lets continue our discussion here...

PROUD P4 478 USERS


Pentium 4 'C' Northwood/Gallatin (30cappers)/Pentium 4-M 800FSB HT

1) siauann - 2.8C @ 3.71 | Abit IC7-G | Corsair XMS XPERT ddr530 | Leadtek 6600GT
2) zeustronic - 2.8C @ 3.3 | Asus P4S800 | A-Data ddr400 512mb*2 | Palit Radeon X800
3) d3x - 2.8C @ 3.08 | Asus P4P800 Deluxe | Hynix ddr400 512mb*2 | Sapphire Radeon X1600Pro
4) kucingfight - 2.8C @ 3.8 | Abit AI7 | Infeneon CE5 ECC ddr400 1gb*2 | Galaxy 6600
5) KahLooN - 2.6C @ 3.25 | Abit IC7-Max3 | Patriot XBL ddr600 512mb*2 | PowerColor Radeon 9800Pro
6) evilnickwong - 2.4C @ 3.0 | Asus P4P800-E Deluxe | A-Data Vitesta ddr500 512mb*2 | Grandmars 6600GT
7) raymond5105 - 2.6C @ 3.315 | Asus P4P800-X | Hynix BT-J ddr400 256mb*4 | Leadtek FX5900
7) raymond5105 - 3.2C @ 3.68 | Abit AI7 | Kingston Hynix BT-D43 ddr400 512mb*2 | Abit GeForce Ti4200
8) saiaha - 3.06C @ 3.24 | MSI Neo 2 | OCZ ddr400 512mb*2 | GeCube Radeon 9600XT
9) mulut99 - 2.8C @ stock | Intel D865PERL | Apacer ddr400 512mb*2 | nVidia FX5200
10) toch3 - 2.4C @ stock | MSI P4M800 | Kingston ddr400 512+Apacer ddr400 512mb*2 | Gigabyte Radeon 9550
11) enter - 3.2C @ stock | Intel D865GBF | Kingston ddr400 256mb*4 | ATI Radeon 9550
12) overclockalbert - 3.2C @ 3.52 | Abit IC7 | Corsair C2PT Winbond UTT ddr440 512mb*2 | Palit 6800GS
13) choongkeat - 2.8C @ stock | Asus P4P800-X | Kingston ddr400 256mb*2 | ATI Radeon 9550
14) Nostalgia - 2.8C @ 3.22 | Asus P4P800 | OCZ EL Platinum Rev.2.0 ddr400 512mb*2 | PowerColor Radeon 9800 Pro
15) allenultra - 2.8C @ 3.3 | Abit AI7 | Kingston Hynix ddr400 512mb*2 | HIS Radeon 9550
16) glo - 2.8C @ 3.4 | Asus P4C800 Deluxe | Kingston HyperX ddr400 512mb*2 | XFX 7800GS
16) glo - 2.8C @ stock | Asus P4P800-X | Geil ddr400 1gb | XFX 6600GT
17) shift - 2.8C @ stock | MSI 848P Neo V | Transcend ddr400 512mb | nVidia FX5200
18) AREA51 - P4-M 2.2 @ 3.12 | Asus P4P800-X | Apacer UCCC ddr520 512mb*2 | Leadtek 6800NU
19) jayhan - 2.6C @ stock | Asus P4P800-X | Apacer ddr400 512mb*2 | GeCube Radeon 9550XT
20) allenultra - 2.4C @ stock | Intel D865PERL | Kingston Hynix ddr400 512mb*2 | HIS Radeon 9550
21) Jcsy - 2.4C @ 2.6 | Dfi 865PE | Kingston ddr400 512mb*2 | HIS IceQII Radeon X800Pro
22) iori_argami - 3.0C (es) @ stock | Abit AI7 | A-Data Vitesta ddr500 512mb*2 | Gigabyte Radeon 9600XT
23) altie - 2.6C @ stock | Asus P4P800-X | Corsair XMS Pro LED ddr400 512mb*2 | Unika Radeon X800XT
24) altie - 2.8C @ stock | MSI 865 Neo2 | Kingston ddr400 512mb*2 | PowerColor Radeon 9800Pro
25) miraged - 2.4C @ 3.24 | Asus P4P800-X | Kingston HyperX ddr400 512mb*2 | ATI Radeon X800GTO
26) tyrion4 - 2.8C @ stock | Asus P4P800-X | Corsair XMS ddr400 512mb*2 | ATI Radeon 9800Pro
27) momochi zabuza - 2.4C @ 3.0 | Abit IS7-E | Geil ddr400 512mb*2 | Galaxy Glacier 6800
28) kenling - 2.6C @ 3.2 | MSI 865PE Neo 2-V | Kingston ddr492 512mb*2 | Inno 3D 6600GT
29) almostthere - 2.8C @ 3.22 | Abit IS7 rev. 1.0 | 256Mb Infineon -5b*2 | GeForce FX5200
30) shinjite - 3.0C @ 3.3 ES | Abit IS7-E | TwinMos BH-5 ddr400 512mb*2 | MSI GeForce 4 MX440
31) fo33il - 2.4c @ stock /color] | [color=blue]Asus P4V8-X | Kingston DDR400 512MB | MSI nvidia Fx5200
32) merzchan - 2.4C /color] | [color=blue]Abit IS7-E | 1.5 GB Kingston HyperX DDR400 RAM | HIS Radeon 9600XT 128MB Turbo Edition

