Attached again.. the 58C thing is the middle is not accurate. That's a WD2500KS which was affected by this batch which over-report it's temps.

---

Added on October 12, 2007, 8:34 amBit tech's PC-B25 review..

http://www.bit-tech.net/hardware/2007/09/05/lian-li_pc-b25/3

But the reviewer damn cacat.. wanna run performance test but builds a PC like a noob. So many cacing of course the temps aren't good ler.

This post has been edited by sniper on the roof: Oct 12 2007, 08:34 AM


Attached thumbnail(s)

thanks ... many many thanks ...

hm I think the reason that the case isn't having fantastic airflow because the HDD cage disturbs airflow ...despite the dual 12cm fan in front .. it would be meaningless if the exhaust doesn't has equal or more airflow out from the case ..

the heat just trapped within the case for longer period... .. the solution would be reduce the airflow of the front fan and increases the rear fan ... with the aid from PSU fan .. I think the airflow would be better than ...

about his wiring ... hahah .. can't do much when using PSU with such thick silver braided wrapping ..stiff and not flexible .. can't dumb into the rom cage without causing kinking .... that's why Corsair PSU would be my next toy in the coming month ... hhahahaha


btw found a very nice setup with A05 .... hahha ...where's my jigsaw,dremel and driller ???





This post has been edited by Doom: Oct 12 2007, 04:54 PM

Confirmed got 13 new models of Lian Li case arrived at my supplier side. Next week u can start to ask ur favourite resellers for the Lian Li stocks.

I'm aiming for the A12 or PC007.



Doom: that rig looks nice, neat work to fit the rad inside

Woo..same same:P

You want to sell Lian-Li here not?

What;s the casing model above? So Seems like better than mine KL01~

@jy14
hahah.. it's really sick when I saw it ... damn neat and cool ..

performance secured with that triple rad.. make me wanted to just mod mod and mod .... where's my tools ...aaarrrrrr

@lehteck

That's PC-A05 my friend ..

I used to have one and modded a lot .. so damn regretted to sold it away ..
Running my rig naked ... arr ... I want it but it's so expensive over UK and I got no tools to cut holes for rad mounting... ...

Doom....

since ur in UK.... get the Akasa Eclipse 62 la

easily available there..... and so spacious somemore

I know its' every where and the price would be very close to buying a A05 here ..

but the front look really make me back off ... apart from that have u seen anyone with the case using wc inside ...

I prefer to get a case that I don't need to mod to fit in my dual rad wc ..

Would be getting a new rad soon .. so just wanna be sure which one to go ..

if there's no case that could fit in the dual rad without major mod .. then would get a single rad ...

actually ive seen ONE person using WC in the Eclipse.

sniper on the roof

but that was quite some time ago.

not many people posting up pix of their setup in that case....

Yah I think I seen that before as well .. I was wondering what case was it ..

until I know it's Akasa, I give up in thought cause there's no way to get it in MY >.

btw the V2 is really nice ... with 3 added features .. hhaha

I'm so not firm with my stand now thanks to you .. should I or Should I not leave the Lian Li clan ...

Leave n go SST. TJ07 can swallow a 2x120 rad in lower compartment easily with simple L bracket mounts. Can even swallow 3x120 rad easily if u put the HDDs in the rom slots. Actually......... can even do 4x120 rad. BUT if u need to carry the case then mati lar. Heavy like elephant.

This post has been edited by ianho: Oct 12 2007, 07:33 PM

Eclipse 62 is a gorgeous case la wei... seriously awesome. mirror shine removable mobo tray somemore

the only flaw in the Eclipse to me is the front panel is plastic.

also the HDD cage is still old school. wish they updated that. but thats a small matter actually.

wat else is new in the V2? i only see the PSU holder thingy...


or like ianho said... go SST... TJ10

This post has been edited by mADmAN: Oct 12 2007, 07:34 PM

hahha I don't want to get bigger and bigger case here .. coz if later on if I gonna move again after finished my course here ..

I'd have a headache with packing and sending all these stuffs..

btw Mirage 62 is a real deal ... awesome looks ..

I'm still into A05 coz it's small ... which is the smallest I could get without turning into using M-atx mobo ..

my consideration is still not finalized yet ..

I agree with doom that the A05 is a good choice for small compact case. Especially the way that 3x120 rad is fitted inside. Dam cool. Suitable for students to bring around when they go overseas to study.


Uncle Ian: With all the stuffs inside the TJ07, it's more like carrying a dinosour around. When doom courier via Air Freight, the courier bill will make alot of parents faint . hahaha, if goes by ship, wonder how long it takes to reach UK and back here. TJ07 for home use surely the best. Nothing comes close to it yet I think.


Back to ah Lian, PC007 and PC7 Plus, mind to explain to me abit on the difference ? I check the official website, not much difference I c.

hahha .. apart from the shipping fee, is the survivability of the case that is my concern ...

see what happened to the project sleeping forest ... gone ...the whole forest was burned down by the flame of DHL ....

I\m still so headache now .. where to get a case that can fit the wc with need of cutting at all ...

16 models.........wah very impressive wow......... i would love to see hows the price goes........

No need headache... not the best of methods but when you don't wanna go for surgery, there's always the radbox

http://www.swiftnets.com/products/MCB-120-r2.asp

hahha .. that's the last thing I would do coz the PCI bracket only allowed tube of 3/8 to pass through while I'm using 1/2...

I won't trade off the tube to allowed a dual rad to fit outside ...coz the tubing job would be even more diffiucult to get it done ..

so final decision is to get a single rad and mount it internally at the rear blow hole .. then add a big reservoir to current loop to balance off the performance drop of using single rad..

hope things work out well ... I can't change the entire system to air cooling due to the placement of the PCI-E and PCI slot ...

I got a sound card that need to fit at the last PCI slot and leave some space between the two cards for airflow .. Else the gc card's mem and other chip would get toasty ...

wooowwww....mantap gila




Edit by mod: pls dont quote pics.

This post has been edited by ianho: Oct 13 2007, 03:22 AM

perghhh....
nice one la bro...





edit by mod: pls dont quote pics.

This post has been edited by ianho: Oct 13 2007, 03:22 AM

hhehe .like it ... love it ... fascinating about it ??

buy one and send to uncle Ian to mod it ...

then u could get something that is pretty similar. .

This post has been edited by Doom: Oct 13 2007, 01:22 AM