My Superpi 1M results. These are my test setup, all on stock settings (Don't feel like OC it first). Will create my own thread for my PC benchmarks..

Processor: Core 2 Duo E6600 2.4 GHZ + Stock Cooler
Monitor: CMV 743A (17 inch, black)
Casing: Cooler Master Centurion 5 (Black)
Optical Drive: LG DVD Burner 16X
Motherboard: Gigabyte GA-965P-DS3
RAM: Patriot 2 X 1GB DDR2 667 MHZ Dual Channel Kits
Graphics Card: MSI 7900GT 256MB fitted with Thermalright KV1 Ultra
Hard Disk: Seagate 320GB SATA II 16MB Buffer
PSU: Enermax FMA 535W
Sound Card: Creative X-Fi Extrememusic
Speakers: Logitech Z-5300 5.1
Keyboard: Logitech Multimedia Keyboard
Mouse: Logitech G-5 Laser Mouse



20 secs.

aiyoh havent got it yet.
its waiting for me rite now.
the thing is, i just sold off my XTX, so im waiting for G80... haha
and i dont even have a board, so no results till after my PMR (october 6th!)

wah, you are so young yet can afford to get such a high-end rig, must be very rich

LOL! We work until siao also can't afford E6600

i need a very good mobo and ram for OC my E6300?? if Gigabyte 945 series mobo... 2x512DDR3 667 and 430W PSU. then is my spec ok to do OC??.. i will try OC soon. pls advice me.

This post has been edited by yehlai: Sep 12 2006, 08:41 PM

Darkscythe is another orang kaya here apart from irenic , keep changing hardware like i change underwear . Neway can't wait to test out my rig tomorrow, will assemble it right after my FYP presentation

3GHz at 1.280Vcore achieved! Overclock + Undervolt! Full load (10 hours dual Prime STABLE) only 52ºC!

Test Setup:
E6300 @ 30GHz | 429FSB | 1.280V
Thermalright SI-120
Biostar TForce P965 Deluxe
OCZ PC2-8000 Ti Alpha VX2 2x1GB 4-4-4-9 472.5MHz
Radeon X800XL 512MB
FSP Epsilon 700W

3GHz | 1.280V | 429.5MHz FSB | TR SI-120 (air-cooled)


This post has been edited by pcmoddingmy: Sep 12 2006, 10:02 PM

impressive! any secrets behind?

wah.. meaning u join the pc world since you r form 2 or even earlier lor?!? so young can afford so many good stuff liaw...

i though u said very good mobo?? just go for P965 or P975 lor...

No secrets actually...
You just need a good board that provides stable Vcore because if it fluctuates, it will easily error out during Prime.

Btw, it was a retail boxed E6300 processor.

ya la!!! darksythe i hate u!!! i want X6800 also!!!
so lucky that u can get the X6800 and guy i think he need help on the mobo also...i suggested him P5B Deluxe.... what u guys think about it???

I have to pump at least 1.39V to achieve that, means my DS3 can't supply constant voltage?

I need better heatsinks and RAM to hit 4ghz. Too bad, right now, capped at 3.88 only.

i tot the cpu-z vcore is kinda since if i even put extra voltage on the vcore, it will show undervolt...i dunno la

hi all is 1.4+ vcore safe for E6600 ? currently i'm on this...

That happens if you enable CE1 and EIST in the BIOS. Usually we disable them when overclocking.

anyway i do adjust in bios to 1.433 sumtin lidat...diff shldn't be too far lah..

so, wat is the safe vcore for 6600 ? i'm running in water.

1.4V at 3GHz is a little too high IMO. What's the temp? Core Temp? I bet it was over 60C, is it?
Just look at my E6300... it does 3GHz at 1.28V only. But then, mine was Allendale

Is it dual Prime stable at 3GHz 1.4V? If yes, you can try to slowly drop the Vcore as you progress.

This post has been edited by pcmoddingmy: Sep 12 2006, 11:24 PM

yes bro, it's sp2004 stable @1.4v for 14hrs.

guess i dun drop the vcore 1st...will try to clock hegher abit n c wat the outcome...

can u go further?increase vcore somemore and try higher..if cant..then adjust back ur vcore to current vcore then straight set to 400fsb and see