Eh i just joined yesterday in V2, and now V3 already, so fast.. hey btw, a noob question here.. where can i get the 70mm x 70mm fan for the top fan of my casing? if im not mistake 70x70mm is not that common right? normally i only see 80 / 92 / 120mm fans..

oh ya, will post the pic of my 'soft-mod' LianLi PC-007B with akasa paxmate (hehe if only it's considered as a modification too )

---

Added on July 3, 2007, 12:24 ambro you sure? but i just measured it with my ruler, there's no way i can see it wrongly le.. weird.. 7cm x 7cm le.. at first i also feel weird, but it's really 7cm le..

---

Added on July 3, 2007, 12:26 amsorry.. stupid measurement.. lol.. i go and measure the distance between the screw's hole.. how stupid was i.. thanks madman.. ah feel ashamed

This post has been edited by nicholas_1213: Jul 3 2007, 12:27 AM

Hehe, bcos i straight saw the 4 holes, then i straight measure without thinking lo.. silly me

yeah the paxmate i only use 1 and a half piece of them, still left 2 and half pieces.. bcos one of my side panel is mesh side panel + 25cm side panel fans, therefore i only paste it at the bottom part, some at the front part and some at the back.. will post some pics later when im free hehe.. was thinking to make it all black, but the nice aluminum will all be covered and it'll be kinda wasted hehe..

but for the bottom part u need to cut some holes so that u can put back the HDD holder nicely

Hehe, i was being too stupid to straight go and measure the distance between the screw's hole.. bcos i don't have a 8cm fan right now, so without matching, i saw the top part of the casing, and instinctively, i took the ruler and direct measure the distance between the screw's hole

Pic already taken, will upload them by tonight.. but actually there's nothing special lo, just cut them into nice shape so that they can fit into the casing nicely, so don't expect too much from the pic hehe

Hi, pics uploaded as promised.. again, sorry for the low quality of pic as it's taken by my webcam.. i don't have a digital camera

My lovely lian-li casing (with it's little bro coolermaster Xcraft)


Some close-up for the HDD cage:



For the back part (with the 2 screws), before pasting the paxmate, gorek 2 holes 1st by using screwdriver or any sharp object so that it is easier to screw it later.

For the front part (a sliding metal hold by the holder), i cut a line as a opener, so that the metal can go through the paxmate and being held by the holder.

the hard part is pasting the paxmate to the case.. really have to be patient hehe

Another few pics for other parts of casing with paxmate (behind and front)



For the front and back part, just cut the size and shape according to the flat surface (as shown in the pic).

hehe, thanks for the compliment it's actually an easy job, but need a lil bit of patience

Yalo, according to him, original price is around RM70++ (forgot already), but i got my unit for RM25 hehe.. but for it's ori purpose which is to reduce the noise produced by the fans, i don't really test it as in like a 'before and after', my purpose is just to enhance the look only hehe..

Hemm the paxmate come with 2 size right? one is memang fit the bottom size one (but i still cut a bit bcos it's too long). use that one, do the marking 1st at the bottom of the paxmate (below the white paper where u'll going to tear it away soon), then cut it, then only tear off the white paper to paste it.

for the slide in part, just cut a line as a opening.. this part is a bit tricky a bit, as you've put your hdd cage's leg through the opening, slide it into the holder 1st before paste and press it firmly.. sorry for my poor description

hehe, if really nextime change casing, then sell the paxmate together with it lo.. bcos i still have a lot of paxmate.. for the remaining paxmate i think i still can use it on other 2 more casings hehe..

yeah, im thinking to buy that also.. the dvd-rom really spoil the looks le..

Hemm, anyhow the aluminum dvd bezel looks really nice.. may i know how much you bought it le? bought it at ATE?

Hehe, this funny arguing still continue hehe.. and mADmAN will really go MAD hehe..

Anyway thanks for the info, not as expensive as i thought hehe.. will get one or two as i really cant stand the dvd-rom ori bezel

Hehe, so funny when i saw those comments from you guys' friends.. but i bet my friends will have this kind of reaction too.. but i'll ask them to wear their spec and have a closer look at the aluminum finishing, and then tell them off the price, then maybe they will keep their mouth shut hehe..

yay, i'm going to get myself a dvd-rom bezel this weekend

Hehe, but my gf said that the casing is nice when i show her through webcam (she is in adelaide now).. guess what? it is because she saw the blue colour fan inside my casing, not because of the aluminum (i think webcam cant show it clearly also).. and one thing, i didn't mention to her that the brand is lian-li .

Hehe, if want to become a 'girl-magnet' casing, just mod it and become bling bling casing, with cool side panel and uv light inside

Hi, im going there this coming sunday to get the dvd-rom bezel.. i can help u guys to ask about those items just ask the availability and the price right?

Hehe bro, which product do u want to get info? or same with above 2?

Hemm.. what is this ?

Haha, thanks to Madman's pic, i already bought myself the dvd-bezel, very nice indeed.. but how come the cover is not aligned with the surface? as in when i look from the side, the upper part of the dvd-cover goes into the casing a bit.. or i have to push the dvd-rom outside a bit?

Hehe, guess what i use to clean the casing?

Hey i saw my soundcard hehe anyway nice casing u have there