Maxis branded right...

Please try the following credentials

Tier 1
user
user

Tier 2
Administrator
[Serial Number]

Tier 3
MaxSysAdm
!!bestHOME!!XXXX
XXXX = last 4 of Serial Number

At last manage to login using tier 3.

Thanks alot!

Can use these credentials for Deco M4?

huh? Deco M4 got nothing to do with ISP.

No, those provided credentials are set by MAXIS on their provided routers

Your own Deco mesh would have a default password printed on it

Both are tplink products, but isp provided ones are usually customized with special features or locked down in settings
so that's why despite resetting, the maxis provided router keeps its default maxis passwords

Because the credentials your provide gave access to super user setting in the router.

Now I can change and enable few features that has been locked in normal user mode.

Just sharing on my cheapskate/cheapest set up for 3000 sqft.

Bought two units of Archer C80 for easymesh.
Top floor manages to get consistently 400-500 mbps for main router.
Satellite put on 2nd floor, managed to get 140-150mbps
Ground floor around 100mbps

Enough for daily use.
Both units total cost about RM300 only. :-)

I bought a subsale house. So, the optic fiber connection is located at the store room and there is 3 built-in LAN Cable which extend to 3 strategy places around the house.

Thus, what is the best solution? Mesh, wifi extender or two different modem, one in each floor?

This post has been edited by Gabriel03: Nov 3 2023, 08:53 PM

Mesh WiFi system with wired backhaul

You get the fast speed of a wired backhaul and the good roaming feature of most good mesh Wi-Fi system in the market

How can I setup this from tether app?

Not the fan of that app, but you can find the DNS settings in either internet connection (a.k.a wan settings) or lan DHCP settings, but I prefer set at wan level

I also prefer use 192 web interface when possible over such app

I already on web interface with lan cable, in the internet setting where I can put the dns?

Advanced (4th/5th tab depending on models) > network > internet



This post has been edited by MyProLife: Nov 4 2023, 04:20 PM

Change the primary and secondary dns?

Ya both of them

Just change both for ipv4, for ipv6 there dedicated section you can found on the left column menu

If I want to set Cloudflare dns mean both primary and secondary are the same number?

For cloud flare
Primary 1.1.1.1
Secondary 1.0.0.1

Then can check 1.1.1.1/help to make sure configuration is correct

seems like right

Anyone is using ax55 ?
I thought pppoe setup should straight fwd
I folo all setting frm my previous tenda ac23 but still failed to connect
Tshoot :-
- try all 4 ports at the back of modem.
- swap 5e cable
- reboot many times

If connect back to my tenda, then internet is up
Unifi pwd confirmed same in both routers



This post has been edited by sitescope: Nov 9 2023, 07:24 AM

Must set vlan IPTV as well

Don't use app, use web management (192 something)

Oh coz i dont subs iptv
Thought leave it blank
Will retry