Don't worry, ip geolocation websites are not accurate one. If you have said IP assigned to you, it already means that the IP is in your area and not in Miri. A better way to check is to do a traceroute to see the route that it takes.

After the RYE2017 RM10 upgrade to Advance 30Mbps+Aneka+JumboPack+Std20, lucky few are paying only RM139 but most paying RM159. U should have gone for the RYE2017 RM10 upgrade to 50Mbps.

anyone here know how to set up the DIR-850L from TM to be a wireless repeater .

i cant seem to get it to work.

DIR-850L Repeater Mode

Change to Repeater Mode


In the Station section, connect to your existing wifi.

My IPv6 setting for the DIR-850L is link-local only.

This post has been edited by soonwai: Jan 17 2018, 08:24 AM

Bonanza unifi advance 30mbps for 139rm must go trough agent? Or able to get from normal tmpoint also?.

For new installations.

Tia

This post has been edited by victor2212: Jan 17 2018, 07:54 AM

can do it via shopback...

i asked TM Point they say not available for Quill City Mall.. not sure about other TM Point

Have you tried to upgrade it to 50mbps with +RM10? try give TM a call at 100.

This post has been edited by Chrono-Trigger: Jan 17 2018, 08:06 AM

Here's an example. Results from iplocation.net. Other dbs will give you different results.
175.144.42.92 - Miri
175.144.118.9 - Shah Alam
175.141.100.168 - Shah Alam

okie thanks...

last night i tried to change to repeater mode. after reboot. i cant load the web UI anymore. donno what went wrong.

Oh, sorry, forgot, ip address changes to 192.168.0.150 or 250 after the DIR-850L switches to repeater mode.

This post has been edited by soonwai: Jan 17 2018, 08:28 AM

ooh. no wonder. thanks bro.

Uncle want to terminate over-contract package and re-subscribe. Still need to go over to TM-point? If relocate the over-contract package to another location, any idea how much for the cabling? Pay to the contractor or billed? thanks.

Correct me if i'm wrong. From my understanding, when we do speedtest to East Malaysia server, the connection will go through West Malaysia (TM main server) first before it goes back to the speedtest target on East Malaysia, thus results in higher ping compared to when we do speedtest directly to West Malaysia servers.

And regarding the IP ranges and locations, since i upgraded to UniFi, so far i'm getting similar performance unlike what streamyx does. Stable most of the time, avg 27ms ping. I'm from Miri, Sarawak btw.

No problem, let me know if that works.

Got to go to TM point. I also terminate and resubscribe. Got to give them the old BTU

Just bring the old BTU / Modem will do?
And on the spot receive new ones? Can go back and plug and play immediately or need to wait for tech to come over? I assume nothing else to be done since cabling already there.

Relocation still needs installer to come to do the necessary. You will need to apply it in nearest TM Point and choose the installation date.

This post has been edited by fruitie: Jan 17 2018, 11:11 AM

yes, need to go tm point

Not relocation. Re-subscribe. i.e. terminate existing package and apply new one.

same here 179+ gst 18x.

can downgrade to 139? or only upgrade to 50mb with +rm10? still in contact thou