4got to ask, my gskill chip if nt wrong shld be micron D, is tis a clockable chip ? D9 = fatboy ?

400fsb ? DDR800 ? sure bo ? mostly can't reach tat high in 1 shot leh...i guess.

fatbody discontinued edi loh..now d9gmh and d9gkx(iirc) is the best d9..

try first lar..no harm 1 mah..and go to read this thread

edited:ur gskill ram default was ddr2-800 edi..don need to worry..and i think tat is d9gkx

This post has been edited by coolice: Sep 12 2006, 11:36 PM

noo...bro, mine is 667 leh nt 800 sob sob...no $$$

Any D9 can do over 800 easily.
Heck, even my old skool DDR533 kit can do over DDR800 easily... D9s of cause.
Don't let the numbers fool you. Newer D9s can do over DDR1000 easily

if mine can do 1:1 ddr800 i'm hapi ordy...

ok, i try 1st....come bk later...

thanks all

if urs if the d9 one, sure can do >900 maa...my kvr even can do >950...sure urs can...

@pcmodding
yes, my statement was wif ce1 and eist disable...cpu-z does not really show the right voltage...i'd prefer to use easytune (since mine is giga mobo), closer to what being set in bios, but then again the fluctuation wise, not sure la...that's why i also dunno which one to use...

oops...last question.

since my ram rated 3-4-3-8 DDR667, is it possible to run ddr800 with same timing ? ...noob question

Well, CPU-Z does show right Vcore on my board (TForce P965). It only gets a little cracky when above 1.5V. Checked with Biostar's monitoring tool and CPU-Z's reading is same with it...
The best is of cause to stick a DMM onto the measuring point, but I still can't figure out where to read Vcore on this damn board.

Yes... you can even run it at 3-3-3-8, provided you give it over 2.5V!
If you don't like the idea of killing your fresh RAMs, just drop it to 4-4-4

huh?izzit?i refered to ur signature..haha

bro,ur ram is wat chip?d9gkx?

i think if we increase vcore until certain vcore,cpuz will show 1.213v,anyone can confirm?
and pcmoddingmy's cpuz is showing true vcore,coz normally it will show 1.213v

speedfan does show correct vcore also..hehe
@ksl279
lower ur timing better..

you have to try it out by yourself, every ram is unique though

Nope... old skool Fatbody
But sadly, they're no longer with me anymore
Yup... looks like almost everytime I push above 1.5V, CPU-z will crap out and display 1.213V. The highest I've seen displayed correctly was up to 1.440v something..

Vdroop factor????

wanna ask ds3 user, how do i set the memory timing in BIOS? i cant see the option to change the setting.

the memory multiplier is same like divider in amd64?
how do we reconize the 2.0, 2.5, 4+ etc values?

Evogenix

hehe my latest approach :


wanna noe wads the lowest vcore for 430fsb? now i set at 1.375v

ctrl + f1 u will see it

Anyone here did the vdroop mod for the DS3 anot? Wanna know if it helped you.
It's so easy based on VR's guide that I will probably do it if I had a DS3. Just connect two contacts with a conductive pen.

gosh. what kinda cooling method you guys used? air / water?
i'm using xp120, when i prime for both core the temp shoot up to 66dCelcius. Is this normal?

Evogenix