ive tried wit easytune5 to oc until 300Mhz (default 266)...yea no problem...den i reboot and i chk again wit cpuz and spi run...it seems like reset back to default...=/
1. is dat wad easytune use for? it will reset to default after reboot?

den i tried on bios...i tweak the clock from 266 to 270 (for testing)...it rebooted twice and went in windows...den i chk with cpuz and spi run...still the default speed =/ but i chk in bios yea is tune to 270 d worr...im real noob in dis =/
2. can gip advices and xplain?

for ur info:

intel c2d e6300 stepping 6 rev 2
ga-965-ds3 F3bios rev C1
kingston ddr2 667 1gb x 1
coolermaster xtreme power 430W
galaxy 7300gt ddr3 128mb

ok thx...i will cont in that thread

i tried on bios...i tweak the clock from 266 to 270 (for testing)...it rebooted twice and went in windows...den i chk with cpuz and spi run...still the default speed =/ but i chk in bios yea is tuned to 270 d worr...im real noob in dis =/
1. can gip advices and xplaination?

den how about the fsb:dram? mine 4:5? did u guys tune it after/b4 u oc ur cpu? Or it happens to tune itself while u oc ur cpu?

for ur info:

intel c2d e6300 stepping 6 rev 2
ga-965-ds3 F3bios rev C1
kingston ddr2 667 1gb x 1
coolermaster xtreme power 430W
galaxy 7300gt ddr3 128mb

lol they don seem to lend their hand on my problem...

yea i disable eist d...i can tune up to 306 fsb in easytune...more than that will be rebooted automatically...i wonder how to set the 1:1 ratio...? my current ram timing is 5-5-5-15 | ratio 4:5 ... jz tune the cas,tras, etc means ratio tuning d? i jz play wit memory boost in bios setup --> turbo...it seems cant boot up to windows...lol

i wanna ask how much ds3 - f4 can oc at stock? i did try 300x7 but it hung twice in 5 hrs...dun think is too hot...coz in air cond room...temp oni 40 ram ratio 1:1 but oni normal value ddr2 667 2gb...

remysix, at stock vcore u can oc how much fsb for ur mobo? i tried 300x7 but it hangs quite often...i duno wads the problem...my fsb:ram ratio is 1:1 ~_~ i wan oc more at stock b4 tune higher

oh here my spec :

ga-965p-ds3 f4 bios and stock cooler and vcore at 1.35(but cpu-z show 1.4 -.-")
e6300
galaxy 7300gt ddr3 128mb (619/819) core more than 640 then it beh tahan lol
kvr ddr2667 2gb

i nv set the vcore...in bios normal vcore i think 1.35 or 1.325...forget...but i check the cpuz 1.4+
but the normal i can tune up to 320 but not veli long...
so ur 3.36ghh run at wad vcore? vdimm le?

remysix 1.328v can go 428 fsb ma? y i nv set mine at bios normal vcore show 1.325v but oni up to 320fsb...but i chk cpuz 1.4+ -.-"

*sry double posting...forget i replied early

This post has been edited by csechuan: Sep 6 2006, 11:31 AM

ddww - oh ok...so ur current fsb run at wad vcore? and did u touch ur vdimm?
make it ratio 1:1 to oc rite?

huh? ddr2 667 is using 2.5x to be 4:5 ratio worr..i see in bios i set to 2.5x is same wit auto mode...i set to 2.0x oni 1:1 ratio

ya ma? jz now i tuned to 400fsb with ddr2 800 le...2hrs den come out blue screen reboot...(playing dota smore T__T)

i nid help T_T
yday i tried to oc for max limit using easytune5
untill 440 den it reboot le....and everything back to default setting
so i planned to set it to 420 ....den i up until 280 it kenot boot T_T
wad happen? i tried to increase the vcore le....oso kenot...but b4 dat i put normal...which could raise up to 1.42v in cpuz

so wads da problem huh?
*bios f5 problem ah? T__T

This post has been edited by csechuan: Sep 8 2006, 01:24 AM

hmm is lidat...all the setting is optimised in bios
den off eist n fan control...d others remain auto including ratio,voltage
den i start tune up fsb..until 280 den it cannot boot up properly...
the lcd display led still blinking (no display) alto booted up coz i see the kyboard numlock got led d
do i nid clear cmos to try again? T_T

ah! i noe wads d problem d...not enuff vcore...increase it den can oc up to 430 now .. =P dun dare to try more...maybe later ba

i noe f4 and f5 bios diff d...
f4 will auto jack up the vcore to 1.42v even if u put normal...dats y u can savely tune fsb without worry about vcore...
in f5 bios...u nid to increase it manually

so conclusion : f4 bios is recommended for beginner overclocker (jz as me b4 =p)

dis is my latest result
so fun overclocking

i wonder y i cant oc anymore to 430fsb... -.-
yday suddenly hang and when it reboots, the clock back to default T__T and i cant oc back to 430 -.-"

hmm...gengstapo can i ask?
u increase fsb 5 by 5? or ... ?
and when it reach a state the cpu cant boot...will it auto return back to default clock? like i tune up to 400fsb and it kenot boot le...den after 30sec i boot it again back to default clock le..

hehe my latest approach :


wanna noe wads the lowest vcore for 430fsb? now i set at 1.375v