Pentium 4 'B' Northwood 533FSB


1) pengster - 2.4B @ 2.8 | Asus P4P800-X | Kingston ddr400 512mb*2 | Triplex Radeon 9550
2) gmail - 2.66B @ 3.2 | Asus P4P800S-X | Kingston ddr333 512mb | Asus MX440
3) QD_buyer - 2.8B @ stock | Asus P4V8X-MX | Corsair XMS ddr400 512mb | Sapphire Radeon X1600Pro
4) wk1168 - 2.66B @ stock | Intel D865PERL | Kingston ddr400 512mb*2 | Asus GeForce 3
5) kramuse - 2.4B @ stock | MSI 645E Max-U SiS645DX | Kingston ddr333 512mb | MSI FX5700
6) rg470 - 2.4B @ stock | Asus P4P800-X | Kingston ddr333 512mb*2 | EVGA 7600GS
7) helangkawi - 2.4B @ 3.06 | Aopen AX4SPE-UN | Kingston ddr400 512mb+Apacer ddr400 256mb | GeCube Radeon 9550XT


Pentium 4 'A' Northwood/Willamette 400FSB

1) hyperyouth_firepower - 2.4A @ stock | Asus P4P800-X | Air ddr333 256mb*2 | His Radeon X1300
2) polisdirajasarawak - 1.8A @ stock | Lite-On i845 | Advance Module ddr266 512mb | PowerColor Bravo Radeon 9600Pro
3) hihihehe - 2.8A @ stock | Acer E61ML | Apacer ddr400 512mb+Transcend ddr400 256 | MSI 6600

