Outline ·
[ Standard ] ·
Linear+
Problem with temperature? Seek consultation here, DO NOT OPEN NEW THREAD
|
TSkcnyc
|
 Jan 22 2006, 02:25 AM, updated 19y ago
|
|
This thread is for consultation regarding temperature issues which includes: - cpu temp - system temp - gpu temp - chipset temp - hdd temp ...regardless any brand of parts you are using. Strictly discuss about your temperature issues. Others may help/suggest the solution. If you just want to ask about what cooler is suitable, refer to existing " Air Cooling Thread" or " Watercooling Thread". This post has been edited by soulfly: Dec 20 2006, 11:51 PM |
|
|
|
|
|
avengers88
|
Nov 14 2006, 04:22 PM
|
|
|
Guys .. my pc suddenly gone so hot ..
lol !
my proc is now 47 degree wit a scythe infinity hsf + AS5 .. previously 36 - 38
and chipset 50 degree wit a dfi stockfan .. previously 40 to 47 like that ..
all fans are in full speed ..
why like that ar ???
what happen ?
suddenly i woke up from sleep i realise the temp so high .
i din even start oc yet ..
|
|
|
|
|
|
stevenlee
|
Nov 14 2006, 04:32 PM
|
|
|
hmm what casing u using now...any different with be4 regarding the wayer inside the casing...cos wayer inside the casing might cos bad air flow...
|
|
|
|
|
|
avengers88
|
Nov 14 2006, 04:55 PM
|
|
|
i m using centurion 5 ..
duno whats wrong also..
i think before i never close my sidepanel ..
now i close edy suddenly so hot ..
now proc and chipset 52 degrees d
|
|
|
|
|
|
sHawTY
|
Nov 14 2006, 06:37 PM
|
|
|
Look at the processor uses... Does it run at high percentage? If it does, then maybe u're pc has been affected by Virus...  |
|
|
|
|
|
styloe
|
Nov 17 2006, 11:34 PM
|
|
|
QUOTE(avengers88 @ Nov 14 2006, 04:55 PM) i m using centurion 5 .. duno whats wrong also.. i think before i never close my sidepanel .. now i close edy suddenly so hot .. now proc and chipset 52 degrees d ermmm mine used to get high due to poor airflow i guess its time to switch to active cooling i guess. |
|
|
|
|
|
sHawTY
|
Nov 18 2006, 01:12 AM
|
|
|
QUOTE(styloe @ Nov 17 2006, 11:34 PM) ermmm mine used to get high due to poor airflow i guess its time to switch to active cooling i guess. Going for Water Cooling ka styloe?  |
|
|
|
|
|
styloe
|
Nov 18 2006, 01:26 AM
|
|
|
QUOTE(sHawTY @ Nov 18 2006, 01:12 AM) Going for Water Cooling ka styloe? No la gila!!!Wanna save for my future wife later maa....i cant hump my pc all my life #dude sowi cant come to ur house no transport also the maxis line like hell tried to call and sms cant sent stupid  |
|
|
|
|
|
sHawTY
|
Nov 18 2006, 03:22 AM
|
|
|
QUOTE(styloe @ Nov 18 2006, 01:26 AM) No la gila!!!Wanna save for my future wife later maa....i cant hump my pc all my life #dude sowi cant come to ur house no transport also the maxis line like hell tried to call and sms cant sent stupid Woot!!! One more forumer to follow ikan semilang's step, saving money for getting married... sHäwTY(tm)This post has been edited by sHawTY: Nov 19 2006, 10:43 PM |
|
|
|
|
|
id86
|
Nov 18 2006, 05:36 AM
|
|
|
yeah...married more important.hardly to change life partner rather than change system component...give priority to most important thing  |
|
|
|
|
|
styloe
|
Nov 18 2006, 07:28 PM
|
|
|
QUOTE(avengers88 @ Nov 14 2006, 04:22 PM) Guys .. my pc suddenly gone so hot .. lol ! my proc is now 47 degree wit a scythe infinity hsf + AS5 .. previously 36 - 38 and chipset 50 degree wit a dfi stockfan .. previously 40 to 47 like that .. all fans are in full speed .. why like that ar ??? what happen ? suddenly i woke up from sleep i realise the temp so high . i din even start oc yet .. so bro any updates>? |
|
|
|
|
|
hahaha85
|
Nov 18 2006, 08:19 PM
|
Getting Started
|
Actually, my cpu temp idle is 47C and full load is 63c. I jz recently installed scythe 1000p ninja plus. I am using P4 2.8E. I use back the original 120mm fans which is 1200rpm. Then wat is my problem? so hot one? I am using artic silver 5 also.
