... so sexy  2) The biggest sell point (for me at least) and also the biggest issue is the black box look. This means that while the rear intake is pretty good, its front exhaust is quite seriously restrictive and could use all the help it can get. While some folks on the web tape the gap between the empty 3" and 5" bay covers to prevent the hot air from recycling inside.... you can also use the packing styro foam instead. It's free.... it's easy to work with.. it takes just 5 seconds.  3) Here you see the gaps filled.  4) The ugly side. I love my Seasonic S12 to death but the damn cables are just crazy  5) The obligatory full monty shot. I used a cheapo evercool blower as a stop gap measure to take care of the exhaust problem. This translate to a 8C reduction in VGA temps. Also my ghetto duct fashion from a plastic folder file from rear intake to the now fanless Ultra 120 --> Duct vs no duct = 6C reduction in TAT load temps.  Edit: Madman... the Akasa have to sit in basement until find new owner lor. When you wanna come to Taipei? This post has been edited by sniper on the roof: Aug 20 2007, 12:10 AM |
|
|
Aug 20 2007, 12:12 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(kujaboyde @ Aug 19 2007, 05:41 AM) how much for the PC-A05B?? RM348 for black and RM10 lower for silver color.QUOTE(The Scent LYN @ Aug 19 2007, 06:49 AM) If i wanna get a mini casing(like Antec SuperLanboy),Black in colour..which Lian-Li should i get? A05 would be a nice one .. it's small but can fit in 8800GTX nicely .... QUOTE(kriel @ Aug 19 2007, 09:10 AM) thanks doom. at last a personal experience with b20. Those passive cooler or cooler with silent fan .. such as Artic Cooling Freezer Pro 7/64What silent cooler do u recommend? I'm quite lost here as for passive cooler ... Thermalright HR-01 ... |
|
|
Aug 20 2007, 12:17 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
@sniper
nice cable management job , from what i see, the CPU area indeed in good air circulation, how about the GPU area? looks alike traped? |
|
|
Aug 20 2007, 12:55 AM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(sniper69 @ Aug 20 2007, 12:17 AM) @sniper I was chatting with NSX_MY about the very same topic....nice cable management job , from what i see, the CPU area indeed in good air circulation, how about the GPU area? looks alike traped? The cons of the PC-A05B is that the vga area is .... an oven in disguise. So definately have to find some sort of exhaust for that area.. either side panel fan like Doom or at least a blower. |
|
|
Aug 20 2007, 01:02 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
but i can see that you can also fit the BS-02/BS-03 there...
, not sure it would help a lot though... |
|
|
Aug 20 2007, 01:06 AM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(sniper69 @ Aug 20 2007, 01:02 AM) but i can see that you can also fit the BS-02/BS-03 there... Doom says doesn't help much wor.. due to the restrictive holes. Wait for him to come in and elaborate lor., not sure it would help a lot though...I was thinking of the getting the BS-03 |
|
|
Aug 20 2007, 01:22 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(sniper on the roof @ Aug 20 2007, 01:06 AM) Doom says doesn't help much wor.. due to the restrictive holes. Wait for him to come in and elaborate lor. I was thinking of the getting the BS-03 , Doom's right, about the restrictive holes, err about the BS-03, is the fan blowing to the card area or blowing outwards? or can be switched? ... |
|
|
Aug 20 2007, 01:38 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Yah ... I'm back.. .
