2hp is enough

16 degree it will cut off????? Inverter compressors never never will have cut off in their dictionary. Inverter compressors never will stop. Only runs high load or low depending on the temperature. That's a joke to me if a panasonic tech guy tell me this issues. Please. Ask the previous guy to check the refrigerant. Please be beside him to look at the gauge if there's at least 140psi. Coils frozen only happenes when refrigerant running at 30psi. I think your air con guy take down and wash and install back there's a leakage.

Why so expensive to repair? It probably the thermostat faulty cause the compressor keep pumping. The evaporator too cold till keep ais and block the airflow.

All the aircon produce really cold air. There is no fake cold air.

What you really want is the aircon size. Get the over size aircon.

BTW guys, how much would it cost to install 2.5hp inverter aircond with gas refill.

I just got charged RM810!!

got conned larr havent pay arguing still..

Installation RM380 ( 0 feet piping)
8 feet piping RM 160 ( 8 x RM20)
Gas            RM 150
Wiring        RM 120  (add 1 meter wire ny)
huh!

ada hacking?

weird that there is a 380 installation fee if you are paying for him to install everything seperately.

so AC is just sitting there? or this is after install. how you didnt pay and still arguing and post on LYN? the guy balik already?

normal hole at wall in hall for piping to go out..

he installed gave bill to parents at home n left. ask me to deposit to his account.

kao. thats really crazy lah. not sure how to move forward. hope other sifu's can help. but wanna ask, where did you buy it and where you found this guy?

friend was moving out so i bought his aircond n brought it to my home. he already had someone to dissemble it.

This guy another friend gave contact, so i called him come to fix. but this charges are bizarre...

anyone can suggest wats average charges for me to nego on??

Hi Sifus,
Do I need to change to a new piping for R410 non Inverter Aircon? I am currently using a non inverter R22.

Any advise is greatly appreciated

Thanks

Standard installation for R410

1hp, 1.5hp RM250 + 10ft piping + 10ft drain pipe
2hp, 2.5hp RM350 + 10ft piping + 10ft drain pipe

Wiring + switch with 15ft casing RM150

Refrigerant R410A top up RM150

Thanks mate

Hi Sifu's

Was thinking of the option of multi split type since i kinda have a space issue and heat that is generated from having 2 compressors running at the same time.

Wanted to know is it truely a good option to work with? besides the fact that if there is an issue with the compressor then 2 rooms will have a problem instead of one, is there anything else to know about this type of aircon?

http://www.daikin.com/products/ac/lineup/split_multi_split/

http://www.fujitsu-general.com/sg/products/multi/index.html