Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
6 Pages  1 2 3 > » Bottom

Outline · [ Standard ] · Linear+

P2P BitComet Thread, Latest:0.99, info at 1st post

views
     
TStan_pang
post Jul 7 2006, 10:50 PM, updated 18y ago

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(IMPORTANT!!)
If you still encounter slow speed download after done everything (portforward, enable DHT network, make a listening port.......)
Please refer to below link
http://forum.lowyat.net/index.php?showforum=149

if want to complain about connection problem
please go to this thread
ChangeLog: (only the latest 10 version will list down in here)
» Click to show Spoiler - click again to hide... «


BitComet user in LYN: (77 forumer in the list)
» Click to show Spoiler - click again to hide... «


QUOTE(Download BitComet)
http://download.bitcomet.com/achive/
http://www.oldapps.com/BitComet.htm
http://www.filehippo.com/download_bitcomet/

QUOTE(after install BitComet)
1. Limit your upload
For 512k user, limit it to 15kBps
1M user can limit to 30kBps
2. Portforward and allow BitComet connection in firewall
3. Enable Protocal Encryption (although it is not very useful...)
QUOTE(question about BitComet)
http://www.bitcomet.com/doc/faq.htm
FAQ by P2P forum - Best FAQ in here

How to Configure BitComet for the Best Possible Speed
Public vs. Private Trackers
A trouble shooting guide

About the XP SP2 connection limit, use latest version of BitComet can solve this problem by
Preferences > Advanced > TCP/IP Limit
at there, set your 'New Half-Open Limit' higher than 10 (recommend set to 50)

For the Max Simultaneous Half-Open TCP connections settings under Preferences > Advanced > Connection. It will be "Auto". For BitComet, it usually mean '10'. However, if you experience any slow surfing or online gaming, you can lower that value (recommended '8'). but if you didnt have any surfing or online gaming problem, and download speed in BitComet is slow, then you can try to set it to a higher value.

Resume download after change version is an easy job. usually, the task can be continue after you upgrade or downgrade version. But if you cant find the task, try open that torrent again, and save it in the same location as previous version, and choose "Download later"
at this time, hash-check again should do the trick

If you want to resume download using another client, you can try to remove the .bc! extension OR change the incomplete file extension to the other client "incomplete download file extension"...
open that torrent with the another client, hash-check again...and enjoy your download with new client!!!

QUOTE
If anyone experience slow internet browsing when using bitcomet, but the line didnt have any problem
then you may try these step
1.) Limit your download speed OR upload speed OR both
if this cant help....
2.) Reduce the value of "Max simultaneous half-open TCP connections"
set the value to any value that lower than 10, personally suggest 8...
if the value is "Auto", then make it to 8
IF, still cant help
Last, and is also the Best solution
3.) Disable the "DHT Network"


Disclaimer:
The website i given above is an old website, which it wont update again.
Gray color passage need verification.
QUOTE(Other link)
Check IP: If want to check what IP from which country, you can go to website below
http://checkip.narak.com/

BitComet official website
BitComet on Wikipedia
This post has been edited by tan_pang: Feb 3 2008, 11:21 PM
kb2005
post Jul 7 2006, 10:55 PM

Yahoo!
********
All Stars
17,846 posts

Joined: Jan 2005
I personally don't think it is bitcomet problem. What is your torrent seed and peer for each download ?
zeustronic
post Jul 7 2006, 10:58 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell
yea its quite true... those new & popular torrent are faster, coz there a lot of seeder & peers... those bit comet version don affect much....
cloudwan
post Jul 7 2006, 10:59 PM

- Knob -
*******
Senior Member
8,514 posts

Joined: Jan 2003
From: The Jungle Of Pahang
Depends on the line and seeding also ar... I'm using ver0.60.... In pahang afternoon can only get highest 13-17kbs but nite can reach 25-37kbs... but when i used it at my old office in kl near KLCC afternoon i can get 20kbs no prob... around 7pm more than that....
kb2005
post Jul 7 2006, 11:12 PM

Yahoo!
********
All Stars
17,846 posts

Joined: Jan 2005
So, pls look for torrent files with high seed and peer. This will help your dl speed biggrin.gif
cheese86
post Jul 7 2006, 11:12 PM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
using 0.63

getting around 55k++ all the time

several factor including area and your line aslo maybe cause your BT to perform badly
[N]3on
post Jul 7 2006, 11:20 PM

Go With The Flow
*****
Senior Member
790 posts

Joined: Dec 2005
From: Bangladesh
And also limit ur upload speed so that ur bandwidth wont eat up... Then u can dl faster.
TStan_pang
post Jul 7 2006, 11:22 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
another question

i hv 2 dl task that start together
1 is 3kb/s, and other is 15kb/s
but the overall dl speed is 23kb/s

why the overall dl speed is more than these 2 task speed?
Klesk
post Jul 8 2006, 09:30 AM

...
*******
Senior Member
3,469 posts

Joined: Jan 2003
dump bitcomet and go for utorrent....
TStan_pang
post Jul 8 2006, 12:06 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Klesk @ Jul 8 2006, 09:30 AM)
dump bitcomet and go for utorrent....
*
utorrent will be better?
where can dl?
kevingteo
post Jul 8 2006, 12:50 PM

New Member
*
Newbie
1 posts

Joined: Sep 2005
QUOTE(tan_pang @ Jul 8 2006, 12:06 PM)
utorrent will be better?
where can dl?
*
http://www.utorrent.com/
Franklon
post Jul 8 2006, 01:25 PM

New Member
*
Junior Member
46 posts

Joined: Jun 2006
I'm using utorrent, and dl can reach max (depends on seeder).

Previously use to use Bitcomet but found my speed like snail
Discrucio Anima
post Jul 8 2006, 01:28 PM

On my way
****
Senior Member
578 posts

Joined: Nov 2005
Depends on your Bitcomet configuration as well. Newer versions might auto-config differently (eg number of max global connections, connections per torrent, etc). And I give my thumbs up for uTorrent too! thumbup.gif
prasys
post Jul 8 2006, 02:40 PM

Heros Never Die
Group Icon
VIP
12,925 posts

Joined: Mar 2005
From: Kuala Lumpur
Thread Moved from Networks , Broadband and Streamyx Section
Sphenix
post Jul 8 2006, 02:54 PM

Hired........
*******
Senior Member
3,705 posts

Joined: Sep 2004
From: Malaysia
0.70 pretty fast, up to 60kbps the older version only 56 max
however it consume lotsa memory doh.gif 60MB sad.gif
alvin1378
post Jul 8 2006, 06:12 PM

Newbie
*****
Senior Member
967 posts

Joined: Nov 2004
0.63 and 0.70 ...

0.70 a little better ... it will set completed task to lowest priority automatically ... no nned to upload so many , then u will have higher dowload speed ...

version between 0.63 and 0.70 not so stable...
TStan_pang
post Jul 8 2006, 08:56 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(alvin1378 @ Jul 8 2006, 06:12 PM)
0.63 and 0.70 ...

0.70 a little better ... it will set completed task to lowest priority automatically ... no nned to upload so many , then u will have higher dowload speed ...

version between 0.63 and 0.70 not so stable...
*
in 0.57 also like that...
actually, all version of bitcomet also will make the completed task to "lowest" to upload...
skma
post Jul 8 2006, 09:15 PM

Occam's Razor In Problem-solving!
****
Senior Member
546 posts

Joined: Jan 2003
From: Penang, Malaysia
I don't think a particular bittorrent client will affect download speed much, aside from some differing connection protocol to trackers.

The speed is greatly dependant on the total bandwidth available smile.gif
anQi
post Jul 9 2006, 11:36 AM

Enthusiast
*****
Senior Member
757 posts

Joined: Jul 2006
From: Hidden Village of Konoha
QUOTE(tan_pang @ Jul 8 2006, 08:56 PM)
in 0.57 also like that...
actually, all version of bitcomet also will make the completed task to "lowest" to upload...
*
i use 0.68. the speed pretty fine. 60-80kBps in average. depend on ur configuration n torrent's health.
johanhakim
post Jul 13 2006, 12:05 AM

New Member
*
Junior Member
28 posts

Joined: Jul 2006
im using bitcomet 0.57. and my dl speed is damn slow. someone told me that 0.57 is fast also. im also confused. any suggestions?


Attached thumbnail(s)
Attached Image
TStan_pang
post Jul 13 2006, 02:26 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(johanhakim @ Jul 13 2006, 12:05 AM)
im using bitcomet 0.57. and my dl speed is damn slow. someone told me that 0.57 is fast also. im also confused. any suggestions?
*
even got 32 seed connected also slow like that?
i use 0.57 also like that
but after use 0.63, it turn like this


Attached thumbnail(s)
Attached Image
johanhakim
post Jul 13 2006, 05:18 PM

New Member
*
Junior Member
28 posts

Joined: Jul 2006
holy hell. thats damn fast if u can successfully finish dl'ing a 6GB file. u port forward your connection aslo is it? how did u get up to 20+ kb/s? can u help me. i port forward mine, which im not sure i did it correctly or not. its still slow
TStan_pang
post Jul 13 2006, 07:50 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(johanhakim @ Jul 13 2006, 05:18 PM)
holy hell. thats damn fast if u can successfully finish dl'ing a 6GB file. u port forward your connection aslo is it? how did u get up to 20+ kb/s? can u help me. i port forward mine, which im not sure i did it correctly or not. its still slow
*
i maybe didnt port forward...
coz all of my peers initiation is only "Local" or "NAT Traversal" only

dunno why it can like this......
maybe if i hv "local" and "remote" initiation both combination
it will be faster...

that 6GB file i dl very long time ago...
maybe aledi 2 x 99:99:99 = 200 hours
coz that speed is not always 20+kb/s...but sometime it reach 30+kb/s dl laugh.gif


Attached thumbnail(s)
Attached Image
johanhakim
post Jul 13 2006, 09:16 PM

New Member
*
Junior Member
28 posts

Joined: Jul 2006
u r using streamyx also is it? are u using any router? i cant even touch 20kb/s. damn it man. downloads r so slow
chuinhooi
post Jul 14 2006, 02:32 AM

Casual
***
Junior Member
424 posts

Joined: Jul 2005
From: Butterworth, Penang
when i am using wireless network(Aztech 600EW),the speed can reach max...
but using dlink 500g....the speed like snail...=.=

both also have port forwarding and opening dmz...
but different so big too....
johanhakim
post Jul 14 2006, 04:14 PM

New Member
*
Junior Member
28 posts

Joined: Jul 2006
chunhooi how did you portforward? do u get remote and local downloads in your bitcomet?
chuinhooi
post Jul 14 2006, 04:50 PM

Casual
***
Junior Member
424 posts

Joined: Jul 2005
From: Butterworth, Penang
QUOTE(johanhakim @ Jul 14 2006, 04:14 PM)
chunhooi how did you portforward? do u get remote and local downloads in your bitcomet?
*
yup...when using wiresless,both also get...
I just open dmz to my com intenal ip...
then port forward the TCP and UDP port that BT using... drool.gif
asura_86
post Jul 14 2006, 05:10 PM

**blank**
******
Senior Member
1,217 posts

Joined: Jan 2006
From: Kuching<-->KL/PJ
guys, i'm using BT ver 0.60 and i found that the speed is very unstable...sometimes can shoot up to 30++kbps and sometimes zero...in just matters of minutes...btw, i'm using fibre optics here...(they have this huge LAN network throughout the whole residential area) and the download speed sucks big time...(worst than streamyx i must say..)

are there any ways to increase my download speed or surfing speed? i'm connected through a router...
johanhakim
post Jul 14 2006, 05:40 PM

New Member
*
Junior Member
28 posts

Joined: Jul 2006
chunhooi,

my router configuration does not have any TCP or UDP settings. there's only TCP/UDP session or connection but in 'ms'. i have the dmz settin but im not sure of how to use it.
super macgyver
post Jul 14 2006, 11:32 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
i only donwload porn is fast until can hit 60kbps. sweat.gif
while movie only 5kbps. doh.gif:
TStan_pang
post Jul 14 2006, 11:38 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Jul 14 2006, 11:32 PM)
i only donwload porn is fast until can hit 60kbps. sweat.gif
while movie only 5kbps. doh.gif:
*
oh man... shakehead.gif
porn got many seed and peers?
so you can dl faster?

or you set that porn priority to "Highest"?
or you close all other dl task when dl porn?
johanhakim
post Jul 15 2006, 12:01 AM

New Member
*
Junior Member
28 posts

Joined: Jul 2006
holy shit 60kb/s! if like that download porn better. u mean if u set priority higher it does affect the download speed? in the windows firewall, if i add two ports for my bitcomet, one for TCP and the other UDP, is that one of the ways to port forward? i added the ports under the exception tab.
cheese86
post Jul 15 2006, 12:37 AM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
porn tend to have more seed because most of the user who share the file is either from US or Europe

where else those chinese movie tend to have kiasu ppl from asian who after download the movie will remove them from list,that why the speed suck big time,very few seed.

even i have done port-forward properly,i still getting the speed of 10k to 30,not that stable...but the overall speed is at 55k-60k with several task running together.
johanhakim
post Jul 15 2006, 12:57 AM

New Member
*
Junior Member
28 posts

Joined: Jul 2006
so i guess its pretty much the same heh. anyways ill be restless if i cant get my port forwarding done.... my dl speed is getin on my nerves. even files like 2MB will take up nearly 2 hours to dl!
cofin
post Jul 17 2006, 02:56 PM

Finally
******
Senior Member
1,727 posts

Joined: Nov 2004
From: Planet Earth
Can any one help me out by telling me how to set a correct and fastest download speed setting for your bitcomet ?? Also wat do u do to get ur maximum speed not the proxy capped thing. Anyway does norton 2006 do slow your download speed ?? I forgot wat i do to get my maximum speed last time. After i reformat my pc the speed just wont go more than 60KB/s
Atlantis
post Jul 17 2006, 03:01 PM

Casual
***
Validating
403 posts

Joined: Apr 2006
i need serious help on this too >< tumpang ur thread tongue.gif

mine just a fresh new system with 512streamyx... 600eu aztech ... without any special setting lolz ...

my bitcomet always stay between 2~5kb onli ... sometimes even 0kb ...
try for many movie also same speed ... wont be reach 10kbs also

cry.gif cry.gif cry.gif
unknown
post Jul 17 2006, 03:03 PM

10k Club
********
All Stars
12,012 posts

Joined: Jan 2003
From: Kuala Lumpur
I don't think Norton2006 will slow down ur download speeds. If u running on router mode, do port-forwarding.

unknown
post Jul 17 2006, 03:05 PM

10k Club
********
All Stars
12,012 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(Atlantis @ Jul 17 2006, 03:01 PM)
i need serious help on this too >< tumpang ur thread tongue.gif

mine just a fresh new system with 512streamyx... 600eu aztech ... without any special setting lolz ...

my bitcomet always stay between 2~5kb onli ... sometimes even 0kb ...
try for many movie also same speed ... wont be reach 10kbs also

cry.gif cry.gif cry.gif
*
Router mode? got do port-forwarding or not?
http://www.portforward.com/
super macgyver
post Jul 17 2006, 06:45 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
0.70 didnt improve speed, i now suffering 5kbps, cry.gif
whiteboard
post Jul 17 2006, 06:51 PM

Observer
******
Senior Member
1,411 posts

Joined: Feb 2005
i don't know why if i instal the 0.70 version, my norton av will prompt whether i want to permit or block this program, and each time i choose either permit or block the same warning appear again and again asking the same question, the weird thing is this not happen if i use 0.57 version any idea?
GameSky
post Jul 17 2006, 06:57 PM

Nyancat too much
*******
Senior Member
6,381 posts

Joined: Jun 2005
From: meow meow
QUOTE(super macgyver @ Jul 17 2006, 06:45 PM)
0.70 didnt improve speed, i now suffering 5kbps, cry.gif
*
same...but using uTorrent, is ok...but BitComet quite slow though o_O??...still wondering why..
super macgyver
post Jul 17 2006, 07:04 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(GameSky @ Jul 17 2006, 06:57 PM)
same...but using uTorrent, is ok...but BitComet quite slow though o_O??...still wondering why..
*
uTorrent which version is fast? u sure arh? drool.gif
GameSky
post Jul 17 2006, 07:11 PM

Nyancat too much
*******
Senior Member
6,381 posts

Joined: Jun 2005
From: meow meow
QUOTE(super macgyver @ Jul 17 2006, 07:04 PM)
uTorrent which version is fast? u sure arh? drool.gif
*
I currently using latest version of uTorrent...
super macgyver
post Jul 17 2006, 07:17 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(GameSky @ Jul 17 2006, 07:11 PM)
I currently using latest version of uTorrent...
*
can i transfer my bitcomet job to tis sw? drool.gif
GameSky
post Jul 17 2006, 07:19 PM

Nyancat too much
*******
Senior Member
6,381 posts

Joined: Jun 2005
From: meow meow
QUOTE(super macgyver @ Jul 17 2006, 07:17 PM)
can i transfer my bitcomet job to tis sw?  drool.gif
*
yes...you just delete the *.bc extension, load the original *.torrent file in uTorrent, and set where the file is currently dled...it will do the recheck and dl it after the recheck is done..

i read some info in the other forums, some clients can be set to ban BitComet users...?
super macgyver
post Jul 17 2006, 07:25 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(GameSky @ Jul 17 2006, 07:19 PM)
yes...you just delete the *.bc extension, load the original *.torrent file in uTorrent, and set where the file is currently dled...it will do the recheck and dl it after the recheck is done..

i read some info in the other forums, some clients can be set to ban BitComet users...?
*
y other want to ban bitcomet? sad.gif
samurai1337
post Jul 17 2006, 08:08 PM

@_@
Group Icon
VIP
11,594 posts

Joined: Jan 2003
From: Area 51
QUOTE(super macgyver @ Jul 17 2006, 07:25 PM)
y other want to ban bitcomet?  sad.gif
*
That was mainly because of the faulty implementation of DHT in previous versions that caused some unfair situation to other peers.

It's remained banned in many private trackers still.
TStan_pang
post Jul 17 2006, 08:12 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(whiteboard @ Jul 17 2006, 06:51 PM)
i don't know why if i instal the 0.70 version, my norton av will prompt whether i want to permit or block this program, and each time i choose either permit or block the same warning appear again and again asking the same question, the weird thing is this not happen if i use 0.57 version any idea?
*
open Norton AntiVirus Option > Internet Worm Protection > Program Control
at here, remove ur "bitcomet" at there
then, "Permit" that bitcomet 0.70 warning

after this, Norton AntiVirus will not ask the same question again and again...
prasys
post Jul 17 2006, 08:28 PM

Heros Never Die
Group Icon
VIP
12,925 posts

Joined: Mar 2005
From: Kuala Lumpur
Since its related to software side , I am moving to the right section

It could be an issue with your computer

//Moved from Networks , Broadband and streamyx - prasys
super macgyver
post Jul 17 2006, 08:47 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(samurai1337 @ Jul 17 2006, 08:08 PM)
That was mainly because of the faulty implementation of DHT in previous versions that caused some unfair situation to other peers.

It's remained banned in many private trackers still.
*
enable peer exchange brign any different in bitcomet?
vearn27
post Jul 17 2006, 10:05 PM

Doink! Doink! Doink!
*******
Senior Member
7,284 posts

Joined: Jan 2003
From: Hong Kong / Malaysia
QUOTE(cofin @ Jul 17 2006, 02:56 PM)
Can any one help me out by telling me how to set a correct and fastest download speed setting for your bitcomet ?? Also wat do u do to get ur maximum speed not the proxy capped thing. Anyway does norton 2006 do slow your download speed ?? I forgot wat i do to get my maximum speed last time. After i reformat my pc the speed just wont go more than 60KB/s
*
For Streamyx 512kbps download, approximately u can get 60~70kBps the most... and for 1024kbps download, can break 100kBps mark...

My max now is like 110kBps...

QUOTE(unknown @ Jul 17 2006, 03:03 PM)
I don't think Norton2006 will slow down ur download speeds. If u running on router mode, do port-forwarding.
*
Norton's Internet Worm Protection the killer shakehead.gif
super macgyver
post Jul 17 2006, 11:47 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(vearn27 @ Jul 17 2006, 10:05 PM)
For Streamyx 512kbps download, approximately u can get 60~70kBps the most... and for 1024kbps download, can break 100kBps mark...

My max now is like 110kBps...
Norton's Internet Worm Protection the killer shakehead.gif
*
u mean speed killer even disable it?
Irishcoffee
post Jul 17 2006, 11:58 PM

ilX / Espressivo
*******
Senior Member
2,994 posts

Joined: Jan 2003
From: Behind You
i get the fastest speed with 0.68
110kb with my 512k line
hahaha
super macgyver
post Jul 18 2006, 12:14 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(Irishcoffee @ Jul 17 2006, 11:58 PM)
i get the fastest speed with 0.68
110kb with my 512k line
hahaha
*
Do u still got the file arh? will be banned by other p2p too like 0.70 arh?
vearn27
post Jul 18 2006, 08:05 AM

Doink! Doink! Doink!
*******
Senior Member
7,284 posts

Joined: Jan 2003
From: Hong Kong / Malaysia
QUOTE(super macgyver @ Jul 17 2006, 11:47 PM)
u mean speed killer even disable it?
*
No, after disabling it... the speed is ok liao thumbup.gif

From my experience, two killers I known so far is Norton's Internet Worms Protection and also nVidia's nForce Firewall...

QUOTE(Irishcoffee @ Jul 17 2006, 11:58 PM)
i get the fastest speed with 0.68
110kb with my 512k line
hahaha
*
Hmm... by calculation this shouldn't be happening... unless Streamyx miscapped ur line... bless u tongue.gif

This post has been edited by vearn27: Jul 18 2006, 08:05 AM
super macgyver
post Jul 18 2006, 11:32 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(vearn27 @ Jul 18 2006, 08:05 AM)
No, after disabling it... the speed is ok liao thumbup.gif

From my experience, two killers I known so far is Norton's Internet Worms Protection and also nVidia's nForce Firewall...
Hmm... by calculation this shouldn't be happening... unless Streamyx miscapped ur line... bless u tongue.gif
*
my 512kbps never hit over 60kbpos ler, why? cry.gif
vearn27
post Jul 18 2006, 01:10 PM

Doink! Doink! Doink!
*******
Senior Member
7,284 posts

Joined: Jan 2003
From: Hong Kong / Malaysia
QUOTE(super macgyver @ Jul 18 2006, 11:32 AM)
my 512kbps never hit over 60kbpos ler, why?  cry.gif
*
What I did is...

turn off nVidia's nForceware Firewall and Norton's Internet Worms Protection
set porfworwarding according to http://www.portforward.com/
set EXCEPTIONAL for Windows Firewall if I turned it ON

That's all and I didnt use other security application such as Zone Alarm.
super macgyver
post Jul 18 2006, 02:27 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(vearn27 @ Jul 18 2006, 01:10 PM)
What I did is...

turn off nVidia's nForceware Firewall and Norton's Internet Worms Protection
set porfworwarding according to http://www.portforward.com/
set EXCEPTIONAL for Windows Firewall if I turned it ON

That's all and I didnt use other security application such as Zone Alarm.
*
got any chinese translation link? sweat.gif
vincent09
post Jul 19 2006, 12:43 AM

*~ When I was young ~*
******
Senior Member
1,710 posts

Joined: Apr 2006
From: Klang, Selangor D.E.
I'm using bitcomet 0.7 i feel a very strange thing in this bitcomet,
it will slow down the bandwith speed after few hour ( not sure how long time )

let say i connected 218.xx.xx.xx then i ping ip ( example www.hinet.net)
then i get average 70ms

but after download few hour i ping again will get 300ms in same ip

is it like that ?

//samurai1337 - thread merged

This post has been edited by samurai1337: Jul 19 2006, 07:01 AM
vearn27
post Jul 19 2006, 08:32 AM

Doink! Doink! Doink!
*******
Senior Member
7,284 posts

Joined: Jan 2003
From: Hong Kong / Malaysia
QUOTE(super macgyver @ Jul 18 2006, 02:27 PM)
got any chinese translation link?  sweat.gif
*
Why u need chinese translation link? huh.gif
super macgyver
post Jul 19 2006, 09:41 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(vearn27 @ Jul 19 2006, 08:32 AM)
Why u need chinese translation link? huh.gif
*
Sorry, i m poor in english. tongue.gif
sotong168
post Jul 19 2006, 09:54 AM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(Irishcoffee @ Jul 17 2006, 11:58 PM)
i get the fastest speed with 0.68
110kb with my 512k line
hahaha
*
wow, 512k line can get >100kb? mine one the most is 60kb with a lot of seeds & leechers sweat.gif , but tat is std max spd for 512k line rite?
super macgyver
post Jul 19 2006, 01:47 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(sotong168 @ Jul 19 2006, 09:54 AM)
wow, 512k line can get >100kb? mine one the most is 60kb with a lot of seeds & leechers sweat.gif , but tat is std max spd for 512k line rite?
*
i also wonder how he got tat speed. cry.gif
TStan_pang
post Jul 19 2006, 05:51 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Jul 19 2006, 01:47 PM)
i also wonder how he got tat speed.  cry.gif
*
maybe he using 1mbps package
but paid rm77......
at least my fren is like that...

can print screen that modem status and bitcomet dl speed together in one pic?
i want to see is it true...
Irishcoffee
post Jul 19 2006, 11:47 PM

ilX / Espressivo
*******
Senior Member
2,994 posts

Joined: Jan 2003
From: Behind You
i also dunnoe
but now no more liao
last time i pay 66 but can DL @ 100k
user posted image

This post has been edited by Irishcoffee: Jul 19 2006, 11:52 PM
sotong168
post Jul 20 2006, 12:01 AM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(Irishcoffee @ Jul 19 2006, 11:47 PM)
i also dunnoe
but now no more liao
last time i pay 66 but can DL @ 100k
user posted image
*
i think it should be u subscribed rm66 512kb package but they gave u 1024kb line, tat's y your spd is fast. mine is rm66, adsl shows 1024/512kbps, but the dl spd is capped to 512kbps, make number looks good-nia shakehead.gif
samurai1337
post Jul 20 2006, 07:29 AM

@_@
Group Icon
VIP
11,594 posts

Joined: Jan 2003
From: Area 51
QUOTE(Irishcoffee @ Jul 19 2006, 11:47 PM)
i also dunnoe
but now no more liao
last time i pay 66 but can DL @ 100k
user posted image
*
Should be an uncapped connection, nothing to do with Bitcomet at all.

