TX-2 is more recognized than TX-1 for sure .. and the reason is it performs on par with AS5 and MX-2 ...

I'm using it myself and find the result is just impressive as MX-1 and AS5 ..

yeah..akcely i already thinking to get 1 tuniq tx2..i found reviews say that tx-2 has d same performance compared with mx-2, if not slightly better..plus its cheaper too..im going to buy it at robyncom tday

---

Added on February 15, 2008, 11:11 pmhi again..oready apply tx-2 to my rig..and indeed the temp dropped around 48C load temp after oc at 3.2GHz..but that is acording to everest..bios gave 40-42..is it normal for bios to give diffrent temp compared to programs??thx

This post has been edited by matyrze: Feb 15 2008, 11:11 PM

Yo bro, how u get the BIOS load temperature ... ??

Usually in BIOS mode, CPU is not stressed so the temperature may not rise to load condition ...

haha..sory wrong info..everest showed 48 at idle 50 at load..n yeah everest detect d diff is only 2 degrees btween idle n load..bios still read 38-40

hmm I wonder the internal sensor chip is functional correctly or not ..

You could try ur CPU and cooler on another mobo and check out the temperature.

see whether it shows the same result as your current mobo or not ..

orait..i'll try to change mobo..thx

This post has been edited by matyrze: Feb 17 2008, 01:31 PM

Hello all, can you solve my problem. Below is my computer specification:

Pentium D 940 3.2Ghz, 800Mhz FSB, 2x2MB L2 Cache
Intel D945PLRN motherboard
Kingston 1GB*2 DDR2 533Mhz
Leadtek Winfast PX6600GT TDH
Western Digital 160GB
Seagate 250GB
Western Digital 320GB

And my computer temperature

Motherboard-50C
CPU-60C
GPU-55C
Western Digital 160GB-50C
Seagate 250GB 47C
Western Digital 320GB-52C

Here is my question:-
1)Is these normal temperature for my computer?
2)I have bought a Cooler Master Sphere for CPU Cooler, but nothing change to my CPU temperature(compare to stock) since i was install on it
3)Should i change my CPU cooler, if yes, which Cooler Master CPU Cooler suitable for my PC.

thank you

Mmmm...your cpu temp quite high...make sure the temp not exceed 70 for safety... I think u should choose better thermal paste...try MX-2 or tuniq TX-2..

First of all, the temp for the CPU, mobo and the hdd is pretty high...you say you buy CM Sphere to replace the stock cooler, how you install it? di you apply any thermal paste? did you apply it in correct way?

try arrange the cable in your casing, this will make the air flow better which will result in a better temp...did your casing have any intake and exhaust fan? if no, try to get one...

as for the hdd temp, if you have a good air flow and have an intake fan which blow thru the hdd, the temp will reduce...if the temp still very high, you can try those hdd cooler...pretty good in cooling your hdd...

thank you for replay my post
I am re-install the CM sphere but the templerature still the same, don't know what was wrong on it
don't know what should do with my CPU cooler, is waste my money
my casing have two fan behind on it, one is come from power supply unit... and the other one is on the casing.
iHDD cooler, pretty intersting on that

my specs are as my siggy is and the question is..
it ok if my proc temp..

Idle: 41-42c
Load: 64-65c

btw my proc is oc a bit by 25% only..

try to remount and reapply the thermal paste..make sure there is good airflow in the casing

This post has been edited by alive88: Feb 26 2008, 05:28 PM

i just got my new c2d. jsut wondering which temperature to follow?
Cause the core temperature is 55C and the cpu temperature is 41


Btw which do u guys would prefer, thermalright ultra 120 extreme or Scythe SCNJ-1000 Ninja


This post has been edited by tyss: Feb 26 2008, 09:43 PM

Core temp.I think 9.5 is more accurate from my personal experience.Thermalright is better but Xigmatek SHT1283 or Tuniq Tower 120 offer similar performance for less price.

been looking for this 2 cooler Xigmatek SHT1283 or Tuniq Tower 120 still confuse which one to grab....

oh, so the ninja is not in the same league as the thermalright , xigmatek and tuniq?

Core Temp 0.95 shows around 10C lower than actual temp i think...

what is core temp 0.95? a software?

Yes.

12345678910

This post has been edited by tomatos: Feb 27 2008, 06:58 PM

haih ... i'm a bit frustrated.
why is it with arctic freezer 7 pro on 3GHz c3d e4300 the temps are 46'c @ idle and 68'c @ load (using ac mx-2) ...i feel something is wrong

tried to re-sit the proc & hsf 2-3 times and it's the same ..
everything seems tights/firm to me ... and my casing is an open-case