I am from the southern will get second opinion from other workshop,thanks bro

If southern, you can go to Ang Lee near Skudai, or Overhauling at Masai. They can help you on this. Let us know the update.

Ok bro thanks

I replaced my 408 windscreen side rubber trim DIY.
I purchased the trim from Shoppe. Cost around RM250.
Here is the video Replacing Peugeot 408 Windscreen Side Rubber Trim .

Hopefully you will find it useful.

Rm250 is very expensive. I bought 2 pieces at about rm50 including postage from China. Not original though

RM50 per pair is very2 cheap. But I don't know how to purchase from China direct. Did you get the clips as well?
.
According to the packaging label, mine is original parts.

can get from taobao / aliexpress ..
fyi yours is from china too ..

Yes it is from China.i guess the whole Peugeot 408 components from China except the remote key. Ha ha ha

This price is still better than the SC cut throat price

bro i bought my remote keys from china too, just that need to bring to local shop to program it ard charges RM100 (still cheap tho compare to current market price for a set of key fob)

The rm100 including cracking the pin code from BSI or they just simply duplicate a new key from your old key without deactivating old key?

Mind to share the keysmith info btw?

Sorry bro wasn't quite sure your technical term, they will use a odd device and program it to the remote keys.
Are you at johor bahru?
Its called kedai logam setia indah

Alright thanks. Normally to pair a new key the car will ask for pin code before you can proceed.

Rm100 sounds like a good price. We can't get the price in KL.

You're welcome bro, I believe the guy managed to pair it perfectly with his device.
Tyres and some parts cheaper at KL 😂

Yours is 1.6 or 2.0?

(WTS) Power Steering High Pressure Hose with switch

Suitable for peugeot 408 2.0
Genuine parts, bought from CT Auto Spare Parts
Location : Johor Bahru
Reason to sell : Wrongly bought
Selling RM500

*ITEM NO 1*

...wow Pug 408 thread still active

Hi guys, I have a 1.6t (2013 model) just curious any ideas on causes of engine oil losses ? Also, my car tends to hover abit during the 2nd gear, when I accelerate it tends to hover around 2000 to 3000 RPM before shifting into 3rd gear, any idea on the cause of this ? And also how are you guys fairing with your pugs after these few years.

engine loss for alot or just minor reduce ? when car enter safe mode, it will become like this .. feel like gear box very lazy .. (when check engine light)
for my case, i normally maintain my car at renautech (u may google the address, have 2 branch) ..
i would not say is cheap but they maintain the car is more professionally than the 4s..
maybe u can send your car for a check ..

Oil loss of about 1 litre every 5k km seems normal for this engine.

My 1.6T gear shift around 2300 to 2500 depending on throttle. It will hesitate to gearshift even more when going downhill.

Oil consumption above 1lit/5kkm needs workshop attention. Any amount below this is normal for Prince 1.6T

Your gear changes are normal. This is adaptive GB, hence it has adapted to your style of driving. This is normal for urban driving. If this happens when acceleration on country drive, then it may be GB issue.

No worries bro! Enjoy your Lion, all's good!