Did u oversize the tire over the stock rim? Stock macam 195/50 but you use 205/45?
T1R is soft ah? How many ply sidewall constructions?

This post has been edited by alexei: Mar 2 2022, 02:38 PM

Nope the current T1R tires are 195/50. But I'm planning to change to 205/45 for the next one. Not sure about the ply sidewall but I tried to search and gotten BW?

Look at the physical tyres, there got cop sidewall how many plies use polyester or nylon or aramid or steel
then compare compare when u buy other tyres
press press the feeling can tell sidewall stiffness
u want more grip of same size, check speed rating, higher speed rating more grip but faster wear
oversize tyre also need see suit the rim width or not, different model can some cannot, may end up need lower pressure to even out the wear rate on the side becoz tyre donut shape
also, oversize puts more load outer edge of tyre, may got reverse effect more slide if that become too extreme

Time to change my CRV OE tire BS HL33 235/60R18.
Am looking at UC6 SUV or equivalent.
Will skip Michelin despite many good reviews. Reasons are I used 4 sets of Michelin before n present from PSS, PS3, Primacy SUV, Primacy ST. No doubt they good. But all need to be replace even way before they are botak due to peeling, cracking etc.

looking to change axia tyres r14 ori rim
according to my budget comes to these 3

dunlop j6
toyo ne03
yokohama es32

which you guys recommended? not a speedster or garang driver, slow and steady till 120km/h max high way

Then suggest Michelin XM+ for consideration too

u are right
me have same issue with Michelin, at first thought the tyres are bad
but, I figured as long as it maintain good grip until botak, is better than tyre looking good but start losing grip gradually
now I live with it

Consider Falken 832i.
One of the best budget tires if you google around.

i read somewhere, Michelin informed that their tyre still work great until the tyre indicator is hit. so safe u say it still works well even look botak.

Michelin overbudget, almost 200 per pcs

Falken have quite some good reviews but didnt see much on shopee tho

gotta be a user to believe it
also it's pricier, but in my limited experience the mileage and grip all the way until end of tyre life is worth it

Why go shopee? If want just direct call or go to main Falken Distributor (Stamford) to order bru..
Most local tire ship also can help order as SN832i tire is quite common.

https://www.stamfordtyres.com.my/retail-workshop/

This post has been edited by littlefire: Mar 22 2022, 10:01 AM

In my experience, if u get to Oscar Bukit Kemuning shop, the price is affordable to get PS3, PS4 tire. rm590 ps4 235/45/18 in my case

thanks

some other brand/model is better performance than M now
but, past model one, is become keras and lose grip towards end, so I'll wait and see

Looking to change the stock Toyo AT tires to MT type for my Hilux. Any recommendation on good China brands? tyre size 265/70 R17

was recommended Sunwide ,LEAO for Rm500/pc & Roadmarch for Rm650/pc...... Maxxis one cost about 700++ & Falken 800++

I'm in Sarawak so the price is higher than Peninsular definitely.

saw this ad tyre brand windforce catchfors uhp. Traction AA while groove design kinda the Michelin ps3. No idea if it is good, haven't tried or had a review online.

Is there any performance difference between normal tires and "Extra Load' tires within the same range.. Eg standard PS4 and PS4 ST (Extra Load)?

Hi all, roughly how much do shops charge for (expert) tire inspection - to decide if right time to change or not? I live in KL.

It is a norms in KL there is no charges for inspecting tyre condition (with eyes only) response to your question/concern.

However, if labour works are involved say 'to do balancing' on tyres etc, then charges is incurred.

Tell the shop: Boss, ini tayar berapa lama/bulan/tahun lagi bolih pakai ahh? ..... then make your own decision.

Note: On a normal functioning tyre, tyre manufacturers across the world only recommends the replacement of tyres under 2 conditions:
a )tyre wear has touched the Tyre Wear Indicator mark inside the longkang (at a tread depth of 1.6 mm), or
b )tyre manufacturing week/year displayed on its side is 10 years or older.
Hairline cracks/scratches and what not are NOT a basis of tyre replacement, as often understood.

Care to upload pictures on external conditions on tyres?

This post has been edited by zeng: Apr 8 2022, 08:09 PM