Wakakaka...
How come not in the list?

Maybe because u didn't post you're spec meh?

Seriously, that's the funniest post i've seen this week...

Man, jelesnya aku...
Kalau la aku ada keberanian macam ko, aku nak gak lapping IHS processor Pentium D 930 aku, tapi tak berani, takut nanti tak rata la, takut nanti ada static shock la...

Takut beb...

Tapi aku seriously nak buat camtu, nak gak turun 1 - 2 degress sebab lapping IHS processor aku, sebab tgk IHS processor aku kasar gila...

This post has been edited by sHawTY: Jan 2 2007, 11:32 PM

Weh, 2-3 degress differences is not something that we should take lightly...
2-3degress dude!!!

I also want one!!!

But just like what you've said earlier, i'm so afraid to do it...
Benda paling aku takut, takut takut kalau dah lepas lap, makin tak rata ada la...

Ehh siauann, since the V3 is already up and running, i think you should close V2 liao...

V3, this proves that Intel Pentium socket 478 processors are still hot to us, not something that can be forgotten easily...

That's normal, if you want to set it at 1.425V, you have to set it lower than what you've set in the bios, do it times & times again until the cpuz reports that the Vcore is true 1.425V [wait for 5minutes for the Vcore to be stable]

This doesn't happen to me while i'm using my Pentium 4 3.0E [Clocked at 4GHz] running on ASUS P4C800 E Deluxe

The best motherboard i've ever had for an Intel Pentium 4 Socket 478 processors

Seriously, 1.488Volts can kill you're processor anytime...

Who told you it's the best?
There's many more socket 478 motherboard that can beat that motherboard easily.

There's:
ASUS P4P800 Deluxe
ASUS P4P800 E Deluxe
ASUS P4C800 Deluxe
ASUS P4C800 E Deluxe

Abit IS7
Abit IC7
Abit IC7 Max 3

These are just a little numbers of the best motherboard for socket 478.

P4P800-X is the best?
I laugh out loud.

This post has been edited by sHawTY: Feb 21 2007, 09:01 PM

It will last for a longer time if you put it to a good use.
Well, maybe most of them doesn't fit with new hardwares such as PCI-e cards and some other things, but then, you can still use your s478 rig until it's really really dead what?

Ehh, V3 also going to 2XXX post d.
Socket 478 really do last longer than any intel processors eyh?

Ahh, USUS Pentium 4 boards, tried most of their Intel 865 & 875 boards before, but none of them beat the performance of P4C800-E-Deluxe.
It's the best of the best of all USUS Pentium 4 boards.

This is some of the USUS Pentium 4 boards i've tried:
P4P800
P4P800-X
P4P800-VM
P4P800-SE
P4P800-Deluxe
P4P800-E-Deluxe
P4C800
P4C800-Deluxe
P4C800-E-Deluxe

Now, to whom did i sold my P4P800-E-Deluxe & P4C800-E-Deluxe

This post has been edited by sHawTY: Aug 12 2007, 10:02 AM

It's ASUS lar, i call it as USUS.

Apa no good, i've used it before lar, quite okay what, manage to oc my 3.0E to 3.8GHz oso.
@BurgerRI
Didn't remember well anymore, have been a very long time since i left socket 478.

FYI, when i'm using all those motherboard that has "Deluxe" name on their motherboard, i manage to overclock my ram to 533MHz at only 2.8 volts.

Stable Prime too.

I overclocked my Pentium 4 3.0E to 4GHz and the ram to 533MHz @ 2.8Volts.

And guess what type of ram i'm using that time.

Jeng Jeng Jeng!


Even if u have a very good ram such as those ram that uses BH-5 chipset but you coupled it with chapalang board, your ram won't oc much too,

One time when i have OCZ that uses BH-5 with the Ram Booster, i coupled it with P4P800-X, it won't work, oc just a lil bit only.
But when i change the board to other boards that has the "Deluxe" & "E-Deluxe" the Kingston Valueram oc sky high up to 533MHz [266MHz]!

what's important is your motherboard itself.

Hey!
Look at the first page!
I'm still the highest at 4GHZ!

Too bad that time i don't run Super PI, else i could beat all the scores in the first page.

This post has been edited by sHawTY: Aug 12 2007, 09:02 PM

Hey fylon, once you've gotten your Deluxe, i dare you to beat my score!

Oii, what the hell are you talking about man, that time i oc my 3.0E to 4GHz i'm using the ICute Twin Fan 450W psu also lar.
Chapalang PSU liao.

As i said earlier, it's teh motherboard itself.

So, what board are you getting from Ebay?

Owh well, i came to this thread because i miss my old socket 478 PC.
It's the easiest to overclock. Seriously.

You don't have to play with NB voltages, can oc kaw kaw with just the stock NB heatsink.
And best of all, i can oc my 3.0E kaw kaw with just using a crappy Kingston Valueram that uses crappy chipset, not even TCCD.

If i have a lot of money that time, i wouldn't want to sell my 3.0E, P4C800-E-Deluxe & the Kingston Valueram, i love em.
But then, that time i don't have good source of income, so i had to sell it to upgrade my system to LGA775 & PCI-e

That time i have P4C800-E-Deluxe & P4C800 Deluxe.

Both boards are able to let me OC my 3.0E to 4GHz with just using valueram and chapalang Icute PSU.
No need to seek high performance ram and don't spend a lot of money to get good PSU.

I miss my socket 478 hardwares.

Oi Socket 478 kaki's, start a new thread.
This thread has reach it's limit by exceeding 24XX post d.

I don't have the power to control you guys, just giving advice before this thread is closed by the mod ler.