Pentium 4 'E' Prescott 800FSB HT

1) Mowgli - 3.0E @ 3.75 | Asus P4P800-E Deluxe | Team X-Treem TCCD ddr600 512mb*2 | XFX 6800NU
2) sHawTY - 3.0E @ 4.00 | Asus P4C800-E Deluxe | Kingston ddr534 512mb*2 | ATI Radeon X1300
3) hurricane21 - 3.0E @ stock | Abit AI7 | Kingston HyperX ddr400 256mb*2 | Sapphire Radeon X1600Pro
4) mulut99 - 3.0E @ stock | Asus P4C800 Deluxe | Mushkin Enhance LVL2 ddr440 512mb*2 | nVidia 7800GS
5) ReaperOfSoul - 2.8E @ stock | Intel D865GBF | Kingston ddr440 512mb*2 | ATI Radeon 9550
6) tompok82 - 3.0E @ 3.75 | Asus P4C800 Deluxe | Kingston ddr500 512mb*2 | ATI Radeon X1300
7) barry80 - 2.8E @ stock | MSI 865PE PLS | Corsair ddr400 512mb*2+256mb*2 | PoweColor Radeon 9600Pro
8) xinghuei - 3.2E @ stock | DFI PT880ELF | Corsair ddr400 512mb*2 | ATI Radeon 9200SE
9) wk1168 - 3.0E @ stock | Asus P4P800-X | Corsair ddr400 512mb*2 | MSI 6600 Diamond
10) SkyDriver - 2.8E @ stock | MSI PM8M-V | Kingston Hynix ddr400 512mb*2 | Colorful X700
11) apexi78 - 2.8E @ stock | Abit IC7-G | Corsair XL Pro ddr400 512mb*2 | nVidia 7800GS
12) kcng - 2.8E @ stock | Asus P4P8X | Corsair XMS ddr400 256mb*4 | Leadtek 6600GT
13) Hitman66 - 3.0E @ stock | Gigabyte GA-8I848P-G | Kingston ddr400 512mb*2 | nVidia 6800XT
14) max*lim - 3.0E @ stock | Asus P4P800-X | Corsair ddr400 512mb*2 | MSI 6600GT
15) kcng - 2.8E @ stock | Asus P4P8-X | Corsair XMS ddr400 256mb*4 | Leadtek 6600GT
16) kenling - 3.4E @ stock | Abit IS7-E | Kingston D43 ddr400 512mb*2 | BFG 6800Ultra OC
17) alexandros_18th - P4 3.0E @ Stock | Asrock P4i65G | Apacer 512 + Kingston 256 DDR400 | Galaxy 7300GT

Pentium 4 'A' Prescott 533FSB

1) kabukiawie - 2.4A @ 3.0 | Asus P4P800-X | Kingmax ddr400 512mb*2 | MSI Radeon 9800Pro
2) Freak` - 2.4A @ stock | Abit IS7-E | Kingston ddr400 512mb+256mb | Asus Radeon 9200SE
3) iman_210 - 2.4A @ stock | Asus P4P800-X | Kingston Hynix ddr400 512mb*2 | XFX 6600GT
4) mr_habuk - 2.4A @ stock | Intel D865PERL | Kingston ddr400 512mb*2 | GeCube Radeon 9550XT
5) nelza_ax - 2.4A @ 3.95 | Abit IS7-EG2 | Kingston DT-D43 ddr400 512mb | MSI 6200
6) ToGo - 2.4A @ 3.0 | Asus P4P800-E Deluxe | Corsair VS ddr400 512mb*2 | Asus Radeon 9600XT
7) swhung - 2.4A @ 2.73 | Gigabyte 8VM533M-RZ | Kingston ddr333 512mb+Hynix ddr266 128mb | PowerColor Radeon 9550
8) apek - 2.4A @ 2.73 | Asus P4P800-X | Kingston ddr400 512mb*2 | GeCube Radeon X1600Pro
9) apek - 2.8A @ stock | Intel D865PERL | Transcend ddr400 512mb*2 | Galaxy 6800NU
10) RokXIII - 2.4A @ 3.0 | MSI i865PE Neo-2 | Corsair ddr400 512mb | Sapphire Radeon 9550PE
11) GameSky - 2.4A @ stock | Asus P4V8X-X | Apacer ddr333 512mb+Kingston ddr333 512mb | ATI Radeon 9200SE

Pentium M Dothan CTP-479

1) cycquest - 750 1.86 @ stock | Asus P4P800-E Deluxe CTP-479 | Apacer ddr400 512mb | eVGA 6800Ultra


This post has been edited by nelza_ax: Feb 6 2007, 08:12 PM

USEFUL INFO FOR P4 478

Details of your P4 CPU
Check all the P4 siblings n details n type of the cpu at the link above



This post has been edited by nelza_ax: Jan 2 2007, 11:12 PM

Let's compete against each other for our old skool P4 478 machine...our machine can't compare wif those X2, FX, C2D....

