hullo guys..
wanna ask..im using dfi lanparty dk t2rs mobo and has oc my 6750 to 2.9GHz..my prob is d bios is showing diferent reading from everest..my bios shows cpu temp is aroun 38-40..but after start up everest reading is as much as 55..y ha?if i oc a bit more, say 3GHz then it would hang..
thx for ur help

i used speedfan..n it shows d same reading as everest..and for the cooler i use xigmatek s1283

This post has been edited by matyrze: Feb 14 2008, 05:14 PM

orait i will try 1 good TIM later..thx

yeah..akcely i already thinking to get 1 tuniq tx2..i found reviews say that tx-2 has d same performance compared with mx-2, if not slightly better..plus its cheaper too..im going to buy it at robyncom tday

---

Added on February 15, 2008, 11:11 pmhi again..oready apply tx-2 to my rig..and indeed the temp dropped around 48C load temp after oc at 3.2GHz..but that is acording to everest..bios gave 40-42..is it normal for bios to give diffrent temp compared to programs??thx

This post has been edited by matyrze: Feb 15 2008, 11:11 PM

haha..sory wrong info..everest showed 48 at idle 50 at load..n yeah everest detect d diff is only 2 degrees btween idle n load..bios still read 38-40

orait..i'll try to change mobo..thx

This post has been edited by matyrze: Feb 17 2008, 01:31 PM

greetings,

my fren recommended me to use core temp to measure my cpu temp coz he said it is good..

my temp result at full load for d cores is:

coretemp : 60,60
evrest, speed fan : 47,47

y there is d difference between those readings?im using e6750..
there is oso difference when idle..

can anybody xplain my situation?

thx