And Please keep to the topic guys, don't go OT
vearn27
post Jul 20 2006, 08:15 AM

Doink! Doink! Doink!
*******
Senior Member
7,284 posts

Joined: Jan 2003
From: Hong Kong / Malaysia
QUOTE(sotong168 @ Jul 19 2006, 09:54 AM)
wow, 512k line can get >100kb? mine one the most is 60kb with a lot of seeds & leechers sweat.gif , but tat is std max spd for 512k line rite?
*
*streamyx download*
RM66/77 = 512 kilobits
RM88/99 = 1024 kilobits

8 bits = 1 byte

BitComet shows their speed according to byte, thus..

512 kilobits divide by 8 = 64 kilobytes
1024 kilobits divide by 8 = 128 kilobytes

kb = kilobits, kB = kilobytes

So if said 512kb line getting 100kB download is totally impossible, unless the line is miscapped or the numbers went wild tongue.gif
super macgyver
post Jul 20 2006, 12:12 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
0.70 alwiz bring me equal at 8kbps only, thinking of shifting to utorrent now. cry.gif
cheese86
post Jul 20 2006, 12:36 PM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
QUOTE(super macgyver @ Jul 20 2006, 12:12 PM)
0.70 alwiz bring me equal at 8kbps only, thinking of shifting to utorrent now. cry.gif
*
hmm...don't always come to conclusion that BC give you low speed.

have you check your router setting ? did you do your port-forward properly ?

any did you off your firewall ?

BC is the so far best of all BT software,its setting is simple and easy to understand.

i manage to squeeze my BC to the maximun speed of 65K at the most..but always maintain at 55k.still okay what
super macgyver
post Jul 20 2006, 04:29 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(wengjoe @ Jul 20 2006, 12:36 PM)
hmm...don't always come to conclusion that BC give you low speed.

have you check your router setting ? did you do your port-forward properly ?

any did you off your firewall ?

BC is the so far best of all BT software,its setting is simple and easy to understand.

i manage to squeeze my BC to the maximun speed of 65K at the most..but always maintain at 55k.still okay what
*
i not using router modem ler. sweat.gif but normal 1.
cheese86
post Jul 20 2006, 04:50 PM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
you never meantion what type of modem you are using

how to help you ah ?
super macgyver
post Jul 20 2006, 05:41 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(wengjoe @ Jul 20 2006, 04:50 PM)
you never meantion what type of modem you are using

how to help you ah ?
*
linsys ethernet & usb modem.
Irishcoffee
post Jul 20 2006, 10:56 PM

ilX / Espressivo
*******
Senior Member
2,994 posts

Joined: Jan 2003
From: Behind You
try cfosspeed
great for BTing
Pennywise
post Jul 20 2006, 10:57 PM

Look at all my stars!!
*******
Senior Member
5,796 posts

Joined: Jan 2003
Today, my BitComet 0.70 fly at 100 KB/s for a whole whopping 1 hour++, then it dropped to around 90+ KB/s!

This is just the second day I'm using BitComet. Previously a Azureus user until it gave me auto-reboot-my-pc-whenever-I-start-Azureus problem. =)
TStan_pang
post Jul 21 2006, 03:16 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(wengjoe @ Jul 20 2006, 12:36 PM)
hmm...don't always come to conclusion that BC give you low speed.

have you check your router setting ? did you do your port-forward properly ?

any did you off your firewall ?

BC is the so far best of all BT software,its setting is simple and easy to understand.

i manage to squeeze my BC to the maximun speed of 65K at the most..but always maintain at 55k.still okay what
*
how about Riger DB102 modem?
i didnt found anything about this modem in port-forwarding.com
and i hv check that modem setting, no problem at all...
but the speed is only 20+kb/s
super macgyver
post Jul 22 2006, 09:44 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(GameSky @ Jul 17 2006, 07:19 PM)
yes...you just delete the *.bc extension, load the original *.torrent file in uTorrent, and set where the file is currently dled...it will do the recheck and dl it after the recheck is done..

i read some info in the other forums, some clients can be set to ban BitComet users...?
*
u mean rename or delete it?
minde
post Jul 23 2006, 08:22 PM

dreamt a king, woke up still king
*******
Senior Member
2,911 posts

Joined: Jun 2005
From: KL
erm..if im using streamyx basic 2.0Mpbs with 2mb dl / 512k upload . What settings should i put?
stsh90
post Jul 23 2006, 08:31 PM

Enthusiast
*****
Senior Member
824 posts

Joined: Apr 2006
From: KL
Well, I've no prob with BitComet 0.70.. other versions, I've no comment, becoz I only used 0.70 before.. still a newbie. But I'm okay with it.. Evertime I download stuff.. max dl speed can go until 60-70KB/sec.. depends on the seeds and peers available too. Less seeds and peers ma less speed lo.. To make my download smoother.. I always limit the upload speed whenever my task is done about 30%.. I learnt this trick from a fren of mine.. When a task completed about 30%.. Limit the upload speed to about 15KB/sec.. then the upload speed will remain there, and dl speed will remain at its highest speed..

correct me if I'm wrong. still a newbie afterall ^^

Cheers.
TStan_pang
post Jul 23 2006, 09:17 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(minde @ Jul 23 2006, 08:22 PM)
erm..if im using streamyx basic 2.0Mpbs with 2mb dl / 512k upload . What settings should i put?
*
the setting is more depend in upload speed...
although we are willing to downloading file
but in setting, it more depend in upload

set ur upload speed to 80% of ur upload speed
else you will be "chocking"
so, you can set ur max upload speed to 50kbps...
other, it depend ur bitcomet version
juz dun forget to set Advanced > Connection > Protocol Encryption (Avoid ISP block BT protocol)
in this option, set to "Always"
then it will be ok...
QUOTE(stsh90 @ Jul 23 2006, 08:31 PM)
Well, I've no prob with BitComet 0.70.. other versions, I've no comment, becoz I only used 0.70 before.. still a newbie. But I'm okay with it.. Evertime I download stuff.. max dl speed can go until 60-70KB/sec.. depends on the seeds and peers available too. Less seeds and peers ma less speed lo.. To make my download smoother.. I always limit the upload speed whenever my task is done about 30%.. I learnt this trick from a fren of mine.. When a task completed about 30%.. Limit the upload speed to about 15KB/sec.. then the upload speed will remain there, and dl speed will remain at its highest speed..

correct me if I'm wrong. still a newbie afterall ^^

Cheers.
*
i think you can always limit ur upload speed to 80% of ur max upload speed
but not when completed 30% and set to 15kb/s
i set my max upload to 22kb/s
it remain to 22kb/s in everytime!!
why need to complete till 30% first?
and 15kb/s is too low la
it will make other ppl dl slow...

if you set ur upload speed higher, then ur dl speed also will be higher!
super macgyver
post Jul 24 2006, 10:24 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Jul 23 2006, 09:17 PM)
the setting is more depend in upload speed...
although we are willing to downloading file
but in setting, it more depend in upload

set ur upload speed to 80% of ur upload speed
else you will be "chocking"
so, you can set ur max upload speed to 50kbps...
other, it depend ur bitcomet version
juz dun forget to set Advanced > Connection > Protocol Encryption (Avoid ISP block BT protocol)
in this option, set to "Always"
then it will be ok...

i think you can always limit ur upload speed to 80% of ur max upload speed
but not when completed 30% and set to 15kb/s
i set my max upload to 22kb/s
it remain to 22kb/s in everytime!!
why need to complete till 30% first?
and 15kb/s is too low la
it will make other ppl dl slow...

if you set ur upload speed higher, then ur dl speed also will be higher!
*
wat speed should i put if my dl speed is alwiz below 10kbps? sad.gif
Darkmage12
post Jul 24 2006, 01:19 PM

shhhhhhhhh come i tell you something hehe
********
All Stars
17,053 posts

Joined: Jan 2003
i dun set anything still get above 60KB/s tongue.gif
always use the latest
TStan_pang
post Jul 24 2006, 01:33 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Jul 24 2006, 10:24 AM)
wat speed should i put if my dl speed is alwiz below 10kbps?  sad.gif
*
cant help if you aledi set ur max upload speed, make portforward
and make bitcomet go through firewall...
QUOTE(Darkmage12 @ Jul 24 2006, 01:19 PM)
i dun set anything still get above 60KB/s tongue.gif
always use the latest
*
that mean you are very lucky
coz can get stable connection from TMnuts
not like us......

This post has been edited by tan_pang: Jul 24 2006, 01:36 PM
super macgyver
post Jul 24 2006, 02:33 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(Darkmage12 @ Jul 24 2006, 01:19 PM)
i dun set anything still get above 60KB/s tongue.gif
always use the latest
*
where is ur location? drool.gif
Darkmage12
post Jul 24 2006, 02:38 PM

shhhhhhhhh come i tell you something hehe
********
All Stars
17,053 posts

Joined: Jan 2003
Penang brows.gif
got once the bitcomet really teruk but now cant complain la cos it rocks
abe_mad
post Jul 24 2006, 02:39 PM

Getting Started
**
Junior Member
150 posts

Joined: Feb 2006
From: Big Cookie Co.
QUOTE(super macgyver @ Jul 24 2006, 02:33 PM)
where is ur location? drool.gif
*
doesn't the download speed depend on the seed? more seed are willing to share, more download speed. I found out that latest tv series which have seed of 50 above tend to give me about 30-50kbs. Plus other slow2 downloads, usually around 60-70 also.
Ya Rerd
post Jul 24 2006, 02:45 PM

Banzai!
*****
Senior Member
772 posts

Joined: Jan 2003
From: Bkt Jalil
I'm using v0.59 and it got better this past month...before that was very bad. Can't even go past 5kb/s...

Now, can easily reach 90kb/s. I think it's partly bcoz of the Big NUT screw-ups and partially ur seed quality.
TStan_pang
post Jul 24 2006, 05:24 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(abe_mad @ Jul 24 2006, 02:39 PM)
doesn't the download speed depend on the seed? more seed are willing to share, more download speed. I found out that latest tv series which have seed of 50 above tend to give me about 30-50kbs. Plus other slow2 downloads, usually around 60-70 also.
*
watch this la
Attached Image
HMMaster
post Jul 24 2006, 05:51 PM

10K Club
Group Icon
Moderator
10,308 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(tan_pang @ Jul 24 2006, 05:24 PM)
watch this la
Attached Image
*
im quite sure that you are behind firewall. thats why your speed is slow smile.gif
TStan_pang
post Jul 24 2006, 09:27 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(HMMaster @ Jul 24 2006, 05:51 PM)
im quite sure that you are behind firewall. thats why your speed is slow smile.gif
*
this is my modem setting about firewall
i dont think it is behind firewall......

but that low dl speed is juz a few second
after that, i got 20+kb/s dl speed... laugh.gif


Attached thumbnail(s)
Attached Image
adri4n
post Jul 24 2006, 09:32 PM

Running in Circles... Going No Where
******
Senior Member
1,850 posts

Joined: Jan 2003
erm.. funny though eh.. im on bitcomet 0.56 .. i had to set my upload limit to 15kb to achieve optimum download speed.. the download speed varies frm 40++kb to 60kb ... btw im on rm 66 smtyx package
driftmeister
post Jul 24 2006, 10:04 PM

Penggadai Rakyat®
*******
Senior Member
4,133 posts

Joined: Jan 2003
From: Cameron Highlands Rank: Amateur
QUOTE(adri4n @ Jul 24 2006, 09:32 PM)
erm.. funny though eh.. im on bitcomet 0.56 .. i had to set my upload limit to 15kb to achieve optimum download speed.. the download speed varies frm 40++kb to 60kb ... btw im on rm 66 smtyx package
*
same here
can never get the best speed with 20kbps upload
wanna be kind also kenot tongue.gif
TStan_pang
post Jul 24 2006, 11:23 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(driftmeister @ Jul 24 2006, 10:04 PM)
same here
can never get the best speed with 20kbps upload
wanna be kind also kenot  tongue.gif
*
the p2p forum said that upload limit should put to 80% of ur max upload speed...
so, i put 25kb/s at first (256k upload x 80% = 25.6kb/s)
the dl speed... shakehead.gif
so, i try reduce it 1 by 1 and check for the best dl speed

then, 22kb/s is best in my pc
maybe different area have the different dl speed to us...
my fren didnt set his max upload speed (no limit)
but can have 60+kb/s dl speed!!

confuse now... rclxub.gif rclxub.gif rclxub.gif
Darkmage12
post Jul 25 2006, 12:02 AM

shhhhhhhhh come i tell you something hehe
********
All Stars
17,053 posts

Joined: Jan 2003
QUOTE(tan_pang @ Jul 24 2006, 05:24 PM)
watch this la
Attached Image
*
that is peer la... peer too many also not good cos quite a number of leechers tongue.gif
alvintan84
post Jul 27 2006, 12:01 AM

Game Enthusiast & Food Hunter
****
Senior Member
549 posts

Joined: Jul 2006
From: KL, Malaysia
If u wan the latest update, get the latest version. Unless u prefer stick with old ver with lots of bugs& errors smile.gif
HMMaster
post Jul 27 2006, 12:12 AM

10K Club
Group Icon
Moderator
10,308 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(tan_pang @ Jul 24 2006, 09:27 PM)
this is my modem setting about firewall
i dont think it is behind firewall......

but that low dl speed is juz a few second
after that, i got 20+kb/s dl speed... laugh.gif
*
no 'remote' in the peer list means your connection is blocked or something. make sure that your port is open. and disabling the firewall in your modem doesnt mean your port is open. ;-)
sotong168
post Jul 27 2006, 08:02 AM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
i always heard ppl said version xx or yy can have a faster or sluggish spd, but sincerely i never experience it -ler... stability thingy is true btw
samurai1337
post Jul 27 2006, 08:08 AM

@_@
Group Icon
VIP
11,594 posts

Joined: Jan 2003
From: Area 51
QUOTE(sotong168 @ Jul 27 2006, 08:02 AM)
i always heard ppl said version xx or yy can have a faster or sluggish spd, but sincerely i never experience it -ler...  stability thingy is true btw
*
Same here...
Never had experience like "oh version 0.64 is faster! version 0.65 is slower! version 0.70 is fastest!"

Once I've got the settings done correctly, the speed is always the stadard speed for my Streamyx package (in other words, 50-60KBps for RM66/mth line). It's not that I'll get 100KBps for a specific version of bitcomet.

Probably they said like that because so happen they use the particular version for slow torrents and the other version for faster torrents.

This post has been edited by samurai1337: Jul 27 2006, 08:08 AM
HMMaster
post Jul 27 2006, 09:46 AM

10K Club
Group Icon
Moderator
10,308 posts

Joined: Jan 2003
From: Kuala Lumpur
totally agree on that. i dont believe that newer/certain version is faster, unless the developer change the way the client download from other peers in that particular ver to make it dl faster. but i havent see any changes on bitcomet in the recent ver that can 'improve' speed.
TStan_pang
post Jul 28 2006, 10:41 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(HMMaster @ Jul 27 2006, 12:12 AM)
no 'remote' in the peer list means your connection is blocked or something. make sure that your port is open. and disabling the firewall in your modem doesnt mean your port is open. ;-)
*
else, need to config wat to make me hv "remote" in peer list??
sotong168
post Jul 29 2006, 08:13 PM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(tan_pang @ Jul 28 2006, 10:41 PM)
else, need to config wat to make me hv "remote" in peer list??
*
if u r using router u need to fwd your port
http://www.portforward.com

edit: opps, this was mentioned b4 huh... my bad

This post has been edited by sotong168: Jul 29 2006, 08:16 PM
super macgyver
post Jul 30 2006, 02:19 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Jul 28 2006, 10:41 PM)
else, need to config wat to make me hv "remote" in peer list??
*
wat modem u using ? my artnet, linsys, dlink also cant c remote ler.
TStan_pang
post Jul 30 2006, 06:17 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Jul 30 2006, 02:19 PM)
wat modem u using ? my artnet, linsys, dlink also cant c remote ler.
*
i using Riger DB102
this modem rare to found
juz got a few result in google...
smoochiesayn
post Jul 30 2006, 11:52 PM

Enthusiast
*****
Senior Member
787 posts

Joined: Oct 2005
anyone encounter this pop up with bitcomet 0.70?

so annoying and i dont know what issit for... rclxub.gif

user posted image
it jz keep on popping out..

This post has been edited by smoochiesayn: Jul 30 2006, 11:52 PM
super macgyver
post Jul 31 2006, 01:26 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(smoochiesayn @ Jul 30 2006, 11:52 PM)
anyone encounter this pop up with bitcomet 0.70?

so annoying and i dont know what issit for... rclxub.gif

user posted image
it jz keep on popping out..
*
did u try to use proxy server in ur bt setting?
smoochiesayn
post Jul 31 2006, 03:05 PM

Enthusiast
*****
Senior Member
787 posts

Joined: Oct 2005
QUOTE(super macgyver @ Jul 31 2006, 01:26 PM)
did u try to use proxy server in ur bt setting?
*
er.. no.

so, wat shud i do now? unsure.gif
super macgyver
post Jul 31 2006, 03:31 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(smoochiesayn @ Jul 31 2006, 03:05 PM)
er.. no.

so, wat shud i do now? unsure.gif
*
i m using 0.70 now wo prob, speed stable at 50kbps too.
smoochiesayn
post Jul 31 2006, 03:34 PM

Enthusiast
*****
Senior Member
787 posts

Joined: Oct 2005
QUOTE(super macgyver @ Jul 31 2006, 03:31 PM)
i m using 0.70 now wo prob, speed stable at 50kbps too.
*
i jz upgrade my bitcomet to 0.70 recently.
and it keeps on popping out that server busy thingy. rclxub.gif
ayu
post Jul 31 2006, 03:37 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



QUOTE(smoochiesayn @ Jul 31 2006, 03:34 PM)
i jz upgrade my bitcomet to 0.70 recently.
and it keeps on popping out that server busy thingy.  rclxub.gif
*
BITCOMET and BITTORRENT is same issit?
super macgyver
post Jul 31 2006, 07:12 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(smoochiesayn @ Jul 31 2006, 03:34 PM)
i jz upgrade my bitcomet to 0.70 recently.
and it keeps on popping out that server busy thingy.  rclxub.gif
*
u using any firewall?
TStan_pang
post Jul 31 2006, 07:13 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(smoochiesayn @ Jul 31 2006, 03:34 PM)
i jz upgrade my bitcomet to 0.70 recently.
and it keeps on popping out that server busy thingy.  rclxub.gif
*
or maybe that modem setting not "bridge"...
ayu
post Jul 31 2006, 07:14 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



Where to download the lastert bitcomet?
TStan_pang
post Jul 31 2006, 07:24 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(ayu @ Jul 31 2006, 07:14 PM)
Where to download the lastert bitcomet?
*
http://www.bitcomet.com/

or

http://www.bitcomet.com/doc/download-achive.htm
ayu
post Jul 31 2006, 07:27 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



QUOTE(tan_pang @ Jul 31 2006, 07:24 PM)
http://www.bitcomet.com/

or

http://www.bitcomet.com/doc/download-achive.htm
*
I try manys time edi.. when i click save as to my files.. it cannot move~~~?? what problem? rclxub.gif
cheese86
post Jul 31 2006, 07:40 PM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
i feel that my torrent take very long to start the download (started since this week itself)

and aslo my initiation all show remote only...is this okie ?

btw..i'm using BitComet 0.63

This post has been edited by wengjoe: Jul 31 2006, 07:41 PM
ayu
post Jul 31 2006, 07:41 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



QUOTE(wengjoe @ Jul 31 2006, 07:40 PM)
i feel that my torrent take very long to start the download

and aslo my initiation all show remote only...is this okie ?

btw..i'm using BitComet 0.63
*
Lol..i also have this problem..dunno how to fix it.. ask manys people edi.All ask me set the settings..but i dunno how to set.. blush.gif
smoochiesayn
post Jul 31 2006, 09:04 PM

Enthusiast
*****
Senior Member
787 posts

Joined: Oct 2005
QUOTE(super macgyver @ Jul 31 2006, 07:12 PM)
u using any firewall?
*
no. no firewall.

QUOTE(tan_pang @ Jul 31 2006, 07:13 PM)
or maybe that modem setting not "bridge"...
*
tis one i no idea rclxub.gif

anyway, the pop up din pop up again after i change the proxy type sweat.gif

This post has been edited by smoochiesayn: Jul 31 2006, 09:04 PM
super macgyver
post Jul 31 2006, 11:10 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(wengjoe @ Jul 31 2006, 07:40 PM)
i feel that my torrent take very long to start the download (started since this week itself)

and aslo my initiation all show remote only...is this okie ?

btw..i'm using BitComet 0.63
*
try update to 0.70 lah, my bt is very stable at 55kbps.


Attached thumbnail(s)
Attached Image
ayu
post Jul 31 2006, 11:10 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



QUOTE(smoochiesayn @ Jul 31 2006, 09:04 PM)
no. no firewall.
tis one i no idea  rclxub.gif

anyway, the pop up din pop up again after i change the proxy type sweat.gif
*
DAMN IT, dunno why my bitcomet and bittorrent got what hell problem.. 2 also can't move..some time can move..sometime can't move.
ss_izal
post Aug 1 2006, 01:25 AM

On my way
****
Senior Member
591 posts

Joined: Jan 2003
how i want to increase my upload ,now it only 0-1kbps even when set to high priority. pity others,i myself download for about 15hours of smallville.
it normally takes about 5hours.
samurai1337
post Aug 1 2006, 07:45 AM

@_@
Group Icon
VIP
11,594 posts

Joined: Jan 2003
From: Area 51
QUOTE(ss_izal @ Aug 1 2006, 01:25 AM)
how i want to increase my upload ,now it only 0-1kbps even when set to high priority. pity others,i myself download for about 15hours of smallville.
it normally takes about 5hours.
*
For some of the seeds, the seeders outnumber peers, so that might be the reason that you DON'T NEED to upload that much.

Otherwise, it could be the problem of your ISP - unable to provide satisfactory upstream
super macgyver
post Aug 1 2006, 01:07 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(ss_izal @ Aug 1 2006, 01:25 AM)
how i want to increase my upload ,now it only 0-1kbps even when set to high priority. pity others,i myself download for about 15hours of smallville.
it normally takes about 5hours.
*
how large is ur file? blink.gif
TStan_pang
post Aug 1 2006, 03:13 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(ayu @ Jul 31 2006, 07:27 PM)
I try manys time edi.. when i click save as to my files.. it cannot move~~~?? what problem? rclxub.gif
*
btw, if you dl it from the download.com
it will very slow.........
sometime also cannot move

you aledi try dl other version?
they also slow like this??
QUOTE(super macgyver @ Jul 31 2006, 11:10 PM)
try update to 0.70 lah, my bt is very stable at 55kbps.
*
i also try v0.70 before, but the dl speed is juz around 15kbps...
then i downgrade it back to v0.63, and it can get to 25kbps back...
and i hv to mention that both are same file...

i suggest wengjoe try any other version and make the best setting to them, and find the best speed in wat version...
and you said ur peer juz show "remote"?? blink.gif
i thought it is "local"
ss_izal
post Aug 1 2006, 03:33 PM

On my way
****
Senior Member
591 posts

Joined: Jan 2003
QUOTE(super macgyver @ Aug 1 2006, 01:07 PM)
how large is ur file?  blink.gif
*
the file is just 300mb+, but lack of seeders and peers ( 1/10 )
cheese86
post Aug 1 2006, 04:55 PM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
QUOTE(tan_pang @ Aug 1 2006, 03:13 PM)
i suggest wengjoe try any other version and make the best setting to them, and find the best speed in wat version...
and you said ur peer juz show "remote"?? blink.gif
i thought it is "local"
*
problem solve

i notice the problem happen after i install a software called "logmein",some remote access software that let you access your pc from other place.

after i uninstall and restart my comp and connection...everything is back to normal..torrent running at full speed again rclxms.gif

when i use the latest comet which is 0.70..i got this error message at my log "Windows XP WF Status: Not Supported".

someone mind explain what the mean ?