this is the whole scenario .. BS-03 can be used either for exhaust or intake air under the condition the graphic card isn't using blower type that exhaust to the rear side of the case such as 8800GST, GTX, Ultra and 2900XT.. the hot air would be suck back to the case by the side patent fan if it's configured to intake .. If it's adjusted to exhaust, it doesn't do much good coz the vent holes are too restrictive for air to exhaust .. beside there's already lack of air at the gc zone .. so what's the point of having another exhaust fan. As for BS-02 .. it only works when there's vent holes at the side panel as that's where the case fan could draw air from. If it's configured to intake it would cool off the gc very much by 5c for core and all the memory and capasistor as well. This is under the condition the gc is using blower type of cooler that exhaust at the end of the case so that hot air could be pushed out from the case. However it leads to dust accumulation. This post has been edited by Doom: Aug 20 2007, 01:40 AM |
|
|
Aug 20 2007, 10:30 AM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(Doom @ Aug 20 2007, 01:38 AM) If it's adjusted to exhaust, it doesn't do much good coz the vent holes are too restrictive for air to exhaust .. beside there's already lack of air at the gc zone .. so what's the point of having another exhaust fan.  Natural convection... hot air rises mar. Basically, if use long vga card and full complement of HDD's... this means the exhaust area (marked A) is very restricted. Some air (marked B) will from the rear intake will still be pulled up due to the VGA fan pulling it in but when it's exhausted....I think it'll sorta get stuck on top (marked C) . My top panel does feel kinda warm Anyway, I won't be using a BS-02 side panel fan cos I don't wanna ruin the black box look But I do agree.... need another fan on top be it intake or exhaust. ( Intake will cool VGA by the air's velocity while exhaust should ease the case temps) |
|
|
Aug 20 2007, 11:00 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
, about the top panel... it can be done right, only that will ruin your "black box" looking |
|
|
Aug 20 2007, 02:10 PM
|
Senior Member
2,287 posts Joined: Jun 2007 From: Anno Domini Time Ultra: 1,000,000 Trans Am Attack!
|
Just thinking about upgrading casing soon after I replace my mobo.
Lian-Li PC-007. Good Casing?? (Sorry, I'm noob here ) |
|
|
Aug 20 2007, 02:26 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(temptation1314 @ Aug 20 2007, 02:10 PM) Just thinking about upgrading casing soon after I replace my mobo. Good as in term of ....???? Lian-Li PC-007. Good Casing?? (Sorry, I'm noob here ) air flow = nice weight = sure lighter than those SECC with the same type design = depends on the user |
|
|
Aug 20 2007, 02:27 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
that's the only issue .. to get the gc zone there must be two fans one intake while another exhaust ...
that's why those that using blower type of cooler found on 8800Series and 2900XT is recommended to use a top or side fan as intake and let the card do the exhausting hot air through it's own cooler .. as for those that aren't using the type of the cooler that I mentioned, one intake and one exhaust fan is definitely needed to effectively cooling the gc zone .... intake to cool the card while exhaust to take out the hot air .. |
|
|
Aug 20 2007, 02:30 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(sniper69 @ Aug 20 2007, 11:00 AM) , about the top panel... it can be done right, only that will ruin your "black box" looking But of course.. you're right... black box look Btw, which casing you're getting since you have a WTS: PC-A10 QUOTE(temptation1314 @ Aug 20 2007, 02:10 PM) Just thinking about upgrading casing soon after I replace my mobo. Why a 6000+ and mobo upgrade? spend all on casing better right? Lian-Li PC-007. Good Casing?? (Sorry, I'm noob here )Back to your question.. how do you define good casing first? Added on August 20, 2007, 2:32 pm QUOTE(Doom @ Aug 20 2007, 02:27 PM) that's the only issue .. to get the gc zone there must be two fans one intake while another exhaust ... I just ordered the BS-03... will take a couple of days to arrive.that's why those that using blower type of cooler found on 8800Series and 2900XT is recommended to use a top or side fan as intake and let the card do the exhausting hot air through it's own cooler .. as for those that aren't using the type of the cooler that I mentioned, one intake and one exhaust fan is definitely needed to effectively cooling the gc zone .... intake to cool the card while exhaust to take out the hot air .. I'm using a 7800GTX so it's blowing the other way round... gonna experiment with ultra positive case pressure. Set the BS-03 as blow..hehehehe... and also some invisible mods to the front bezel which will have minimal effect This post has been edited by sniper on the roof: Aug 20 2007, 02:32 PM |
|
|
Aug 20 2007, 02:37 PM
|
|
Senior Member
2,287 posts Joined: Jun 2007 From: Anno Domini Time Ultra: 1,000,000 Trans Am Attack!
|
Ermmm that 6000+ decide to upgrade later after I get mobo and casing.