P4 478 HALL OF FAME [TOP 20]

SUPER PI 1M
01. nelza_ax - 2.4 @ 4.05 - 225.5mhz @ 2.5-3-3-7 - 35.641s
02. siauann - 2.8 @ 3.78 - 270.2mhz @ 2.5-3-3-6 - 36.64s
03. tyrion4 - 2.8 @ 3.78 - 216.4mhz @ 2.5-4-4-8 - 39.641s
04. raymond5105 - 3.2 @ 3.68 - 230.3mhz @ 3-4-4-8 - 39.873s
05. KahLooN - 2.6 @ 3.38 - 225mhz @ 2-3-3-5 - 39.953s
06. RokXIII - 2.4 @ 3.23 - 168mhz @ 2-3-3-5 - 41.938s
07. kabukiawie - 2.4 @ 3.02 - 168mhz @ 2-3-3-5 - 46.016s

. NORTHWOOD
. PRESSCOTT


SiSANDRA LITE 2007
. PROCESSOR ARITHMETIC
01. raymond5105 - 3.2 @ 3.68 - 9477
02. RokXIII - 2.4 @ 3.23 - 7262
03. kabukiawie - 2.4 @ 3.02 - 6780

. MEMORY BANDWIDTH
01. raymond5105 - 3.2 @ 3.68 @ 230mhz @ 3-4-4-8 - 5525
02. RokXIII - 2.4 @ 3.23 @ @ 225mhz @ 2-3-3-5 - 4132
03. kabukiawie - 2.4 @ 3.02 @ @ 168mhz @ 2-3-3-5 - 4052
. NORTHWOOD
. PRESSCOTT


This post has been edited by nelza_ax: Jan 2 2007, 11:21 PM

again and again..............

i think can start the discussion edi..

Ceh my name not in the list. Ptuik

juz want to share mine...
old skul p4..now still using it


Attached thumbnail(s)

waaaa..dun be angry..juz handled this thread...ask siauann lar..
btw can u gimme ur spec plz..
will update later..

This post has been edited by nelza_ax: Jan 2 2007, 11:30 PM

Wakakaka...
How come not in the list?

Maybe because u didn't post you're spec meh?

Seriously, that's the funniest post i've seen this week...

Man, jelesnya aku...
Kalau la aku ada keberanian macam ko, aku nak gak lapping IHS processor Pentium D 930 aku, tapi tak berani, takut nanti tak rata la, takut nanti ada static shock la...

Takut beb...

Tapi aku seriously nak buat camtu, nak gak turun 1 - 2 degress sebab lapping IHS processor aku, sebab tgk IHS processor aku kasar gila...

This post has been edited by sHawTY: Jan 2 2007, 11:32 PM

wow... lapped P4!

nice...

Got edi leh boss, ask irangan. He saw my first post in the old thread. Anyway refresher course

Pentium 4 Northwood 2.8C@3.22Ghz
Abit IS7 rev. 1.0
2*256Mb Infineon -5b
GeForce FX5200

linked for justice: http://forum.lowyat.net/topic/312068/+2040

This post has been edited by almostthere: Jan 2 2007, 11:41 PM

act, the temp, dun hav much different than before.. juz a lil bit..around 2-3 degree ony maa.. not worth for you to do it.. too risky..lain la klu kaya sgt..
if you dun dare then...jangan buat..
pentium D wooo.. not old skul p4..

nelza ur da man
thx for continuing the spirit of P4 478
well..its up tp u to handle it now...

ic ic..everything update edi....
btw, i dun thing 3.22 is the max rite? wat a nice moob you hav there


kinda hard oso to handle..
but i'll try ma best..

This post has been edited by nelza_ax: Jan 2 2007, 11:48 PM

Weh, 2-3 degress differences is not something that we should take lightly...
2-3degress dude!!!

I also want one!!!

But just like what you've said earlier, i'm so afraid to do it...
Benda paling aku takut, takut takut kalau dah lepas lap, makin tak rata ada la...

Ehh siauann, since the V3 is already up and running, i think you should close V2 liao...

V3, this proves that Intel Pentium socket 478 processors are still hot to us, not something that can be forgotten easily...

Lazy to take back my barang otherwise I'd try summore but limiting me is the RAM and the PSU. Caplang -5b's and Powerlogic 600W PSU. Not stable beyond that speed. 3.6Ghz can POST but unbootable

y dun you find a faulty proc and practice 1st?
safety 1st

okok..time to shut it down...

