yupe, voting for E6600 upgrade too.

aiyah go straight to X6800 la. problems all solved

1.25v.. why u all can lower the vcore so much. mine was doing 1.375v in bios (1.344v in cpuz) and it only stable at that level. 1.356v in bios sure got erros after 5 minutes in orthos >.<

hehe i just need 400x8=3.2ghz in daily usage. dont need anything higher so i just try to stable it first at this level. when i free sure will try to oc beyong that

Yes i know E6600 is better bocoz hv higher multiplier.. but i dont need 4GHz clock speed for now. Previously my E6300 can hardly reach 3Ghz, its alrdy sufficient for normal use. Really fast enough.
Reason i wanna get E6400 is just wanna get a proc tht can easily hit > 3.2GHz, thts all.. nothing more.
Moreover, i only need to op up RM60 to get a E6400 after i sell my E6300 with RM600. If E6600 i nid top up few hundreds.. sakit hati
Just Oc for fun and like goldfries said, Better proc is good for benchie, for normal use, E6300 got not much different with E6600. (rich E6600 user dont flame me ok )

This post has been edited by yehlai: Dec 6 2006, 01:39 PM

yea u got the point
u wont feel the different while using 2mb and 4mb cache in real life. it is all about benchie. just get whatever u need then ok d

undervolting won't damage cpu rite?
if not correctly done just crash or weird stuff will happen?

ya undervolt wont damage unless u overvolt

brother..this one a bit susah lar...X6800 ler...not 6800 graphic card ler

im oso surprise i can run 1.25v @ 400x7 @ 2800mhz
now priming..oledi pass 6hrs

of cz it wont...only overvolting will dmg cpu
crash means instability lor...if this happens need u need more juice lor

last nite tried 1.375 in bios (1.344 in cpuz while priming) pass 9 hours 59 minues and 18 seconds only. after that failed

temp: highest 64c lowest 60c

sigh sigh i think need more juices again buthen the temp.. makes me dont really wanna add juices

heheheh E6600 compare to E6300...there muh diff babe...4mb with 2mb...lol so much diff..but not fully utilize so much this days dual core..

now running 1.25v 400x7 orthos pass 1hour 30 mins adi , temeperature during orthos (54C cpu/66C core)

yeah..great..im running more than 10hrs orthos liao...stil running
1.25vcore @ 400x7
but temp not much dif i guess wif stock 1.325v

mine can see, if stock vcore can go up to 75, now 67C

my updated pi1m e6600 with abit aw9d-max

wow! at last the abit reaches ur hand~ so how issit?

My E6300 can run 1.275 vCore @400fsbx7 stable. I prefer undervolt vCore to get lower temp at higher clock speed.

well now my cooling solve adi with undervolting, now i just need artic silver 5......

Hi, i'm quite new to overclocking...please guide me along...thanks...

I've just got a new e6300 on a ds3 mobo. The problem is the cpu fan takes about 3 seconds to start spinning...is this normal?

And what is the stock temp for this cpu? My temp is 40C...normal? Im using the intel stock cooler with a normal coolermaster thermal paste. Do i need a new cooler?

And are there any uber noob guides to overclocking a rig with my specs? Would like one that specifically uses a DS3 as an example. I've read some of the guides in the pinned topics...but don't really understand most of them.

Anyone wanna try this one ?

it's normal, takes seconds to spin, if on fan fail warning in bios, lagi annoying, hear long beep ....
will get used to it...
well alot of ppl using ds3 including me....
basicly i started of following what yehlai said in a few pages before,
try 350fsb, 100pcie, memory x2, voltage don't use auto, lock it at 3.25... later tht u can discover yourself......can try lowering vcore to get lower temp, then torture test it with orthos