|
|
|
|
|
|
avengers88
|
Nov 18 2006, 08:21 PM
|
|
|
i'm not really sure ..
i used pc wizard 2006 , and it shows my proc is at 47 degrees ..
but when i restart and go to bios ,
it shows my proc as 37 degrees ..
its just so blurr ..
i dun know what actually happened .
lol ! but as i know , my pc is very stable and its as if nothing actually happens ..
maybe the burning proc is actually gonna go for some hibernating processors ? lol !
|
|
|
|
|
|
styloe
|
Nov 18 2006, 08:22 PM
|
|
|
QUOTE(hahaha85 @ Nov 18 2006, 08:19 PM) Actually, my cpu temp idle is 47C and full load is 63c. I jz recently installed scythe 1000p ninja plus. I am using P4 2.8E. I use back the original 120mm fans which is 1200rpm. Then wat is my problem? so hot one? I am using artic silver 5 also. well prescot temp shud be high.maybe u put too much AS5 i guess?1.2k is kinda slow tho. |
|
|
|
|
|
conchunchun
|
Nov 18 2006, 08:46 PM
|
Getting Started
|
If i change the fan to above 5k rpm...the temp will drop or not? coz i put at my table fan facing the cpu, the cpu temp does not change....
|
|
|
|
|
|
styloe
|
Nov 18 2006, 08:51 PM
|
|
|
QUOTE(conchunchun @ Nov 18 2006, 08:46 PM) If i change the fan to above 5k rpm...the temp will drop or not? coz i put at my table fan facing the cpu, the cpu temp does not change.... no need for that just get those fans with good cfm like Vizo perhap.not too loud but has a good airflow |
|
|
|
|
|
styloe
|
Nov 18 2006, 08:52 PM
|
|
|
QUOTE(avengers88 @ Nov 18 2006, 08:21 PM) i'm not really sure .. i used pc wizard 2006 , and it shows my proc is at 47 degrees .. but when i restart and go to bios , it shows my proc as 37 degrees .. its just so blurr .. i dun know what actually happened . lol ! but as i know , my pc is very stable and its as if nothing actually happens .. maybe the burning proc is actually gonna go for some hibernating processors ? lol ! thats weird mine not far off actually in my bios my temp is higher than in window.ermmm strange  |
|
|
|
|
|
avengers88
|
Nov 18 2006, 10:49 PM
|
|
|
aiyo then how ? duno which one to trust .. LOL !
|
|
|
|
|
|
Doom
|
Nov 19 2006, 12:22 AM
|
|
|
If ur mobo comes with MOBO utility software such as Asus, Gigabyte and MSI ... u could try it out ... usually it support temperature and fan monitoring..
or maybe u should clean up the heatsink and the fans.... after that apply a thin and even layer of AS5....
|
|
|
|
|
|
sHawTY
|
Nov 19 2006, 12:24 AM
|
|
|
QUOTE(avengers88 @ Nov 18 2006, 10:49 PM) aiyo then how ? duno which one to trust .. LOL ! I've heard that Speedfan and TAT is the best, but me myself never tried those software before... Maybe u should try using either one of those...  |
|
|
|
|
Quote
0.0271sec
1.11
6 queries
GZIP Disabled