does anyone know what chip is on mushkin value ram ddr800??
it is relabeled with mushkin logo and it is square

for amd, ram timings or mhz more important?
I know a mixture would be the ideal.
But comparing between 848@4-4-4-12 and 990@5-5-5-12

848@4-4-4-12 give me more performance.
SPI and memory bandwidth

-pWs-

For value its hardly to be good Micron D9 chip..

it's manufactured by some RAM waffer manufacturer... definitely better than AM... no match for D9 and Hynix lar...

what the 1T and 2T command for?

http://forum.lowyat.net/topic/512472

try look at techarp.com

Mine can go 4-4-4-4, 2T @ 2.1v @ 950mhz. Tested it briefly at 1020mhz at 2.2v and it passed superPI (didn't test with memtest or blend test in orthos though)....

planning to get a ballistix soon
which one is better...normal ballistix or tracer??
get some information that tracer is a little bit hot..is it true??

I'm using normal ballistix but I've seen forumers saying that the tracers are a bit hotter due to the LEDs. However, you can overcome this by putting some fans on the rams.....

If you ask me, the normal ballistix is more than enough. However, if you want bling bling, then obviously you should go for the tracer....

how abt crucial 10th anniversary ram ? very nice oc ability

---

Added on September 10, 2007, 2:56 pmya , i dont know wat is that for ? any expert can explain ...

This post has been edited by likito: Sep 10 2007, 02:56 PM

I'm not a ram expert but this is what I understand.....

1T and 2T refers to the command rate - the rate at which commands are issued to the rams. 1T is faster than 2T and as such, it is preferable to set your rams to 1T. However, if you overclock your rams, you might want to set it to 2T so that you can get higher OC, the slower 2T is made up for by the higher speed and bandwidth.

However, this is generally true for DDR rams. For DDR2 rams, they generally run at 2T but ASUS has come up with mobos that can run at 1T, which is slightly faster..... Dunno whether other mobo manufacturers has any such mobo....

Some DDR2 ram modules are also produced to run at 1T......

4GB MICRON D9GMH DDR667 @ 930Mhz @ 4-4-2-1 timing

http://valid.x86-secret.com/show_oc.php?id=240901

Which mobo is that?

look at crucial balistic 667.. 1gb RM190
so if u want pair.. it cost only rm 380

i see the forumer sell at rm460 for pair..

ok.ok.. dont blame me anything.. juz want the opinion.. this is the real crucial.. confusing... really cheap

yesterday, just check out the product at that shop.. and it's 10th ann crucial...
[attachmentid=293371]

Hehe, sorry, my mistaken.

Was actually referring to the super memspeed for the ASUS mobos which has nothing to do with the command rates....

Anyway, AFAIK, only Nvidia chipsets from nForce 600 series and AMD/ATI RD600 chipsets allow using 1T command rate setting.

This post has been edited by kmarc: Sep 11 2007, 10:01 AM

my striker extreme ....

if confirm they got stock in hand , can consider very cheap . sometime they like to play price game .
i didn't 10th ann on the list

Didnt know its possible to go as low as 1.