This post has been edited by wengjoe: Aug 1 2006, 04:57 PM
ss_izal
post Aug 1 2006, 09:03 PM

On my way
****
Senior Member
591 posts

Joined: Jan 2003
is this normal? my connection is 512/256. both got equal seeders and leechers


Attached thumbnail(s)
Attached Image
ayu
post Aug 1 2006, 09:06 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



Ya.. i download the bitcomet from www.download.com ...it cannot move also.
sotong168
post Aug 1 2006, 09:17 PM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(ss_izal @ Aug 1 2006, 09:03 PM)
is this normal? my connection is 512/256. both got equal seeders and leechers
*
yr total dl is 53KB/s which is consider very good rate oledi, 512 fastest rate is 60kb/s theoritically
ayu
post Aug 1 2006, 09:29 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



How do i know which is better connection?
sotong168
post Aug 1 2006, 11:22 PM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(ayu @ Aug 1 2006, 09:29 PM)
How do i know which is better connection?
*
refer back to post#97
http://forum.lowyat.net/index.php?showtopi...dpost&p=7923242
ayu
post Aug 1 2006, 11:46 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



QUOTE(sotong168 @ Aug 1 2006, 11:22 PM)
refer back to post#97
http://forum.lowyat.net/index.php?showtopi...dpost&p=7923242
*
Thanks~~~
TStan_pang
post Aug 4 2006, 09:07 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(ss_izal @ Aug 1 2006, 09:03 PM)
is this normal? my connection is 512/256. both got equal seeders and leechers
*
i think it didnt abnormal
and ur connection is juz 512kbps
if can, try don't open 2 task together
else, it can easily be like this...

now, i hv another problem
Attached Image
is it normal???
last time i wondering wengjoe talk about
but this time really happened to me...

This post has been edited by tan_pang: Aug 4 2006, 09:25 PM
cheese86
post Aug 5 2006, 10:02 AM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
QUOTE(tan_pang @ Aug 4 2006, 09:07 PM)
i think it didnt abnormal
and ur connection is juz 512kbps
if can, try don't open 2 task together
else, it can easily be like this...

now, i hv another problem
Attached Image
is it normal???
last time i wondering wengjoe talk about
but this time really happened to me...
*
yeah..i have the same problem like yours

only few local appear..the rest is all remote...but now problem solve liao

you should be getting at least 6 - 7 local and the rest is all remote for a normal torrent file
saintsoul
post Aug 5 2006, 06:59 PM

sbobet
******
Senior Member
1,387 posts

Joined: May 2006
From: www
I using bitcomet 6.0
It outdate but what to do.my computer too old.
If i use the latest version will it cause my computer to lag?
super macgyver
post Aug 5 2006, 07:05 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(saintsoul @ Aug 5 2006, 06:59 PM)
I using bitcomet 6.0
It outdate but what to do.my computer too old.
If i use the latest version will it cause my computer to lag?
*
dun worry, it wont. as u c i m using 0.70 now.

-screenshot censored - nobody is interested in what you download.

This post has been edited by samurai1337: Aug 5 2006, 09:03 PM
TStan_pang
post Aug 5 2006, 07:20 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Aug 5 2006, 07:05 PM)
dun worry, it wont. as u c i m using 0.70 now.
*
wah
ur speed is very good
you register 1m package?
if 512k, why ur upload speed can reach >32kb??
saintsoul
post Aug 5 2006, 10:41 PM

sbobet
******
Senior Member
1,387 posts

Joined: May 2006
From: www
QUOTE(super macgyver @ Aug 5 2006, 07:05 PM)
dun worry, it wont. as u c i m using 0.70 now.
*
0.70 wont use up more memory?My p2 can support anot? sweat.gif
ayu
post Aug 5 2006, 10:49 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



QUOTE(saintsoul @ Aug 5 2006, 10:41 PM)
0.70 wont use up more memory?My p2 can support anot? sweat.gif
*
Im using the 0.70 bitcomet now also. thumbup.gif
super macgyver
post Aug 5 2006, 11:44 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(saintsoul @ Aug 5 2006, 10:41 PM)
0.70 wont use up more memory?My p2 can support anot? sweat.gif
*
can, but just dun dl too many in the same time. sweat.gif
saintsoul
post Aug 5 2006, 11:45 PM

sbobet
******
Senior Member
1,387 posts

Joined: May 2006
From: www
QUOTE(ayu @ Aug 5 2006, 10:49 PM)
Im using the 0.70 bitcomet now also.  thumbup.gif
*
I using Pentium2 333mhz,192MB ram.old computer. sweat.gif
after upgrade computer wont lag meh?
blackamikaze
post Aug 5 2006, 11:56 PM

Trooper Rank: BIG HEAD SERGEANT
*******
Senior Member
2,671 posts

Joined: Jul 2005
From: Bestine, the capital of Tatooine
QUOTE(soulfly @ Aug 5 2006, 11:46 PM)
the most obvious thing about his fakeness was he kept saying that he's orang kampung and hidup susah.... but in reality his dad drives a big 4x4, he himself drive atleast an iswara

***** that fake human
*
i still using 0.59 version haha... serve me very well.. tip top speed...
saintsoul
post Aug 6 2006, 02:45 AM

sbobet
******
Senior Member
1,387 posts

Joined: May 2006
From: www
Better dun upgrade if still serve me well.
ahaha
ibu1980
post Aug 6 2006, 03:07 AM

Senior Citizen
****
Senior Member
598 posts

Joined: Mar 2006
From: 202.1.192.196
i am using 0.62 stable one running on XP SP 2

Can get download speed of over 100KB/s drool.gif drool.gif


saintsoul
post Aug 6 2006, 03:25 AM

sbobet
******
Senior Member
1,387 posts

Joined: May 2006
From: www
QUOTE(ibu1980 @ Aug 6 2006, 03:07 AM)
i am using 0.62 stable one running on XP SP 2

Can get download speed of over 100KB/s  drool.gif  drool.gif
*
ohmy.gif that too great.
streamyx 1mbs?
Bitcomet default setting?
super macgyver
post Aug 6 2006, 12:51 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(saintsoul @ Aug 6 2006, 03:25 AM)
ohmy.gif that too great.
streamyx 1mbs?
Bitcomet default setting?
*
he is using 1mbs lah
saintsoul
post Aug 6 2006, 04:37 PM

sbobet
******
Senior Member
1,387 posts

Joined: May 2006
From: www
QUOTE(super macgyver @ Aug 6 2006, 12:51 PM)
he is using 1mbs lah
*
What about the setting?
jiant
post Aug 6 2006, 05:13 PM

Regular
******
Senior Member
1,785 posts

Joined: Jan 2003
what the setting u all use?my one no more than 40K. i use 512KB Package with Aztech 600EU BitComet 0.70...any body can help me to optimal setting?

This post has been edited by jiant: Aug 6 2006, 05:15 PM
saintsoul
post Aug 6 2006, 05:53 PM

sbobet
******
Senior Member
1,387 posts

Joined: May 2006
From: www
QUOTE(jiant @ Aug 6 2006, 05:13 PM)
what the setting u all use?my one no more than 40K. i use 512KB Package with Aztech 600EU BitComet 0.70...any body can help me to optimal setting?
*
I also using Aztech 600EU,BT 0.60,streamyx 512KB.Now i using his setting.It depend on what torrent u download.

I copy this thing from somewhere.

this mine setting la...not know wether work with u guys..

go to preferences >> advanced >> connection >>
1. set maximum connection to :999999
2. connection to keep per task :999999
3. max half-open TCP connection :999999

then, go to preferences >> advanced >> ip rules >>
1. max session per IP for downloading task :999999
ayu
post Aug 6 2006, 06:18 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



QUOTE(ibu1980 @ Aug 6 2006, 03:07 AM)
i am using 0.62 stable one running on XP SP 2

Can get download speed of over 100KB/s  drool.gif  drool.gif
*
Really?? can print screen to show? do you adjuat any settings?
ibu1980
post Aug 6 2006, 06:34 PM

Senior Citizen
****
Senior Member
598 posts

Joined: Mar 2006
From: 202.1.192.196
QUOTE(saintsoul @ Aug 6 2006, 05:53 PM)
I also using Aztech 600EU,BT 0.60,streamyx 512KB.Now i using his setting.It depend on what torrent u download.

I copy this thing from somewhere.

this mine setting la...not know wether work with u guys..

go to preferences >> advanced >> connection >>
1. set maximum connection to :999999
2. connection to keep per task :999999
3. max half-open TCP connection :999999

then, go to preferences >> advanced >> ip rules >>
1. max session per IP for downloading task :999999
*
of coz lah... u think i joke meh.. i will post some screen shots when i download next time.. rclxms.gif rclxms.gif

not using default settings lor.. port fwded + custom settings lor

yeah..streamyx 1MB line.. i can utilze my full bandwidth in bitcomet..

not free at the moment to explain settings in detail.. but nth much in specific to explain lor..

A sample screenshot for settings..

Attached Image

Max peers to display: 150 only

Using Linksys Router thumbup.gif




ayu
post Aug 6 2006, 06:39 PM

~Great Seller~Excellent service~
******
Senior Member
1,298 posts

Joined: Jul 2006
From: KLANG TELOK PULAI



QUOTE(ibu1980 @ Aug 6 2006, 06:34 PM)
of coz lah... u think i joke meh.. i will post some screen shots when i download next time..  rclxms.gif  rclxms.gif

not using default settings lor.. port fwded + custom settings lor

yeah..streamyx 1MB line.. i can utilze my full bandwidth in bitcomet..

not free at the moment to explain settings in detail.. but nth much in specific to explain lor..

A sample screenshot for settings..

Attached Image

Max peers to display: 150 only

Using Linksys Router  thumbup.gif
*
i was set it as like you say just now..but did't see any diffrent also..maybe im using USB ADSL modem?
ibu1980
post Aug 6 2006, 08:43 PM

Senior Citizen
****
Senior Member
598 posts

Joined: Mar 2006
From: 202.1.192.196
USB eh? hmmm.. but not necessary everytime u shud get high speed..depends on the seeds + trackers and peers as well.. if ur speed is very low..then some problems lor.. for XP SP 2, u need to apply a patch to fix the simultaneous tcp ip connections...
TStan_pang
post Aug 7 2006, 06:18 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(saintsoul @ Aug 6 2006, 05:53 PM)
I also using Aztech 600EU,BT 0.60,streamyx 512KB.Now i using his setting.It depend on what torrent u download.

I copy this thing from somewhere.

this mine setting la...not know wether work with u guys..

go to preferences >> advanced >> connection >>
1. set maximum connection to :999999
2. connection to keep per task :999999
3. max half-open TCP connection :999999

then, go to preferences >> advanced >> ip rules >>
1. max session per IP for downloading task :999999
*
stupid settings
who teach you set to these can get higher speed?? vmad.gif
» Click to show Spoiler - click again to hide... «
saintsoul
post Aug 7 2006, 06:25 PM

sbobet
******
Senior Member
1,387 posts

Joined: May 2006
From: www
QUOTE(tan_pang @ Aug 7 2006, 06:18 PM)
stupid settings
who teach you set to these can get higher speed?? vmad.gif
» Click to show Spoiler - click again to hide... «

*
Forget already get from who.someone from LYN sweat.gif

This post has been edited by saintsoul: Aug 7 2006, 06:25 PM
samurai1337
post Aug 8 2006, 07:41 AM

@_@
Group Icon
VIP
11,594 posts

Joined: Jan 2003
From: Area 51
Setting maximum connections to 999999999999999999999999999999999 doesn't mean your speed can go 50000000KBps sweat.gif It will just make your router unecessarily overloaded with connections

The person who instructed you to do that was either fooling you or just plain stupid (no offence)

This post has been edited by samurai1337: Aug 8 2006, 07:42 AM
ibu1980
post Aug 8 2006, 04:05 PM

Senior Citizen
****
Senior Member
598 posts

Joined: Mar 2006
From: 202.1.192.196
QUOTE(samurai1337 @ Aug 8 2006, 07:41 AM)
Setting maximum connections to 999999999999999999999999999999999 doesn't mean your speed can go 50000000KBps sweat.gif It will just make your router unecessarily overloaded with connections

The person who instructed you to do that was either fooling you or just plain stupid (no offence)
*
hehe.. yeah.. no need to set like 9999 .. i set like 150 only u know biggrin.gif still can get very high speed icon_rolleyes.gif
GameSky
post Aug 8 2006, 04:20 PM

Nyancat too much
*******
Senior Member
6,381 posts

Joined: Jun 2005
From: meow meow
another note:

setting connections to 9999999999999999999...

will use lots of memory

This post has been edited by GameSky: Aug 8 2006, 04:21 PM
daddypin
post Aug 8 2006, 04:25 PM

Getting Started
**
Junior Member
60 posts

Joined: May 2006
port forward lah..i could get around 80-100 kbps but it depends on the seeders..
TStan_pang
post Aug 8 2006, 05:40 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(ibu1980 @ Aug 8 2006, 04:05 PM)
hehe.. yeah.. no need to set like 9999 .. i set like 150 only u know biggrin.gif  still can get very high speed  icon_rolleyes.gif
*
if 1mbps, you can set to 100-150
512k usually set to 50-100

this is the setting that i think can work better......
shockw@ve
post Aug 8 2006, 06:17 PM

d[-_-]b
Group Icon
VIP
1,889 posts

Joined: Jan 2003
QUOTE(GameSky @ Aug 8 2006, 06:20 PM)
another note:

setting connections to 9999999999999999999...

will use lots of memory
*
I highly doubt that would happen as the connection limit of your modem would be a constraining factor. It's more likely that you would be getting connection timeouts instead.
cubchai
post Aug 9 2006, 04:17 AM

Casual
***
Junior Member
322 posts

Joined: Oct 2004
Personally I like Bitcomet 0.54
Anybody likes this version? But I think most people will update everytime when there is an updated version.
shockw@ve
post Aug 9 2006, 09:04 AM

d[-_-]b
Group Icon
VIP
1,889 posts

Joined: Jan 2003
Streamyx related issues can go here: http://forum.lowyat.net/index.php?showforum=126

This thread is only for Bitcomet issues.

-thread cleaned-
SUSRaikkonen
post Aug 9 2006, 09:22 AM

I'll be your ♡ ☠☼ ☂
*******
Senior Member
8,635 posts

Joined: Jun 2006
From: Jeonju/Jeollabuk-do
QUOTE(unknown @ Jul 17 2006, 03:05 PM)
Router mode? got do port-forwarding or not?
http://www.portforward.com/
*
Stuck at the last step...BitCom1.
Cannot find it in the Port Fowarding Menu.
samurai1337
post Aug 9 2006, 09:25 AM

@_@
Group Icon
VIP
11,594 posts

Joined: Jan 2003
From: Area 51
QUOTE(Raikkonen @ Aug 9 2006, 09:22 AM)
Stuck at the last step...BitCom1.
Cannot find it in the Port Fowarding Menu.
*
That one you need to add by yourself
SUSRaikkonen
post Aug 9 2006, 09:31 AM

I'll be your ♡ ☠☼ ☂
*******
Senior Member
8,635 posts

Joined: Jun 2006
From: Jeonju/Jeollabuk-do
QUOTE(samurai1337 @ Aug 9 2006, 09:25 AM)
That one you need to add by yourself
*
Go to User, then New?

Rule Name: BitCom1
Port Start:13450
Port End:13450
Port Map:13450
samurai1337
post Aug 9 2006, 09:32 AM

@_@
Group Icon
VIP
11,594 posts

Joined: Jan 2003
From: Area 51
QUOTE(Raikkonen @ Aug 9 2006, 09:31 AM)
Go to User, then New?

Rule Name: BitCom1
Port Start:13450
Port End:13450
Port Map:13450
*
Yeah, right
I assume you're using aztech router right?

Remember you map it to your own local IP not any other IP
GameSky
post Aug 9 2006, 09:36 AM

Nyancat too much
*******
Senior Member
6,381 posts

Joined: Jun 2005
From: meow meow
Althought it's Azureus faq..so:

http://www.azureuswiki.com/index.php/Reduce_memory_usage
SUSRaikkonen
post Aug 9 2006, 09:38 AM

I'll be your ♡ ☠☼ ☂
*******
Senior Member
8,635 posts

Joined: Jun 2006
From: Jeonju/Jeollabuk-do
QUOTE(samurai1337 @ Aug 9 2006, 09:32 AM)
Yeah, right
I assume you're using aztech router right?

Remember you map it to your own local IP not any other IP
*
Yes...my own IP.
Using router.
Can keep changin IP in http://192.168.1.1.

Sometimes 218.xx.xx.xxx .some times 219.xx.xx.xxx

The 13450 is the listen port of BitComet right?
Keep changing if we "Choose Random Port".

Download still slow though even I change Port to 24367 cry.gif
Never reach above 20kb...maintain 14kb...and now 6kb...worse.
samurai1337
post Aug 9 2006, 09:42 AM

@_@
Group Icon
VIP
11,594 posts

Joined: Jan 2003
From: Area 51
QUOTE(Raikkonen @ Aug 9 2006, 09:38 AM)
Yes...my own IP.
Using router.
Can keep changin IP in http://192.168.1.1.

Sometimes 218.xx.xx.xxx .some times 219.xx.xx.xxx

The 13450 is the listen port of BitComet right?
Keep changing if we "Choose Random Port".

Download still slow though even I change Port to 24367  cry.gif
Never reach above 20kb...maintain 14kb...and now 6kb...worse.
*
No, I think that is your WAN IP

Look for your internal IP using ipconfig command.
Sometimes the internal IP changes everytime you reset the router, it's a good idea to set static IP
super macgyver
post Aug 9 2006, 10:12 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
i dun thik port forwarding will do really any good while tmnet so slow, just use the wan ip 218 for 512kbps line can easilly get 60kbps like i did.
if u use 1mbps can get around 90kbps but i o money to apply 1mbps.
SUSRaikkonen
post Aug 10 2006, 12:19 AM

I'll be your ♡ ☠☼ ☂
*******
Senior Member
8,635 posts

Joined: Jun 2006
From: Jeonju/Jeollabuk-do
disaster.
since I follow the port forwarding thing...cannot connect to internet now.
Even when going to the http://192.168.1.1
After entering the username and password to login..

"internal communation error. exiting."

What to do now? doh.gif

Called Streamyx tech. support...they ask me to bring the modem to a
PC shop so that they can set it to manual connection doh.gif
Pangkey
post Aug 10 2006, 02:45 AM

Getting Started
**
Junior Member
292 posts

Joined: Feb 2005
From: kl
my bitcomet 0.65 always crash every 10 mins or so, damn frustrating when i leave it overnight. cant dl anything, crash crash crash...grrrr vmad.gif
Dexter
post Aug 10 2006, 02:59 AM

Regular
******
Senior Member
1,102 posts

Joined: Jan 2003
QUOTE(Pangkey @ Aug 10 2006, 02:45 AM)
my bitcomet 0.65 always crash every 10 mins or so, damn frustrating when i leave it overnight. cant dl anything, crash crash crash...grrrr vmad.gif
*
this is a worst version i ever installed. When I leave my PC for a night...it just close for unknown error (crash).. My experience was exactly same like yours.
You either use back the previous version or upgrade to the latest 0.70.
guardioo
post Aug 11 2006, 04:11 AM

Casual
***
Junior Member
360 posts

Joined: Jan 2003
192.168.1.1 i believe is gateway ip dude
ibu1980
post Aug 11 2006, 04:27 AM

Senior Citizen
****
Senior Member
598 posts

Joined: Mar 2006
From: 202.1.192.196
QUOTE(Raikkonen @ Aug 10 2006, 12:19 AM)
disaster.
since I follow the port forwarding thing...cannot connect to internet now.
Even when going to the http://192.168.1.1
After entering the username and password to login..

"internal communation error. exiting."

What to do now?  doh.gif

Called Streamyx tech. support...they ask me to bring the modem to a
PC shop so that they can set it to manual connection  doh.gif
*
did some wrong settings or wht? try to look for a reset button .. most routers have it i guess...reset n try again.. goodluck thumbup.gif

super macgyver
post Aug 11 2006, 06:46 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(Raikkonen @ Aug 10 2006, 12:19 AM)
disaster.
since I follow the port forwarding thing...cannot connect to internet now.
Even when going to the http://192.168.1.1
After entering the username and password to login..

"internal communation error. exiting."

What to do now?  doh.gif

Called Streamyx tech. support...they ask me to bring the modem to a
PC shop so that they can set it to manual connection  doh.gif
*
try remove the setting u moved 7 c first.
SUSRaikkonen
post Aug 11 2006, 12:35 PM

I'll be your ♡ ☠☼ ☂
*******
Senior Member
8,635 posts

Joined: Jun 2006
From: Jeonju/Jeollabuk-do
Even Reset won't made any difference.
Kong already I guess.

Bought a ne D-Link 500T.
Streamyx bandwidt test ok.
Downloading suxx...3kb doh.gif

Normally with Aztech 600eu was 40kb.
TStan_pang
post Aug 11 2006, 07:21 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Raikkonen @ Aug 11 2006, 12:35 PM)
Even Reset won't made any difference.
Kong already I guess.

Bought a ne D-Link 500T.
Streamyx bandwidt test ok.
Downloading suxx...3kb  doh.gif

Normally with Aztech 600eu was 40kb.
*
about that modem crash......
i also try reset Aztech 600 when hv error 678 after i set something
but still error 678
it juz can fixed when i call technician
then he change modem to me
everything back to normal after that...
jocelyn_h
post Aug 12 2006, 01:06 PM

New Member
*
Junior Member
7 posts

Joined: Feb 2006
are there any difference between the port-foward for Aztech 600eu n Aztech 600er??? i dunno mine is actually which model since it js label DSL 600E behind it
samurai1337
post Aug 15 2006, 06:40 AM

@_@
Group Icon
VIP
11,594 posts

Joined: Jan 2003
From: Area 51
QUOTE(jocelyn_h @ Aug 12 2006, 01:06 PM)
are there any difference between the port-foward for Aztech 600eu n Aztech 600er??? i dunno mine is actually which model since it js label DSL 600E behind it
*
You can check
http://www.portforward.com/english/routers...EU/BitComet.htm
http://www.portforward.com/english/routers...ER/BitComet.htm
to see which one is it similar to.