Btw, my current mobo quite sux with the high end GC. Hmm.... good in terms of cable management and air flow? |
|
|
Aug 20 2007, 02:43 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(temptation1314 @ Aug 20 2007, 02:37 PM) Hmm.... good in terms of cable management and air flow? In that case.... PC-A16.Very flexible... can throw in shit loads of fans...cables can go from the edge of the mobo to behind the bay drives. The cons is that it is very open so its not accoustically sealed. |
|
|
Aug 20 2007, 02:46 PM
|
|
Senior Member
2,287 posts Joined: Jun 2007 From: Anno Domini Time Ultra: 1,000,000 Trans Am Attack!
|
Err... what u means as "very open"??
Size?? |
|
|
Aug 20 2007, 02:56 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
@sniper
I'm not sure either how does a 7900GTX cooler will works since it blows toward both directions ... so u could try to mount the fan of BS-03 both intake and exhaust and see any different in temperature.. @temptation1314 PC-A16 is standard ATX size .. It has lots of ventilation holes on the CD-ROM bezel .. that's why sniper refers it as very open ... |
|
|
Aug 20 2007, 03:08 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
i really thought Doom's refering to me , that's why at first... i'm kinda ... anyway, selling the A10a, i'm getting the PC-A70a, damn nice la or else, it could be a HSPC? |
|
|
Aug 20 2007, 03:09 PM
|
|
Senior Member
2,287 posts Joined: Jun 2007 From: Anno Domini Time Ultra: 1,000,000 Trans Am Attack!
|
Hmmm... ok, could advise me usualy where do you guys bought those lian li casing??
|
|
|
Aug 20 2007, 03:15 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(temptation1314 @ Aug 20 2007, 03:09 PM) Hmmm... ok, could advise me usualy where do you guys bought those lian li casing?? ATE Sdn. Bhd. got, Cycom also got, but limited to PC-7s IIANM... |
|
|
Aug 20 2007, 03:16 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(sniper69 @ Aug 20 2007, 03:08 PM) i really thought Doom's refering to me , that's why at first... i'm kinda ...anyway, selling the A10a, i'm getting the PC-A70a, damn nice la or else, it could be a HSPC? The interior celup soldam wan |
|
|
Aug 20 2007, 03:18 PM
|
|
Senior Member
2,287 posts Joined: Jun 2007 From: Anno Domini Time Ultra: 1,000,000 Trans Am Attack!
|
But I see PC-007 much more tempting than A16 ler
|
|
|
Aug 20 2007, 03:22 PM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(sniper on the roof @ Aug 20 2007, 03:16 PM) No need so big kwa?? Wanna rear chickens inside kar? either get as biggest as i can, or get a naked case (HSPC), i don't know, i like the biggest casing The interior celup soldam wan |
|
|
Aug 20 2007, 03:59 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(sniper on the roof @ Aug 20 2007, 01:06 AM) Doom says doesn't help much wor.. due to the restrictive holes. Wait for him to come in and elaborate lor. Cut out the mesh thingy at the back lar. Then u haf a nice unrestricted exhaust at the back. But I think the evercoll is enuf d coz it's basically teh same thing just look ugly in the black plastic instead of alu like LL.I was thinking of the getting the BS-03 |
|
|
Aug 20 2007, 04:07 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(ianho @ Aug 20 2007, 03:59 PM) Cut out the mesh thingy at the back lar. Then u haf a nice unrestricted exhaust at the back. But I think the evercoll is enuf d coz it's basically teh same thing just look ugly in the black plastic instead of alu like LL. The restriction is not just the holes at the back but also the small gap for the fan to move air inside the duct itself. |
|
|
Aug 20 2007, 04:10 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(sniper on the roof @ Aug 20 2007, 04:07 PM) The restriction is not just the holes at the back but also the small gap for the fan to move air inside the duct itself. Oredi ordered the BS03 might as well try lor. U'll be surprised that teh BS03 actually moves a decent amount of air as it is. Even the older style that used the blower fan moves a decent amount of air. |
|
|
Aug 20 2007, 04:59 PM
|
|
Senior Member
1,995 posts Joined: May 2005
|
ultra positive air pressure sometime work negatively, beware of that........ u need to make sure that the air exhausted fast enough to get rid of hot air within, if not it will just keep on circulating only.......
