Hello all.

I am planning to get the AX50. I want to connect it to my Huawei B618, so that the B618 works purely as modem, and AX50 handles all the router work.

The main reason I want to get a dedicated router is so that when someone is watching Netflix in the living room, I can still play online games on my PC with minimal lag. Currently the lag is so bad if streaming and gaming at the same time. I want to use the QOS feature (missing in B618).

So my question is, does the QOS feature on the AX50 works for this scenario? I read that bandwidth management is not supported by AX50.

Thanks!

PS: Fiber internet isn't an option currently, so the B618.

are u sure your 4G speed is fast enough to do so...

This post has been edited by lokilim: Nov 6 2020, 01:46 PM

Help needed here. Thanks in advance all.

I had a TP-Link Touch P5 AC1900 router which I bought 2 ~ 3 years ago and never used before until I switched to Maxis Fiber recently. I tried to use the Touch P5, replacing the stock Archer C5v provided by Maxis but I failed to get the Touch P5 connected to Maxis Fiber. At the box, there's sticker stating it support Unifi and Maxis Fiber. Under the Network-> IPTV, it do have setting for Maxis-Malaysia but that doesn't work. Tried custom setting with PPPoE VLAN 621, VoIP VLAN 822 etc but no matter how I tried, it just can't get connected and eventually I have to switch back to Archer C5v.

Anyone have successfully paired the TP-Link Touch P5 with Huawei GPON (LAN 2) for Maxis Fiver service? Mine to share your setting? Mine was Maxis Fiber under TM infrastructure.

Thanks in advance!

William

Your issue is known as bufferbloat which is typical on a 4G Internet connection.

It's been there since the 3G era and there's not really a solutuon unless you put a hard cap on the netflix streaming speed.

Do you use the right PPPOE username and password from Maxis?

This post has been edited by blacktubi: Nov 8 2020, 09:40 AM

What’s the difference between TL SF 1005P and TL SG 105 gigabytes port? I’m looking for extra ports that is compatible with deco X20

The speed is not much an issue, can go as high as 100Mbps, and ping usually 20-40ms.
It's just that when other users are streaming, gaming will be affected a lot.


I see.
So to effectively minimize the affect of bufferfloat, I need to limit bandwidth on some devices? Unfortunately I read the AX50 have this feature removed.
QOS will help too? If yes, is the QOS on the AX50 good enough?


Thanks for you reply guys!

Yes. I have the username and password. Will try to reset and configure again to see.

Need some mesh wifi advice. Thanks in advance all.

Deco X20 vs M9 Plus? Both similarly priced for 11.11.

3-storey superlink house / 4000 sq ft / Unifi 300 Mbps but may upgrade.

Modem and router inside my storeroom.

tplink ax 20 already support one mesh

yup but only for v1.
onemesh firmware for v1.2 has not been released yet and tplink says 'there is no determined date'.. what da heck
so if anyone plans to use onemesh with ax20, do check the version number first

Hi guys,

Recently Im planning to buy a tplink ax router to replace the c5 router given by TM, been using it for quite some years. Which ax router is more recommended, ax20 or ax50? Thanks.

may i know what is the latest firmware for the following switch?
-TL-SG108E - Current FW 1.0.0 Build 20191021 Rel.53360
-TL-SG105E - Current FW 1.0.0 Build 20191105 Rel.33503

can't really find the FW download in Malaysia website.

thanks

Archer C1200 Time

Hi , wanna ask what is the problem with router as suddenly no SSID can be found , cannot perform reset ( via the reset button ) no matter how long i press it. Router also not detectable via ethernet connection.
Anyway to fix it or the router is broken ?

Contact CS for the replacement router or getting your own router of your own.

Seems like the router is already dead.

Thanks

Thank you , any router recommended ? Maybe going to replace one with my own. My isp is time

Can someone please teach me the setting for Unifi IPV6 for my AX50 router? I can seem to get it running.

Your device that you use to post your message above already has IPv6?

What's your budget, house size and plan speed?

Thanks

Yes the device has IPV6 but network status says Internet for IPV6 not working. Not sure if the setting is supposed to be DHCPv6 or SLAAC.
Only my IPV4 internet is working. Am using Unifi but cant find anything on the web for unifi IPV6 setting

Go here and check whether you have IPv6 problem or not.