For me I'm using an EW but it is fine even if i refer to the guide of EU since the GUI is the same.
super macgyver
post Aug 17 2006, 07:46 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
version 0.70 been out long time, now hope can get 0.71. tongue.gif
sotong168
post Aug 17 2006, 07:49 AM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(super macgyver @ Aug 17 2006, 07:46 AM)
version 0.70 been out long time, now hope can get 0.71. tongue.gif
*
it's a good news as it means 0.70 is a stable build with less flaws

This post has been edited by sotong168: Aug 17 2006, 07:49 AM
Marvin_86
post Aug 17 2006, 09:34 AM

Getting Started
**
Junior Member
113 posts

Joined: Dec 2004
From: Kuching/Setapak,KL
Been using 0.70 too.Feel quite nice.Can reach very high speed.DOn't know is bitcomet or my internet speed suddenly become more faster.
TStan_pang
post Aug 17 2006, 02:37 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Marvin_86 @ Aug 17 2006, 09:34 AM)
Been using 0.70 too.Feel quite nice.Can reach very high speed.DOn't know is bitcomet or my internet speed suddenly become more faster.
*
then, wat is ur previous version??
Marvin_86
post Aug 17 2006, 02:52 PM

Getting Started
**
Junior Member
113 posts

Joined: Dec 2004
From: Kuching/Setapak,KL
forgot already.Not very sure.Version 6.**
mightymouse
post Aug 17 2006, 03:02 PM

Getting Started
**
Junior Member
212 posts

Joined: Aug 2005
using 0.68 n 0.70 in 2 different pcs... nothing much different
Marvin_86
post Aug 17 2006, 03:32 PM

Getting Started
**
Junior Member
113 posts

Joined: Dec 2004
From: Kuching/Setapak,KL
don't know.Maybe is my internet connection got probleum.Any know how to limit the speed of network for 4pc??Example:each pc 20kb.Because most of my friend use bitcomet but ask them set the speed limit control they don't wan to listen always make the connection dc.
skylands
post Aug 19 2006, 10:09 AM

Enthusiast
*****
Senior Member
713 posts

Joined: Mar 2005
my friend just recommad me dont use the latest ~ haha , so that i still using 0.62 :/
SUSDavid83
post Aug 19 2006, 11:45 PM

20k VIP Club
*********
All Stars
52,874 posts

Joined: Jan 2003
I'm still stay loyal with v0.63.
smokey
post Aug 20 2006, 07:18 PM

Infinity speed
*******
Senior Member
3,506 posts

Joined: Jan 2003
From: Lumpur
im still with 0.63 coz after i installed 0.70, my hdd will become bz non stop for a period...
TStan_pang
post Aug 20 2006, 08:28 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
i also use 0.63
is v0.63 is the version that most ppl use in here??
blackamikaze
post Aug 20 2006, 08:37 PM

Trooper Rank: BIG HEAD SERGEANT
*******
Senior Member
2,671 posts

Joined: Jul 2005
From: Bestine, the capital of Tatooine

im still fine with 0.59 .. oh thats old..
ibexgeo
post Aug 21 2006, 12:46 AM

Getting Started
**
Junior Member
124 posts

Joined: Sep 2005
Does bitcomet restrict full speed dl-ling connection?
I was a bit tornado user, and my dl-ling speed was like 80kB/s on average, max 110kBs. But when using Bitcomet, my speed drop to 5-15kB/s.. Why har?
TStan_pang
post Aug 21 2006, 01:41 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(ibexgeo @ Aug 21 2006, 12:46 AM)
Does bitcomet restrict full speed dl-ling connection?
I was a bit tornado user, and my dl-ling speed was like 80kB/s on average, max 110kBs. But when using Bitcomet, my speed drop to 5-15kB/s.. Why har?
*
aledi make the port forwarding or anythings else??
maybe becoz of both P2P system hv different port using in ur pc
and you didnt forward bitcomet listening port...... icon_idea.gif
maybe...
ibexgeo
post Aug 21 2006, 05:38 PM

Getting Started
**
Junior Member
124 posts

Joined: Sep 2005
QUOTE(tan_pang @ Aug 21 2006, 01:41 PM)
aledi make the port forwarding or anythings else??
maybe becoz of both P2P system hv different port using in ur pc
and you didnt forward bitcomet listening port...... icon_idea.gif
maybe...
*
I m not using router wor, just a plain modem, how to do port forwarding for modem?
vearn27
post Aug 21 2006, 08:47 PM

Doink! Doink! Doink!
*******
Senior Member
7,284 posts

Joined: Jan 2003
From: Hong Kong / Malaysia
QUOTE(ibexgeo @ Aug 21 2006, 05:38 PM)
I m not using router wor, just a plain modem, how to do port forwarding for modem?
*
Guide for ya: http://portforward.com/ wink.gif

I'm using BitComet 0.70 and no longer 0.63 coz it's stable already smile.gif

This post has been edited by vearn27: Aug 21 2006, 08:49 PM
TStan_pang
post Aug 22 2006, 01:26 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(vearn27 @ Aug 21 2006, 08:47 PM)
Guide for ya: http://portforward.com/ wink.gif

I'm using BitComet 0.70 and no longer 0.63 coz it's stable already smile.gif
*
what do you mean by "Bitcomet 0.70 stable already"? unsure.gif
is it mean this is the most stable version you ever use?
or juz becoz ur phone line already stable??

coz when i use 0.70
the speed is lower than 0.63
thats why i loyal to 0.63 biggrin.gif
fariz
post Aug 22 2006, 01:28 PM

Tan Sri F
Group Icon
VIP
16,825 posts

Joined: Jan 2003
From: Siberia
QUOTE(ibexgeo @ Aug 21 2006, 05:38 PM)
I m not using router wor, just a plain modem, how to do port forwarding for modem?
*
no need to do port forwarding if you're using modem only..
ibu1980
post Aug 23 2006, 07:22 PM

Senior Citizen
****
Senior Member
598 posts

Joined: Mar 2006
From: 202.1.192.196
QUOTE(ibexgeo @ Aug 21 2006, 12:46 AM)
Does bitcomet restrict full speed dl-ling connection?
I was a bit tornado user, and my dl-ling speed was like 80kB/s on average, max 110kBs. But when using Bitcomet, my speed drop to 5-15kB/s.. Why har?
*
What OS u using? Win Xp Sp 2?

Check under Administrative tools> Event Viewer > System

Check if there is any warning for TCPIP..
super macgyver
post Aug 26 2006, 08:03 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Aug 22 2006, 01:26 PM)
what do you mean by "Bitcomet 0.70 stable already"? unsure.gif
is it mean this is the most stable version you ever use?
or juz becoz ur phone line already stable??

coz when i use 0.70
the speed is lower than 0.63
thats why i loyal to 0.63 biggrin.gif
*
is 0.63 still available to dl? want c the different with my line.
sotong168
post Aug 26 2006, 08:24 PM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(super macgyver @ Aug 26 2006, 08:03 PM)
is 0.63 still available to dl? want c the different with my line.
*
http://www.bitcomet.com/doc/download-achive.htm
heehee even u want antique one oso got
NiTRouSoXide
post Aug 27 2006, 02:39 AM

New Member
*
Junior Member
48 posts

Joined: Aug 2006
to thread starter:the speed you get from your torrent client Most depends on the seeder,peer,port settings,connection speed,nothing to blaim your torrent software,since bitcomet comes with more feature,so i guess it was the best,and the later version is the better
vearn27
post Aug 27 2006, 09:14 AM

Doink! Doink! Doink!
*******
Senior Member
7,284 posts

Joined: Jan 2003
From: Hong Kong / Malaysia
QUOTE(tan_pang @ Aug 22 2006, 01:26 PM)
what do you mean by "Bitcomet 0.70 stable already"? unsure.gif
is it mean this is the most stable version you ever use?
or juz becoz ur phone line already stable??

coz when i use 0.70
the speed is lower than 0.63
thats why i loyal to 0.63 biggrin.gif
*
Nah... I mean bitcomet starting from 0.65 till 0.68 giving a lot of headache for ppl who upgraded coz it's causing major crashing on ur pc... however, the problem didnt persist anymore from 0.69 till 0.70 smile.gif

DL speed of 0.70 lower than 0.63? huh.gif ... doesn't happening to me as I still reach 100kBps++ on good seeds wink.gif
gsan
post Aug 27 2006, 11:09 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
can someone tell me briefly about what's DHT network? should I enable it?

p/s: i'm using ZTE 831 modem with 1 router since 3 pc is using internet at the same time.

This post has been edited by gsan: Aug 27 2006, 11:10 AM
TStan_pang
post Aug 27 2006, 05:29 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(gsan @ Aug 27 2006, 11:09 AM)
can someone tell me briefly about what's DHT network? should I enable it?

p/s: i'm using ZTE 831 modem with 1 router since 3 pc is using internet at the same time.
*
DHT = Distributed Hash Txxxxx (forgot)
you are better enable it
but if you experience slow download on that file
then disable it while you download that file
Skylinestar
post Aug 27 2006, 08:43 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
so many peers but why download so slow?

user posted image
SUSDavid83
post Aug 27 2006, 08:54 PM

20k VIP Club
*********
All Stars
52,874 posts

Joined: Jan 2003
Maybe it's your connection problem ... or port is being blocked.

This post has been edited by David83: Aug 27 2006, 08:54 PM
Skylinestar
post Aug 27 2006, 10:39 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
i'm using streamyx here. how to open the port? i'm using a desktop that is connected to my friend's laptop using LAN cable. my friend's laptop is connected to router-modem by wifi. the linksys router-modem is in the living room. he tells me that he has already do port forwarding on his laptop.

user posted image

This post has been edited by Skylinestar: Aug 27 2006, 10:46 PM
matt_rix
post Aug 27 2006, 10:46 PM

Regular
******
Senior Member
1,680 posts

Joined: Nov 2004
QUOTE(Skylinestar @ Aug 27 2006, 08:43 PM)
so many peers but why download so slow?

user posted image
*
hahaha...i dont think that ur port is being blocked...
just look at ur seeders/peers ratio...
1 seeder for xxxx leechers...
mmm...no wonder why the speed is slow...
u know what i mean...
anyone can correct me if im wrong
edited:
*u can try dl just one torrent at one time...this sumtimes help...
*i hav a q 4 u..does this happens frequently??

This post has been edited by matt_rix: Aug 27 2006, 10:48 PM
Skylinestar
post Aug 27 2006, 10:48 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
How do i know which one is leecher?
matt_rix
post Aug 27 2006, 10:50 PM

Regular
******
Senior Member
1,680 posts

Joined: Nov 2004
QUOTE(Skylinestar @ Aug 27 2006, 10:48 PM)
How do i know which one is leecher?
*
mmm...here what i mean is
leecher=peer
sorry 4 any misunderstanding
toch3
post Aug 27 2006, 10:55 PM

**s3r3nd1p1ty**
*****
Senior Member
912 posts

Joined: Jun 2005
From: Cyber-LaLa
using the lastest one.....gud for me....stable oso..
allvin
post Aug 28 2006, 12:15 PM

......
*******
Senior Member
4,506 posts

Joined: Aug 2005
QUOTE(matt_rix @ Aug 27 2006, 11:50 PM)
mmm...here what i mean is
leecher=peer
sorry 4 any misunderstanding
*
HAHA! YA! We don't want too many leecher, but we want seed rclxms.gif
TStan_pang
post Aug 28 2006, 05:41 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(allvin @ Aug 28 2006, 12:15 PM)
HAHA! YA! We don't want too many leecher, but we want seed  rclxms.gif
*
HAHA!
dun forget that leecher also upload file de
it also help increase dl speed......sweat.gif
fariz
post Aug 28 2006, 05:49 PM

Tan Sri F
Group Icon
VIP
16,825 posts

Joined: Jan 2003
From: Siberia
QUOTE(tan_pang @ Aug 28 2006, 05:41 PM)
HAHA!
dun forget that leecher also upload file de
it also help increase dl speed......sweat.gif
*
leechers usually stop seeding when they finished downloading the files..
Skylinestar
post Aug 28 2006, 07:26 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
QUOTE(Skylinestar @ Aug 27 2006, 10:39 PM)
i'm using streamyx here. how to open the port? i'm using a desktop that is connected to my friend's laptop using LAN cable. my friend's laptop is connected to router-modem by wifi. the linksys router-modem is in the living room. he tells me that he has already do port forwarding on his laptop.

user posted image
*
anyone knows how??

This post has been edited by Skylinestar: Aug 28 2006, 07:27 PM
HMMaster
post Aug 28 2006, 08:59 PM

10K Club
Group Icon
Moderator
10,308 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(Skylinestar @ Aug 28 2006, 07:26 PM)
anyone knows how??
*
make sure that the you forwarded the port in the router to the ip of your pc, and not the ip of your friend's laptop.
Skylinestar
post Aug 29 2006, 09:21 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
QUOTE(HMMaster @ Aug 28 2006, 08:59 PM)
make sure that the you forwarded the port in the router to the ip of your pc, and not the ip of your friend's laptop.
*
how about the ip settings in the LAN properties?
cheese86
post Aug 30 2006, 08:39 AM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
QUOTE(Skylinestar @ Aug 27 2006, 08:43 PM)
so many peers but why download so slow?

user posted image
*
from your screen-shoot

can see that you didn't do any port-forward in your router

even if you have 1000 peer,if you didn't set port-forward in your router..the speed still will be slow.
super macgyver
post Aug 31 2006, 05:27 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
since streamyx limit bt speed, for a rm66 packages now only bt at 56kbps nowadays even no doing port forwarding like me now. =_="
Irishcoffee
post Aug 31 2006, 05:53 PM

ilX / Espressivo
*******
Senior Member
2,994 posts

Joined: Jan 2003
From: Behind You
QUOTE(Skylinestar @ Aug 27 2006, 08:43 PM)
so many peers but why download so slow?

user posted image
*
the pic show me u havnet do port foward coz "local"
TStan_pang
post Aug 31 2006, 11:41 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(fariz @ Aug 28 2006, 05:49 PM)
leechers usually stop seeding when they finished downloading the files..
*
but before stop seeding
it also help increase ur download speed... icon_idea.gif

i juz hope there no any ppl like my stupid friend
he juz limit his upload speed to 2kbps
when i ask him to increase it
he said:"you are silly ar? that upload file to other ppl!"
i think he really silly
think that upload file will make file lost.... shakehead.gif doh.gif
upload file didnt mean you will lost the file!!!!!

hope no one in here will think like that
and let it be a reason for a selfish ppl
shady
post Sep 1 2006, 05:39 PM

The Real Slim Shady
*******
Senior Member
2,818 posts

Joined: Jan 2003
From: Hokkaido, Japan
im used bit comet before and then switched to utorrent. i find u torrent is much better, faster and takes up less resource. i really recommend utorrent over any other clients.
super macgyver
post Sep 2 2006, 10:55 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(shady @ Sep 1 2006, 05:39 PM)
im used bit comet before and then switched to utorrent. i find u torrent is much better, faster and takes up less resource. i really recommend utorrent over any other clients.
*
but sumtime the seed will moved very slowly after a while, but after i shift the half dl to bitcomet, it just run 58kbps. laugh.gif
haobeck
post Sep 2 2006, 11:06 AM

~ n!c3 b0dy ~
******
Senior Member
1,434 posts

Joined: May 2006
So hard to understand the portforward website...complicated! rclxub.gif rclxub.gif

Anyway...what's the U-torrent website neh?Does U-torrent need portforward too?

I'm using Bitorrent 0.58 ..wahaha..classic one. tongue.gif
fariz
post Sep 2 2006, 11:59 AM

Tan Sri F
Group Icon
VIP
16,825 posts

Joined: Jan 2003
From: Siberia
it's µTorrent, not U-Torrent

the site is http://www.utorrent.com/

any client needs portforwarding if you're behind a router/firewall
sotong168
post Sep 2 2006, 10:14 PM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
nah, v0.71 is released, go and grab it lah
super macgyver
post Sep 3 2006, 07:08 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(sotong168 @ Sep 2 2006, 10:14 PM)
nah, v0.71 is released, go and grab it lah
*
any new feature?
player10
post Sep 3 2006, 07:20 PM

Getting Started
**
Junior Member
235 posts

Joined: Sep 2005
my average dl speed is 60k/bs , for rm66 tmnet streamyx
TStan_pang
post Sep 3 2006, 07:25 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(player10 @ Sep 3 2006, 07:20 PM)
my average dl speed is 60k/bs , for rm66 tmnet streamyx
*
rclxms.gif
you are in heaven...

my fastest speed is only 50kbps
and i just got this speed when the seed is still fresh + many seed......

the file that you download is the lastest file?
(dun talk about the file that you dl...)
sotong168
post Sep 3 2006, 07:28 PM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(super macgyver @ Sep 3 2006, 07:08 PM)
any new feature?
*
http://forum.lowyat.net/index.php?showtopi...view=getnewpost

but someone say 0.71 won't let u limit the upload spd shakehead.gif
kc_soo
post Sep 3 2006, 07:34 PM

On my way
****
Junior Member
511 posts

Joined: Nov 2004
From: KL PJ
how to do port forwarding ??
any website guard introduce??

from soo
sotong168
post Sep 3 2006, 07:38 PM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(kc_soo @ Sep 3 2006, 07:34 PM)
how to do port forwarding ??
any website guard introduce??

from soo
*
http://www.portforward.com/
kc_soo
post Sep 3 2006, 07:52 PM

On my way
****
Junior Member
511 posts

Joined: Nov 2004
From: KL PJ
thankx~~ sotong
TStan_pang
post Sep 3 2006, 09:54 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(kc_soo @ Sep 3 2006, 07:34 PM)
how to do port forwarding ??
any website guard introduce??

from soo
*
but if you use the modem Riger DB102
the portforward website didnt hv any info about it......

so, dun get Riger DB102 as ur modem!!!!!!
kc_soo
post Sep 4 2006, 12:46 AM

On my way
****
Junior Member
511 posts

Joined: Nov 2004
From: KL PJ
my house is using a router connect to a 8 ports switch..
izzit can set the portforward as normal mention in that website??

from soo
player10
post Sep 4 2006, 09:56 AM

Getting Started
**
Junior Member
235 posts

Joined: Sep 2005
QUOTE(tan_pang @ Sep 3 2006, 07:25 PM)
rclxms.gif
you are in heaven...

my fastest speed is only 50kbps
and i just got this speed when the seed is still fresh + many seed......

the file that you download is the lastest file?
(dun talk about the file that you dl...)
*
your fresh degree is ? seed about passed one month also speed like that thumbup.gif
super macgyver
post Sep 6 2006, 01:29 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(player10 @ Sep 3 2006, 07:20 PM)
my average dl speed is 60k/bs , for rm66 tmnet streamyx
*
u r fast, mine now is just 54kbps. sad.gif
yamato
post Sep 6 2006, 11:04 PM

stop calling me yameteh =.=|||
*****
Senior Member
760 posts

Joined: Aug 2006
From: coming back through stratosphere
QUOTE(tan_pang @ Jul 7 2006, 10:50 PM)
Note: For general BT queries, please read this post first.
-----------------------------------------------------------------
my fren said to me that BitComet v0.57 is best
got fastest speed

then another fren said that "as long as it is not >v0.60, then it is better"

becoz of that, i use bitcomet 0.57
but the connect speed suck
so, i try the newest version, bitcomet v0.70
but the connect speed is getting slower
then i downgrade it back to 0.57

after that, i try v0.63, it get more speed than v0.57!
even got 20kb/s dl speed when at afternoon! (if use 0.57, juz around 10-15kb/s dl speed)

now, im confused about the bitcomet version
wat version you all use, and wat version do you think that can get the highest speed?
*
crap! version does not affact the DL speed.
all you need to do is look for "local seeder", as many as possible, this is the key in high spped DL.
glen_cct
post Sep 7 2006, 02:31 AM

.:: [　ä»ï¼Žç¾©ã€€] ::.
****
Senior Member
584 posts

Joined: Jan 2003
From: :: [　IPH & SG　] ::
So in BitComet 0.71, which the Option configure the TCP/IP is located..
Option > Preference > TCP/IP Limit.

[B]AND DO NOT USE IT TO MODIFY YOUR SYSTEM FILE!!
It would crash your TCP/IP System File and windows couldn't detect your connection in the Network Card.[/B]




I know this topic suppose to open in Technical or Software Section.
BUT most users are BT hardcore in here and most using BitComet though.

HERE the 0.71 version is about the new design.
Inside got an option which could modify the TCP/IP system file by setting the 'TCP Half-Open Limit'.

I know, some people are using that a FIXED TCP/IP patch which is hot spreading in the Website and run it just edit the System File in the Dos Mode thing.
But recently, that thing is not allow to run anymore for the UPDATED WinXP SP2 or those PC with newest WinXP installed.





So here is what my experienced.
Story... ... ... ...
Yesterday i was upgraded to 0.71, i found that the TCP/IP option!!
i felt "wow this is make much easy for me." I go and make changes... back problem appear.

I tried everything out, firstly i though it was Router F up!! and i checked NO! is not, i even had OPERATION to my PC!! but things is fine!...

Today i have formatted my PC, everything back to normal. After that the problem come back again~ i'm shocked!! tried everything and check, i'm thinking "it's virus?!"

After 6hrs checking, that i realize is this TCP/IP thingy!!
Because the most early program installed and configure is BitComet 0.71 and the TCP/IP Setting as well.
Problem occur will make log into the EVENT VIEWER and those Logs would keep saying the SSDP Service started and stop, TCP/IP is failed to Initialize.

here the Event ID code... 7000, 7001, 7036.
Story Finish, this is what happening to me. And share with you guys!!
So please dont risk to try it guys ~~"

Dont open fire to me hor... if i make mistake.
Sorry for Little boy's BAD English.
warez
post Sep 7 2006, 02:39 AM

Team Ayu 「浜崎あゆみ」
******
Senior Member
1,868 posts

Joined: Nov 2004
From: 地球
I'm not BC user so this info maybe usefull for others,anyway thanks for telling us.
mengsuan
post Sep 7 2006, 02:46 AM

9W2NNS
Group Icon
Staff
10,459 posts

Joined: Sep 2005
From: Puchong
I am all the while using the lvllord.de patch and it is safe. Maybe there is a newer update from microsoft but I am not affected yet.
ah_chak
post Sep 7 2006, 03:42 AM

Vroom..
*******
Senior Member
2,341 posts

Joined: Jan 2003
From: Miri
BitComet sucks.. uTorrent rulz.. nuff said..

If 1 out of 15 of my housemates turns Bitcomet on.. I can go to sleep straight away.. 2 of them actually kena by me kau kau when this happened.. i installed uTorrent for them and my headache gone in a blink of an eye.. laugh.gif
glen_cct
post Sep 7 2006, 03:50 AM

.:: [　ä»ï¼Žç¾©ã€€] ::.
****
Senior Member
584 posts

Joined: Jan 2003
From: :: [　IPH & SG　] ::
Hahah~ i use 2 of them tongue.gif
uTorrent + BitComet

anywhere, just hope not another victim like me...
like to try new thing, hahaha~ got into the trap. being white-mouse

installing back the application, utilities and programs now.. sigh~
cyberic
post Sep 7 2006, 07:27 AM

Regular
******
Senior Member
1,125 posts

Joined: Jan 2003
hmm..dunno about u..the lvllord.de's patch still work on my pc..let me check whether got any new microsoft update or not

EDIT: just check..no new update ler.. how the patch is not working on ur pc?

This post has been edited by cyberic: Sep 7 2006, 07:44 AM
sotong168
post Sep 7 2006, 07:46 AM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
@glen_cct, report this to the author, expect to have 0.72 soon, now stick to 0.71
haobeck
post Sep 9 2006, 12:08 PM

~ n!c3 b0dy ~
******
Senior Member
1,434 posts

Joined: May 2006
Followed what the portforward.com illustrate..

Still cannot find my DNS server number.

So at last..Portforwarding fail !!!

how to gain DNS server number..
coz mine DNS number are same with Ip Address. icon_question.gif icon_question.gif
super macgyver
post Sep 9 2006, 01:05 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(haobeck @ Sep 9 2006, 12:08 PM)
Followed what the portforward.com illustrate..

Still cannot find my DNS server number.

So at last..Portforwarding fail !!!

how to gain DNS server number..
coz mine DNS number are same with Ip Address. icon_question.gif  icon_question.gif
*
wat modem u using?
Kagaya
post Sep 9 2006, 03:33 PM

Bad-Badtz Maru FREAK !!!
Group Icon
Elite
2,396 posts

Joined: Jan 2003
From: Pandan Perdana, Cheras, KL
no wonder my modem go blank...

I've used the lvllord thingy, nothing seems to bother.