speaking or a70 i would love to get that too............ wander if can do reverse ATX on that too............. |
|
|
Aug 20 2007, 05:22 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(LExus65 @ Aug 20 2007, 04:59 PM) ultra positive air pressure sometime work negatively, beware of that........ u need to make sure that the air exhausted fast enough to get rid of hot air within, if not it will just keep on circulating only....... Yeah.. thought of that too. Ever since my first rig, I've always been a negative pressure person but I think in such confined space...have to give positive pressure a shot. Brute force approach to cooling.The main challenge is there's no real way of greatly improving the exhaust without ruining the overall look of the case. So far I thought of the following.. 1) Do up a conical diffuser inside the front bezel to smoothen the air coming from the front exhaust... should help with resonance/accoustics too. Or just a piece of Paxmate so it doesn't sound like air hitting bare metal. 2) Instead of using the 5" and 3" bezel clips... chop them off and mount the empty bezel cover onto the front panel instead. And do a divider on the inner part of the front panel to prevent exhaust fan from entering the case via the empty drives on top. Even if the above works... the results should be minimal at best This post has been edited by sniper on the roof: Aug 20 2007, 05:23 PM |
|
|
Aug 20 2007, 08:22 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
@sniper on the roof
Wait until u got the BS-03 to test it on ur own ..... there's always a different result with different setup ..... |
|
|
Aug 20 2007, 10:40 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
Just finished setting up Shorty in the new pronstation...
Attached thumbnail(s) 
|
|
|
Aug 20 2007, 10:42 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
nice setup there .. love the table so much ...
anyway show some photo of the interior men ... really want to love A05 again ... |
|
|
Aug 20 2007, 10:45 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(Doom @ Aug 20 2007, 10:42 PM) nice setup there .. love the table so much ... The whole night moving everything from the old place to new... so didn't have time to muck around.anyway show some photo of the interior men ... really want to love A05 again ... The older internal pics are on my sig... click on Shorty. |
|
|
Aug 21 2007, 12:37 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
@sniper on the roof
is that ikea table? it sure looks like the one i've back home.... I really must admint, the little "black box" really shows its true elegance with the setups. Clean and simple....Quickly post your workstation at the hardware thread!! hahaha...btw, wat r u doing in Taipei? I thought you simply put the location for showing off... |
|
|
Aug 21 2007, 10:16 AM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(blessedvillain @ Aug 21 2007, 12:37 AM) @sniper on the roof Yup... it's an IKEA table is that ikea table? it sure looks like the one i've back home.... I really must admint, the little "black box" really shows its true elegance with the setups. Clean and simple....Quickly post your workstation at the hardware thread!! hahaha...btw, wat r u doing in Taipei? I thought you simply put the location for showing off... Which is the reason for changing casing... not enough space to put my previous "Akasa Eclipse62" As for Taipei... I'm here as part of the so called Brain(questionable ) Drain. |
|
|
Aug 21 2007, 10:36 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
My EX Lian LI A05B that never got a chance to show it here... it belongs to someone else now ...
   |
|
|
Aug 21 2007, 11:52 AM
|
|
Senior Member
2,287 posts Joined: Jun 2007 From: Anno Domini Time Ultra: 1,000,000 Trans Am Attack!
|
You got a nice EX setup there.
I hope I can get my "GF" soon |
|
|
Aug 21 2007, 12:43 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
wah...the more i see the little beast A05B,the more i like it!!! Tough and strong character resemblance....but i still like my PC-7s though, my first lianli casing, first aluminium casing, and also my first self-assembled PC. Nothing can beat the first, like the 1st gf...hahaha.....
|
|
|
Aug 21 2007, 01:03 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(blessedvillain @ Aug 21 2007, 12:43 PM) Nothing can beat the first, like the 1st gf...hahaha..... Until you find a hotter package |
|
|
Aug 21 2007, 02:08 PM
|
|
Senior Member
1,281 posts Joined: Dec 2004 From: MoRza Boulevard
|
Doom, what cooler u use for ur matx mobo??