Update mine, processor is 3Ghz HT ES, running at 3.3Ghz now

This post has been edited by shinjite: Jan 3 2007, 01:40 AM

still using BH5?mind to post some sperPI result?

This post has been edited by nelza_ax: Jan 3 2007, 04:16 AM

aiyark..forgot edy..need to go back to my hometown for 2 weeks during my holiday..
no internet connection there.. goin to cc is sux!!.. but i'll update dis thread slowly..
sorry for that..


keep on rockin soc 478 user!!

Actually I used to use BH-5s, now no more, sold it off already
Looking for D43s now~~

Edit : My twinmos is not BH-5 chips, normal Value RAMs (using 5:4 ratio) and my GFX has been changed to Nvidia FX 5900XT (forgot to update)

So fast comes to V3 already. shinjite,last time you use BH5 how far can you your RAM goes?

hoho, V3 already. s478 still rock!!

250Mhz 2-2-2-5 at 3.3V

You gto tried to go higher or not?You were using DDR booster on your motherboard?

Wow, already V3?
S478 still goin strong as ever, bravo.

didn't go higher because need a lot of Vdimm, around 3.6V to reach 265Mhz FSB

good work nezla oh yeah my specs aint updated..mind to change my GC to 6800GS and the speed to 2.7ghz?thanx

yup, mine need to update as well, no more 9800 pro, now using geForce 3 Ti 200

i will try to push till highest using 4:5 divider and test superPI it. hehe, hope can get better result.

you proc still can go higher, use 1:1 instead
Prescott can scale over 200Mhz FSB

i know, but not stable at 170fsb++, highest can go to 180++. Too bad, the steping not good at oc. If get same steping like nelza's D1 steping, at least can pump till 3.5GHz at stock.

i try 188fsb just now, heres the screenchots




at last, 40sec.



This post has been edited by kabukiawie: Jan 4 2007, 12:52 AM

my rig



Pentium 4 2.8E@ 3.4GHz
Thermalright Ultra-120 paired with Thermaltake 120mm fan @ 2400rpm
ABIT IC7
2x Kingston d43 DDR400 @ 2.5 3 3 6
HIS ATI Radeon 9600XT
Powerlogic Atrix 500T

full load temp 69�c

cant get 39s in superpi using vista



This post has been edited by PeowYong: Jan 4 2007, 02:21 AM

I wonder why your Vcore is so high reported from CPUZ
Inaccurate reporting?

lol
didnt notice that...
i think inaccurate reporting
its around 1.50 in xp

a bit weird that the vcore is high if that is default vcore. my vcore report higher i put default. i set 1.425v, it come out 1.488v.

probably your PSU cant maintain the proper voltage. sometime if u using normal PSU, the voltage will flatuate abit.

PeowYong, i think your cpu temp is abit too high for Ultra120. it is better for you to check the heatsink contact with your processor. with ultra 120 shouldnt reach 69'c

That's normal, if you want to set it at 1.425V, you have to set it lower than what you've set in the bios, do it times & times again until the cpuz reports that the Vcore is true 1.425V [wait for 5minutes for the Vcore to be stable]

This doesn't happen to me while i'm using my Pentium 4 3.0E [Clocked at 4GHz] running on ASUS P4C800 E Deluxe

The best motherboard i've ever had for an Intel Pentium 4 Socket 478 processors

how to remove the thermal compound on the lubang..?

Can I be added to the list,I have a p4 1.8 willamette here

bros here
i goin to buy a second hand p4p800-X
any idea how i goin to test it?
thx

I found that A version proc is better in Super PI 1M compare to the E version.A version is slighly slower than the E version though.

@shawty
haha......by default vcore, cpuz reads 1.4v+- i just maintain the vcore below 1.5v coz i use stock cooler.

i also wish to have that god mobo

wao, you now bulk TR product, quite tempted to Ultra-90 ....haha...but pocket dry dry

This post has been edited by kabukiawie: Jan 4 2007, 03:18 PM

of coz slower as the fsb is lower and lack of HT, E version is 800fsb, A version is 533fsb non HT. at the same speed there is no way that A version will outperform E version in most case.