But the BC 0.71 really got the Half open TCP/IP setting, so, should I let it be 100, or back to 10, or is there anyway to make it an AUTOMATICALLY configured settings by BC?
Alpha_Tay
post Sep 9 2006, 03:48 PM

Beware The Spammer Star!
******
Senior Member
1,725 posts

Joined: Jan 2003
as i know µTorrent has such an option too, by it is just setting the software side about how many connection they can try to connect concurrently, without effect the system side.
KenL
post Sep 9 2006, 03:53 PM

Casual
***
Junior Member
416 posts

Joined: Jan 2003
From: Miri
how to restore to the original file?
i already use bitcomet patch thing now my connection is all messed up.
TStan_pang
post Sep 9 2006, 10:22 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
it can't run in winxp sp2?? unsure.gif
but anyway
i wont use the lastest version, coz it always popular with bugs

wait till it fixed first
fariz
post Sep 9 2006, 10:43 PM

Tan Sri F
Group Icon
VIP
16,825 posts

Joined: Jan 2003
From: Siberia
QUOTE(glen_cct @ Sep 7 2006, 02:31 AM)
But recently, that thing is not allow to run anymore for the UPDATED WinXP SP2 or those PC with newest WinXP installed.
*
it still works on the latest updated WinXP SP2
shadowofevil
post Sep 10 2006, 10:42 PM

Regular
******
Senior Member
1,763 posts

Joined: Nov 2004
From: GrAVe YArd
mine experience is sometime the bitcomet crashreport pop up experience in 0.70 and 0.69 version....wonder it will corrupt my download stuff anot....sad.gif

the weird part is although it pop up the crashreport stuff...but my bitcomet dint really crash..and still downloading......
super macgyver
post Sep 11 2006, 07:39 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
the 0.71 is very terrible, it wont allow user to set limit for upload speed. doh.gif:
sotong168
post Sep 11 2006, 08:00 AM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(super macgyver @ Sep 11 2006, 07:39 AM)
the 0.71 is very terrible, it wont allow user to set limit for upload speed. doh.gif:
*
yeah, tat is going to choke our dl bandwidth sweat.gif
skylands
post Sep 12 2006, 01:21 PM

Enthusiast
*****
Senior Member
713 posts

Joined: Mar 2005
lol , i still using the old one .. lazy to downlaod latest ... but .. it still working smooth .. so ... donto bother it

TStan_pang
post Sep 12 2006, 02:50 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(skylands @ Sep 12 2006, 01:21 PM)
lol , i still using the old one .. lazy to downlaod latest ... but .. it still working smooth .. so ... donto bother it
*
thats why i loyal to v0.63!! rclxms.gif
coz it use the lastest also same...

and now the 0.71 got many problem...
i afraid to use it liao...
cheese86
post Sep 12 2006, 04:08 PM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
QUOTE(tan_pang @ Sep 12 2006, 02:50 PM)
thats why i loyal to v0.63!! rclxms.gif
coz it use the lastest also same...

and now the 0.71 got many problem...
i afraid to use it liao...
*
0.63 seem to be the best of all

no problem even after i change to service pack 2 rclxms.gif
sotong168
post Sep 12 2006, 04:08 PM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
@skylands & tan_pang, 0.70 is stable, no worry on it
SUSsynz
post Sep 12 2006, 05:17 PM

vas te faire enculé
*******
Senior Member
2,642 posts

Joined: Apr 2006
QUOTE(sotong168 @ Sep 12 2006, 04:08 PM)
@skylands & tan_pang, 0.70 is stable, no worry on it
*
i got no problem using 0.70
super macgyver
post Sep 12 2006, 06:26 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
after use 0.71, i quick revert back to 0.70. sweat.gif
SUSsynz
post Sep 12 2006, 06:27 PM

vas te faire enculé
*******
Senior Member
2,642 posts

Joined: Apr 2006

luckily i didnt upgrade to 0.71
TStan_pang
post Sep 12 2006, 10:27 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Sep 12 2006, 06:26 PM)
after use 0.71, i quick revert back to 0.70. sweat.gif
*
haha!! laugh.gif
in the bitcomet website statd that bitcomet v0.70 is the "Last Stable Official Release"
but not bitcomet 0.71
i think v0.71 is still the beta test stage
maybe need 2 more month to fix all the bug
and make it stable...
kenneth87
post Sep 13 2006, 02:41 AM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


Sry for asking a noob question here. But yet it is still related to bcomet. I subscribe streamyx 1mbsp RM88 package. I did some research which many ppl can blast their dl speed to 80 - 90 kb / sec. BUt mine normally will stay in between 5 - 10. Same package subscribe but so much difference?? I think thats imposible. SO i jz wana ask u guys what kind of solution for me to reach that speed??
sotong168
post Sep 13 2006, 08:49 AM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
@kenneth87, many factors that could coz slow BT, head over to below sticky threads for solutions:

http://forum.lowyat.net/index.php?showtopic=266382
http://forum.lowyat.net/index.php?showtopic=282704
http://forum.lowyat.net/index.php?showtopic=282695
Confession
post Sep 14 2006, 06:30 PM

Enthusiast
*****
Senior Member
726 posts

Joined: Dec 2005
I have download speed issues. I'm using Aztech DSL305E btw , if the modem runs on router mode, the speed will decrease to very low 10kb but after switch back to bridge mode , the speed increase to 35kb , anyone know what is the problem i facing ? sad.gif
TStan_pang
post Sep 14 2006, 09:07 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Confession @ Sep 14 2006, 06:30 PM)
I have download speed issues. I'm using Aztech DSL305E btw , if the modem runs on router mode, the speed will decrease to very low 10kb but after switch back to bridge mode , the speed increase to 35kb , anyone know what is the problem i facing ? sad.gif
*
Bridge mode is dedicated for 1pc to online
next time switch to Bridge mode when using bt...
sotong168
post Sep 14 2006, 09:34 PM

in retiring mode
*******
Senior Member
5,291 posts

Joined: Dec 2004
From: I Luv Msia
QUOTE(Confession @ Sep 14 2006, 06:30 PM)
I have download speed issues. I'm using Aztech DSL305E btw , if the modem runs on router mode, the speed will decrease to very low 10kb but after switch back to bridge mode , the speed increase to 35kb , anyone know what is the problem i facing ? sad.gif
*
portforward is the main culprit suppose, u will need to do portfoward in router mode
TStan_pang
post Sep 14 2006, 09:51 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(sotong168 @ Sep 14 2006, 09:34 PM)
portforward is the main culprit suppose, u will need to do portfoward in router mode
*
oo
soli for my poor knowledge in these kind of problem

anyway, i hv found something inside the wikipedia
» Click to show Spoiler - click again to hide... «
0oDURONo0
post Sep 14 2006, 09:56 PM

Getting Started
**
Junior Member
79 posts

Joined: Jun 2006
From: Klang
My area here in klang don't have any problem, i'm using 0.70 and i didn't set any setting in my router, i can get 100-120+ for my 1mb line when there is alot of seed and peer, dl anime like naruto and bleach only take 20-30 mins.
kenneth87
post Sep 15 2006, 06:58 AM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


QUOTE(sotong168 @ Sep 13 2006, 08:49 AM)
@kenneth87, many factors that could coz slow BT, head over to below sticky threads for solutions:

http://forum.lowyat.net/index.php?showtopic=266382
http://forum.lowyat.net/index.php?showtopic=282704
http://forum.lowyat.net/index.php?showtopic=282695
*
Woohoo......jz did the port forward.... Guess what.. My dl speed from 5-10 kb/ sec blast up to 70- 100 kb/sec... Mr sotong, really tq a lot... Besides, i also noe how to port forward adi.. Jz a piece of cake oni. Before that i tot vry hard, but after viewing some articles and comment from those link then try it out myself and now everything is done...Really appreciate it and thinking back y last time im so stupid for not trying it out.... icon_rolleyes.gif
kyoko4eva
post Sep 15 2006, 09:13 PM

idle!
*****
Senior Member
908 posts

Joined: Feb 2005
From: Home
all the problems with the new version gave me the best reason to stick with v0.63
evilhomura89
post Sep 15 2006, 09:26 PM

Look at all my stars!!
*******
Senior Member
5,886 posts

Joined: Jan 2003
From: BM
Thx 4 informing us.
Luckily i din upgrade mine yet, still using 0.70 without any prob.
WebHour
post Sep 16 2006, 08:07 AM

Getting Started
**
Junior Member
272 posts

Joined: Jan 2003
From: Ipoh, Subang
facing problem when using bitcomet while surfing.. all the website seems cannot be surf/load, but when i closed the bitcomet then everything goes fine, anyone know how to fix this problem?
TStan_pang
post Sep 16 2006, 09:36 AM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
anyone at here aledi try v0.72??
dun said it cannot set upload limit again......sweat.gif
» Click to show Spoiler - click again to hide... «

» Click to show Spoiler - click again to hide... «


This post has been edited by tan_pang: Sep 16 2006, 09:41 AM
super macgyver
post Sep 16 2006, 01:52 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(kenneth87 @ Sep 15 2006, 06:58 AM)
Woohoo......jz did the port forward.... Guess what.. My dl speed from 5-10 kb/ sec blast up to 70- 100 kb/sec... Mr sotong, really tq a lot... Besides, i also noe how to port forward adi.. Jz a piece of cake oni. Before that i tot vry hard, but after viewing some articles and comment from those link then try it out myself and now everything is done...Really appreciate it and thinking back y last time im so stupid for not trying it out....  icon_rolleyes.gif
*
the link is very useful , i iwll try it tonite too.
Jusoh
post Sep 16 2006, 10:05 PM

Getting Started
**
Junior Member
239 posts

Joined: May 2005
Aiyooo....just try latest 0.72....not stable...run for 1 minute and its crashed...maybe its not compatible with my com...revert back to 0.70... rclxub.gif
Strike
post Sep 16 2006, 10:19 PM

Getting Started
**
Junior Member
51 posts

Joined: Jan 2003
From: KL
QUOTE(WebHour @ Sep 16 2006, 08:07 AM)
facing problem when using bitcomet while surfing.. all the website seems cannot be surf/load, but when i closed the bitcomet then everything goes fine, anyone know how to fix this problem?
*
my prob almost same as above but worse, after close bitcomet still cannot surf. just got the prob today
ezone
post Sep 16 2006, 10:47 PM

Getting Started
**
Junior Member
220 posts

Joined: Sep 2005
Hi..anyone can help on this?
May i know why i couldn't run Morpheus and Bitcomet 0.70 at the same time.
The donwload speed of Morpheus will be dropped immediately until 0 after i run Bitcomet in my pc.
However, the speed will be running at normal after i close the bitcomet application. Any idea ???

====================

I also having the bitcomet speed problem. It seems like the speed will be very slow started from evening. i read the thread in low yat but still not sure what is the problem. Anyone know about it?

==============================

i have tried to do port forwarding for my P2P applications Bitcomet , Morpheus and Emule. Unfortunately, it seems didn't take effect on them. any suggestion how to make the best configuration for those P2P application.

Thanks for the reply.
super macgyver
post Sep 17 2006, 01:58 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(ezone @ Sep 16 2006, 10:47 PM)
Hi..anyone can help on this?
May i know why i couldn't run Morpheus and Bitcomet 0.70 at the same time.
The donwload speed of Morpheus will be dropped immediately until 0 after i run Bitcomet in my pc.
However, the speed will be running at normal after i close the bitcomet application. Any idea ???

====================

I also having the bitcomet speed problem. It seems like the speed will be very slow  started from evening. i read the thread in low yat but still not sure what is the problem. Anyone know about it?

==============================

i have tried to do port forwarding for my P2P applications Bitcomet , Morpheus and Emule. Unfortunately, it seems didn't take effect on them. any suggestion how to make the best configuration for those P2P application.

Thanks for the reply.
*
use 1 at a time.
royalz
post Sep 17 2006, 09:51 PM

On my way
****
Junior Member
642 posts

Joined: Jul 2006
err ... guys ..what will u do if the file u trying to dwl stuck and stop dwlding ..it seems that the file wont continue download anymore ? how to play it?the preview thing in bit comet doesn't seems to work ...i use window media player to open it but cannot ..how ? sad.gif sad.gif sad.gif sad.gif
muqaddam
post Sep 17 2006, 09:55 PM

Getting Started
**
Junior Member
266 posts

Joined: Mar 2006
From: Shah Alam
hurm, fyi, the preview thingy will never work...(it dont work for me too)..one tip for u to preview the file, copy the downloaded file (whether it's completed or not, just copy) n then, go to Folder Options and go to "View" tab.. untick the "Hide extensions for known file types" menu. Erase ".bc" extension for BitComet n u will see it with the extension that it should have. Eg: "Hahaha.avi.bc!" to "Hahaha.avi" Got it? Then play using normal player.
Zzz...
post Sep 17 2006, 09:59 PM

Casual
***
Junior Member
456 posts

Joined: Nov 2004
Yea tat method works but for imcomplete d/l b prepared for lots of disturbance or inteference in the video.......As for the file d/l problem, either wait for more seeds to come online n seed, or try d/l another file but with more seeds
xeno
post Sep 17 2006, 10:00 PM

Enthusiast
*****
Senior Member
938 posts

Joined: Jan 2003
Please make sure the % you download isn't like 30% or 50% at least 80%.
Sometimes if your first piece of the video haven't complate yet , you wouldn't be able to view
Try vlc palyer if you want to try.
TStan_pang
post Sep 17 2006, 10:27 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(muqaddam @ Sep 17 2006, 09:55 PM)
hurm, fyi, the preview thingy will never work...(it dont work for me too)..one tip for u to preview the file, copy the downloaded file (whether it's completed or not, just copy) n then, go to Folder Options and go to "View" tab.. untick the "Hide extensions for known file types" menu. Erase ".bc" extension for BitComet n u will see it with the extension that it should have. Eg: "Hahaha.avi.bc!" to "Hahaha.avi" Got it? Then play using normal player.
*
the effect is same when you open it with media player classic......
without change the extension name

if that movie stuck at that percentage and didnt hv seed anymore
then you better find another seed...

This post has been edited by tan_pang: Sep 18 2006, 01:37 PM
fariz
post Sep 17 2006, 10:33 PM

Tan Sri F
Group Icon
VIP
16,825 posts

Joined: Jan 2003
From: Siberia
merged.
TStan_pang
post Sep 22 2006, 08:05 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
dunno why, this lately
i get very slow dl speed...

even there hv many seed and peers
but the speed is below 10kbps

do someone encounter this now??
eXyzt
post Sep 22 2006, 11:49 PM

Regular
******
Senior Member
1,410 posts

Joined: Jan 2005
From: Kay El
i remember for bitcomet ver 0.57, many sites block their usage coz they pretend to forward packets when they actually don't. there was a patch that prevent this from happening so that bitcomet could be used on any site.

i was wondering, is the latest version still pulling the same trick and if so, is there any patch for this now? coz i tried to download a torrent and bitcomet tells me that the site blocked the downloads...
lancemapei
post Sep 23 2006, 01:44 AM

New Member
*
Junior Member
13 posts

Joined: Jul 2005
this few day BT download speed very slow some people say use bitcomet v0.70 can solve the problem but.... vmad.gif i try before v0.70 and now using v0.63 still some mad.gif
unknown
post Sep 23 2006, 01:46 AM

10k Club
********
All Stars
12,012 posts

Joined: Jan 2003
From: Kuala Lumpur
I'm use v0.70. I don't think is Bitcomet problem, is streamyx problem. I have few fren have slow speed this few day.
MangKoK^ayon
post Sep 23 2006, 01:49 AM

look at my stars
*****
Senior Member
859 posts

Joined: Jun 2005
From: anywhere
using 0.7 also here...speed is okay...if slow means streamyx problem... smile.gif
delon85
post Sep 23 2006, 01:50 AM

Ad Astra
******
Senior Member
1,061 posts

Joined: Jan 2003
i wonder why some people still use bitcomet. i used to use bitcomet but stopped when i read many articles saying bitcomet have some loopholes that causes it to be blocked by many trackers last time. it also reports download speed that are actually not accurate, probably mixed it with the bandwidth used to find peers.
lancemapei
post Sep 23 2006, 01:52 AM

New Member
*
Junior Member
13 posts

Joined: Jul 2005
QUOTE(delon85 @ Sep 23 2006, 01:50 AM)
i wonder why some people still use bitcomet. i used to use bitcomet but stopped when i read many articles saying bitcomet have some loopholes that causes it to be blocked by many trackers last time. it also reports download speed that are actually not accurate, probably mixed it with the bandwidth used to find peers.
*
so what client u using??? icon_question.gif
super macgyver
post Sep 23 2006, 12:39 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(delon85 @ Sep 23 2006, 01:50 AM)
i wonder why some people still use bitcomet. i used to use bitcomet but stopped when i read many articles saying bitcomet have some loopholes that causes it to be blocked by many trackers last time. it also reports download speed that are actually not accurate, probably mixed it with the bandwidth used to find peers.
*
u using utorrent? fast arh? drool.gif
-vip3rleon9-
post Sep 23 2006, 12:56 PM

.:νιÏÑÑıÑои9:.
*******
Senior Member
7,516 posts

Joined: Jun 2005
From: Petaling Jaya
hey guyz.. i'm on BitComet 0.65 Stable Release.. this few days when i want to download movies, BitComet will consistantly give out errors..

anyone able to help me?
TStan_pang
post Sep 23 2006, 02:05 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
oh man, this lately BitComet really got many problem
and i think it is maybe becoz of the Streamyx problem...

becoz my fren also like that
0.57------slow
0.63------slow
0.70------same

even got 30 seed/1000+ peer also like that...
really dunno what happening this lately...
emino
post Sep 23 2006, 02:25 PM

IG - riezforester
*******
Senior Member
5,967 posts

Joined: Oct 2004
From: Malaysia... Duh!
I also seems to be experiencing slow speed during the day, it's improved at nights but not much.
cajun2de
post Sep 23 2006, 02:42 PM

de Reaper
*******
Senior Member
2,791 posts

Joined: Sep 2005
From: Ipoh/Melaka
well it has nuthing to do with the cilen if u ask me ...it's all dependin on the streamyx connection....been usin various version frm V.5 - 0.7 (current)....i get full speed everyday with no probs.

i'm on 512k package n my speed is usually 50kb-60kb
TStan_pang
post Sep 23 2006, 03:57 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(cajun2de @ Sep 23 2006, 02:42 PM)
well it has nuthing to do with the cilen if u ask me ...it's all dependin on the streamyx connection....been usin various version frm V.5 - 0.7 (current)....i get full speed everyday with no probs.

i'm on 512k package n my speed is usually 50kb-60kb
*
even get full speed in this lately?? unsure.gif
coz i also can get 40-50 dl speed de
but dunno why
the speed very slow

did TMNet hv done something that can block us??
even we set Protocol Encryption as ON......
khsj
post Sep 23 2006, 04:01 PM

Smiley
******
Senior Member
1,085 posts

Joined: Jan 2003
From: Pearl of the Orient
QUOTE(tan_pang @ Sep 23 2006, 03:57 PM)
even get full speed in this lately?? unsure.gif
coz i also can get 40-50 dl speed de
but dunno why
the speed very slow

did TMNet hv done something that can block us??
even we set Protocol Encryption as ON......
*
yup tmnet mught have done something

http://forum.lowyat.net/index.php?showtopic=343157
super macgyver
post Sep 23 2006, 04:06 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
i had slow bt with my bitcomet since tis tuesday, dunno why, mine ver is 0.70
TStan_pang
post Sep 23 2006, 05:01 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Sep 23 2006, 04:06 PM)
i had slow bt with my bitcomet since tis tuesday, dunno why, mine ver is 0.70
*
aledi try 3 version
v0.57, v0.63, and v0.70
all cannot!!!

upload didnt hv problem
but the dl really suck!!!

actually, khsj
what they hv done??

This post has been edited by tan_pang: Sep 23 2006, 05:02 PM
super macgyver
post Sep 24 2006, 02:34 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Sep 23 2006, 05:01 PM)
aledi try 3 version
v0.57, v0.63, and v0.70
all cannot!!!

upload didnt hv problem
but the dl really suck!!!

actually, khsj
what they hv done??
*
i also dun know wat happeneed, uploda damn faster than normal day, but dl speed is just xkbps. doh.gif
narutokun83
post Sep 24 2006, 03:01 AM

Look at all my stars!!
*******
Senior Member
2,108 posts

Joined: Jan 2003
yeah... i wondering about that too, upload full speed, Dl like crap
super macgyver
post Sep 24 2006, 04:14 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
but sum selayang fren said his peed still around 80kbps, tis make me confuss. i also selayang ler.
ibu1980
post Sep 26 2006, 03:11 AM

Senior Citizen
****
Senior Member
598 posts

Joined: Mar 2006
From: 202.1.192.196
Tmnet must have really done something.. i cant get full download speed as before.. damn it.. usually night time suppose to be faster.. but now not tat fast either.. once in a while..its fast.. but then i suspect they blocking p2p traffic to some extent now.. arghhh.. crap
boxset
post Sep 26 2006, 03:22 AM

Getting Started
**
Junior Member
64 posts

Joined: Jun 2006
i'm having a same problem too..my downloading wont go beyond 10kb..
what's wrong with streamyx nowadays? ..so worst !
Irishcoffee
post Sep 26 2006, 06:55 PM

ilX / Espressivo
*******
Senior Member
2,994 posts

Joined: Jan 2003
From: Behind You
TMnut started throttling torrent!!
12am-12pm
TStan_pang
post Sep 26 2006, 08:47 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Irishcoffee @ Sep 26 2006, 06:55 PM)
TMnut started  throttling torrent!!
12am-12pm
*
not 12am-12am meh~~ unsure.gif
now daylight or midnight also encounter slow download in bt......
super macgyver
post Sep 26 2006, 10:20 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
now my one is just 1kbps. =_=
TStan_pang
post Sep 27 2006, 04:19 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
did someone aledi try BitComet v0.73??

how is the dl speed??
6GDominator
post Sep 27 2006, 04:52 PM

ThE NeW SpAm KiNg~.~
*******
Senior Member
3,407 posts

Joined: Apr 2005
From: The Great L'verpool Training Academy , Cher@S
hey guys, i want to ask what website can help me to check whether my port is open or not? thanks ah..
Irishcoffee
post Sep 27 2006, 05:14 PM

ilX / Espressivo
*******
Senior Member
2,994 posts

Joined: Jan 2003
From: Behind You
QUOTE(tan_pang @ Sep 26 2006, 08:47 PM)
not 12am-12am meh~~ unsure.gif
now daylight or midnight also encounter slow download in bt......
*
dunnoe y my case is quite weird
i can gain high speed @ day low speed @ night
for normal user 12pm-12am
TStan_pang
post Sep 27 2006, 05:30 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(6GDominator @ Sep 27 2006, 04:52 PM)
hey guys, i want to ask what website can help me to check whether my port is open or not? thanks ah..
*
try this
https://www.grc.com/x/ne.dll?bh0bkyd2

press "Proceed" first
type ur port no. in the space there
and then press "User Specific Custom Port Probe"

This post has been edited by tan_pang: Sep 27 2006, 05:39 PM
6GDominator
post Sep 27 2006, 05:42 PM

ThE NeW SpAm KiNg~.~
*******
Senior Member
3,407 posts

Joined: Apr 2005
From: The Great L'verpool Training Academy , Cher@S
cannot lah bro. the result for my examine of my port is Stealth. so how am i gonna open my port. i am using D-Link 500T. anyone using this? i already go to virtual port there and set already but still cannot open lah. can someone help me? sad.gif
TStan_pang
post Sep 27 2006, 06:01 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(6GDominator @ Sep 27 2006, 05:42 PM)
cannot lah bro. the result for my examine of my port is Stealth. so how am i gonna open my port. i am using D-Link 500T. anyone using this? i already go to virtual port there and set already but still cannot open lah. can someone help me? sad.gif
*
my port also close before
but the speed is normal......
so, i dont bother it...

after reformat pc
my bt speed go back to 20+kbps dl liao~~~ biggrin.gif
goliath
post Oct 1 2006, 12:54 PM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
I'm not sure whether this problem has been asked before or not.

After an hour or so usage of Bitcomet, I can't surf using IE or Firefox. Is it common? I have to restart my laptop.
HMMaster
post Oct 1 2006, 01:08 PM

10K Club
Group Icon
Moderator
10,308 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(goliath @ Oct 1 2006, 12:54 PM)
I'm not sure whether this problem has been asked before or not.

After an hour or so usage of Bitcomet, I can't surf using IE or Firefox. Is it common? I have to restart my laptop.
*
i suspect that that you have bad router. try disabling dht and reduce the number connection per torrent. this might help.
nckent
post Oct 1 2006, 01:48 PM

||>e-M'si@n<||
****
Senior Member
676 posts

Joined: Feb 2006
From: Petaling Jaya
my bitcomet dl speed around 50kb/s (512kbps package)
i think telekom still not throttle bt at my place (pahang)
nckent
post Oct 1 2006, 01:49 PM

||>e-M'si@n<||
****
Senior Member
676 posts

Joined: Feb 2006
From: Petaling Jaya
i do nothing on bitcomet settings
but oni open port on both router & firewall 2 get full speed

This post has been edited by nckent: Oct 1 2006, 04:50 PM
ImanAzlan
post Oct 1 2006, 02:07 PM

Enthusiast
*****
Senior Member
957 posts

Joined: Apr 2006
How do I know my port?
super macgyver
post Oct 1 2006, 02:32 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
tis version can limit upload speed arh?
ezone
post Oct 1 2006, 03:08 PM

Getting Started
**
Junior Member
220 posts

Joined: Sep 2005
Anyone using Bitcomet 0.73?
Does it solve the speed problem?
super macgyver
post Oct 1 2006, 03:14 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(ezone @ Oct 1 2006, 03:08 PM)
Anyone using Bitcomet 0.73?
Does it solve the speed problem?
*
speed got nothing related to version ler, but more on other condition.
TStan_pang
post Oct 1 2006, 05:42 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 1 2006, 03:14 PM)
speed got nothing related to version ler, but more on other condition.
*
yaya
i change to v73 before
it seen that the most useful about 0.73 is it can scan for virus after dl

i think juz like that only
it still cant penetrate the TMnet traffic shaping......
goliath
post Oct 1 2006, 05:47 PM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(HMMaster @ Oct 1 2006, 01:08 PM)
i suspect that that you have bad router. try disabling dht and reduce the number connection per torrent. this might help.
*
Alright. Thanks.

I have disable the DHT. And put 150 connections per task. Trying out now.