|
|
|
Aug 21 2007, 04:09 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
@kujaboyde
Artic Cooling Alphine 7.. cost me RM55 only .. works well and quite .. but not highly recommend for proc that consume up to 90 watts ... @blessedvillain In my opinion .. this is the best designed Lian Li case after V1000.. other new release aren't that brilliant at all .. and just for ur information, many foreginer use this case for their expensive rig that includes a 8800 Ultra inside ... This post has been edited by Doom: Aug 21 2007, 04:11 PM |
|
|
Aug 21 2007, 10:28 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(sniper on the roof @ Aug 21 2007, 10:16 AM) Yup... it's an IKEA table Brain drain my foot. U ran to Taiwan coz u used to sing too many patriotic songs ler. Dats y u stuck in Taiwan now. Which is the reason for changing casing... not enough space to put my previous "Akasa Eclipse62" As for Taipei... I'm here as part of the so called Brain(questionable ) Drain. |
|
|
Aug 21 2007, 11:14 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(Doom @ Aug 21 2007, 04:09 PM) @kujaboyde By the way, have you tried reversing the front exhaust fan? Set to intake instead.Artic Cooling Alphine 7.. cost me RM55 only .. works well and quite .. but not highly recommend for proc that consume up to 90 watts ... I discovered another problem now.. the darn thing is pulling hot air over my pron collection HDDs. Without aircon, the interior case free air temps are around 42C idle!!!! QUOTE(ianho @ Aug 21 2007, 10:28 PM) Brain drain my foot. U ran to Taiwan coz u used to sing too many patriotic songs ler. Dats y u stuck in Taiwan now. Ok ok.. the real reason is because they raided all my favourite pron vcd shops so I came here lor... where JAV is cheap and abundant |
|
|
Aug 22 2007, 08:32 AM
|
|
Senior Member
1,995 posts Joined: May 2005
|
sing patriotic song, hehe............if like that i also want to go taiwan liao.......
JAV is cheap and abundant ?? a very good reason i must go there oftenly.......... btw back to topic, it a good idea to use difuser, but the space is quite limited, hard to get it workout........ just an idea while looking at dooms, may be u can make side panel or top panel mod....... just a series of small holes may just make the magic works...but u need a clean drill or cut to get it done, in taiwan i believe u can find someone to do it....this guys are good at fabricating aluminum stuff |
|
|
Aug 22 2007, 09:18 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hahha ... guys really getting out from topic ...
@sniper on the roof Yah I did that before and it's not good to change the airflow setup coz the intake would too less resulted lack of cool air within the case ... especially the cool air could barely reach CPU and GC zone .. so it'a no no .... btw.... I'm a mix of taiwan and malaysia actually ... my mom is taiwanese ... hahah .. |
|
|
Aug 22 2007, 09:32 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
doom..
hahaha...u taiwanese!! (half at least)... no wonder lian li stuffs are you choice!! luckily ur mom didnt name u lian li..(lame).... |
|
|
Aug 22 2007, 10:54 AM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(Doom @ Aug 22 2007, 09:18 AM) hahha ... guys really getting out from topic ... What I meant was:@sniper on the roof Yah I did that before and it's not good to change the airflow setup coz the intake would too less resulted lack of cool air within the case ... especially the cool air could barely reach CPU and GC zone .. so it'a no no .... btw.... I'm a mix of taiwan and malaysia actually ... my mom is taiwanese ... hahah .. Rear fan = Intake Front fan = Intake BS-03 = exhaust. + Divider to isolate psu exhaust from front fan. So.... when you coming to Taiwan? Your mom from Taipei? QUOTE(blessedvillain @ Aug 22 2007, 09:32 AM) doom.. This is really spam hahaha...u taiwanese!! (half at least)... no wonder lian li stuffs are you choice!! luckily ur mom didnt name u lian li..(lame).... |
|
|
Aug 22 2007, 03:50 PM
|
|
Senior Member
2,287 posts Joined: Jun 2007 From: Anno Domini Time Ultra: 1,000,000 Trans Am Attack!
|
Need some reco here
I think I'll cancel my proc upgrade Going for Mobo/PSU/Casing Upgrade!! Which one to go first?? I'm thinking for Casing(Beloved Lian Li) |
|
|
Aug 22 2007, 03:51 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(temptation1314 @ Aug 22 2007, 03:50 PM) Need some reco here budget budget budget... I think I'll cancel my proc upgrade Going for Mobo/PSU/Casing Upgrade!! Which one to go first?? I'm thinking for Casing(Beloved Lian Li)  we need to know ur budget range  |
|
Topic ClosedOptions
|
| Change to: |  0.1460sec
 0.50
 6 queries
 GZIP Disabled
Time is now: 20th December 2025 - 12:09 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.