But the difference is the A version is slightly faster than the E version although the E version has higher clock speed and using 1:1 divider.A version is using 5:4 divider so resulting the RAM running at lower speed. You can refer the post screens on page 2.

Seriously, 1.488Volts can kill you're processor anytime...

similiar with a Northwood going at 1.9V

All those using dry ice or liquid nitrogen went over 2V too

This post has been edited by shinjite: Jan 4 2007, 06:44 PM

i also think so... its just few �c lower than my previous cooler,
will try mounting it again after my exam

cant get less than 41s in superpi in vista which i can get it in xp



This post has been edited by PeowYong: Jan 4 2007, 07:36 PM

woot shawty bulking TR hsf eh can the HR01 be used with s478?might get from u that or ultra90

btw for me running at 2.7ghz is it advisable if i dont pump up the voltage?
holy sh- my volts are fluctuating like hell

if your volts are flunctuating, its better to raise it a bit in the BIOS
You can calculate ler by seeing how low it will flunctuate on load from idle
Then u set it in BIOS

Ops...i didnt notice that. But i notice that i running 4:5 divider it show a little boost than 1:1. maybe i try it later. Dunno how far my ram can go....

i know, anything that obove default may having the risk.

is the ultra come with 2 version? i read from review, there are for amd and intel ultra90. hmm.....

maybe like what irangan said, reinstall it and try to see any changes. is it vista is a bit resource hungry??

This post has been edited by kabukiawie: Jan 4 2007, 09:48 PM

hey guys..i stil got no time to test out my IC7 MAX 3 its been laying in my room for so long

just tested my new ram. not bad at all. can reach 229.5FSB

p.s. anyone want to purchase 4 pieces of 512mb KVR? hehe..

i remember last time your result is around 226fsb 1:1, the new ram only a bit better than your previous ram, ofcoz now you are running 2GB ram. Ever try to push 5:4 on the cpu? maybe it can break trough 4GHz

@siauann
haha, let me try lo kidding
you want to keep it as antique in your room and let the legendary mobo collect dust?

You RAM can go up to 230MHz or not? Seems like your dream already come true. > 3.8GHz already.

haha..u wan try ka? i sell u lor...
offer me ur price lar..i sell u cheap cheap...thn u got the legendary board n top the results here

Wah siauann,your board still haven't tested out ? Get C2D and forget the legendary board already? You don't have proc and RAM to test out is it?I think many of us here are willing to try up for you.

ya i noticed that.. but at least this ram can break the 226FSB barrier. my old ram cant even break 228fsb with 5:4 divider.

no time to test that yet.

ya.... at least i know my stupid processor can break the 3.8ghz barrier. my ram ar... my comp cant go in windows if the FSB 230 1:1 divider. so either my ram cant reach 230 or my processor already reach its limit.


selling? i think my friend will be interested. btw how to define cheap

@ irangan,your proc now running at 3.9GHz sure very very shock in gaming one. Hehe,won't feel the proc lagging at all.

This post has been edited by raymond5105: Jan 5 2007, 02:17 PM

if its CE-5, your RAM still can go higher

At 230Mhz FSB 1:1, Windows can't boot, refer below

1) High chances your CPU hit wall, raise Vcore. Above 1.6V still okay 1, just don't go above 1.7v

2) Whats your Vdimm? Most CE-5 chips max out at 2.7v, increase also no gain at all

This post has been edited by shinjite: Jan 5 2007, 03:19 PM

hmm......if loosen the timing, i think it will get higher.

check this out
http://www.planetamd64.com/lofiversion/index.php/t22139.html

the average oc result for Infineon CE-5\6
2.0-3-2-7-1T - 200-220Mhz
2.5-3-2-7-1T - 240-260Mhz
3.0-3-2-7-1T - 260-265Mhz
3.0-3-2-8-1T - 265-300Mhz

seem that loosen the timing may help to boost the speed.

if can get 250fsb 1:1

This post has been edited by kabukiawie: Jan 5 2007, 05:27 PM

yeah... no lag at all.. haha..

most probably my processor hit the wall already. 1.6v is the max i can go with my mobo. Vdimm is at 2.7v.