Before all these, I only installed Bitcomet and used it without messing around with preference settings. No problem until I start messing with Connections per task

This post has been edited by goliath: Oct 1 2006, 05:48 PM
linkinpark
post Oct 2 2006, 01:15 PM

Casual
***
Junior Member
454 posts

Joined: Jan 2003
From: KL
I used for 3days the 0.73 same crashes happen C++ runtime error.
super macgyver
post Oct 2 2006, 02:53 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(linkinpark @ Oct 2 2006, 01:15 PM)
I used for 3days the 0.73 same crashes happen C++ runtime error.
*
quick reverse back to 0.70 loh.
TStan_pang
post Oct 2 2006, 04:05 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 2 2006, 02:53 PM)
quick reverse back to 0.70 loh.
*
for my situation
when i use BitComet 0.73
i found out that it juz can scan for virus
and some setting aledi gone + no speed improvment

thats why i downgrade back to BitComet 0.70...
till now, 0.70 is the most stable...
Irishcoffee
post Oct 2 2006, 06:15 PM

ilX / Espressivo
*******
Senior Member
2,994 posts

Joined: Jan 2003
From: Behind You
still looking for stable version
linkinpark
post Oct 3 2006, 02:35 AM

Casual
***
Junior Member
454 posts

Joined: Jan 2003
From: KL
Reverse back to used 0.70 , 12hours+ no crash at all. Still 0.70 is the stable 1.
TStan_pang
post Oct 3 2006, 10:05 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
http://checkip.narak.com/

this web is to check what country IP in ur peer list
seen that BitComet cannot identify other country IP...
kenneth87
post Oct 5 2006, 04:20 AM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


My connection are affected too... Drop from 80 - 100kb/sec to 1-3 kb/sec....WTH is goin on????? cry.gif
sniper69
post Oct 5 2006, 06:37 AM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(linkinpark @ Oct 3 2006, 02:35 AM)
Reverse back to used 0.70 , 12hours+ no crash at all. Still 0.70 is the stable 1.
*
yeap...second to that, seems 0.70 is the most stable one...been using rapidly transfer (seeding/leeching) for past 48 hrs...and its good...
super macgyver
post Oct 5 2006, 02:25 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(kenneth87 @ Oct 5 2006, 04:20 AM)
My connection are affected too... Drop from 80 - 100kb/sec to 1-3 kb/sec....WTH is goin on????? cry.gif
*
dun worry, mine situation is same with urs. sweat.gif
kenneth87
post Oct 5 2006, 05:55 PM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


QUOTE(super macgyver @ Oct 5 2006, 02:25 PM)
dun worry, mine situation is same with urs.  sweat.gif
*
haha..... U r from Selayang rite?? As im chasing this thread, got 1 forumer state that he has no prob. And most of the prob occurs in the area around SUBANG..... Im 1 of the victim.... 5kb/sec already consider vry good speed for my bt. Can u imagine 1 whole day, that god damn bt stuck at 1kb/sec ?? U will feel like smashing ur comp when u see that... icon_rolleyes.gif
TStan_pang
post Oct 5 2006, 07:36 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(kenneth87 @ Oct 5 2006, 05:55 PM)
haha..... U r from Selayang rite?? As im chasing this thread, got 1 forumer state that he has no prob. And most of the prob occurs in the area around SUBANG..... Im 1 of the victim.... 5kb/sec already consider vry good speed for my bt. Can u imagine 1 whole day, that god damn bt stuck at 1kb/sec ?? U will feel like smashing ur comp when u see that... icon_rolleyes.gif
*
are you mean im the one that still can dl in bt? unsure.gif

i hv write these before
QUOTE(tan_pang @ Sep 27 2006, 06:01 PM)
my port also close before
but the speed is normal......
so, i dont bother it...

after reformat pc
my bt speed go back to 20+kbps dl liao~~~ biggrin.gif
*
but now, i discover that it is juz becoz of local peers upload file to me only sweat.gif
coz the dl slow back after i reach 90%
maybe that local peer aledi finish dl at that time
and offline aledi...

This post has been edited by tan_pang: Oct 5 2006, 07:37 PM
super macgyver
post Oct 5 2006, 08:56 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 5 2006, 07:36 PM)
are you mean im the one that still can dl in bt? unsure.gif

i hv write these before

but now, i discover that it is juz becoz of local peers upload file to me only sweat.gif
coz the dl slow back after i reach 90%
maybe that local peer aledi finish dl at that time
and offline aledi...
*
wat ur speed now?
SUSRaikkonen
post Oct 7 2006, 03:57 AM

I'll be your ♡ ☠☼ ☂
*******
Senior Member
8,635 posts

Joined: Jun 2006
From: Jeonju/Jeollabuk-do
I was using 0.70..slow.
Now...trying 0.73.

Anyone who's using it, share settings please smile.gif
TStan_pang
post Oct 7 2006, 07:24 AM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 5 2006, 08:56 PM)
wat ur speed now?
*
the speed i see now usually is 2/2 only...

i have a question...
how to make BitComet can work background??
that mean it will not show in windows that it work
even didnt show it quick launch icon...
i really need it!!!
thx notworthy.gif
sniper69
post Oct 7 2006, 11:00 AM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(tan_pang @ Oct 7 2006, 07:24 AM)
the speed i see now usually is 2/2 only...

i have a question...
how to make BitComet can work background??
that mean it will not show in windows that it work
even didnt show it quick launch icon...
i really need it!!!
thx notworthy.gif
*
wat u mean work background, minimized to system tray?
go to Preferences>Appearances...there
TStan_pang
post Oct 7 2006, 03:59 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(sniper69 @ Oct 7 2006, 11:00 AM)
wat u mean work background, minimized to system tray?
go to Preferences>Appearances...there
*
if minimize to system tray
then it still will show quick launch icon...
i mean i want it totally "invisible"...
JavaKom09088
post Oct 7 2006, 04:21 PM

Casual
***
Junior Member
442 posts

Joined: Sep 2006
QUOTE(Raikkonen @ Oct 7 2006, 03:57 AM)
I was using 0.70..slow.
Now...trying 0.73.

Anyone who's using it, share settings please  smile.gif
*
hey dun go and try tat ver cox i just visited the taiwan forum and those people said bit 0.73 got sum problem ~in the previous ver they got 80 - 90 kb/s (they got faster broadband unlike ours 'the only' ' the best' streamyx in malaysia)but after change to 0.73 the speed like hell !! ...tat's wat i saw from the taiwan forum !
SUSRaikkonen
post Oct 7 2006, 04:26 PM

I'll be your ♡ ☠☼ ☂
*******
Senior Member
8,635 posts

Joined: Jun 2006
From: Jeonju/Jeollabuk-do
I've used 0.70 before but slow too.
You guys using streamyx bridge correct?
If we open the firewall (on our dial-up properties)..all sort of crap coming in.
If not, speed slow.
sniper69
post Oct 7 2006, 05:14 PM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(tan_pang @ Oct 7 2006, 03:59 PM)
if minimize to system tray
then it still will show quick launch icon...
i mean i want it totally "invisible"...
*
well, Quick Launch isnt Taskbar isnt System Tray, Quick Launch is those single icon (normally, show desktop, IE etc), Taskbar where those active/inactive application running while System Tray is where our system clock, date and other notification.usually, when i minimized the BitComet, it'll straight went to system tray instead of taskbar, not quick launch wink.gif
SUSRaikkonen
post Oct 7 2006, 05:15 PM

I'll be your ♡ ☠☼ ☂
*******
Senior Member
8,635 posts

Joined: Jun 2006
From: Jeonju/Jeollabuk-do
how does bitcometTracker 0.3 works?
super macgyver
post Oct 7 2006, 05:18 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 7 2006, 07:24 AM)
the speed i see now usually is 2/2 only...

i have a question...
how to make BitComet can work background??
that mean it will not show in windows that it work
even didnt show it quick launch icon...
i really need it!!!
thx notworthy.gif
*
set to advance=>boss key.
sniper69
post Oct 7 2006, 05:23 PM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(super macgyver @ Oct 7 2006, 05:18 PM)
set to advance=>boss key.
*
laugh.gif, tried just now...well it works...rclxms.gif

by default Alt+`, voila, even Alt+Tab oso still can't see i'm on torrent.to view it back, just hit it Alt+` again...
super macgyver
post Oct 7 2006, 06:31 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(sniper69 @ Oct 7 2006, 05:23 PM)
laugh.gif, tried just now...well it works...rclxms.gif

by default Alt+`, voila, even Alt+Tab oso still can't see i'm on torrent.to view it back, just hit it Alt+` again...
*
i thought only tan_pang asking, dun know u also got need it. laugh.gif thumbup.gif
let bt behind our boss. rclxm9.gif
TStan_pang
post Oct 7 2006, 07:58 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 7 2006, 05:18 PM)
set to advance=>boss key.
*
laugh.gif
thx notworthy.gif
becoz my brother always will shut down the bt, thats why i need it
even the bt speed down like that, he can also blame my BitComet!!!
thank you!!! notworthy.gif
super macgyver
post Oct 7 2006, 08:19 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 7 2006, 07:58 PM)
laugh.gif
thx notworthy.gif
becoz my brother always will shut down the bt, thats why i need it
even the bt speed down like that, he can also blame my BitComet!!!
thank you!!! notworthy.gif
*
same goes to my ex-colleague alwiz blamme on my bt make his line slow. mad.gif
TStan_pang
post Oct 7 2006, 08:32 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 7 2006, 08:19 PM)
same goes to my ex-colleague alwiz blamme on my bt make his line slow.  mad.gif
*
if i m not mistaken, the memory usage of the BitComet will just slow down the comp speed only
wont slow down connection speed...seen that there something done by TMNet...
super macgyver
post Oct 8 2006, 01:48 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 7 2006, 08:32 PM)
if i m not mistaken, the memory usage of the BitComet will just slow down the comp speed only
wont slow down connection speed...seen that there something done by TMNet...
*
even vpn is not helping now. cry.gif
Skylinestar
post Oct 8 2006, 10:17 AM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
i've upgrade to bitcomet 0.73.
but the "PAUSE" function was missing.
if i click STOP, is it the same as paused?
how to pause a download?
TStan_pang
post Oct 8 2006, 11:08 AM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Skylinestar @ Oct 8 2006, 10:17 AM)
i've upgrade to bitcomet 0.73.
but the "PAUSE" function was missing.
if i click STOP, is it the same as paused?
how to pause a download?
*
i found that the 'pause' and 'stop' almost same......
but when press stop, need to connect to tracker again
while pause not...
(correct me if im wrong)

i think that v0.73 aledi got many things missing...
many setting and option gone!!!

This post has been edited by tan_pang: Oct 8 2006, 11:08 AM
super macgyver
post Oct 8 2006, 01:02 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 8 2006, 11:08 AM)
i found that the 'pause' and 'stop' almost same......
but when press stop, need to connect to tracker again
while pause not...
(correct me if im wrong)

i think that v0.73 aledi got many things missing...
many setting and option gone!!!
*
no more use new version now.
kenneth87
post Oct 8 2006, 08:57 PM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


QUOTE(tan_pang @ Oct 8 2006, 11:08 AM)
i found that the 'pause' and 'stop' almost same......
but when press stop, need to connect to tracker again
while pause not...
(correct me if im wrong)

i think that v0.73 aledi got many things missing...
many setting and option gone!!!
*
I also prefer using the pause button that embedded in ver 7.0. It rox...

(Jz to share wif u guys)

My bt for this few days, seems increase few percent of speed adi. From 3- 4 kb/s reaches 7-8 kb/s. Although not alot, but still better than the previous 1. How r u guy's bt?? STill the same???
TStan_pang
post Oct 8 2006, 09:23 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(kenneth87 @ Oct 8 2006, 08:57 PM)
I also prefer using the pause button that embedded in  ver 7.0. It rox...

(Jz to share wif u guys)

My bt for this few days, seems increase few percent of speed adi. From 3- 4 kb/s reaches 7-8 kb/s. Although not alot, but still better than the previous 1. How r u guy's bt?? STill the same???
*
i aledi make a proxy connection
can reach 10++ kbps...
kenneth87
post Oct 8 2006, 09:30 PM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


QUOTE(tan_pang @ Oct 8 2006, 09:23 PM)
i aledi make a proxy connection
can reach 10++ kbps...
*
How to do that?? Can teach / show some steps???
TStan_pang
post Oct 8 2006, 09:33 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(kenneth87 @ Oct 8 2006, 09:30 PM)
How to do that?? Can teach / show some steps???
*
http://forum.lowyat.net/index.php?showtopic=350354
try go there, you will get what you need!!!
although the tutorial is for utorrent
but i also made it in BitComet v0.70!!! thumbup.gif
kenneth87
post Oct 8 2006, 10:01 PM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


QUOTE(tan_pang @ Oct 8 2006, 09:33 PM)
http://forum.lowyat.net/index.php?showtopic=350354
try go there, you will get what you need!!!
although the tutorial is for utorrent
but i also made it in BitComet v0.70!!! thumbup.gif
*
Jz did it...seems no difference....haha... anyway.. thx for it.. notworthy.gif
TStan_pang
post Oct 8 2006, 10:13 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(kenneth87 @ Oct 8 2006, 10:01 PM)
Jz did it...seems no difference....haha... anyway.. thx for it.. notworthy.gif
*
no different??
you aledi try the proxy 1 by 1??
if you want to see the effect, you need to wait for 30 minute first...
kenneth87
post Oct 8 2006, 10:21 PM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


QUOTE(tan_pang @ Oct 8 2006, 10:13 PM)
no different??
you aledi try the proxy 1 by 1??
if you want to see the effect, you need to wait for 30 minute first...
*
oooo..icic... then i try few days 1st. Coz jz tried... No difference at all..haha...
super macgyver
post Oct 8 2006, 10:22 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(kenneth87 @ Oct 8 2006, 08:57 PM)
I also prefer using the pause button that embedded in  ver 7.0. It rox...

(Jz to share wif u guys)

My bt for this few days, seems increase few percent of speed adi. From 3- 4 kb/s reaches 7-8 kb/s. Although not alot, but still better than the previous 1. How r u guy's bt?? STill the same???
*
same goes to here, tis afternoon start from 4kbps to 45kbps.
TStan_pang
post Oct 8 2006, 10:37 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 8 2006, 10:22 PM)
same goes to here, tis afternoon start from 4kbps to 45kbps.
*
4kbps to 45kbps!!!!!! shocking.gif shocking.gif
are you sure???
how you can reach that speed??
i now still stuck around 15-20kbps only......
Motorbaby
post Oct 9 2006, 04:48 PM

Look at all my stars!!
*******
Senior Member
2,126 posts

Joined: Jan 2003
i also want to know.

This post has been edited by Motorbaby: Oct 9 2006, 04:48 PM
TStan_pang
post Oct 9 2006, 04:59 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
now dunno what happen
maybe that proxy didnt work anymore...
my speed gone...
back to 1 decimal place transfer speed... cry.gif

when open the BitComet, suddenly the NIS say got virus trying to invade
i hv check the invader ip, it is the proxy ip (the port also same in the proxy settings in my BitComet)...
so, i hv dump that proxy, and try other
but the other are really... shakehead.gif

This post has been edited by tan_pang: Oct 10 2006, 09:14 AM
erickyoko
post Oct 10 2006, 04:33 AM

On my way
****
Senior Member
532 posts

Joined: Dec 2005
After i had insert the proxy,my bitcomet wil freeze for few minutes...izzit normal???
TStan_pang
post Oct 10 2006, 09:13 AM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(erickyoko @ Oct 10 2006, 04:33 AM)
After i had insert the proxy,my bitcomet wil freeze for few minutes...izzit normal???
*
hah??
i think that is abnormal...
try another proxy

if another proxy also like that, then you better use "no proxy"...
or uninstall bitcomet, reinstall again and try

==============================================

now my peer lists initiation all are in "remote"......
really dunno why... can fix it??
the speed now slow like hell...

This post has been edited by tan_pang: Oct 10 2006, 02:59 PM
yelsew
post Oct 10 2006, 05:03 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(tan_pang @ Oct 10 2006, 09:13 AM)
now my peer lists initiation all are in "remote"......
really dunno why... can fix it??
the speed now slow like hell...
*
from what I checked in the web, that's either ur port forwarding not right or ur firewall rules settings got problem...
TStan_pang
post Oct 10 2006, 05:06 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(yelsew @ Oct 10 2006, 05:03 PM)
from what I checked in the web, that's either ur port forwarding not right or ur firewall rules settings got problem...
*
isn't that is for all the initiation all "local" ??
im all "remote" wor~~

is it same???

This post has been edited by tan_pang: Oct 10 2006, 05:07 PM
super macgyver
post Oct 10 2006, 05:14 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 8 2006, 10:37 PM)
4kbps to 45kbps!!!!!! shocking.gif  shocking.gif
are you sure???
how you can reach that speed??
i now still stuck around 15-20kbps only......
*
just reconnect to 218, then tweak the bitcomet setting.
yelsew
post Oct 10 2006, 05:24 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(tan_pang @ Oct 10 2006, 05:06 PM)
isn't that is for all the initiation all "local" ??
im all "remote" wor~~

is it same???
*
if both port forward and firewall rules u have set ok, should hav a mix of remote and local, then only we can get gain of speed as we will have both side instead of just 1 side of local/remote...


QUOTE(super macgyver @ Oct 10 2006, 05:14 PM)
just reconnect to 218, then tweak the bitcomet setting.
*
hmm... my place here (s'wak) never seems to have a chance to connect to 218... always getting 6x. but luckily the speed still ok, max can reach 60K (for 512k) although not that much steady lately...

This post has been edited by yelsew: Oct 10 2006, 05:28 PM
super macgyver
post Oct 10 2006, 05:38 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(yelsew @ Oct 10 2006, 05:24 PM)
if both port forward and firewall rules u have set ok, should hav a mix of remote and local, then only we can get gain of speed as we will have both side instead of just 1 side of local/remote...
hmm... my place here (s'wak) never seems to have a chance to connect to 218... always getting 6x. but luckily the speed still ok, max can reach 60K (for 512k) although not that much steady lately...
*
u got set proxy?



macgyver
yelsew
post Oct 10 2006, 05:41 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 10 2006, 05:38 PM)
u got set proxy?
macgyver
*
nope, I never use any proxy for BT (only using it in IE for sites like rapidshare...)
kenneth87
post Oct 10 2006, 08:20 PM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


2day my bt seems to have some differences. Can reach 24 kb/s +-, but not stable. It speed range from 4 - 24 kb/s.
TStan_pang
post Oct 10 2006, 08:36 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(kenneth87 @ Oct 10 2006, 08:20 PM)
2day my bt seems to have some differences. Can reach 24 kb/s +-, but not stable. It speed range from 4 - 24 kb/s.
*
i notice that when we use proxy
it is juz let us easily to connect to local peer
and thats why we can get high speed...

anyway, this is juz happen to me
coz i use china proxy, but it seen like no speed
after leave it for a few minute, got speed
and i got speed from local peers......
(before i use proxy, i cant connect to local peers......)

need to get confirmation from you all......
aawcy
post Oct 10 2006, 08:45 PM

Getting Started
**
Junior Member
179 posts

Joined: Apr 2005
we cannot expect much since they have did shape and throttle our speed....! i can say this is confirm for sure...they denied! of coz for "their reputation"

u see.....if ten of thousand user download at 1kb to 5kb/s......everyone will experience the same download and upload speed from others....so i think nothing to do with the bitcomment software version...

This post has been edited by aawcy: Oct 10 2006, 08:46 PM
TStan_pang
post Oct 10 2006, 08:54 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(aawcy @ Oct 10 2006, 08:45 PM)
we cannot expect much since they have did shape and throttle our speed....! i can say this is confirm for sure...they denied! of coz for "their reputation"

u see.....if ten of thousand user download at 1kb to 5kb/s......everyone will experience the same download and upload speed from others....so i think nothing to do with the bitcomment software version...
*
haha, if you follow this thread, you will know that we didnt talk about version anymore... sweat.gif
we also talk about traffic shaping that did by tmnet now...
and also some function in BitComet......

the Boss key not bad... icon_idea.gif
kenneth87
post Oct 10 2006, 10:05 PM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


QUOTE(tan_pang @ Oct 10 2006, 08:54 PM)
haha, if you follow this thread, you will know that we didnt talk about version anymore... sweat.gif
we also talk about traffic shaping that did by tmnet now...
and also some function in BitComet......

the Boss key not bad... icon_idea.gif
*
BOSS key?? Ohhh...the 1 which din show up in toolbar??? haha laugh.gif ... Nice name.. "BOSS KEY" Now my speed drop til 1-3 pula... sweat.gif sweat.gif sweat.gif

One more thing...My tracker status, always showing this,

"CONNECTING TRACKER TO SAY START, WAITING FOR RESPOND"

is this normal???? rclxub.gif rclxub.gif rclxub.gif

This post has been edited by kenneth87: Oct 10 2006, 10:07 PM
super macgyver
post Oct 10 2006, 10:50 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 10 2006, 08:54 PM)
haha, if you follow this thread, you will know that we didnt talk about version anymore... sweat.gif
we also talk about traffic shaping that did by tmnet now...
and also some function in BitComet......

the Boss key not bad... icon_idea.gif
*
wat ur speed now?
try do tweaking in bitcomet as it now make my bt more faster 10 times liao.


by macgyver

This post has been edited by super macgyver: Oct 10 2006, 10:52 PM
TStan_pang
post Oct 10 2006, 10:53 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 10 2006, 10:50 PM)
wat ur speed now?
try do tweaking in bitcomet as it now make my bt more faster 10 times liao.
by macgyver
*
what you hv tweak for??
my speed now juz around 7/15 (i limit upload to 15kbps)

what you hv done??
mind to tell us??
super macgyver
post Oct 10 2006, 10:58 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 10 2006, 10:53 PM)
what you hv tweak for??
my speed now juz around 7/15 (i limit upload to 15kbps)

what you hv done??
mind to tell us??
*
i just tweak it by follow from other cn website.
i save it into a txt file for u.


Attached File(s)
Attached File  Boost_BT.zip ( 3.47k ) Number of downloads: 88
TStan_pang
post Oct 10 2006, 11:01 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 10 2006, 10:58 PM)
i just tweak it by follow from other cn website.
i save it into a txt file for u.
*
"The Compressed (zipped) Folder is invalid or corrupted." sweat.gif

please upload again... notworthy.gif
aledi 3 times download also cannot open it...

This post has been edited by tan_pang: Oct 10 2006, 11:02 PM
sniper69
post Oct 10 2006, 11:10 PM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
wave.gif same here...seems corrupted doh.gif

anyway, i used to be at max download speed at 100KBps, but today the maximum download speed increased by 20%...i wonder what i've done before...unsure.gif
TStan_pang
post Oct 10 2006, 11:14 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(sniper69 @ Oct 10 2006, 11:10 PM)
wave.gif same here...seems corrupted doh.gif

anyway, i used to be at max download speed at 100KBps, but today the maximum download speed increased by 20%...i wonder what i've done before...unsure.gif
*
what you said?? blink.gif
ur dl speed has been increase??
very rare to hear ppl say their speed rise up......

my download still slow like hell!!!

tomorrow will try to reset the modem first
then try the speed......
sniper69
post Oct 10 2006, 11:23 PM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(tan_pang @ Oct 10 2006, 11:14 PM)
what you said?? blink.gif
ur dl speed has been increase??
very rare to hear ppl say their speed rise up......

my download still slow like hell!!!

tomorrow will try to reset the modem first
then try the speed......
*
yeap...increased...and i hope it'll last forever....yeah right... what are you expecting from tmnet tongue.gif

» Click to show Spoiler - click again to hide... «


This post has been edited by sniper69: Oct 10 2006, 11:39 PM
kenneth87
post Oct 11 2006, 01:06 AM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


QUOTE(sniper69 @ Oct 10 2006, 11:23 PM)
yeap...increased...and i hope it'll last forever....yeah right... what are you expecting from tmnet tongue.gif

» Click to show Spoiler - click again to hide... «

*
Im so jealous about ur speed.....Ya, super macgyver, try to correct it. I also cant unzip it.

This post has been edited by kenneth87: Oct 11 2006, 01:06 AM
yelsew
post Oct 11 2006, 10:13 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
tat attachment is ok, but passwd protected...
rickysim84
post Oct 11 2006, 01:22 PM

Regular
******
Senior Member
1,106 posts

Joined: Jan 2003
From: Some place where miracle happen..
ya.. i need the password too...
TStan_pang
post Oct 11 2006, 01:45 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(sniper69 @ Oct 10 2006, 11:23 PM)
yeap...increased...and i hope it'll last forever....yeah right... what are you expecting from tmnet tongue.gif

» Click to show Spoiler - click again to hide... «

*
really hope i can get this speed......
even pray to god also useless now... notworthy.gif

QUOTE(rickysim84 @ Oct 11 2006, 01:22 PM)
ya.. i need the password too...
*
when you all downloaded the file
it say need password?? blink.gif
but my situation is "The Compressed (zipped) file is invalid or corrupted"......

it didnt show anything that say need password......

This post has been edited by tan_pang: Oct 11 2006, 01:48 PM
dokidoki
post Oct 11 2006, 02:06 PM

I am not War machine~
*******
Senior Member
4,630 posts

Joined: Jul 2005
From: PJ somewhere~
i lagi cham.....i can go into the zip file but see nothing tongue.gif
TStan_pang
post Oct 11 2006, 03:30 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
now i got another question want to ask...
why i can connect to the same ip twice in the peers list??

got screenshot here...

PS: look at the speed there, DON'T say i hv got back my speed!!!
if you look at the people who contribute most, he is in TMNet ip...

please also note that, the initiation for the 2 same ip is different!!!
what happening?? unsure.gif

This post has been edited by tan_pang: Oct 11 2006, 03:31 PM


Attached thumbnail(s)
Attached Image
yelsew
post Oct 11 2006, 05:15 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(tan_pang @ Oct 11 2006, 01:45 PM)
really hope i can get this speed......
even pray to god also useless now... notworthy.gif
when you all downloaded the file
it say need password?? blink.gif
but my situation is "The Compressed (zipped) file is invalid or corrupted"......

it didnt show anything that say need password......
*
try right click on it and choose "save target as", that's how I get the file downloaded, but it's encrypted


QUOTE(tan_pang @ Oct 11 2006, 03:30 PM)
now i got another question want to ask...
why i can connect to the same ip twice in the peers list??

got screenshot here...

PS: look at the speed there, DON'T say i hv got back my speed!!!
if you look at the people who contribute most, he is in TMNet ip...

please also note that, the initiation for the 2 same ip is different!!!
what happening?? unsure.gif
*
emm... not sure about that, but I used to get more than 2 same IPs b4... never really care about it tongue.gif

This post has been edited by yelsew: Oct 11 2006, 05:16 PM
yelsew
post Oct 11 2006, 05:17 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
this is my dl speed so far, around 40-47K with 2 files, each less than 5 seeds but around 25-40+ leeches (I limit it to 48K max dl as for convenient surfing - my line is 512k)

user posted image


and the ss of peers for the faster dl file:
user posted image

This post has been edited by yelsew: Oct 11 2006, 05:30 PM
Hornet
post Oct 11 2006, 06:03 PM

What?
*******
Senior Member
4,251 posts

Joined: Jan 2003
From: Malacca, Malaysia, Earth
Want to ask, is there anyway to prevent BC from connecting to DHT nodes. My line/router or whatever it is, will reset each time it connects to DHT nodes

I disable using DHT but it still connects each time i start BC...

