Alright, thanks for the advice!
I shall join the faster side of UniFi tomorrow

Goodluck.

Why do I always get constant 10%~20% packet loss in CS:GO in the afternoon and 20%~30% loss in the night? Do unifi have a bad connection to Valve servers?

Doesnt happen on my Maxis Fibre line..

Can anyone help me? I am trying to log on to my Unifi router (Innacomm RG4332) via telnet. But I get "Login incorrect" error whatever I fill in.
I've tried my username+pass that I use to log into the router via webbrowser.
Iv'e tried to use the usernames: operator, admin, and Management, together with passwords: h556UniFi, h566UniFi, telekom, (blank), admin. I've tried all combinations of these without luck.

I'm guessing they have a new password now? Does anyone know it?

If I remember correctly, the web login name is admin and no password required. Just leave it blank and press Enter.

I used the crappy RG4332 for only two days before I replaced it with an ASUS RT-N12 D1.

yea got a called get discount for rm 10 on bill
so its rm139 @vip5 but but 2years contract renew...haiz guess its worth it...since not much problem in this 2 and a half years service and free replacment on spoiled modem...

This post has been edited by tlts: Aug 31 2014, 09:21 AM

also, no relocation fee FOR LIFE should you move to another location...

really as advertize i mean the STREAMING KING thinggy.....full HD on any streaming no waiting..kudos unifi

I can log into the router no problem using web. But I want to log in using telnet and as operator, because I want to recover my unify pass.

Just call Unifi Customer Support at 1-300-88-1221 to ask for your password.

some noob quetions

i want to subscribe to auto pay, the unifi account belongs to my father names, i will use my credit card to do auto pay

in this section *Relationship of the Billing Account Owner and the Bank Account Owner
i should select Parents or Children?

better call cs to ask......

Just bought ASUS RT-N12 at lowyat and the result is huge!
Stable wifi with really good ping difference compared to stock router.

Really recommend this router, only cost me RM125.

and not to mention the setup is really easy! No problem with hypptv.

This post has been edited by cipollll: Aug 31 2014, 06:54 PM

Another happy RT-N12 D1 user.

is that me only or unifi is freaking slow lately?
tried to reboot/reconnect router to grab ip range like 175, 210/220, 115, slight improve on 175 range but still slow like crap,
even my maxsh*t 3g is faster. previously it load lyn.net in a snap, now it take 5+ seconds to load

do u guys encounter same problem?

No.

Mine loads in a snap.

Are you connected via Wi-Fi?

yup
the DLink router wifi rosak so i put a TP-link (crap product) AP
ping time to AP from 4ms to 100ms
ping to router oso similar
but ping to google.com damn teruk ... like 200+ ms to 3000+ ms
last last week still ok, just this few days connection like sh*t .. open whatever also slow, even 3g is much faster
i can't even view/send a picture from LINE if using unifi ... haih


:::edited:::
weird... wifi on dlink suddenly work again...
now directly connect to dlink's wifi ping time befome single digit ms ...
speed backt o normal adi... but coverage damn bad la
nvm waiting for my mi router to arrive then replace the blardy dlink

This post has been edited by LickGuy: Sep 1 2014, 12:34 AM

Hi guys,
I just bought TP Link WR841ND.
But I have some 1 prob, my hypptv now some got signal and some do not have signal.
Have someone encounter thsi kind of problem before?
Called customer service, they just refresh my port then still the same.
Internet all working perfectly.

Hey guys, I recently bought a TL-WDR3600 router. I wish to put it in between the UniFi modem (TBU) and the UniFi router (INNACOMM RG4332).
The problem is, I can't get it to work. There is router connection, but no internet connection when I plug my PC into my (WDR3600) router.

I have installed dd-wrt on the router, and followed all instructions here: http://klseet.com/index.php/tp-link-ddwrt
I enabled vlan tag of 500 on the WAN port (vlan 2 port), and set it (vlan 2 and vlan 2.5) to unbridged mode. Anyone has any idea why it still doesn't work?