Thanks for the info.


----------------------------------------------------------------------------------
After 2 hours of trial and error, this is the best i can get



vdimm=2.7v
timing= 2-3-3-5

Super PI=38.391 sec

This post has been edited by irangan: Jan 5 2007, 05:41 PM

haha...yeah..so sad...i got no time recently for pc..even my C2D oso dun have the extreme mood to oc like last time my P4 478


how i define cheap? im not using it anymore..tat's y selling cheap
n how much do u thk this board gonna be? rm150 do u thk its cheap enuf for tis good board?

yeah my volts are fluctuating like mad i raised my vcore from the stock of 1.525v to 1.55v already..and its changing from 1.568-1.616v damn my lousy psu

erm btw is it normal for the mhz to fluctuate also?cuz i've set my fsb to 150 which should be 2700mhz but when i open cpuz its like sometimes 2760mhz sometimes 2700mhz

i will inform my friend about this... RM150 is cheap

your vcore flatuate is due to your PSU. get a better one la. Acbel is cheap and nice

yes, cpu speed do flatuate but not so serious like yours. your mhz faltuate that much is directly due to your PSU and that is not good for your comp

Wao, that is sweet. i notice your performance mode is disabled, have you try to enable it?? It may boost a bit.


150?? its cheap.


This post has been edited by kabukiawie: Jan 5 2007, 08:09 PM

siauann you MAX 3 only selling for RM150 ? That's preety cheap . irangan, seeing your RAM running with 2.0 latency,the performance is improved man.

yeah i actually already have a enermax fma purepower psu..just that it's in the process of RMA now now no choice have to use this capalang powerlogic psu

so in short if the volts or cpu speed fluctuates too much it'll damage the proc/mobo?

is the OC result for AMD system?
i think intel system can't achive that!

ASUS board tend to overvolt a bit during idle. Its normal throughtout my experience. However for my Abit board, terbalik, voltage goes down like hell >.>"
As for your Mhz a bit higher than expected, it is due to the spread spectrum. Normally it is recommended to disable it if OC but if its stable then let it be.


2 factors causes flunctuations, PSU itself and the motherboard. As for my case, its the mobo, if I get even a 500W also the same thing unless I do a droop mode which I dunno how to do >.>"


You won't know unless you try
Even some TCCD got 300Mhz FSB 1:1 on Intel systems but sadly its quite picky

But mostly all rams works well with AMD, I dunno why

oh okay..yeah i remembered last time i disabled my spread spectrum on my msi board..forgotten what it does edi so should i disable it now?wont affect much right

hehe..cheap sales...mega sales...
i need to test the board 1st

Won't effect much

like what you said, asus mobo really overvolt when idle. when load, it drop back. hmm......

enable and disable spread spectrum not much different to me. i disabled it already.

even though the result is for amd, i think the outcome is almost the same. loosen the timing seems help to push higher, maybe irangan's ce-5 can go 250 at c2.5. now have good ram in hand, it better that find the max fsb 1st instead of tighten the timing. after reach there, tighten the timing to squeeze more. just my 2 cents.

the thing is whether irangan's CPU can go or not only. HIs Vcore max at 1.6v which is a limitation. Vdimm no problems already at 2.7V

yeah..wonder how fast it is...250mhz 2-2-2-5
post some super PI result lar...

seems his cpu like stuck at 3.9GHz, if can push till 4GHz++ sure rocks. At 250fsb 1:1 sure can get 36s or less in super PI 1m. cant wait for his result.


@nelza-ax
last time hows the temp for idle and load on HFS last time?? i afraid the cpu fried if push to high. planning to add more vcore. hehe.....

pm me if you wan to sell it

erm..dun remember ar..but not much different when using hsf and WC..
i'm still 0n ma holiday,neway i'll find the screenie later..

How to post? Sold off already

haha.....you aiming his gem....

wait your screenie......

Any Intel i848P chipset users here? Want to ask, what're the highest supported P4? P4 EE with HT?

This post has been edited by David83: Jan 6 2007, 05:48 PM