Any way to do so? thanks
TStan_pang
post Oct 11 2006, 06:14 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(yelsew @ Oct 11 2006, 05:15 PM)
try right click on it and choose "save target as", that's how I get the file downloaded, but it's encrypted
emm... not sure about that, but I used to get more than 2 same IPs b4... never really care about it  tongue.gif
*
about the first reply...it still same...show again invalid or corrupted...
the 2nd reply make me feel surprise!!! blink.gif
how can get more than 2 that same ip??
how about the initiation??
all same or not?
QUOTE(Hornet @ Oct 11 2006, 06:03 PM)
Want to ask, is there anyway to prevent BC from connecting to DHT nodes. My line/router or whatever it is, will reset each time it connects to DHT nodes

I disable using DHT but it still connects each time i start BC...

Any way to do so? thanks
*
did you mean every time when you open BitComet, the Settings in Preferences always show it is connected??

if like that, you can go to BC folder, then look at the "BitComet.xml" file
make sure that it is not "Read-only"...

This post has been edited by tan_pang: Oct 11 2006, 06:17 PM
yelsew
post Oct 11 2006, 06:29 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
What about this? I attach the same file I downloaded.
TStan_pang
post Oct 11 2006, 06:49 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(yelsew @ Oct 11 2006, 06:29 PM)
What about this? I attach the same file I downloaded.
*
same... cry.gif
need super macgyver to upload the file again......
or maybe it is better if he send via msn... tongue.gif
Hornet
post Oct 11 2006, 08:21 PM

What?
*******
Senior Member
4,251 posts

Joined: Jan 2003
From: Malacca, Malaysia, Earth
QUOTE(tan_pang @ Oct 11 2006, 06:14 PM)
did you mean every time when you open BitComet, the Settings in Preferences always show it is connected??

if like that, you can go to BC folder, then look at the "BitComet.xml" file
make sure that it is not "Read-only"...
*
No, actually in the preference there it is disable for option "use DHT for backup tracker" or something like tht

But if u see at the BC window bottom, they got show DHT connected to how many nodes rite. Its those nodes I want to disable. meaning, make it dont connect to any DHT nodes at all..... and ya, somehow even when i didnt use DHT, those nodes still connect, which causes dc to my line.. so wondering if there's any way to force it dont connect to DHT at all...

thanks again biggrin.gif
yelsew
post Oct 11 2006, 09:25 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(Hornet @ Oct 11 2006, 08:21 PM)
No, actually in the preference there it is disable for option "use DHT for backup tracker" or something like tht

But if u see at the BC window bottom, they got show DHT connected to how many nodes rite. Its those nodes I want to disable. meaning, make it dont connect to any DHT nodes at all..... and ya, somehow even when i didnt use DHT, those nodes still connect, which causes dc to my line.. so wondering if there's any way to force it dont connect to DHT at all...

thanks again biggrin.gif
*
if u r using BitComet 0.70, there are another 2 ways of disabling DHT:

1. Preferences... Advanced... Connection... (Uncheck the box infront of) "Enable DHT Network"
user posted image

2. Right click on the task/torrent (when it's in stop/paused state) then click on Properties... Advanced... (Uncheck the box infront of) "Enable Public DHT Network"
user posted image

try check those 2 settings then see how smile.gif

TStan_pang
post Oct 11 2006, 09:35 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Hornet @ Oct 11 2006, 08:21 PM)
No, actually in the preference there it is disable for option "use DHT for backup tracker" or something like tht

But if u see at the BC window bottom, they got show DHT connected to how many nodes rite. Its those nodes I want to disable. meaning, make it dont connect to any DHT nodes at all..... and ya, somehow even when i didnt use DHT, those nodes still connect, which causes dc to my line.. so wondering if there's any way to force it dont connect to DHT at all...

thanks again biggrin.gif
*
after do what the yelsew teach
you hv to restart the BitComet

else, if will not take effect...
h9s9h
post Oct 11 2006, 11:11 PM

New Member
*
Junior Member
43 posts

Joined: Jun 2006
From: Sarawak, Malaysia
QUOTE(yelsew @ Oct 11 2006, 09:25 PM)
if u r using BitComet 0.70, there are another 2 ways of disabling DHT:

1. Preferences... Advanced... Connection... (Uncheck the box infront of) "Enable DHT Network"
user posted image

2. Right click on the task/torrent (when it's in stop/paused state) then click on Properties... Advanced... (Uncheck the box infront of) "Enable Public DHT Network"
user posted image

try check those 2 settings then see how  smile.gif
*
mind telling me how this DHT network will infect the download speed? thanks.
TStan_pang
post Oct 11 2006, 11:47 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(h9s9h @ Oct 11 2006, 11:11 PM)
mind telling me how this DHT network will infect the download speed? thanks.
*
although DHT can help you to get more bandwidth...

QUOTE
......they took advantage of increased bandwidth and hard disk capacity to provide a file sharing service.......

Extract from: http://en.wikipedia.org/wiki/Distributed_hash_table


and sometime help you find more peer to increase the download speed...

but it may took up too much bandwidth...
and may cause some people hv connection problem...like surfing and online gaming...
therefore, if you experience any disconnection or lag spike while open bt with DHT, you are better to turn it off
yelsew
post Oct 12 2006, 08:29 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
As some old model routers can't handle too many simultaneous connections, which may lead to connection blocked (totally no connections allowed thru until some of them d/c out of too long idle time)... that's what happened to me last time when I was using DLink DSL-500G >.<
super macgyver
post Oct 12 2006, 06:38 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(yelsew @ Oct 11 2006, 10:13 AM)
tat attachment is ok, but passwd protected...
*
QUOTE(rickysim84 @ Oct 11 2006, 01:22 PM)
ya.. i need the password too...
*
password is my msn lah,aiks.

super_macgyver@hotmail.com
yelsew
post Oct 13 2006, 10:06 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 12 2006, 06:38 PM)
password is my msn lah,aiks.

super_macgyver@hotmail.com
*
ooo... I tried with ur nick and so on but didn't thought of ur msn tongue.gif

I have read the file, it's just another personal bitcomet settings experience (still need adjustment to fit our own need), but worth a read, at least more experience sharing smile.gif
sniper69
post Oct 13 2006, 10:20 AM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
laugh.gif, downloaded the file but i can't read...is it chinese? wink.gif doh.gif
yelsew
post Oct 13 2006, 11:54 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(sniper69 @ Oct 13 2006, 10:20 AM)
laugh.gif, downloaded the file but i can't read...is it chinese? wink.gif doh.gif
*
oops, yea... it's in chinese sweat.gif

he got mentioned he quote the content from some CN websites... smile.gif
SUSRaikkonen
post Oct 13 2006, 02:22 PM

I'll be your ♡ ☠☼ ☂
*******
Senior Member
8,635 posts

Joined: Jun 2006
From: Jeonju/Jeollabuk-do
QUOTE(yelsew @ Oct 13 2006, 11:54 AM)
oops, yea... it's in chinese  sweat.gif

he got mentioned he quote the content from some CN websites...  smile.gif
*
then how? sweat.gif
TStan_pang
post Oct 13 2006, 07:30 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
i got the file from super macgyver via msn
he tell me open it with IE, and encode to Chinese Simplified
and then, i hv no problem to read the file...

after open the file
it surprise me...coz i read this article before!!
before i use bt... sweat.gif
therefore, i know this settings maybe didnt help alot
but anyway, thx to super macgyver... notworthy.gif

This post has been edited by tan_pang: Oct 13 2006, 07:31 PM
yelsew
post Oct 14 2006, 09:25 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(Raikkonen @ Oct 13 2006, 02:22 PM)
then how?  sweat.gif
*
if u can't read chinese just del it, no big deal anyway tongue.gif
there is a guide on http://forums.bitcomet.com, u can go take a look if u want smile.gif


QUOTE(tan_pang @ Oct 13 2006, 07:30 PM)
i got the file from super macgyver via msn
he tell me open it with IE, and encode to Chinese Simplified
and then, i hv no problem to read the file...

after open the file
it surprise me...coz i read this article before!!
before i use bt... sweat.gif
therefore, i know this settings maybe didnt help alot
but anyway, thx to super macgyver... notworthy.gif
*
yea, actually most of the guides available on the web stays there for quite sometime already... most of them referring to older version like 0.56~0.60
momuchi
post Oct 14 2006, 11:12 PM

Regular
******
Senior Member
1,065 posts

Joined: Jan 2003
From: Born in Kedah, Now @Putrajaya
i got 20 to 50kbs with new bitcomet ver 0.74
before this i only got below 10kbs with ver 0.63
TStan_pang
post Oct 15 2006, 09:41 AM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(momuchi @ Oct 14 2006, 11:12 PM)
i got 20 to 50kbs with new bitcomet ver 0.74
before this i only got below 10kbs with ver 0.63
*
i now trying BitComet 0.74...
found that the Peer List there got more detail
last time i see the Peer DL there got no number
but now, i can see clearly!!! rclxms.gif

dunno is my comp problem or not
when open the 0.74 version, the comp will lag...
dunno you all got this problem or not...

for my case, the speed didnt improve
and, no "proxy" option anymore...... shakehead.gif

This post has been edited by tan_pang: Oct 15 2006, 10:08 AM
KilJim
post Oct 15 2006, 11:23 AM

^-_-^ ZzzZzZzZzzz....
Group Icon
Elite
4,424 posts

Joined: Jan 2003
From: Singapore
Where did u guys download version 0.74 from?
The link to download.com from bitcomet.com is for 0.73 sweat.gif
Skylinestar
post Oct 15 2006, 12:02 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
why my download percentage getting less and less?

yesterday waas 16.8%
this morniing was 15.5%
now, 15.1%.

using bitcomet 0.73

This post has been edited by Skylinestar: Oct 15 2006, 12:08 PM
Xiaodu
post Oct 15 2006, 01:45 PM

Getting Started
**
Junior Member
116 posts

Joined: Aug 2005
so now the new 0.74 is better now ???

anybody try it ?
fariz
post Oct 15 2006, 02:10 PM

Tan Sri F
Group Icon
VIP
16,825 posts

Joined: Jan 2003
From: Siberia
QUOTE(KilJim @ Oct 15 2006, 11:23 AM)
Where did u guys download version 0.74 from?
The link to download.com from bitcomet.com is for 0.73  sweat.gif
*
http://www.bitcomet.com/doc/download-achive.htm
yelsew
post Oct 15 2006, 03:36 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(tan_pang @ Oct 15 2006, 09:41 AM)
i now trying BitComet 0.74...
found that the Peer List there got more detail
last time i see the Peer DL there got no number
but now, i can see clearly!!! rclxms.gif

dunno is my comp problem or not
when open the 0.74 version, the comp will lag...
dunno you all got this problem or not...

for my case, the speed didnt improve
and, no "proxy" option anymore...... shakehead.gif
*
QUOTE(KilJim @ Oct 15 2006, 11:23 AM)
Where did u guys download version 0.74 from?
The link to download.com from bitcomet.com is for 0.73  sweat.gif
*
QUOTE(Skylinestar @ Oct 15 2006, 12:02 PM)
why my download percentage getting less and less?

yesterday waas 16.8%
this morniing was 15.5%
now, 15.1%.

using bitcomet 0.73
*
QUOTE(Xiaodu @ Oct 15 2006, 01:45 PM)
so now the new 0.74 is better now ???

anybody try it ?
*
there are still ppl complaining at bitcomet forum about bugs/problems with version 0.73/0.74... so... now still not the time for upgrading to new version for bitcomet sweat.gif
TStan_pang
post Oct 15 2006, 04:35 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(yelsew @ Oct 15 2006, 03:36 PM)
there are still ppl complaining at bitcomet forum about bugs/problems with version 0.73/0.74... so... now still not the time for upgrading to new version for bitcomet  sweat.gif
*
v0.74 can say as stable for now
but still need a few more try...

after a few more try, if i discover that no speed improvment
then i will downgrade back to v0.70...
becoz more option in v0.70...
telford
post Oct 15 2006, 05:17 PM

New Member
*
Junior Member
5 posts

Joined: Dec 2005
i'm using the bitcomet to download movie!!! but everysince my housemate adjust port setting in the comet evrything in my pc went slow!!!but for his pc!! the thing he downloaded can be completed within minute!!! help me please!!!
kb2005
post Oct 15 2006, 05:41 PM

Yahoo!
********
All Stars
17,846 posts

Joined: Jan 2005
You need to attach your bitcomet setting here. Pls snapshot your bit comet setting so that we can help.
kenneth87
post Oct 16 2006, 11:12 AM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


QUOTE(telford @ Oct 15 2006, 05:17 PM)
i'm using the bitcomet to download movie!!! but everysince my housemate adjust port setting in the comet evrything in my pc went slow!!!but for his pc!! the thing he downloaded can be completed within minute!!! help me please!!!
*
Complete within a min??? WTH??? shocking.gif shocking.gif shocking.gif shocking.gif R u sure??? How big is that file that he dl??? WIthin a min??
kenneth87
post Oct 16 2006, 11:12 AM

~~"\(0.0)/"~~
*****
Senior Member
956 posts

Joined: May 2006
From: Wichita / US


-Double post due to bad connection-

This post has been edited by kenneth87: Oct 16 2006, 11:13 AM
TStan_pang
post Oct 16 2006, 01:37 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(kenneth87 @ Oct 16 2006, 11:12 AM)
Complete within a min??? WTH???  shocking.gif  shocking.gif  shocking.gif  shocking.gif  R u sure??? How big is that file that he dl??? WIthin a min??
*
i think he is trying to say "download with very high speed"... sweat.gif
back to his problem...can telford try using the same port no. in his fren comp??

if cant, then try port-forward like the http://www.portforward.com/ teach...
port-forward with ur BitComet listening port...
super macgyver
post Oct 17 2006, 03:24 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 13 2006, 07:30 PM)
i got the file from super macgyver via msn
he tell me open it with IE, and encode to Chinese Simplified
and then, i hv no problem to read the file...

after open the file
it surprise me...coz i read this article before!!
before i use bt... sweat.gif
therefore, i know this settings maybe didnt help alot
but anyway, thx to super macgyver... notworthy.gif
*
but it did improve very much on my bt as tis 1 is the thread strater had suggest sum his own experience on his adsl setting with his bt 0.70. thumbup.gif
yelsew
post Oct 18 2006, 08:14 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
wonder when can get a really stable version upgrade...
TStan_pang
post Oct 18 2006, 08:26 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(yelsew @ Oct 18 2006, 08:14 AM)
wonder when can get a really stable version upgrade...
*
juz now use v0.74 try to download something
i can connect to many peers (including local peers)
but strange that, the download didnt start!!!
it juz like i hv connect to them, but didnt receive anything from them
even there no no. show in DL/UL...
when check in "Summury" i.......
receive 0kbps from 0 peers
upload 0 kbps to 0 peers...

when look at this situation, with no doubt, i change it back to older version...

dunno why, it can connect to peers
but get nothing!!!

downgrade back to 0.63, can connect to many local and get high download speed!! thumbup.gif
but that v0.74... shakehead.gif
yelsew
post Oct 19 2006, 10:54 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(tan_pang @ Oct 18 2006, 08:26 PM)
juz now use v0.74 try to download something
i can connect to many peers (including local peers)
but strange that, the download didnt start!!!
it juz like i hv connect to them, but didnt receive anything from them
even there no no. show in DL/UL...
when check in "Summury" i.......
receive 0kbps from 0 peers
upload 0 kbps to 0 peers...

when look at this situation, with no doubt, i change it back to older version...

dunno why, it can connect to peers
but get nothing!!!

downgrade back to 0.63, can connect to many local and get high download speed!! thumbup.gif
but that v0.74... shakehead.gif
*
That's y for now I only check with BC forum 1st on ppl's comment on the new release... still using 0.70 for me and the speed is back to normal with steady 50K+ rclxms.gif
avengers88
post Oct 20 2006, 09:31 PM

Whatever man
******
Senior Member
1,615 posts

Joined: May 2005
i got a problem .. i can't download . dunno why . i m trying to download , mike portnoy . but it just won't move .. wait so long its still at 0% .
TStan_pang
post Oct 20 2006, 09:59 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(avengers88 @ Oct 20 2006, 09:31 PM)
i got a problem .. i can't download . dunno why . i m trying to download , mike portnoy . but it just won't move .. wait so long its still at 0% .
*
what version you are using??
if you use 0.74, then downgrade it back

it is the same problem as mine......
QUOTE(tan_pang @ Oct 18 2006, 08:26 PM)
juz now use v0.74 try to download something
i can connect to many peers (including local peers)
but strange that, the download didnt start!!!
it juz like i hv connect to them, but didnt receive anything from them
even there no no. show in DL/UL...
when check in "Summury" i.......
receive 0kbps from 0 peers
upload 0 kbps to 0 peers...

when look at this situation, with no doubt, i change it back to older version...

dunno why, it can connect to peers
but get nothing!!!

downgrade back to 0.63, can connect to many local and get high download speed!! thumbup.gif
but that v0.74... shakehead.gif
*
This post has been edited by tan_pang: Oct 20 2006, 10:00 PM
Skylinestar
post Oct 20 2006, 10:27 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
i'm using bitcomet 0.73. currently, there's still one file downloading.
can i install version 0.70 over it without uninstalling 0.73?
will the file be continued?
TStan_pang
post Oct 20 2006, 10:41 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Skylinestar @ Oct 20 2006, 10:27 PM)
i'm using bitcomet 0.73. currently, there's still one file downloading.
can i install version 0.70 over it without uninstalling 0.73?
will the file be continued?
*
the downloaded or downloading file will remain in ur hdd
you can uninstall BC or reinstall it with other version
no problem
and the task can continue!! icon_rolleyes.gif

This post has been edited by tan_pang: Oct 20 2006, 10:43 PM
Skylinestar
post Oct 20 2006, 11:18 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
this window pop up automatically.
do u guys suffer that?
TStan_pang
post Oct 20 2006, 11:25 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Skylinestar @ Oct 20 2006, 11:18 PM)
this window pop up automatically.
do u guys suffer that?
*
when it popup??
always??

i didnt experience it before
Skylinestar
post Oct 21 2006, 12:15 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
QUOTE(tan_pang @ Oct 20 2006, 11:25 PM)
when it popup??
always??

i didnt experience it before
*
my bitcomet is always running.
sometimes when i online, the folder will pop up. maybe once a day. dunno why. i already have all the necessary video codecs installed in my opc.

This post has been edited by Skylinestar: Oct 21 2006, 12:15 PM
TStan_pang
post Oct 21 2006, 11:58 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Skylinestar @ Oct 21 2006, 12:15 PM)
my bitcomet is always running.
sometimes when i online, the folder will pop up. maybe once a day. dunno why. i already have all the necessary video codecs installed in my opc.
*
i dunno how to solve your problem
but you can try uninstall it
and then reinstall...

when unishtall, make sure all file of BitComet deleted...
super macgyver
post Oct 21 2006, 11:59 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(Skylinestar @ Oct 21 2006, 12:15 PM)
my bitcomet is always running.
sometimes when i online, the folder will pop up. maybe once a day. dunno why. i already have all the necessary video codecs installed in my opc.
*
Did u try to set it once finish dl will auto open directory?
Darkmage12
post Oct 22 2006, 12:22 AM

shhhhhhhhh come i tell you something hehe
********
All Stars
17,053 posts

Joined: Jan 2003
hey my bitcomet use almost 200mb of ram when running how come ah?
Skylinestar
post Oct 22 2006, 02:49 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
QUOTE(super macgyver @ Oct 21 2006, 11:59 PM)
Did u try to set it once finish dl will auto open directory?
*
no. no finish download too. it just open the codec wizard folder only. dunno why.
yelsew
post Oct 23 2006, 09:21 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(Darkmage12 @ Oct 22 2006, 12:22 AM)
hey my bitcomet use almost 200mb of ram when running how come ah?
*
it's normal if u r downloading many tasks at 1 time or connecting to many peers
reeyon
post Oct 23 2006, 06:45 PM

On my way
****
Senior Member
692 posts

Joined: Dec 2004
From: Johor Bahru
QUOTE(Darkmage12 @ Oct 22 2006, 12:22 AM)
hey my bitcomet use almost 200mb of ram when running how come ah?
*
if not happy ,can switch to utorrent... icon_rolleyes.gif
super macgyver
post Oct 23 2006, 07:10 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(reeyon @ Oct 23 2006, 06:45 PM)
if not happy ,can switch to utorrent...  icon_rolleyes.gif
*
utorrent dun move after installed into my system. sweat.gif
Skylinestar
post Oct 23 2006, 07:18 PM

Mega Duck
********
All Stars
10,467 posts

Joined: Jan 2003
From: Sarawak
is there any settings that i have to change in bitcomet if i install a software firewall like Comodo?
reeyon
post Oct 23 2006, 07:23 PM

On my way
****
Senior Member
692 posts

Joined: Dec 2004
From: Johor Bahru
QUOTE(Skylinestar @ Oct 23 2006, 07:18 PM)
is there any settings that i have to change in bitcomet if i install a software firewall like Comodo?
*
need permission and ports in Comodo i think so.
TStan_pang
post Oct 23 2006, 07:29 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Skylinestar @ Oct 23 2006, 07:18 PM)
is there any settings that i have to change in bitcomet if i install a software firewall like Comodo?
*
watever firewall you install
you also need to make it can go through that firewall

giving permission for BitComet to go through

This post has been edited by tan_pang: Oct 23 2006, 07:30 PM
super macgyver
post Oct 23 2006, 07:44 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(Skylinestar @ Oct 23 2006, 07:18 PM)
is there any settings that i have to change in bitcomet if i install a software firewall like Comodo?
*
just set allow is enough.
Darkmage12
post Oct 23 2006, 08:04 PM

shhhhhhhhh come i tell you something hehe
********
All Stars
17,053 posts

Joined: Jan 2003
set allow? you mean at windows firewall?
yelsew
post Oct 24 2006, 09:39 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(Skylinestar @ Oct 23 2006, 07:18 PM)
is there any settings that i have to change in bitcomet if i install a software firewall like Comodo?
*
nope, there is no setting at BC then u need to change (in fact all settings in BC doesn't have anything to do with watever firewall u using, it's mainly about connections and tasks). But u need to set allow in Comodo for BC.


QUOTE(Darkmage12 @ Oct 23 2006, 08:04 PM)
set allow? you mean at windows firewall?
*
for windows firewall, u need to add BC to the exception.

This post has been edited by yelsew: Oct 24 2006, 09:43 AM
super macgyver
post Oct 24 2006, 12:50 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(Darkmage12 @ Oct 23 2006, 08:04 PM)
set allow? you mean at windows firewall?
*
i mean for his comodo fw lah.
calvin_gsc
post Oct 24 2006, 02:47 PM

10k Club
********
All Stars
10,261 posts

Joined: Jan 2003
I have already forwarded my port.

However, if I let me bitcomet running to download things, I couldn't surf the web. How come?
reeyon
post Oct 24 2006, 02:58 PM

On my way
****
Senior Member
692 posts

Joined: Dec 2004
From: Johor Bahru
QUOTE(calvin_gsc @ Oct 24 2006, 02:47 PM)
I have already forwarded my port.

However, if I let me bitcomet running to download things, I couldn't surf the web. How come?
*
limit ur bitcomet upload speed at 80% of your exact upload speed.

512kb/s /8 = 64kb/s (actually i get max 40-48kb/s from speedometer)

then use 40kb/s x 80% = 32kb/s as ur bitcomet upload speed.

if still cannot surf net, then uninstall the firewall. i hate it.
TStan_pang
post Oct 24 2006, 04:34 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(reeyon @ Oct 24 2006, 02:58 PM)
limit ur bitcomet upload speed at 80% of your exact upload speed.

512kb/s /8 = 64kb/s (actually i get max 40-48kb/s from speedometer)

then use 40kb/s x 80% = 32kb/s as ur bitcomet upload speed.

if still cannot surf net, then uninstall the firewall. i hate it.
*
that 512kbps is download speed... sweat.gif
if you subscribe to 512k package
ur upload is 256kbps
then ur limit should be 256/8 = 32kbps
32 x 80% = 25.6kbps
then ur upload limit should be less than 25kbps

if you subscribe to 1M package, then you should limit to 38kbps

since that tmnet didnt provide us 100% speed, you should set to lower upload speed...
512k > 22kbps
1M > 32kbps

if limit upload speed didnt solve your problem, you can lower Max half-open TCP connections that can found in
Preferences > Advanced > Connection
you can set to 8 (default is 10)

if you still experience the same problem again
then you can disable the DHT
and restart the BitComet again


hope this 3 way can help calvin_gsc

This post has been edited by tan_pang: Oct 24 2006, 04:36 PM
super macgyver
post Oct 24 2006, 07:21 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 24 2006, 04:34 PM)
that 512kbps is download speed... sweat.gif
if you subscribe to 512k package
ur upload is 256kbps
then ur limit should be 256/8 = 32kbps
32 x 80% = 25.6kbps
then ur upload limit should be less than 25kbps

if you subscribe to 1M package, then you should limit to 38kbps

since that tmnet didnt provide us 100% speed, you should set to lower upload speed...
512k > 22kbps
1M > 32kbps

if limit upload speed didnt solve your problem, you can lower Max half-open TCP connections that can found in
Preferences > Advanced > Connection
you can set to 8 (default is 10)

if you still experience the same problem again
then you can disable the DHT
and restart the BitComet again
hope this 3 way can help calvin_gsc
*
u also set like tat? tongue.gif rclxms.gif
calvin_gsc
post Oct 24 2006, 07:48 PM

10k Club
********
All Stars
10,261 posts

Joined: Jan 2003
QUOTE(reeyon @ Oct 24 2006, 02:58 PM)
limit ur bitcomet upload speed at 80% of your exact upload speed.

512kb/s /8 = 64kb/s (actually i get max 40-48kb/s from speedometer)

then use 40kb/s x 80% = 32kb/s as ur bitcomet upload speed.

if still cannot surf net, then uninstall the firewall. i hate it.
*
QUOTE(tan_pang @ Oct 24 2006, 04:34 PM)
that 512kbps is download speed... sweat.gif
if you subscribe to 512k package
ur upload is 256kbps
then ur limit should be 256/8 = 32kbps
32 x 80% = 25.6kbps
then ur upload limit should be less than 25kbps

if you subscribe to 1M package, then you should limit to 38kbps

since that tmnet didnt provide us 100% speed, you should set to lower upload speed...
512k > 22kbps
1M > 32kbps

if limit upload speed didnt solve your problem, you can lower Max half-open TCP connections that can found in
Preferences > Advanced > Connection
you can set to 8 (default is 10)

if you still experience the same problem again
then you can disable the DHT
and restart the BitComet again
hope this 3 way can help calvin_gsc
*
Thanks guys for the suggestion. Will try it out.

The global download rate, I remain it as no limit?

Update: I have a 1Mbit connection. Applied the settings, and surfing lowyat always gives me timeouts if bitcomet is running.

This post has been edited by calvin_gsc: Oct 24 2006, 07:59 PM
Notoriez
post Oct 24 2006, 11:04 PM

I am Notty and Notorious !!!
*******
Senior Member
2,499 posts

Joined: Apr 2005
From: Tyneside
Guys, i needed some help biggrin.gif

I have formatted my PC. B4 i format, there are some few files that still incomplete..when i install back my BitComet and set the download directory to the incomplete files but there's no effect (resume)..can someone help me to resume those downloads?? Some of it already 90% downloaded sad.gif
TStan_pang
post Oct 24 2006, 11:25 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 24 2006, 07:21 PM)
u also set like tat? tongue.gif rclxms.gif
*
i didnt have that kind of problem
and some people in this forum say that some of the old model modem cannot handle too much task in same time
therefore, cant surf when BitComet open......

if after try those setting also cant work
then calvin_gsc can try a newer modem

This post has been edited by tan_pang: Oct 24 2006, 11:26 PM
cheese86
post Oct 25 2006, 12:24 AM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
QUOTE(tan_pang @ Oct 24 2006, 04:34 PM)
that 512kbps is download speed... sweat.gif
if you subscribe to 512k package
ur upload is 256kbps
then ur limit should be 256/8 = 32kbps
32 x 80% = 25.6kbps
then ur upload limit should be less than 25kbps

if you subscribe to 1M package, then you should limit to 38kbps

since that tmnet didnt provide us 100% speed, you should set to lower upload speed...
512k > 22kbps
1M > 32kbps

*
for 512k package
set upload to 15,if you set aorund 22k..your download will get affected.
i have been using upload 15 for the 1 year liao..if tmnet didn't throttle the conenction,the download rate should maintain btw 55k to 60k

for 1M package
se the upload around 30k should be alright
super macgyver
post Oct 25 2006, 12:34 AM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(wengjoe @ Oct 25 2006, 12:24 AM)
for 512k package
set upload to 15,if you set aorund 22k..your download will get affected.
i have been using upload 15 for the 1 year liao..if tmnet didn't throttle the conenction,the download rate should maintain btw 55k to 60k

for 1M package
se the upload around 30k should be alright
*
u mean the global upload speed? wat speed u having now?
cheese86
post Oct 25 2006, 03:02 AM

Enthusiast
*****
Senior Member
790 posts

Joined: Jan 2006
QUOTE(super macgyver @ Oct 25 2006, 12:34 AM)
u mean the global upload speed? wat speed u having now?
*
if you are saying before tmnet throttle the line
my speed is stable at 55k to 60k (depend on certain torrent aslo)

sometime you just have to tweak here and there and see which outcome suit your system,but global upload set at 15k for 512k package should be just nice.
yelsew
post Oct 25 2006, 08:49 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(calvin_gsc @ Oct 24 2006, 07:48 PM)
Thanks guys for the suggestion. Will try it out.

The global download rate, I remain it as no limit?

Update: I have a 1Mbit connection. Applied the settings, and surfing lowyat always gives me timeouts if bitcomet is running.
*
other that limit ur upload rate, what is the tcp simultaneous connection u set?? in connection... advance... section of bitcomet, try not to set too high (30% of the total number u set when u applied the tcp patch should b enough already)

another thing u can try is set ur bitcomet to lower cpu priority (it's "normal" for normal, try set it to "below normal" or "low", u can set this at task manager (ctrl+alt+del))
jet_tsen
post Oct 25 2006, 09:57 AM

Getting Started
**
Junior Member
242 posts

Joined: Jan 2003
well...i try to above advise..but still the same for me..i have a problem which downloading veyr slow too..anyone can advise?..previously it work very well for me bitcomet...but after i format my pc and reinstall everything..it become like snails now sad.gif, it still very slow like 1kb or 2 kb eventho alot of seeds...anyone can advise me?
jet_tsen
post Oct 25 2006, 10:35 AM

Getting Started
**
Junior Member
242 posts

Joined: Jan 2003
changed to utorrent..it still the same..1k to 2k..sometime..just 0..eventho alot of seed...arghhhh..help plsss
reeyon
post Oct 25 2006, 03:00 PM

On my way
****
Senior Member
692 posts

Joined: Dec 2004
From: Johor Bahru
QUOTE(jet_tsen @ Oct 25 2006, 10:35 AM)
changed to utorrent..it still the same..1k to 2k..sometime..just 0..eventho alot of seed...arghhhh..help plsss
*
utorrent have to wait about 5 or 8 minutes to boost up the speed when u started the torrents.

Please set this:

Global Connection: 200-250
Connection per torrent : 100-120 (my setting)
upload speed: 32kb/s (if urs 1M package)
upload slots: 4 or 5
net.max_halfopen : let it default value of 8.

Protocol Encryption: set it to Forced.

and test if ur port forwarding correctly or not http://www.utorrrent.com/testport.php?port=xxxxxx (xxxxxx means ur port)
TStan_pang
post Oct 25 2006, 07:36 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(jet_tsen @ Oct 25 2006, 09:57 AM)
well...i try to above advise..but still the same for me..i have a problem which downloading veyr slow too..anyone can advise?..previously it work very well for me bitcomet...but after i format my pc and reinstall everything..it become like snails now sad.gif, it still very slow like 1kb or 2 kb eventho alot of seeds...anyone can advise me?
*
QUOTE(jet_tsen @ Oct 25 2006, 10:35 AM)
changed to utorrent..it still the same..1k to 2k..sometime..just 0..eventho alot of seed...arghhhh..help plsss
*
if can, please don double post next time
you are throttle
juz like many of us in here

the slow download issue aledi discuss long time in here

change to utorrent will not solve the problem becoz both BitComet and utorrent are also using the same concept...

This post has been edited by tan_pang: Oct 25 2006, 07:36 PM
super macgyver
post Oct 27 2006, 06:26 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
happy the throttled period is over liao 2 week ago. ^o^
TStan_pang
post Oct 27 2006, 07:48 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(super macgyver @ Oct 27 2006, 06:26 PM)
happy the throttled period is over liao 2 week ago. ^o^
*
im not only still in throttle
but also cant connect!!!

when connect, always 678 or 676
juz can try my luck in routing mode
but juz for temporary connection...always got problem
hope tomorrow not only can connect, but also unthrottle

try BitComet 0.75 juz now
maybe is my connection problem
my download didnt move at all
super macgyver
post Oct 27 2006, 11:24 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(tan_pang @ Oct 27 2006, 07:48 PM)
im not only still in throttle
but also cant connect!!!

when connect, always 678 or 676
juz can try my luck in routing mode
but juz for temporary connection...always got problem
hope tomorrow not only can connect, but also unthrottle

try BitComet 0.75 juz now
maybe is my connection problem
my download didnt move at all
*
use 0.70 coz it is stable version, damn fast, around 55kbps. icon_rolleyes.gif
nckent
post Oct 28 2006, 08:45 AM

||>e-M'si@n<||
****
Senior Member
676 posts

Joined: Feb 2006
From: Petaling Jaya
QUOTE(super macgyver @ Oct 27 2006, 11:24 PM)
use 0.70 coz it is stable version, damn fast, around 55kbps.  icon_rolleyes.gif
*
me too! using version 0.70 n my dl speed is 50+kb/s wif streamyx 512kbps package laugh.gif
TStan_pang
post Oct 28 2006, 09:17 AM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(nckent @ Oct 28 2006, 08:45 AM)
me too! using version 0.70 n my dl speed is 50+kb/s wif streamyx 512kbps package laugh.gif
*
so you all aledi unthrottle?? unsure.gif
i think i also unthrottle juz now

coz i can get around 40kbps start from 12am rclxm9.gif
version using is v0.70

later try 0.75, and will also try its http download too!!
jet_tsen
post Oct 28 2006, 01:15 PM

Getting Started
**
Junior Member
242 posts

Joined: Jan 2003
lucky u all..me still throttle..still the same..speed never more then 10k..eventho alot of seeds..arghh..
Darkmage12
post Oct 28 2006, 05:05 PM

shhhhhhhhh come i tell you something hehe
********
All Stars
17,053 posts

Joined: Jan 2003
all still using 0.70? anyone tested 0.75?
super macgyver
post Oct 28 2006, 06:25 PM

★~13k Spam Club~★
********
All Stars
19,321 posts

Joined: Jan 2003
QUOTE(Darkmage12 @ Oct 28 2006, 05:05 PM)
all still using 0.70? anyone tested 0.75?
*
still beta ler. sweat.gif
TStan_pang
post Oct 29 2006, 07:46 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
start from today, my bt become abnormal again
when open BitComet, the connection speed will turn slow
and then..cant even surf

not like yesterday, which bt 40+kbps + online gaming + surf + chat also no problem
but today, bt 10+kbps, then connection speed go download......

PS: becoz of this damn fark connection, i still dunno how the v0.75 speed
mun88
post Oct 30 2006, 09:59 AM

Enthusiast
*****
Senior Member
845 posts

Joined: Oct 2006
my download speed is from 10-55k....using o.70version
TStan_pang
post Oct 30 2006, 10:06 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
I have try BitComet v0.75 bt download
not bad
at least not like v0.74 that didnt start

but maybe the suck line contribute to 0.74 problem...
now the line no problem, can connect with bridge connection!!!

who aledi try v0.75 http/ftp download function??

This post has been edited by tan_pang: Oct 30 2006, 10:06 PM
mun88
post Oct 31 2006, 09:11 AM

Enthusiast
*****
Senior Member
845 posts

Joined: Oct 2006
QUOTE(tan_pang @ Oct 30 2006, 10:06 PM)
I have try BitComet v0.75 bt download
not bad
at least not like v0.74 that didnt start

but maybe the suck line contribute to 0.74 problem...
now the line no problem, can connect with bridge connection!!!

who aledi try v0.75 http/ftp download function??
*
what is your max download speed??? for v0.75???
i using v0.70 yesterday midnight sometime can get max 90k...
amenlo9
post Oct 31 2006, 10:37 AM

Look at all my stars!!
*******
Senior Member
2,627 posts

Joined: Jan 2003
From: Sepang,Cheras,Jupiter
i only manage to download faster if the torrent got many local users......
TStan_pang
post Oct 31 2006, 02:13 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(mun88 @ Oct 31 2006, 09:11 AM)
what is your max download speed??? for v0.75???
i using v0.70 yesterday midnight sometime can get max 90k...
*
it go up to 40+kbps!!
and you must know that another pc is online gaming and im 512k user biggrin.gif
QUOTE(amenlo9 @ Oct 31 2006, 10:37 AM)
i only manage to download faster if the torrent got many local users......
*
so, you are still in throttle...
isnt all the user should be unthrottle in November??
now aledi Halloween day......

This post has been edited by tan_pang: Oct 31 2006, 02:15 PM
mun88
post Oct 31 2006, 04:56 PM

Enthusiast
*****
Senior Member
845 posts

Joined: Oct 2006
[quote=tan_pang,Oct 31 2006, 02:13 PM]
it go up to 40+kbps!!
and you must know that another pc is online gaming and im 512k user biggrin.gif

may i know have u do any port forward? or do patcher to open connection limit?
my download speed not steady from 10+ to sometime 90+k ,up and down speed..
TStan_pang
post Oct 31 2006, 08:51 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(mun88 @ Oct 31 2006, 04:56 PM)
may i know have u do any port forward? or do patcher to open connection limit?
my download speed not steady from 10+ to sometime 90+k ,up and down speed..
*
i didnt do any port forward and download any patcher
coz my modem (Riger DB102) aledi allow all type of connection...
didnt need to open port again

my fren also experience the same problem
he also sometimes 10kbps, but suddenly will boost to 70kbps
and then back to 10kbps...these download speed repeat and repeat again
i feel strange when he say his download speed become like that becoz he is 512k user too
70kbps... unsure.gif

maybe is the line problem
or it also maybe is the BitComet have problem when show you the information
jet_tsen
post Oct 31 2006, 11:45 PM

Getting Started
**
Junior Member
242 posts

Joined: Jan 2003
i do the port forwarder ( some sifu advise )..but the speed still the same ...yes..like wut u guys said..is up and down too..max 40+...then back to less then 10k..
Niuminoid
post Nov 1 2006, 12:55 AM

Casual
***
Junior Member
323 posts

Joined: Jan 2005
From: USJ Subang
Anyone pls help me out with this matter...whenever i run my bitcomet...my cpu usage will hit 100%..even my download isnt running...it still hit 100%. Thanks sad.gif



This post has been edited by Niuminoid: Nov 1 2006, 01:06 AM


Attached thumbnail(s)
Attached Image
yelsew
post Nov 1 2006, 09:03 AM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(Niuminoid @ Nov 1 2006, 12:55 AM)
Anyone pls help me out with this matter...whenever i run my bitcomet...my cpu usage will hit 100%..even my download isnt running...it still hit 100%. Thanks  sad.gif
*
any other program that will cause it also? or just whenever u run bitcomet?

as shown in the snapshot, ur BC didnt take tat resource? blink.gif



EDIT*

I'm testing with BC 0.75, having this prob:
file cant finish dl, even when it says to b finished but after hash check, it's actually still at 99.7%?? It's a bug or I should disable the "hash check again"??

This post has been edited by yelsew: Nov 1 2006, 02:21 PM
TStan_pang
post Nov 1 2006, 03:16 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(yelsew @ Nov 1 2006, 09:03 AM)
any other program that will cause it also? or just whenever u run bitcomet?

as shown in the snapshot, ur BC didnt take tat resource? blink.gif
EDIT*

I'm testing with BC 0.75, having this prob:
file cant finish dl, even when it says to b finished but after hash check, it's actually still at 99.7%?? It's a bug or I should disable the "hash check again"??
*
i also experience this before
after downloaded a video and trying to play it
the video is incomplete...
then i hash check again, it is juz 96.1%

at that time, i think it is becoz im not enable the 'hash check again' option
then i go to enable it
not didnt got that kind of problem...


anyway, who used the 'Chat' function??
in 0.63, i still can chat with other people
but they juz didnt reply me
0.70 didnt found any people that can chat
but 0.75 didnt have the chat function!!!
Niuminoid
post Nov 1 2006, 03:24 PM

Casual
***
Junior Member
323 posts

Joined: Jan 2005
From: USJ Subang
QUOTE(yelsew @ Nov 1 2006, 09:03 AM)
any other program that will cause it also? or just whenever u run bitcomet?

as shown in the snapshot, ur BC didnt take tat resource? blink.gif
EDIT*

I'm testing with BC 0.75, having this prob:
file cant finish dl, even when it says to b finished but after hash check, it's actually still at 99.7%?? It's a bug or I should disable the "hash check again"??
*
Im sure not any other program causes it...after i stop runnin bitcomet and CPU usage will be back to normal.
yelsew
post Nov 1 2006, 04:06 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(tan_pang @ Nov 1 2006, 03:16 PM)
i also experience this before
after downloaded a video and trying to play it
the video is incomplete...
then i hash check again, it is juz 96.1%

at that time, i think it is becoz im not enable the 'hash check again' option
then i go to enable it
not didnt got that kind of problem...
anyway, who used the 'Chat' function??
in 0.63, i still can chat with other people
but they juz didnt reply me
0.70 didnt found any people that can chat
but 0.75 didnt have the chat function!!!
*
may b it's bcos many ppl complaining about the chat function taking too much resources so they might as well remove it tongue.gif

I have installed back 0.70... dont really like the feeling of 0.75, lack of a few features from 0.70, such as backup tracker, upload slots, etc

QUOTE(Niuminoid @ Nov 1 2006, 03:24 PM)
Im sure not any other program causes it...after i stop runnin bitcomet and CPU usage will be back to normal.
*
which version of BC u r using?
Niuminoid
post Nov 1 2006, 04:43 PM

Casual
***
Junior Member
323 posts

Joined: Jan 2005
From: USJ Subang
QUOTE(yelsew @ Nov 1 2006, 04:06 PM)
may b it's bcos many ppl complaining about the chat function taking too much resources so they might as well remove it  tongue.gif

I have installed back 0.70... dont really like the feeling of 0.75, lack of a few features from 0.70, such as backup tracker, upload slots, etc
which version of BC u r using?
*
Im using version 0.75...but previously all the versions also give me the same problem. Any solution?
TStan_pang
post Nov 1 2006, 06:48 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Niuminoid @ Nov 1 2006, 04:43 PM)
Im using version 0.75...but previously all the versions also give me the same problem. Any solution?
*
juz now i have saw my Windows Task Manager
my BitComet use up to 61,xxxk of mem!!!
but the CPU usage is less than 30%...

is it your comp problem??

try reduce the MAX Simultaneous Half-Open TCP Connection in Perferences > Advanced > Connection...
Niuminoid
post Nov 1 2006, 07:09 PM

Casual
***
Junior Member
323 posts

Joined: Jan 2005
From: USJ Subang
QUOTE(tan_pang @ Nov 1 2006, 06:48 PM)
juz now i have saw my Windows Task Manager
my BitComet use up to 61,xxxk of mem!!!
but the CPU usage is less than 30%...

is it your comp problem??

try reduce the MAX Simultaneous Half-Open TCP Connection in Perferences > Advanced > Connection...
*
My "MAX Simultaneous Half-Open TCP Connection" is 10...i just noticed that when i run bitcomet and the scvhost will become like this.



Attached thumbnail(s)
Attached Image
TStan_pang
post Nov 1 2006, 10:14 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(Niuminoid @ Nov 1 2006, 07:09 PM)
My "MAX Simultaneous Half-Open TCP Connection" is 10...i just noticed that when i run bitcomet and the scvhost will become like this.
*
lets compare our Windows Task Manager...
left hand side is your screenshot
and right hand side is mine...
maybe you have some settings goes wrong...

This post has been edited by tan_pang: Nov 1 2006, 10:17 PM


Attached thumbnail(s)
Attached Image
ruztynail
post Nov 2 2006, 02:25 AM

Acrimonious Young Man
******
Senior Member
1,886 posts

Joined: Jan 2005
From: world above you
i dont quiet get it. i see my total individual downloads less thn 20kbs, upload none.. thn i see my top bar thy show 30kbs and 26kbs.. why like tat?? last version bfr 0.70 not like tat ler
yelsew
post Nov 2 2006, 01:12 PM

Getting Started
**
Junior Member
277 posts

Joined: Jun 2005
QUOTE(Niuminoid @ Nov 1 2006, 07:09 PM)
My "MAX Simultaneous Half-Open TCP Connection" is 10...i just noticed that when i run bitcomet and the scvhost will become like this.
*
can u check out ur event viewer there see if there is any "error" log?
(right click on [my computer] choose [manage])


QUOTE(ruztynail @ Nov 2 2006, 02:25 AM)
i dont quiet get it. i see my total individual downloads less thn 20kbs, upload none.. thn i see my top bar thy show 30kbs and 26kbs.. why like tat?? last version bfr 0.70 not like tat ler
*
I wonder it's the interface prob or some other bug(s) or just slow in response... I have that prob 1 or 2 times after I installed 0.75 and reverted back sweat.gif
TStan_pang
post Nov 2 2006, 02:26 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(yelsew @ Nov 2 2006, 01:12 PM)
can u check out ur event viewer there see if there is any "error" log?
(right click on [my computer] choose [manage])
I wonder it's the interface prob or some other bug(s) or just slow in response... I have that prob 1 or 2 times after I installed 0.75 and reverted back  sweat.gif
*
i using v0.75 and love it... thumbup.gif
but you say it is bad... sad.gif

now i still have no any problem when using v0.75

and i didnt have any slow response problem
but it help me connect to tracker faster!!
mun88
post Nov 2 2006, 05:38 PM

Enthusiast
*****
Senior Member
845 posts

Joined: Oct 2006
sad.gif i using DLINK DSL-500T, after upgrade firmware , download speed not increase only can get max to 60+k only sometime down to 9k..not steady.. i using v0.70 icon_question.gif any body can help me to increase download speed with steady ?? i already do portfoward also same...

This post has been edited by mun88: Nov 2 2006, 05:40 PM
jet_tsen
post Nov 2 2006, 06:31 PM

Getting Started
**
Junior Member
242 posts

Joined: Jan 2003
» Click to show Spoiler - click again to hide... «
TStan_pang
post Nov 2 2006, 06:52 PM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(jet_tsen @ Nov 2 2006, 06:31 PM)
QUOTE(mun88 @ Nov 2 2006, 05:38 PM)

sad.gif i using DLINK DSL-500T, after upgrade firmware ,  download speed not increase only can get max to 60+k only sometime down to 9k..not steady.. i using v0.70 icon_question.gif any body can help me to increase download speed with steady ?? i already do portfoward also same...
*
well..im using the same router as you too..but the speed still the same..u r lucky then me..can max 60+k..i dont even reach 30k...arghhh....i do everything like u did too..but is still the same...but sometime ok..can maintain 20 to 30k..stable., sometime less then 10k...
*
jet_tsen are throttle
and mum88 maybe too

mum88, try see are you connected to local peer
and he disconnect??

and also try to check can you get data from other country IP

This post has been edited by tan_pang: Nov 2 2006, 06:54 PM
mun88
post Nov 3 2006, 08:29 AM

Enthusiast
*****
Senior Member
845 posts

Joined: Oct 2006
[quote=tan_pang,Nov 2 2006, 06:52 PM]
well..im using the same router as you too..but the speed still the same..u r lucky then me..can max 60+k..i dont even reach 30k...arghhh....i do everything like u did too..but is still the same...but sometime ok..can maintain 20 to 30k..stable., sometime less then 10k...
*

[/quote]
jet_tsen are throttle
and mum88 maybe too

mum88, try see are you connected to local peer
and he disconnect??

and also try to check can you get data from other country IP
*

[/quote]

how to get other countyry IP???

mine IP sometime is 62...and sometime is 21......
TStan_pang
post Nov 3 2006, 09:22 AM

Look at all my stars!!
*******
Senior Member
3,110 posts

Joined: Jun 2005
QUOTE(mun88 @ Nov 3 2006, 08:29 AM)
how to get other countyry IP???

mine IP sometime is 62...and sometime is 21......
*
62... and 21... is not malaysia ip

there also another way to make your BitComet show up-and-down download speed
maybe you running other downloading task

or maybe your router block your bt connection...
for example:
you limit your download speed to 30kbps. but in fact, you can go to 100kbps
then after a couple of minute or a few of hours
when you set your download limit to 'No Limit'
you will see your download speed go beyond 100kbps
sometimes can even see the no. to 300kbps!!!
then it go back to 100kbps...

PS: next time if write ip address, please write the first 2 or 3 no.
like 60.48.x.x or 218.111.208.x
if juz write down the first no.
we will not know which country connect using that ip

This post has been edited by tan_pang: Nov 3 2006, 09:23 AM
« Next Oldest · Internet Related · Next Newest »
 

6 Pages  1 2 3 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.1568sec    0.55    6 queries    GZIP Disabled
Time is now: 26th November 2025 - 11:26 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.